v2013.07-rc1
Hey all,
I've tagged and pushed v2013.07-rc1. Lots of things all over the place. If you've got changes outstanding still, please start gently poking custodians with patchwork links. I've got a good bit of stuff I need to deal with myself still, but please prod me all the same.
Thanks all!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130614/5421f96d/attachment.pgp>
Hi Tom,
Quoted 7 lines
Hey all,
I've tagged and pushed v2013.07-rc1. Lots of things all over the place. If you've got changes outstanding still, please start gently poking custodians with patchwork links. I've got a good bit of stuff I need to deal with myself still, but please prod me all the same.
I've just made a clean clone of u-boot/master and tried to build my board (after adding what's needed), and then also the omap5_uevm. In both cases the build fails with following error:
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter /Users/imac/Documents/UB2013.07/include -idirafter /Users/imac/Documents/UB2013.07/include2 -idirafter /Users/imac/Documents/UB2013.07/include -I /Users/imac/Documents/UB2013.07/lib/libfdt -I /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o /Users/imac/Documents/UB2013.07/common/image-fit.c /Users/imac/Documents/UB2013.07/common/image-fit.c: In function 'fit_image_load':
/Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error: 'ENOMEDIUM' undeclared (first use in this function) /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [image-fit.o] Error 1
make: *** [tools] Error 2
Lubos-iMac:UB2013.07 imac$
All #include stuff seems OK. Any ideas?
Regards,
Lubo
Hi Lubo,
Quoted 33 lines · Lubomir Popov
Hi Tom,
Quoted 7 lines
Hey all,
I've tagged and pushed v2013.07-rc1. Lots of things all over the place. If you've got changes outstanding still, please start gently poking custodians with patchwork links. I've got a good bit of stuff I need to deal with myself still, but please prod me all the same.
I've just made a clean clone of u-boot/master and tried to build my board (after adding what's needed), and then also the
omap5_uevm. In both cases the build fails with following error:gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter /Users/imac/Documents/UB2013.07/include -idirafter /Users/imac/Documents/UB2013.07/include2 -idirafter /Users/imac/Documents/UB2013.07/include -I /Users/imac/Documents/UB2013.07/lib/libfdt -I /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o /Users/imac/Documents/UB2013.07/common/image-fit.c /Users/imac/Documents/UB2013.07/common/image-fit.c: In function '
fit_image_load':
/Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
'ENOMEDIUM' undeclared (first use in this function) /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each undeclared identifier is reported only once for
each function it appears in
make[1]: *** [image-fit.o] Error 1
make: *** [tools] Error 2
Lubos-iMac:UB2013.07 imac$
Quoted 2 lines
All #include stuff seems OK. Any ideas?
That might be a MacOS thing - I haven't quite had the patience to get a dev environment going on a Mac yet.
Please can you try this patch and see if it helps?
http://patchwork.ozlabs.org/patch/251685/
Regards,
Simon
Quoted 9 lines
Regards,
Lubo_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Simon,
Quoted 40 lines
Hi Lubo,
Quoted 33 lines · Lubomir Popov
Hi Tom,
Quoted 7 lines
Hey all,
I've tagged and pushed v2013.07-rc1. Lots of things all over the place. If you've got changes outstanding still, please start gently poking custodians with patchwork links. I've got a good bit of stuff I need to deal with myself still, but please prod me all the same.
I've just made a clean clone of u-boot/master and tried to build my board (after adding what's needed), and then also the
omap5_uevm. In both cases the build fails with following error:gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter /Users/imac/Documents/UB2013.07/include -idirafter /Users/imac/Documents/UB2013.07/include2 -idirafter /Users/imac/Documents/UB2013.07/include -I /Users/imac/Documents/UB2013.07/lib/libfdt -I /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o /Users/imac/Documents/UB2013.07/common/image-fit.c /Users/imac/Documents/UB2013.07/common/image-fit.c: In function '
fit_image_load':
/Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
'ENOMEDIUM' undeclared (first use in this function) /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each undeclared identifier is reported only once for
each function it appears in
make[1]: *** [image-fit.o] Error 1
make: *** [tools] Error 2
Lubos-iMac:UB2013.07 imac$Quoted 2 lines
All #include stuff seems OK. Any ideas?
Quoted 6 lines
That might be a MacOS thing - I haven't quite had the patience to get a dev environment going on a Mac yet.
Please can you try this patch and see if it helps?
Many thanks for the hint - I didn't realize immediately that this is host stuff. U-boot now builds normally (and runs on my board :)).
BTW, until this release I've been using a Mac at home to build and run U-Boot without any major issues (actually only make distclean fails, which is not crucial).
Thanks,
Lubo
Quoted 15 lines
Regards,
SimonQuoted 9 lines
Regards,
Lubo_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Lubo,
Quoted 55 lines · Lubomir Popov
Hi Simon,
Quoted 3 lines
Hi Lubo,
On Sun, Jun 16, 2013 at 4:49 AM, Lubomir Popov <[email protected]>
Quoted 6 lines · wrote:
Quoted 6 lines
Hi Tom,
Quoted 3 lines
Hey all,
I've tagged and pushed v2013.07-rc1. Lots of things all over the
place.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
If you've got changes outstanding still, please start gently poking custodians with patchwork links. I've got a good bit of stuff I need
to
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
deal with myself still, but please prod me all the same.
I've just made a clean clone of u-boot/master and tried to build my
board
Quoted 1 line
Quoted 1 line
(after adding what's needed), and then also the
omap5_uevm. In bothcases
Quoted 22 lines
Quoted 22 lines
the build fails with following error:
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter /Users/imac/Documents/UB2013.07/include -idirafter /Users/imac/Documents/UB2013.07/include2 -idirafter /Users/imac/Documents/UB2013.07/include -I /Users/imac/Documents/UB2013.07/lib/libfdt -I /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o /Users/imac/Documents/UB2013.07/common/image-fit.c /Users/imac/Documents/UB2013.07/common/image-fit.c: In function '
fit_image_load':
/Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
'ENOMEDIUM' undeclared (first use in this function) /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each undeclared identifier is reported only once for
each function it appears in
make[1]: *** [image-fit.o] Error 1
make: *** [tools] Error 2
Lubos-iMac:UB2013.07 imac$Quoted 4 lines
Quoted 2 lines
All #include stuff seems OK. Any ideas?
That might be a MacOS thing - I haven't quite had the patience to get a
dev
Quoted 5 lines
environment going on a Mac yet.
Please can you try this patch and see if it helps?
Quoted 8 lines
Many thanks for the hint - I didn't realize immediately that this is host stuff. U-boot now builds normally (and runs on my board :)).
BTW, until this release I've been using a Mac at home to build and run U-Boot without any major issues (actually only make distclean fails, which is not crucial).
We have done a few fixes with 'make distclean' before - is this MacOS-specific, or s general bug?
Regards,
Simon
Hello Lubomir, Simon,
Quoted 7 lines · Simon Glass
We have done a few fixes with 'make distclean' before - is this MacOS-specific, or s general bug?
Regards,
Simon
it is on FreeBSD as well so it is likely a sed missing a colon or a find needing a dot. Never bothered enough to track it down though.
Regards,
Jeroen
Hi Simon,
Quoted 63 lines
Hi Lubo,
Quoted 59 lines · Lubomir Popov
Hi Simon,
Quoted 3 lines
Hi Lubo,
On Sun, Jun 16, 2013 at 4:49 AM, Lubomir Popov <[email protected]>
Quoted 6 lines · wrote:
Quoted 6 lines
Hi Tom,
Quoted 3 lines
Hey all,
I've tagged and pushed v2013.07-rc1. Lots of things all over the
place.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
If you've got changes outstanding still, please start gently poking custodians with patchwork links. I've got a good bit of stuff I need
to
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
deal with myself still, but please prod me all the same.
I've just made a clean clone of u-boot/master and tried to build my
board
Quoted 1 line
Quoted 1 line
(after adding what's needed), and then also the
omap5_uevm. In bothcases
Quoted 22 lines
Quoted 22 lines
the build fails with following error:
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter /Users/imac/Documents/UB2013.07/include -idirafter /Users/imac/Documents/UB2013.07/include2 -idirafter /Users/imac/Documents/UB2013.07/include -I /Users/imac/Documents/UB2013.07/lib/libfdt -I /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o /Users/imac/Documents/UB2013.07/common/image-fit.c /Users/imac/Documents/UB2013.07/common/image-fit.c: In function '
fit_image_load':
/Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
'ENOMEDIUM' undeclared (first use in this function) /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each undeclared identifier is reported only once for
each function it appears in
make[1]: *** [image-fit.o] Error 1
make: *** [tools] Error 2
Lubos-iMac:UB2013.07 imac$Quoted 4 lines
Quoted 2 lines
All #include stuff seems OK. Any ideas?
That might be a MacOS thing - I haven't quite had the patience to get a
dev
Quoted 5 lines
environment going on a Mac yet.
Please can you try this patch and see if it helps?
Many thanks for the hint - I didn't realize immediately that this is host stuff. U-boot now builds normally (and runs on my board :)).
Quoted 7 lines
Quoted 4 lines
BTW, until this release I've been using a Mac at home to build and run U-Boot without any major issues (actually only make distclean fails, which is not crucial).
We have done a few fixes with 'make distclean' before - is this MacOS-specific, or s general bug?
Well, I'm not a UNIX expert (nor Linux; in fact I'm more in hardware). I get this:
Lubos-iMac:UB2013.07 imac$ make CROSS_COMPILE=" arm-none-eabi-" distclean
rm: SPL: is a directory
make: *** [clobber] Error 1
Lubos-iMac:UB2013.07 imac$
For OMAP we don't have a 'SPL' file; there is the 'spl' directory however, and although MacOS is case-sensitive, this somehow produces the error in '@rm -f $(obj)SPL' (clobber: of main Makefile).
Quoted 4 lines
Regards,
Simon
Best regards,
Lubo