Skip to contentSkip to conversation

fix uio_pdrv_genirq with device tree but no interrupt

PATCH In review Pavel Machek 2 participants 3 messages Jun 18, 2013 – Jun 19, 2013 Userspace I/O (UIO)

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 fix uio_pdrv_genirq with device tree but no interrupt

If device is initialized from device tree, but has no interrupt assigned, uio will still try to request and interrupt old way, fails, and fails registration.

This is wrong; don't try initializing irq using platform data if device tree is available.

Simplified code based on suggestion by Grant Likely.

Fixed memory leak in "irq can not be registered" error path.

drivers/uio/uio_pdrv_genirq.c +10 -15
index c122bca..d594dd9 100644
@@ -103,24 +103,16 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	int i;
 
 	if (pdev->dev.of_node) {
-		int irq;
-
 		/* alloc uioinfo for one device */
 		uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL);
 		if (!uioinfo) {
 			ret = -ENOMEM;
 			dev_err(&pdev->dev, "unable to kmalloc\n");
-			goto bad2;
+			return ret;
 		}
 		uioinfo->name = pdev->dev.of_node->name;
 		uioinfo->version = "devicetree";
-
 		/* Multiple IRQs are not supported */
-		irq = platform_get_irq(pdev, 0);
-		if (irq == -ENXIO)
-			uioinfo->irq = UIO_IRQ_NONE;
-		else
-			uioinfo->irq = irq;
 	}
 
 	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
@@ -148,12 +140,15 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 
 	if (!uioinfo->irq) {
 		ret = platform_get_irq(pdev, 0);
-		if (ret < 0) {
+		uioinfo->irq = ret;
+		if (ret == -ENXIO && pdev->dev.of_node)
+			uioinfo->irq = UIO_IRQ_NONE;
+		else if (ret < 0) {
 			dev_err(&pdev->dev, "failed to get IRQ\n");
-			goto bad0;
+			goto bad1;
 		}
-		uioinfo->irq = ret;
 	}
+
 	uiomem = &uioinfo->mem[0];
 
 	for (i = 0; i < pdev->num_resources; ++i) {
@@ -206,19 +201,19 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	ret = uio_register_device(&pdev->dev, priv->uioinfo);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register uio device\n");
-		goto bad1;
+		goto bad2;
 	}
 
 	platform_set_drvdata(pdev, priv);
 	return 0;
+ bad2:
+	pm_runtime_disable(&pdev->dev);
  bad1:
 	kfree(priv);
-	pm_runtime_disable(&pdev->dev);
  bad0:
 	/* kfree uioinfo for OF */
 	if (pdev->dev.of_node)
 		kfree(uioinfo);
- bad2:
 	return ret;
 }
 
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
maintainer
#1 lore raw

What's with the odd [uio] in the Subject? What happened to the universal [PATCH 1/2] format?

Ick, I'll fix this up this time, but come on, you know better...

greg k-h

#2 lore raw
Quoted 4 lines · Greg KH

What's with the odd [uio] in the Subject? What happened to the universal [PATCH 1/2] format?

Ick, I'll fix this up this time, but come on, you know better...

Sorry about that. It seems every maintainer has slightly different rules for that... I thought that stuff in [] is normally ignored, so I did not give it too much thought.

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html