Skip to contentSkip to conversation

mpt3sas: Infinite loops can occur if MPI2_IOCSTATUS_CONFIG_INVALID_PAGE is not returned

PATCH In review Sreekanth Reddy 2 participants 2 messages Jun 28, 2013

Subsystems (2)
SCSI LSI Logic MPT fusion drivers (FC/SAS/SPI)
lore
Share & tools
lore
#1 lore raw
In reply to Sreekanth Reddy
Quoted 21 lines · Sreekanth Reddy

Infinite loop can occur if IOCStatus is not equal to MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions _scsih_search_responding_sas_devices, _scsih_search_responding_raid_devices and _scsih_search_responding_expanders

So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value, in this patch code is modified to check for IOCStatus not equals to MPI2_IOCSTATUS_SUCCESS to break the while loop.

Signed-off-by Sreekanth Reddy <[email protected]>
Cc [email protected]
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |   16 ++++------------
 1 files changed, 4 insertions(+), 12 deletions(-)
drivers/scsi/mpt3sas/mpt3sas_scsih.c +0 -0
index 9ebc9dc..632eba7 100644

drivers/scsi/mpt3sas/mpt3sas_scsih.c _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc) · line 6412

Quoted 8 lines
drivers/scsi/mpt3sas/mpt3sas_scsih.c +1 -1
@@ -6406,7 +6406,7 @@ _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
 	    handle))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 			break;
 		handle = le16_to_cpu(sas_device_pg0.DevHandle);
 		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);

Doesn't the same apply to the code mpt2sas driver you copied this code from?

Bjørn
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Sreekanth Reddy

author
#0 lore raw

PATCH 4/7 mpt3sas: Infinite loops can occur if MPI2_IOCSTATUS_CONFIG_INVALID_PAGE is not returned

Infinite loop can occur if IOCStatus is not equal to MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions _scsih_search_responding_sas_devices, _scsih_search_responding_raid_devices and _scsih_search_responding_expanders

So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value, in this patch code is modified to check for IOCStatus not equals to MPI2_IOCSTATUS_SUCCESS to break the while loop.

Signed-off-by Sreekanth Reddy <[email protected]>
Cc [email protected]
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |   16 ++++------------
 1 files changed, 4 insertions(+), 12 deletions(-)
drivers/scsi/mpt3sas/mpt3sas_scsih.c +4 -12
index 9ebc9dc..632eba7 100644
@@ -6406,7 +6406,7 @@ _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
 	    handle))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 			break;
 		handle = le16_to_cpu(sas_device_pg0.DevHandle);
 		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);

@@ -6508,7 +6508,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
 	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 			break;
 		handle = le16_to_cpu(volume_pg1.DevHandle);
 

@@ -6532,7 +6532,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
 		    phys_disk_num))) {
 			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 			    MPI2_IOCSTATUS_MASK;
-			if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 				break;
 			phys_disk_num = pd_pg0.PhysDiskNum;
 			handle = le16_to_cpu(pd_pg0.DevHandle);

@@ -6611,7 +6611,7 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc)
 
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 			break;
 
 		handle = le16_to_cpu(expander_pg0.DevHandle);

@@ -6756,8 +6756,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
 		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
 			pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
 			    "ioc_status(0x%04x), loginfo(0x%08x)\n",

@@ -6801,8 +6799,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 	    phys_disk_num))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
 		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
 			pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
 			    "ioc_status(0x%04x), loginfo(0x%08x)\n",

@@ -6868,8 +6864,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
 		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
 			pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
 			    "ioc_status(0x%04x), loginfo(0x%08x)\n",

@@ -6928,8 +6922,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 	    handle))) {
 		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
 		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
 		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
 			pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
 			    " ioc_status(0x%04x), loginfo(0x%08x)\n",
Signature · 1 line
1.7.3