Testing NPIV Feature with Qemu-KVM
Hi All,
I am testing NPIV feature on upstream Qemu, I have configured the zone and able to see the created vport on the storage array.
Since, I am learning on how to setup the NPIV, I haven't created the different zone for the vport and the array, I just added in the existing zone.
Now, how do pass the LUN to the qemu, from Dr. Hannes Reineckei mail thread I got to know that lspci command on the host doesn't show the virtual HBA.
I didn't understand why there is limitation on that and if I specify /usr/libexec/qemu-kvm -enable-kvm Fedora19 -m 3000 -smp 2 -net nic -net \ user -vnc 127.0.0.1:0 -drive if=scsi,file=/dev/sdj
How do I make sure that qemu is using the virtual HBA or (vport)?
Thanks,
Shastri
Quoted 8 lines · chandrashekar shastri
I am testing NPIV feature on upstream Qemu, I have configured the zone and able to see the created vport on the storage array.
Since, I am learning on how to setup the NPIV, I haven't created the different zone for the vport and the array, I just added in the existing zone.
Now, how do pass the LUN to the qemu, from Dr. Hannes Reineckei mail thread I got to know that lspci command on the host doesn't show the virtual HBA.
Quoted 7 lines
I didn't understand why there is limitation on that and if I specify
/usr/libexec/qemu-kvm-enable-kvm Fedora19 -m 3000 -smp 2 -net nic -net \ user -vnc 127.0.0.1:0 -drive if=scsi,file=/dev/sdjHow do I make sure that qemu is using the virtual HBA or (vport)?
From my limited knowledge of NPIV, after you create the vport on the
host you'll have a new "SCSI host" which scans LUNs. That means new SCSI devices appear on the host.
You can use "ls -al /sys/class/scsi_host" to see the SCSI hosts that are active.
You can use "virsh nodedev-list --tree" to see the details of the devices.
This should help you find the NPIV LUNs which can be passed to QEMU.
Stefan
<snip>
Quoted 8 lines
Quoted 1 line
How do I make sure that qemu is using the virtual HBA or (vport)?
From my limited knowledge of NPIV, after you create the vport on the host you'll have a new "SCSI host" which scans LUNs. That means new SCSI devices appear on the host.
You can use "ls -al
/sys/class/scsi_host" to see the SCSI hosts that are active.
Also, there will be a /sys/class/fc_host, associated with the scsi_host. It will have a port_type, that when read, should show "NPIV VPORT".
//Rob
Quoted 19 lines · Stefan Hajnoczi
Quoted 6 lines · chandrashekar shastri
I am testing NPIV feature on upstream Qemu, I have configured the zone and able to see the created vport on the storage array.
Since, I am learning on how to setup the NPIV, I haven't created the different zone for the vport and the array, I just added in the existing zone.
Quoted 7 lines
Now, how do pass the LUN to the qemu, from Dr. Hannes Reineckei mail thread I got to know that lspci command on the host doesn't show the virtual HBA.
I didn't understand why there is limitation on that and if I specify
/usr/libexec/qemu-kvm-enable-kvm Fedora19 -m 3000 -smp 2 -net nic -net \ user -vnc 127.0.0.1:0 -drive if=scsi,file=/dev/sdjHow do I make sure that qemu is using the virtual HBA or (vport)?
From my limited knowledge of NPIV, after you create the vport on the
host you'll have a new "SCSI host" which scans LUNs. That means new SCSI devices appear on the host.
Quoted 6 lines
You can use "ls -al
/sys/class/scsi_host" to see the SCSI hosts that are active.You can use "virsh nodedev-list --tree" to see the details of the devices.
This should help you find the NPIV LUNs which can be passed to QEMU.
Also, there will be a /sys/class/fc_host, associated with the scsi_host. It will have a port_type, that when read, should show "NPIV VPORT".
//Rob