Skip to contentSkip to conversation

dm thin: do not expose non-zero discard limits if discards are disabled

PATCH New Mike Snitzer 1 participant 1 message Sep 19, 2013 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dm thin: do not expose non-zero discard limits if discards are disabled

Fix issue where the block layer would stack the discard limits of the pool's data device even if the "ignore_discard" pool feature was specified.

The pool and thin device(s) still had discards disabled because the QUEUE_FLAG_DISCARD request_queue flag wasn't set. But to avoid user confusion when "ignore_discard" is used: both the pool device and the thin device(s) have zeroes for all discard limits.

Also, always set discard_zeroes_data_unsupported in targets because they should never advertise the 'discard_zeroes_data' capability (even if the pool's data device supports it).

---
 drivers/md/dm-thin.c |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)
drivers/md/dm-thin.c +11 -3
index ed06342..2c0cf51 100644
@@ -2095,6 +2095,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	 * them down to the data device.  The thin device's discard
 	 * processing will cause mappings to be removed from the btree.
 	 */
+	ti->discard_zeroes_data_unsupported = true;
 	if (pf.discard_enabled && pf.discard_passdown) {
 		ti->num_discard_bios = 1;
 
@@ -2104,7 +2105,6 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
 		 * thin devices' discard limits consistent).
 		 */
 		ti->discards_supported = true;
-		ti->discard_zeroes_data_unsupported = true;
 	}
 	ti->private = pt;
 
@@ -2689,8 +2689,16 @@ static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits)
 	 * They get transferred to the live pool in bind_control_target()
 	 * called from pool_preresume().
 	 */
-	if (!pt->adjusted_pf.discard_enabled)
+	if (!pt->adjusted_pf.discard_enabled) {
+		/*
+		 * Must explicitly disallow stacking discard limits otherwise the
+		 * block layer will stack them if pool's data device has support.
+		 * QUEUE_FLAG_DISCARD wouldn't be set but there is no way for the
+		 * user to see that, so make sure to set all discard limits to 0.
+		 */
+		limits->discard_granularity = 0;
 		return;
+	}
 
 	disable_passdown_if_not_supported(pt);
 
@@ -2826,10 +2834,10 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	ti->per_bio_data_size = sizeof(struct dm_thin_endio_hook);
 
 	/* In case the pool supports discards, pass them on. */
+	ti->discard_zeroes_data_unsupported = true;
 	if (tc->pool->pf.discard_enabled) {
 		ti->discards_supported = true;
 		ti->num_discard_bios = 1;
-		ti->discard_zeroes_data_unsupported = true;
 		/* Discard bios must be split on a block boundary */
 		ti->split_discard_bios = true;
 	}