Skip to contentSkip to conversation

snd_hda_intel headphone output disabling upon complete insertion of plug

DISCUSSION [email protected] 2 participants 3 messages Oct 8, 2013 – Oct 11, 2013

lore
Share & tools
lore
#0 lore raw

Hello list,

Somewhere between 3.11.0-rc7-gfa8218d and 3.12.0-rc4-g8b5ede6 this broke.

The machine is an x61s thinkpad, with the headphone output unmuted and headphones partially inserted sound is audible. If the output is muted, the output shuts off. With the output unmuted, upon inserting the headphone plug fully the output shuts off following a blink of a delay. If I slowly remove the headphone plug returning it to a partially inserted state, the audio returns after another delay.

It seems like a bug in the headphone amplifier power management, as if it's doing the inverse of what it needs to do. I'll try find time to bisect, just wanted to get this out there though in case any of you recognize the problem and know what might have caused it.

Regards,
Vito Caputo

#1 lore raw
Quoted 12 lines · On Tue, Oct 8, 2013 at 2:07 PM, <[email protected]> wrote:

Hello list,

Somewhere between 3.11.0-rc7-gfa8218d and 3.12.0-rc4-g8b5ede6 this broke.

The machine is an x61s thinkpad, with the headphone output unmuted and headphones partially inserted sound is audible. If the output is muted, the output shuts off. With the output unmuted, upon inserting the headphone plug fully the output shuts off following a blink of a delay. If I slowly remove the headphone plug returning it to a partially inserted state, the audio returns after another delay.

Quoted 7 lines

It seems like a bug in the headphone amplifier power management, as if it's doing the inverse of what it needs to do. I'll try find time to bisect, just wanted to get this out there though in case any of you recognize the problem and know what might have caused it.

Regards,
Vito Caputo

Sometimes across kernel revisions I've had problems like this. (Although not that specific one!) It seems that the asound.state file format changes and alsa renumbers their internal controls. You might try saving the existing file elsewhere and then setting up alsa again from scratch. That solved my last problem of that type.

HTH,
Mark

#2 lore raw
Quoted 18 lines · Mark Knecht
Quoted 17 lines · On Tue, Oct 8, 2013 at 2:07 PM, <[email protected]> wrote:

Hello list,

Somewhere between 3.11.0-rc7-gfa8218d and 3.12.0-rc4-g8b5ede6 this broke.

The machine is an x61s thinkpad, with the headphone output unmuted and headphones partially inserted sound is audible. If the output is muted, the output shuts off. With the output unmuted, upon inserting the headphone plug fully the output shuts off following a blink of a delay. If I slowly remove the headphone plug returning it to a partially inserted state, the audio returns after another delay.

It seems like a bug in the headphone amplifier power management, as if it's doing the inverse of what it needs to do. I'll try find time to bisect, just wanted to get this out there though in case any of you recognize the problem and know what might have caused it.

Quoted 9 lines
Quoted 2 lines

Regards,
Vito Caputo

Sometimes across kernel revisions I've had problems like this. (Although not that specific one!) It seems that the asound.state file format changes and alsa renumbers their internal controls. You might try saving the existing file elsewhere and then setting up alsa again from scratch. That solved my last problem of that type.

NAK, has no effect. Looking at the diff between the revisions under sound/pci/hda there appears to be quite a bit of activity. Hopefully I can get around to bisecting this weekend. Leaving the headphones 90% inserted is workable for now.

Regards,
Vito Caputo