Is EP88x board dead or not?
Hello Wolfgang
You deleted the EP88x entry in boards.cfg
at the following commit
commit 1b0757eceddf037aad99ab59217a3a5c215e15d1
Author: Wolfgang Denk <[email protected]> Date: Wed Oct 24 02:36:15 2012 +0000
PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)
These boards have long reached EOL, and there has been no indication of any active users of such hardware for years. Get rid of the dead weight.
You only mentioned about AMX860, c2mon, ETX094, IAD210, LANTEC, SCM in commit log. But you also deleted EP88x.
I suspect you accidentally deleted the entry of EP88x in boards.cfg because:
- EP88x is not found in doc/README.scrapyard
- include/configs/EP88x.h is remaining
- board/ep88x/ is remaining
- I could successfully build EP88x by simply re-adding entry to boards.cfg
Best Regards
Masahiro Yamada
Hi Masahiro,
Quoted 26 lines · Masahiro Yamada
Hello Wolfgang
You deleted the EP88x entry in boards.cfg
at the following commitcommit
1b0757eceddf037aad99ab59217a3a5c215e15d1Author: Wolfgang Denk <[email protected]> Date: Wed Oct 24 02:36:15 2012 +0000PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)
These boards have long reached EOL, and there has been no indication of any active users of such hardware for years. Get rid of the dead weight.
Signed-off-by Wolfgang Denk <[email protected]>Cc Wolfgang Grandegger <[email protected]>You only mentioned about AMX860, c2mon, ETX094, IAD210, LANTEC, SCM in commit log. But you also deleted EP88x.
Quoted 7 lines
I suspect you accidentally deleted the entry of EP88x in boards.cfg because:
- EP88x is not found in doc/README.scrapyard
-include/configs/EP88x.his remaining
- board/ep88x/ is remaining
- I could successfully build EP88x by simply re-adding entry to boards.cfg
(Wolfgang, correct me if I am wrong)
I cannot tell indeed if Wolfgang's removal of ep88x was intentional or not, but two things are sure: prior to its removal by Wolfgang, EP88x did not have any MAINTAINERS entry; and since it was removed, you are the first one to notice.
I would therefore say that if you want EP88x re-introduced, then please step up as the new board maintainer by adding your e-mail address in boards.cfg -- and please do it only if you actually have an EP88x board to test on.
If you don't have an EP88x, or do not plan to be a maintainer for it, and if no one else does either, then the best is to remove it entirely.
Quoted 2 lines
Best Regards
Masahiro Yamada
Amicalement,
Signature · 1 line
Albert.
Hello Albert, Wolfgang.
Quoted 7 lines
I would therefore say that if you want EP88x re-introduced, then please step up as the new board maintainer by adding your e-mail address in boards.cfg -- and please do it only if you actually have an EP88x board to test on.
If you don't have an EP88x, or do not plan to be a maintainer for it, and if no one else does either, then the best is to remove it ent
I neither have the board nor plan to be a maintiner.
Best Regards
Masahiro Yamada
Hello Wolfgang
Quoted 7 lines · On Wed, 16 Oct 2013 11:46:48 +0200 Albert ARIBAUD <[email protected]>…
(Wolfgang, correct me if I am wrong)
I cannot tell indeed if Wolfgang's removal of ep88x was intentional or not, but two things are sure: prior to its removal by Wolfgang, EP88x did not have any
MAINTAINERSentry; and since it was removed, you are the first one to notice.
Quoted 7 lines
I would therefore say that if you want EP88x re-introduced, then please step up as the new board maintainer by adding your e-mail address in boards.cfg -- and please do it only if you actually have an EP88x board to test on.
If you don't have an EP88x, or do not plan to be a maintainer for it, and if no one else does either, then the best is to remove it entirely.
Wolfgang. Any comments about this?
I can post a patch to
- Delete include/configs/EP88x.h
- Delete board/ep88x/*
- Add EP88X to doc/README.scrapyard
Is this OK for you too?
Best Regards
Masahiro Yamada
Dear Masahiro Yamada,
sorry, I missed that thread.
Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 6 lines · On Wed, 16 Oct 2013 11:46:48 +0200 Albert ARIBAUD <[email protected]>…
(Wolfgang, correct me if I am wrong)
I cannot tell indeed if Wolfgang's removal of ep88x was intentional or not, but two things are sure: prior to its removal by Wolfgang, EP88x did not have any
MAINTAINERSentry; and since it was removed, you are the first one to notice.
I have to admit that I cannot tell for sure.
Looking at what happenend I think I ran across the ep88x a bit later in the process of the board removals, intended to remove it, got interrupted, and then forgot to complete it. Sorry for that.
Quoted 12 lines
Quoted 7 lines
I would therefore say that if you want EP88x re-introduced, then please step up as the new board maintainer by adding your e-mail address in boards.cfg -- and please do it only if you actually have an EP88x board to test on.
If you don't have an EP88x, or do not plan to be a maintainer for it, and if no one else does either, then the best is to remove it entirely.
Wolfgang. Any comments about this?
Quoted 6 lines
I can post a patch to
- Deleteinclude/configs/EP88x.h
- Delete board/ep88x/*
- Add EP88X to doc/README.scrapyardIs this OK for you too?
Yes, that would be great. It seems we all agree that this is a dead horse anyway.
Thanks for your careful checking, and thanks for volunteering to complete the board removal. Both is highly appreciated.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The universe is all a spin-off of the Big Bang.