Bluetooth: ath3k: add support for 0930:021c

This is needed for my Toshiba C850-1K0 (AR9462 chip) to discover any Bluetooth devices.

---
 drivers/bluetooth/ath3k.c | 2 ++
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 3 insertions(+)

index 0a327f4..23b813a 100644
@@ -87,6 +87,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },
 	{ USB_DEVICE(0x0930, 0x0219) },
+	{ USB_DEVICE(0x0930, 0x021c) },
 	{ USB_DEVICE(0x0489, 0xe057) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x0489, 0xe04e) },

@@ -129,6 +130,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },

index f3dfc0a..92fe3c00 100644
@@ -154,6 +154,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },

1.8.4.1

Hi Robin,

as usual include the relevant parts from /sys/kernel/debug/usb/devices here.

Am Fri, 18 Oct 2013 18:53:25 +0200
schrieb Marcel Holtmann <[email protected]>:

Hi Marcel!

There you go:

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 4
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.11
S:  Manufacturer=Linux 3.11.5-1-ARCH xhci_hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:00:14.0

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0930 ProdID=021c Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

This is with patched ath3k and btusb modules (and working Bluetooth).

Best regards,
Robin