v2013.10 failed build with jffs2 cmd
Dear Chris Ruehl,
Quoted 2 lines · I wrote:
If everything else fails, use "USE_PRIVATE_LIBGCC=y" on the make command line.
I mean: use "USE_PRIVATE_LIBGCC=yes" on the make command line.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The human race is a race of cowards; and I am not only marching in that procession but carrying a banner. - Mark Twain
Hi Wolfgang,
Quoted 8 lines · Wolfgang Denk
Dear Chris Ruehl,
Quoted 2 lines · I wrote:
If everything else fails, use "USE_PRIVATE_LIBGCC=y" on the make command line.
I mean: use "USE_PRIVATE_LIBGCC=yes" on the make command line.
after I set this option the build failed for
/uboot.d/u-boot-git/arch/arm/lib/libgcc.o -Map u-boot.map -o u-boot fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':/opt/cross_build/uboot.d/u-boot-git/fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'
I mentioned this reference as "root of the evil" before :-)
Chris
Quoted 6 lines
Best regards,
Wolfgang Denk
Signature · 6 lines
GTSYS Limited RFID Technology A01 24/F Gold King Industrial Bld 35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong Fax (852) 8167 4060 - Tel (852) 3598 9488 Disclaimer: http://www.gtsys.com.hk/email/classified.html
FYI
Quoted 14 lines · Chris Ruehl
Hi Wolfgang,
Quoted 8 lines · Wolfgang Denk
Dear Chris Ruehl,
Quoted 2 lines · I wrote:
If everything else fails, use "USE_PRIVATE_LIBGCC=y" on the make command line.
I mean: use "USE_PRIVATE_LIBGCC=yes" on the make command line.
after I set this option the build failed for
Quoted 16 lines
/uboot.d/u-boot-git/arch/arm/lib/libgcc.o -Map u-boot.map -o u-boot
fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':/opt/cross_build/uboot.d/u-boot-git/fs/jffs2/jffs2_1pass.c:1441:
undefined reference to `__aeabi_uldivmod'I mentioned this reference as "root of the evil" before :-)
Chris
Quoted 6 lines
Best regards,
Wolfgang Denk
just to let you know, I open a thread on the linaro tool-chain mail list for this problem.
Chris
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
In reply to Chris RuehlBuilding boards that have JFFS2 support enabled will fail when using U-Boot's builtin GCC library, for example like this:
USE_PRIVATE_LIBGCC=yes ./MAKEALL omap3_evm
...fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'
This is caused by a u64 / u32 division in jffs2_1pass.c; the problem can be avoided by using do_div() instead of plain division.
--- fs/jffs2/jffs2_1pass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/jffs2/jffs2_1pass.c +1 -1
@@ -1438,7 +1438,7 @@ jffs2_1pass_build_lists(struct part_info * part) {struct b_lists *pL;struct jffs2_unknown_node *node; -u32 nr_sectors = part->size/part->sector_size; +u32 nr_sectors =do_div (part->size, part->sector_size);u32 i;u32 counter4 =0 ;u32 counterF =0 ;
Signature · 1 line
1.8.3.1
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
Wolfgang,
GOOD Catch!
Quoted 32 lines · Wolfgang Denk
Building boards that have JFFS2 support enabled will fail when using U-Boot's builtin GCC library, for example like this:
USE_PRIVATE_LIBGCC=yes ./MAKEALL
omap3_evm
...fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'This is caused by a u64 / u32 division in
jffs2_1pass.c; the problem can be avoided by usingdo_div()instead of plain division.Signed-off-by Wolfgang Denk<[email protected]>Reported-by Chris Ruehl<[email protected]>Cc Chris Ruehl<[email protected]>--- fs/jffs2/jffs2_1pass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/jffs2/jffs2_1pass.c +1
-1@@ -1438,7 +1438,7 @@ jffs2_1pass_build_lists(struct part_info * part) {struct b_lists *pL;struct jffs2_unknown_node *node; -u32 nr_sectors = part->size/part->sector_size; +u32 nr_sectors =do_div (part->size, part->sector_size);u32 i;u32 counter4 =0 ;u32 counterF =0 ;
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
Dear Chris,
Quoted 2 lines · In message <[email protected]> you wrote:
GOOD Catch!
Thanks :-)
It would be nice if you could run an actual test on your hardware,and then eventually even provide an Tested-by: ?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If a train station is a place where a train stops,
then what's a workstation?PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
Wolfgang,
Quoted 10 lines · Wolfgang Denk
Dear Chris,
Quoted 2 lines · In message<[email protected]> you wrote:
GOOD Catch!
Thanks :-)
It would be nice if you could run an actual test on your hardware,and then eventually even provide an Tested-by: ?
Yes, I will run the test, later today.
Quoted 5 lines
Best regards,
Wolfgang Denk
Signature · 6 lines
GTSYS Limited RFID Technology A01 24/F Gold King Industrial Bld 35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong Fax (852) 8167 4060 - Tel (852) 3598 9488 Disclaimer: http://www.gtsys.com.hk/email/classified.html
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
In reply to Wolfgang Denk2013/10/27 Wolfgang Denk <[email protected]>:
Quoted 7 lines
Building boards that have JFFS2 support enabled will fail when using U-Boot's builtin GCC library, for example like this:
USE_PRIVATE_LIBGCC=yes ./MAKEALL
omap3_evm
...fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'
I recently noticed a similar problem on MIPS too:
fs/jffs2/libjffs2.o: In function `jffs2_get_list':
jffs2_1pass.c:(.text.jffs2_get_list+0x5c): undefined reference to `__udivdi3'
Your patch solves it, thanks.
Quoted 32 lines
This is caused by a u64 / u32 division in
jffs2_1pass.c; the problem can be avoided by usingdo_div()instead of plain division.Signed-off-by Wolfgang Denk <[email protected]>Reported-by Chris Ruehl <[email protected]>Cc Chris Ruehl <[email protected]>--- fs/jffs2/jffs2_1pass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/jffs2/jffs2_1pass.c +1
-2@@ -1438,7 +1438,7 @@ jffs2_1pass_build_lists(struct part_info * part) {struct b_lists *pL;struct jffs2_unknown_node *node; -u32 nr_sectors = part->size/part->sector_size; +u32 nr_sectors =do_div (part->size, part->sector_size);u32 i;u32 counter4 =0 ;u32 counterF =0 ; --1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Best regards, Daniel
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
In reply to Wolfgang DenkQuoted 8 lines · In message <[email protected]> I wrote:
Building boards that have JFFS2 support enabled will fail when using U-Boot's builtin GCC library, for example like this:
USE_PRIVATE_LIBGCC=yes ./MAKEALL
omap3_evm
...fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'
Quoted 6 lines
This is caused by a u64 / u32 division in
jffs2_1pass.c; the problem can be avoided by usingdo_div()instead of plain division.Signed-off-by Wolfgang Denk <[email protected]>Reported-by Chris Ruehl <[email protected]>Cc Chris Ruehl <[email protected]>
I would like to withdraw this patch.
It appears nobody has been running a MAKEALL with USE_PRIVATE_LIBGCC enabled for a long, long time. There are a number of other places that show similar problems. Instead of fixing these one by one, I think we should rather bundle this.
I'm working on a more complete patch (or patch series).
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Save yourself! Reboot in 5 seconds!
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
Wolfgang,
good morning.
Quoted 22 lines · Wolfgang Denk
Quoted 8 lines · In message <[email protected]> I wrote:
Building boards that have JFFS2 support enabled will fail when using U-Boot's builtin GCC library, for example like this:
USE_PRIVATE_LIBGCC=yes ./MAKEALL
omap3_evm
...fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'Quoted 6 lines
This is caused by a u64 / u32 division in
jffs2_1pass.c; the problem can be avoided by usingdo_div()instead of plain division.Signed-off-by Wolfgang Denk <[email protected]>Reported-by Chris Ruehl <[email protected]>Cc Chris Ruehl <[email protected]>I would like to withdraw this patch.
It appears nobody has been running a MAKEALL with
USE_PRIVATE_LIBGCCenabled for a long, long time. There are a number of other places that show similar problems. Instead of fixing these one by one, I think we should rather bundle this.
Quoted 6 lines
I'm working on a more complete patch (or patch series).
Best regards,
Wolfgang Denk
The test of your patch works with the linaro 2013.09 tool chain.
I had to add the missing header only #include <div64.h> which is required for the build.
fs/jffs2/jffs2_1pass.c +2 -1
@@ -121,6 +121,7 @@#include <jffs2/jffs2_1pass.h> #include <linux/compat.h> #include <asm/errno.h> +#include <div64.h> #include "jffs2_private.h"
@@ -1438,7 +1439,7 @@ jffs2_1pass_build_lists(struct part_info * part) {struct b_lists *pL;struct jffs2_unknown_node *node; -u32 nr_sectors = part->size/part->sector_size; +u32 nr_sectors =do_div (part->size,part->sector_size);u32 i;u32 counter4 =0 ;u32 counterF =0 ;
cd /opt/cross_build/uboot.d/u-boot-git/spl/ && arm-linux-gnueabihf-ld.bfd -T /opt/cross_build/uboot.d/u-boot-git/spl/u-boot-spl.lds --gc-sections --gc-sections -Bstatic -Ttext 0xa0000000 arch/arm/cpu/arm926ejs/start.o --start-group arch/arm/cpu/arm926ejs/libarm926ejs.o arch/arm/cpu/arm926ejs/mx27/libmx27.o arch/arm/imx-common/libimx-common.o arch/arm/lib/libarm.o board/gtsys/common/libgtsys.o board/gtsys/mx27gtsir/libmx27gtsir.o drivers/mtd/nand/libnand.o --end-group /opt/cross_build/uboot.d/u-boot-git/spl/arch/arm/lib/eabi_compat.o /opt/cross_build/uboot.d/u-boot-git/spl/arch/arm/lib/libgcc.o -Map u-boot-spl.map -o u-boot-spl
arm-linux-gnueabihf-objcopy --gap-fill=0xff -O binary /opt/cross_build/uboot.d/u-boot-git/spl/u-boot-spl /opt/cross_build/uboot.d/u-boot-git/spl/u-boot-spl.bin make[1]: Leaving directory `/opt/cross_build/uboot.d/u-boot-git/spl' arm-linux-gnueabihf-objcopy --gap-fill=0xff --pad-to=0x800 -I binary -O binary spl/u-boot-spl.bin spl/u-boot-spl-pad.bin; cat spl/u-boot-spl-pad.bin u-boot.bin > u-boot-with-spl.bin; rm spl/u-boot-spl-pad.bin
Regards
Chris
Gupta
PATCH 1/1 JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
Quoted 54 lines
From: u-boot-bounces at lists.denx.de [mailto:u-boot- Wolfgang,
good morning.
Quoted 12 lines · Wolfgang Denk
Quoted 11 lines · In message <[email protected]> I wrote:
Building boards that have JFFS2 support enabled will fail when using U-Boot's builtin GCC library, for example like this:
USE_PRIVATE_LIBGCC=yes ./MAKEALL
omap3_evm
...fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'This is caused by a u64 / u32 division in
jffs2_1pass.c; the problem can be avoided by usingdo_div()instead of plain division.Quoted 6 lines
Quoted 3 lines
Signed-off-by Wolfgang Denk <[email protected]>Reported-by Chris Ruehl <[email protected]>Cc Chris Ruehl <[email protected]>I would like to withdraw this patch.
It appears nobody has been running a MAKEALL with
USE_PRIVATE_LIBGCCQuoted 10 lines
enabled for a long, long time. There are a number of other places that show similar problems. Instead of fixing these one by one, I think we should rather bundle this.
I'm working on a more complete patch (or patch series).
Best regards,
Wolfgang Denk
The test of your patch works with the linaro 2013.09 tool chain.
I had to add the missing header only #include <
div64.h> which is required for the build.fs/jffs2/jffs2_1pass.c +1
-0@@ -121,6 +121,7 @@#include <jffs2/jffs2_1pass.h> #include <linux/compat.h> #include <asm/errno.h> +#include <div64.h> #include "jffs2_private.h"
fs/jffs2/jffs2_1pass.c jffs2_1pass_build_lists(struct part_info * part) · line 1445
Quoted 8 lines
fs/jffs2/jffs2_1pass.c +1
-1@@ -1438,7 +1439,7 @@ jffs2_1pass_build_lists(struct part_info * part) {struct b_lists *pL;struct jffs2_unknown_node *node; -u32 nr_sectors = part->size/part->sector_size; +u32 nr_sectors =do_div (part->size,part->sector_size);u32 i;u32 counter4 =0 ;u32 counterF =0 ;
Thanks for fixing this..
Please merge this soon, so that ./MAKEALL is clean.
With regards, pekon