Skip to contentSkip to conversation

ARM: shmobile: lager: mark GPIO keys as wake-up sources

PATCH New Magnus Damm 2 participants 4 messages Nov 13, 2013 – Nov 18, 2013

Subsystems (4)
lore
Share & tools
lore

Magnus Damm

author maintainer
#0 lore raw

PATCH 1/1 ARM: shmobile: lager: mark GPIO keys as wake-up sources

From: Shinya Kuribayashi <[email protected]>

Enable wakeup for the GPIO keys on the Lager board.

---

 arch/arm/mach-shmobile/board-lager.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-shmobile/board-lager.c +1 -1
@@ -121,7 +121,7 @@ static const struct gpio_led_platform_da
 /* GPIO KEY */
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
-	  .debounce_interval = 20 }
+	  .wakeup = 1, .debounce_interval = 20 }
 
 static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(1, 28),	"SW2-pin4"),
#1 lore raw

PATCH 1/1 ARM: shmobile: lager: mark GPIO keys as wake-up sources

Quoted 6 lines · Magnus Damm

From: Shinya Kuribayashi <[email protected]>

Enable wakeup for the GPIO keys on the Lager board.

Hi Magnus,

is this relevant to other boards too?

Quoted 21 lines

---

 arch/arm/mach-shmobile/board-lager.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-shmobile/board-lager.c +1 -2
@@ -121,7 +121,7 @@ static const struct gpio_led_platform_da
 /* GPIO KEY */
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
-	  .debounce_interval = 20 }
+	  .wakeup = 1, .debounce_interval = 20 }
 
 static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(1, 28),	"SW2-pin4"),
--

To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

author maintainer
#2 lore raw

PATCH 1/1 ARM: shmobile: lager: mark GPIO keys as wake-up sources

Hi Simon,

Quoted 11 lines · Simon Horman
Quoted 6 lines · Magnus Damm

From: Shinya Kuribayashi <[email protected]>

Enable wakeup for the GPIO keys on the Lager board.

Hi Magnus,

is this relevant to other boards too?

Yes, but I'd like to add the missing pieces for Suspend-to-RAM to other SoCs too before trying to do that. If you want to give it a go, why don't you try to enable it on r8a7779 and Marzen?

Thanks,

/ magnus