Skip to contentSkip to conversation

3.12: omap4: cpuidle: solid hangs at boot

DISCUSSION Paolo Pisati 2 participants 2 messages Nov 14, 2013 – Nov 15, 2013

lore
Share & tools
lore
#0 lore raw

Vanilla 3.12 multi_v7_defconfig + cpu_idle result in a solid hang on my pandaes
board: has anyone experienced it before? is cpu_idle safe on omap4?

same kernel boots fine on omap3 and some other arm boards fwiw. if you want to reproduce it:

config: http://people.canonical.com/~ppisati/3.12_armv7multi_cpuidle/config

zImage: http://people.canonical.com/~ppisati/3.12_armv7multi_cpuidle/zImage

boot log: http://paste.ubuntu.com/6415293/

Signature · 2 lines
bye,
p.
#1 lore raw

+ Kevin

Hi Paolo,

Quoted 2 lines · Paolo Pisati

Vanilla 3.12 multi_v7_defconfig + cpu_idle result in a solid hang on my pandaes
board: has anyone experienced it before? is cpu_idle safe on omap4?

I have also seen the same issue on my panda es board.
On further investigation, it seemed to work on 3.11 and broken between 3.12-rc1 and 3.12-rc2 because of the following patch:
7835027 ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally
(http://www.mail-archive.com/[email protected]/msg94655.html)

But by applying a recent patch from Grygorii Strashko https://patchwork.kernel.org/patch/3084521/
seems to make it work.
You can give a try by applying the given patch.

Kevin, please correct me if I am wrong.

Thanks and regards,
Lokesh

Quoted 10 lines

same kernel boots fine on omap3 and some other arm boards fwiw. if you want to reproduce it:

config: http://people.canonical.com/~ppisati/3.12_armv7multi_cpuidle/config

zImage: http://people.canonical.com/~ppisati/3.12_armv7multi_cpuidle/zImage

boot log: http://paste.ubuntu.com/6415293/