Skip to contentSkip to conversation

ARM: shmobile: koelsch: mark GPIO keys as wake-up sources

PATCH New Magnus Damm 2 participants 2 messages Nov 20, 2013 – Nov 21, 2013

Subsystems (4)
lore
Share & tools
lore

Magnus Damm

author maintainer
#0 lore raw

PATCH 1/1 ARM: shmobile: koelsch: mark GPIO keys as wake-up sources

From: Magnus Damm <[email protected]>

Enable wakeup for the GPIO keys on the Koelsch board.

---

 arch/arm/mach-shmobile/board-koelsch.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-shmobile/board-koelsch.c +1 -1
@@ -57,7 +57,7 @@ static const struct gpio_led_platform_da
 /* GPIO KEY */
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
-	  .debounce_interval = 20 }
+	  .wakeup = 1, .debounce_interval = 20 }
 
 static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(5, 3),	"SW2-pin4"),
#1 lore raw

PATCH 1/1 ARM: shmobile: koelsch: mark GPIO keys as wake-up sources

Quoted 5 lines · Magnus Damm

From: Magnus Damm <[email protected]>

Enable wakeup for the GPIO keys on the Koelsch board.

Thanks, I will queue this up.
Assuming all goes will I plan to push this and other updates today or tomorrow.

Quoted 21 lines

---

 arch/arm/mach-shmobile/board-koelsch.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-shmobile/board-koelsch.c +1 -2
@@ -57,7 +57,7 @@ static const struct gpio_led_platform_da
 /* GPIO KEY */
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
-	  .debounce_interval = 20 }
+	  .wakeup = 1, .debounce_interval = 20 }
 
 static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(5, 3),	"SW2-pin4"),
--

To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html