Skip to contentSkip to conversation

How to build T2080QDS board?

U-Boot Masahiro Yamada 3 participants 3 messages Dec 4, 2013

lore
Share & tools
lore
#0 lore raw

Hello Shengzhou and York.

Commit c4d0e81156a4 added support for T2080QDS board. But I cannot build this board with my crosstool:
https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/x86_64-gcc-4.6.3-nolibc_powerpc-linux.tar.xz

$ CROSS_COMPILE=powerpc-linux-  T2080QDS
--<snip>--
7c8,00000000f00016d7]
powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xeffff000 adjusted to 0xf00016d8
powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xeffffffc adjusted to 0xf0001c50
powerpc-linux-ld.bfd: u-boot: section .u_boot_list lma 0xf00016d8 adjusted to 0xf0001c54
make[1]: *** [u-boot] Error 1
make[1]: Leaving directory `/home/yamada/workspace/u-boot'
make: *** [T2080QDS] Error 2

How can I resolve this error ?

Best Regards
Masahiro Yamada

#1 lore raw
Quoted 19 lines · Masahiro Yamada

Hello Shengzhou and York.

Commit c4d0e81156a4 added support for T2080QDS board. But I cannot build this board with my crosstool:
https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/x86_64-gcc-4.6.3-nolibc_powerpc-linux.tar.xz

$ CROSS_COMPILE=powerpc-linux-  T2080QDS
--<snip>--
7c8,00000000f00016d7]
powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xeffff000 adjusted to 0xf00016d8
powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xeffffffc adjusted to 0xf0001c50
powerpc-linux-ld.bfd: u-boot: section .u_boot_list lma 0xf00016d8 adjusted to 0xf0001c54
make[1]: *** [u-boot] Error 1
make[1]: Leaving directory `/home/yamada/workspace/u-boot'
make: *** [T2080QDS] Error 2
Quoted 2 lines

How can I resolve this error ?

I noticed this error. It was OK when I request the merge. I think something else merged from other repositories increased the overall size. Shengzhou is investigating and will post a patch to fix soon.

York

#2 lore raw

Patch http://patchwork.ozlabs.org/patch/296420/

Thanks,
Shengzhou

Quoted 41 lines

-----Original Message-----
From: York Sun [mailto:yorksun at freescale.com]
Sent: Wednesday, December 04, 2013 12:16 PM
To: Masahiro Yamada; Liu Shengzhou-B36685; u-boot at lists.denx.de
Subject: Re: How to build T2080QDS board?

Quoted 23 lines · Masahiro Yamada

Hello Shengzhou and York.

Commit c4d0e81156a4 added support for T2080QDS board. But I cannot build this board with my crosstool:
https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/x86_
64-gcc-4.6.3-nolibc_powerpc-linux.tar.xz

$ CROSS_COMPILE=powerpc-linux-  T2080QDS
--<snip>--
7c8,00000000f00016d7]
powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xeffff000 adjusted
to 0xf00016d8
powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xeffffffc
adjusted to 0xf0001c50
powerpc-linux-ld.bfd: u-boot: section .u_boot_list lma 0xf00016d8
adjusted to 0xf0001c54
make[1]: *** [u-boot] Error 1
make[1]: Leaving directory `/home/yamada/workspace/u-boot'
make: *** [T2080QDS] Error 2
Quoted 2 lines

How can I resolve this error ?

I noticed this error. It was OK when I request the merge. I think something else merged from other repositories increased the overall size. Shengzhou is investigating and will post a patch to fix soon.

York