Please pull u-boot-ti
Hello,
The following changes since commit a5a42eec8ed64cbc72d2e59199819e48f904e38f:
ARM: fix the standalone programs (2013-12-12 11:27:59 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
for you to fetch changes up to d2c7074b9593d822e2359a09c21747248fdf5fac:
ARM: OMAP5: clocks: Update MPU settings for OPP_NOM (2013-12-12 17:43:39 -0500)
----------------------------------------------------------------
Dan Murphy (1):
arm: am437: Fix offset for USB registers
Heiko Schocher (1):
am335x, siemens boards: adapt default environment setting
Lokesh Vutla (3):
ARM: OMAP4: Move TEXT_BASE down to non-HS limit
ARM: DRA7xx: Change clk divider setting
ARM: OMAP5: clocks: Update MPU settings for OPP_NOM
Nikita Kiryanov (2):
arm: omap: abb: add missing include
arm: omap: cm_t35: update config file
Stefan Roese (5):
arm: omap3: Add SPL support to tao3530
arm: omap3: Remove bootargs mem_size handling
arm: omap3: Add board revision output to tao3530
arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
arm: omap3: Add SPL support to cm_t35
Tapani Utriainen (1):
arm, omap3: Add support for TechNexion modules
Tom Rini (2):
am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
am335x_evm: Consolidate DFU environment parts into the DFU part of the file
Yegor Yefremov (1):
am3517_evm: activate Ethernet PHY
arch/arm/cpu/armv7/am33xx/board.c | 8 + arch/arm/cpu/armv7/omap-common/abb.c | 1 + arch/arm/cpu/armv7/omap5/hw_data.c | 24 +- arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 4 +- arch/arm/include/asm/arch-omap4/omap.h | 2 +- board/compulab/cm_t35/cm_t35.c | 18 +- board/logicpd/am3517evm/am3517evm.c | 32 ++ board/logicpd/am3517evm/am3517evm.h | 2 +- board/siemens/common/board.c | 9 - board/technexion/tao3530/Makefile | 5 + board/technexion/tao3530/tao3530.c | 215 ++++++++++++ board/technexion/tao3530/tao3530.h | 371 ++++++++++++++++++++ boards.cfg | 2 + include/configs/am335x_evm.h | 23 +- include/configs/am3517_evm.h | 5 + include/configs/cm_t35.h | 74 +++- include/configs/omap4_common.h | 11 +- include/configs/siemens-am33x-common.h | 2 +- include/configs/tao3530.h | 363 +++++++++++++++++++ 19 files changed, 1121 insertions(+), 50 deletions(-) create mode 100644 board/technexion/tao3530/Makefile create mode 100644 board/technexion/tao3530/tao3530.c create mode 100644 board/technexion/tao3530/tao3530.h create mode 100644 include/configs/tao3530.h
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/c7722993/attachment.pgp>
Hi Tom,
Quoted 63 lines · Tom Rini
Hello,
The following changes since commit
a5a42eec8ed64cbc72d2e59199819e48f904e38f:ARM: fix the standalone programs (2013-12-12 11:27:59 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-ti.gitmasterfor you to fetch changes up to
d2c7074b9593d822e2359a09c21747248fdf5fac:ARM: OMAP5: clocks: Update MPU settings for
OPP_NOM(2013-12-12 17:43:39 -0500)----------------------------------------------------------------
Dan Murphy (1):
arm: am437: Fix offset for USB registersHeiko Schocher (1):
am335x, siemens boards: adapt default environment settingLokesh Vutla (3):
ARM: OMAP4: MoveTEXT_BASEdown to non-HS limit
ARM: DRA7xx: Change clk divider setting
ARM: OMAP5: clocks: Update MPU settings forOPP_NOMNikita Kiryanov (2):
arm: omap: abb: add missing include
arm: omap:cm_t35: update config fileStefan Roese (5):
arm: omap3: Add SPL support to tao3530
arm: omap3: Remove bootargsmem_sizehandling
arm: omap3: Add board revision output to tao3530
arm: omap3: Add HEAD acoustics (HA) board variantomap3_hato tao3530
arm: omap3: Add SPL support tocm_t35Tapani Utriainen (1):
arm, omap3: Add support for TechNexion modulesTom Rini (2):
am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
am335x_evm: Consolidate DFU environment parts into the DFU part of the fileYegor Yefremov (1):
am3517_evm: activate Ethernet PHYarch/arm/cpu/armv7/am33xx/board.c | 8 + arch/arm/cpu/armv7/omap-common/abb.c | 1 + arch/arm/cpu/armv7/omap5/hw_data.c | 24 +- arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 4 +- arch/arm/include/asm/arch-omap4/omap.h | 2 +- board/compulab/cm_t35/cm_t35.c | 18 +- board/logicpd/am3517evm/am3517evm.c | 32 ++ board/logicpd/am3517evm/am3517evm.h | 2 +- board/siemens/common/board.c | 9 - board/technexion/tao3530/Makefile | 5 + board/technexion/tao3530/tao3530.c | 215 ++++++++++++ board/technexion/tao3530/tao3530.h | 371 ++++++++++++++++++++ boards.cfg | 2 + include/configs/am335x_evm.h | 23 +- include/configs/am3517_evm.h | 5 + include/configs/cm_t35.h | 74 +++-
Quoted 8 lines
include/configs/omap4_common.h | 11 +- include/configs/siemens-am33x-common.h | 2 +- include/configs/tao3530.h | 363 +++++++++++++++++++ 19 files changed, 1121 insertions(+), 50 deletions(-) create mode 100644 board/technexion/tao3530/Makefile create mode 100644 board/technexion/tao3530/tao3530.c create mode 100644 board/technexion/tao3530/tao3530.h create mode 100644 include/configs/tao3530.h
Build-testing.
Meanwhile:
remote: error: refs/remotes/origin/GPL-Cleanup does not point to a valid object!
remote: error: refs/remotes/origin/i.MX31 does not point to a valid object!
remote: error: refs/remotes/origin/lwmon5 does not point to a valid object!
Amicalement,
Signature · 1 line
Albert.
Quoted 78 lines · Albert ARIBAUD
Hi Tom,
Quoted 63 lines · Tom Rini
Hello,
The following changes since commit
a5a42eec8ed64cbc72d2e59199819e48f904e38f:ARM: fix the standalone programs (2013-12-12 11:27:59 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-ti.gitmasterfor you to fetch changes up to
d2c7074b9593d822e2359a09c21747248fdf5fac:ARM: OMAP5: clocks: Update MPU settings for
OPP_NOM(2013-12-12 17:43:39 -0500)----------------------------------------------------------------
Dan Murphy (1):
arm: am437: Fix offset for USB registersHeiko Schocher (1):
am335x, siemens boards: adapt default environment settingLokesh Vutla (3):
ARM: OMAP4: MoveTEXT_BASEdown to non-HS limit
ARM: DRA7xx: Change clk divider setting
ARM: OMAP5: clocks: Update MPU settings forOPP_NOMNikita Kiryanov (2):
arm: omap: abb: add missing include
arm: omap:cm_t35: update config fileStefan Roese (5):
arm: omap3: Add SPL support to tao3530
arm: omap3: Remove bootargsmem_sizehandling
arm: omap3: Add board revision output to tao3530
arm: omap3: Add HEAD acoustics (HA) board variantomap3_hato tao3530
arm: omap3: Add SPL support tocm_t35Tapani Utriainen (1):
arm, omap3: Add support for TechNexion modulesTom Rini (2):
am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
am335x_evm: Consolidate DFU environment parts into the DFU part of the fileYegor Yefremov (1):
am3517_evm: activate Ethernet PHYarch/arm/cpu/armv7/am33xx/board.c | 8 + arch/arm/cpu/armv7/omap-common/abb.c | 1 + arch/arm/cpu/armv7/omap5/hw_data.c | 24 +- arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 4 +- arch/arm/include/asm/arch-omap4/omap.h | 2 +- board/compulab/cm_t35/cm_t35.c | 18 +- board/logicpd/am3517evm/am3517evm.c | 32 ++ board/logicpd/am3517evm/am3517evm.h | 2 +- board/siemens/common/board.c | 9 - board/technexion/tao3530/Makefile | 5 + board/technexion/tao3530/tao3530.c | 215 ++++++++++++ board/technexion/tao3530/tao3530.h | 371 ++++++++++++++++++++ boards.cfg | 2 + include/configs/am335x_evm.h | 23 +- include/configs/am3517_evm.h | 5 + include/configs/cm_t35.h | 74 +++-Quoted 8 lines
include/configs/omap4_common.h | 11 +- include/configs/siemens-am33x-common.h | 2 +- include/configs/tao3530.h | 363 +++++++++++++++++++ 19 files changed, 1121 insertions(+), 50 deletions(-) create mode 100644 board/technexion/tao3530/Makefile create mode 100644 board/technexion/tao3530/tao3530.c create mode 100644 board/technexion/tao3530/tao3530.h create mode 100644 include/configs/tao3530.hBuild-testing.
Quoted 8 lines
Meanwhile:
remote: error: refs/remotes/origin/GPL-Cleanup does not point to a valid object!
remote: error: refs/remotes/origin/i.MX31 does not point to a valid object!
remote: error: refs/remotes/origin/lwmon5 does not point to a valid object!
Wolfgang, any idea about this part?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/2eafbb24/attachment.pgp>
Dear Tom,
Quoted 9 lines · In message <20131213133732.GF420@bill-the-cat> you wrote:
Quoted 7 lines
remote: error: refs/remotes/origin/GPL-Cleanup does not point to a valid object!
remote: error: refs/remotes/origin/i.MX31 does not point to a valid object!
remote: error: refs/remotes/origin/lwmon5 does not point to a valid object!Wolfgang, any idea about this part?
Oops. Sory for the late response. Should be fixed now (I ran a "git remote prune origin" to get rid of the stale branches).
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Simplicity boils down to two steps: Identify the essential. Eliminate the rest. - Leo Babauta
Hi Tom,
Quoted 63 lines · Tom Rini
Hello,
The following changes since commit
a5a42eec8ed64cbc72d2e59199819e48f904e38f:ARM: fix the standalone programs (2013-12-12 11:27:59 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-ti.gitmasterfor you to fetch changes up to
d2c7074b9593d822e2359a09c21747248fdf5fac:ARM: OMAP5: clocks: Update MPU settings for
OPP_NOM(2013-12-12 17:43:39 -0500)----------------------------------------------------------------
Dan Murphy (1):
arm: am437: Fix offset for USB registersHeiko Schocher (1):
am335x, siemens boards: adapt default environment settingLokesh Vutla (3):
ARM: OMAP4: MoveTEXT_BASEdown to non-HS limit
ARM: DRA7xx: Change clk divider setting
ARM: OMAP5: clocks: Update MPU settings forOPP_NOMNikita Kiryanov (2):
arm: omap: abb: add missing include
arm: omap:cm_t35: update config fileStefan Roese (5):
arm: omap3: Add SPL support to tao3530
arm: omap3: Remove bootargsmem_sizehandling
arm: omap3: Add board revision output to tao3530
arm: omap3: Add HEAD acoustics (HA) board variantomap3_hato tao3530
arm: omap3: Add SPL support tocm_t35Tapani Utriainen (1):
arm, omap3: Add support for TechNexion modulesTom Rini (2):
am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
am335x_evm: Consolidate DFU environment parts into the DFU part of the fileYegor Yefremov (1):
am3517_evm: activate Ethernet PHYarch/arm/cpu/armv7/am33xx/board.c | 8 + arch/arm/cpu/armv7/omap-common/abb.c | 1 + arch/arm/cpu/armv7/omap5/hw_data.c | 24 +- arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 4 +- arch/arm/include/asm/arch-omap4/omap.h | 2 +- board/compulab/cm_t35/cm_t35.c | 18 +- board/logicpd/am3517evm/am3517evm.c | 32 ++ board/logicpd/am3517evm/am3517evm.h | 2 +- board/siemens/common/board.c | 9 - board/technexion/tao3530/Makefile | 5 + board/technexion/tao3530/tao3530.c | 215 ++++++++++++ board/technexion/tao3530/tao3530.h | 371 ++++++++++++++++++++ boards.cfg | 2 + include/configs/am335x_evm.h | 23 +- include/configs/am3517_evm.h | 5 + include/configs/cm_t35.h | 74 +++-
Quoted 9 lines
include/configs/omap4_common.h | 11 +- include/configs/siemens-am33x-common.h | 2 +- include/configs/tao3530.h | 363 +++++++++++++++++++ 19 files changed, 1121 insertions(+), 50 deletions(-) create mode 100644 board/technexion/tao3530/Makefile create mode 100644 board/technexion/tao3530/tao3530.c create mode 100644 board/technexion/tao3530/tao3530.h create mode 100644 include/configs/tao3530.h
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.