SubmittingPatches: Document the use of git
PATCH 3/3 SubmittingPatches: Document the use of git
Most of the mechanical portions of SubmittingPatches exist to help patch submitters replicate the output of git. Mention this explicitly, both as a reminder that git will help with this process, and as signposting to let git users know what they can safely skip.
--- Documentation/SubmittingPatches | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)
Documentation/SubmittingPatches +16 -15
@@ -14,7 +14,10 @@ Read Documentation/SubmitChecklist for a list of items to check before submitting code. If you are submitting a driver, also read Documentation/SubmittingDrivers. - +Many of these steps describe the default behavior of the git version +control system; if you use git to prepare your patches, you'll find much +of the mechanical work done for you, though you'll still need to prepare +and document a sensible set of patches. -------------------------------------------- SECTION 1 - CREATING AND SENDING YOUR CHANGE
@@ -25,7 +28,9 @@ SECTION 1 - CREATING AND SENDING YOUR CHANGE 1) "diff -up" ------------ -Use "diff -up" or "diff -uprN" to create patches. +Use "diff -up" or "diff -uprN" to create patches. git generates patches +in this form by default; if you're using git, you can skip this section +entirely. All changes to the Linux kernel occur in the form of patches, as generated by diff(1). When creating your patch, make sure to create it
@@ -66,19 +71,14 @@ Make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch -after- generated it with diff(1), to ensure accuracy. -If your changes produce a lot of deltas, you may want to look into -splitting them into individual patches which modify things in -logical stages. This will facilitate easier reviewing by other -kernel developers, very important if you want your patch accepted. -There are a number of scripts which can aid in this: - -Quilt: -http://savannah.nongnu.org/projects/quilt +If your changes produce a lot of deltas, you need to split them into +individual patches which modify things in logical stages; see section +#3. This will facilitate easier reviewing by other kernel developers, +very important if you want your patch accepted. -Andrew Morton's patch scripts: -http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz -Instead of these scripts, quilt is the recommended patch management -tool (see above). +If you're using git, "git rebase -i" can help you with this process. If +you're not using git, quilt <http://savannah.nongnu.org/projects/quilt> +is another popular alternative.
@@ -607,7 +607,8 @@ patch. If you are going to include a diffstat after the "---" marker, please use diffstat options "-p 1 -w 70" so that filenames are listed from the top of the kernel source tree and don't use too much horizontal -space (easily fit in 80 columns, maybe with some indentation). +space (easily fit in 80 columns, maybe with some indentation). (git +generates appropriate diffstats by default.) See more details on the proper patch format in the following references.
Signature · 1 line
1.8.5.1
Quoted 6 lines · Josh Triplett
Most of the mechanical portions of SubmittingPatches exist to help patch submitters replicate the output of git. Mention this explicitly, both as a reminder that git will help with this process, and as signposting to let git users know what they can safely skip.
Signed-off-by Josh Triplett <[email protected]>
Very good idea!
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--Randy Dunlap
reviewerQuoted 38 lines · Josh Triplett
Most of the mechanical portions of SubmittingPatches exist to help patch submitters replicate the output of git. Mention this explicitly, both as a reminder that git will help with this process, and as signposting to let git users know what they can safely skip.
Signed-off-by Josh Triplett <[email protected]>--- Documentation/SubmittingPatches | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)Documentation/SubmittingPatches +7
-2@@ -14,7 +14,10 @@ Read Documentation/SubmitChecklist for a list of items to check before submitting code. If you are submitting a driver, also read Documentation/SubmittingDrivers. - +Many of these steps describe the default behavior of the git version +control system; if you use git to prepare your patches, you'll find much +of the mechanical work done for you, though you'll still need to prepare +and document a sensible set of patches. -------------------------------------------- SECTION 1 - CREATING AND SENDING YOUR CHANGE@@ -25,7 +28,9 @@ SECTION 1 - CREATING AND SENDING YOUR CHANGE 1) "diff -up" ------------ -Use "diff -up" or "diff -uprN" to create patches. +Use "diff -up" or "diff -uprN" to create patches. git generates patches +in this form by default; if you're using git, you can skip this section +entirely. All changes to the Linux kernel occur in the form of patches, as generated by diff(1). When creating your patch, make sure to create it
Documentation/SubmittingPatches Make sure your patch does not include any extra files which do not · line 74
Quoted 9 lines
Documentation/SubmittingPatches +0
-6@@ -66,19 +71,14 @@ Make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch -after- generated it with diff(1), to ensure accuracy. -If your changes produce a lot of deltas, you may want to look into -splitting them into individual patches which modify things in -logical stages. This will facilitate easier reviewing by other -kernel developers, very important if you want your patch accepted. -There are a number of scripts which can aid in this: -
I object to the removal of the quilt reference. git is overkill for simple patches.
Quoted 28 lines
Documentation/SubmittingPatches +9
-7-Quilt: -http://savannah.nongnu.org/projects/quilt +If your changes produce a lot of deltas, you need to split them into +individual patches which modify things in logical stages; see section +#3. This will facilitate easier reviewing by other kernel developers, +very important if you want your patch accepted. -Andrew Morton's patch scripts: -http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz -Instead of these scripts, quilt is the recommended patch management -tool (see above). +If you're using git, "git rebase -i" can help you with this process. If +you're not using git, quilt <http://savannah.nongnu.org/projects/quilt> +is another popular alternative.@@ -607,7 +607,8 @@ patch. If you are going to include a diffstat after the "---" marker, please use diffstat options "-p 1 -w 70" so that filenames are listed from the top of the kernel source tree and don't use too much horizontal -space (easily fit in 80 columns, maybe with some indentation). +space (easily fit in 80 columns, maybe with some indentation). (git +generates appropriate diffstats by default.) See more details on the proper patch format in the following references.
Signature · 1 line
~Randy
Randy Dunlap
reviewerQuoted 42 lines · Randy Dunlap
Quoted 41 lines · Josh Triplett
Most of the mechanical portions of SubmittingPatches exist to help patch submitters replicate the output of git. Mention this explicitly, both as a reminder that git will help with this process, and as signposting to let git users know what they can safely skip.
Signed-off-by Josh Triplett <[email protected]>--- Documentation/SubmittingPatches | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)Documentation/SubmittingPatches +7
-2@@ -14,7 +14,10 @@ Read Documentation/SubmitChecklist for a list of items to check before submitting code. If you are submitting a driver, also read Documentation/SubmittingDrivers. - +Many of these steps describe the default behavior of the git version +control system; if you use git to prepare your patches, you'll find much +of the mechanical work done for you, though you'll still need to prepare +and document a sensible set of patches. -------------------------------------------- SECTION 1 - CREATING AND SENDING YOUR CHANGE@@ -25,7 +28,9 @@ SECTION 1 - CREATING AND SENDING YOUR CHANGE 1) "diff -up" ------------ -Use "diff -up" or "diff -uprN" to create patches. +Use "diff -up" or "diff -uprN" to create patches. git generates patches +in this form by default; if you're using git, you can skip this section +entirely. All changes to the Linux kernel occur in the form of patches, as generated by diff(1). When creating your patch, make sure to create it@@ -66,19 +71,14 @@ Make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch -after- generated it with diff(1), to ensure accuracy.
Quoted 9 lines
Documentation/SubmittingPatches Make sure your patch does not include any extra files which do not · line 74
Quoted 6 lines
Documentation/SubmittingPatches +0
-6-If your changes produce a lot of deltas, you may want to look into -splitting them into individual patches which modify things in -logical stages. This will facilitate easier reviewing by other -kernel developers, very important if you want your patch accepted. -There are a number of scripts which can aid in this: -I object to the removal of the quilt reference. git is overkill for simple patches.
bah humbug. Sorry, I missed the movement of the quilt reference.
Quoted 30 lines
Quoted 28 lines
Documentation/SubmittingPatches +9
-7-Quilt: -http://savannah.nongnu.org/projects/quilt +If your changes produce a lot of deltas, you need to split them into +individual patches which modify things in logical stages; see section +#3. This will facilitate easier reviewing by other kernel developers, +very important if you want your patch accepted. -Andrew Morton's patch scripts: -http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz -Instead of these scripts, quilt is the recommended patch management -tool (see above). +If you're using git, "git rebase -i" can help you with this process. If +you're not using git, quilt <http://savannah.nongnu.org/projects/quilt> +is another popular alternative.@@ -607,7 +607,8 @@ patch. If you are going to include a diffstat after the "---" marker, please use diffstat options "-p 1 -w 70" so that filenames are listed from the top of the kernel source tree and don't use too much horizontal -space (easily fit in 80 columns, maybe with some indentation). +space (easily fit in 80 columns, maybe with some indentation). (git +generates appropriate diffstats by default.) See more details on the proper patch format in the following references.
Signature · 1 line
~Randy
Quoted 53 lines · Randy Dunlap
Quoted 42 lines · Randy Dunlap
Quoted 41 lines · Josh Triplett
Most of the mechanical portions of SubmittingPatches exist to help patch submitters replicate the output of git. Mention this explicitly, both as a reminder that git will help with this process, and as signposting to let git users know what they can safely skip.
Signed-off-by Josh Triplett <[email protected]>--- Documentation/SubmittingPatches | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)Documentation/SubmittingPatches +7
-2@@ -14,7 +14,10 @@ Read Documentation/SubmitChecklist for a list of items to check before submitting code. If you are submitting a driver, also read Documentation/SubmittingDrivers. - +Many of these steps describe the default behavior of the git version +control system; if you use git to prepare your patches, you'll find much +of the mechanical work done for you, though you'll still need to prepare +and document a sensible set of patches. -------------------------------------------- SECTION 1 - CREATING AND SENDING YOUR CHANGE@@ -25,7 +28,9 @@ SECTION 1 - CREATING AND SENDING YOUR CHANGE 1) "diff -up" ------------ -Use "diff -up" or "diff -uprN" to create patches. +Use "diff -up" or "diff -uprN" to create patches. git generates patches +in this form by default; if you're using git, you can skip this section +entirely. All changes to the Linux kernel occur in the form of patches, as generated by diff(1). When creating your patch, make sure to create it@@ -66,19 +71,14 @@ Make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch -after- generated it with diff(1), to ensure accuracy.Quoted 9 lines
Documentation/SubmittingPatches Make sure your patch does not include any extra files which do not · line 74
Quoted 6 lines
Documentation/SubmittingPatches +0
-6-If your changes produce a lot of deltas, you may want to look into -splitting them into individual patches which modify things in -logical stages. This will facilitate easier reviewing by other -kernel developers, very important if you want your patch accepted. -There are a number of scripts which can aid in this: -I object to the removal of the quilt reference. git is overkill for simple patches.
Quoted 1 line
bah humbug. Sorry, I missed the movement of the quilt reference.
Yeah, I intentionally kept the reference to quilt, on the theory that a user who can't use git for some reason is better off using quilt than trying to manage and reorganize patches by hand. I just rearranged it slightly. "git diff --color-words" was a far better way to review this particular change.
Quoted 34 lines
Quoted 30 lines
Quoted 28 lines
Documentation/SubmittingPatches +9
-7-Quilt: -http://savannah.nongnu.org/projects/quilt +If your changes produce a lot of deltas, you need to split them into +individual patches which modify things in logical stages; see section +#3. This will facilitate easier reviewing by other kernel developers, +very important if you want your patch accepted. -Andrew Morton's patch scripts: -http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz -Instead of these scripts, quilt is the recommended patch management -tool (see above). +If you're using git, "git rebase -i" can help you with this process. If +you're not using git, quilt <http://savannah.nongnu.org/projects/quilt> +is another popular alternative.@@ -607,7 +607,8 @@ patch. If you are going to include a diffstat after the "---" marker, please use diffstat options "-p 1 -w 70" so that filenames are listed from the top of the kernel source tree and don't use too much horizontal -space (easily fit in 80 columns, maybe with some indentation). +space (easily fit in 80 columns, maybe with some indentation). (git +generates appropriate diffstats by default.) See more details on the proper patch format in the following references.Signature · 1 line
~Randy