Skip to contentSkip to conversation

drm/i2c: tda998x: adjust the audio clock divider for S/PDIF

PATCH Superseded Jean-Francois Moine 1 participant 1 message Jan 9, 2014

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 27/28 drm/i2c: tda998x: adjust the audio clock divider for S/PDIF

The S/PDIF input asks for a greater audio clock divider.

---
 drivers/gpu/drm/i2c/tda998x_drv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i2c/tda998x_drv.c +5 -1
index d3b3f3a..67d7450 100644
@@ -757,6 +757,10 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 					AIP_CNTRL_0_ACR_MAN);
 	reg_write(priv, REG_CTS_N, cts_n);
 
+	/* S/PDIF asks for a large divider */
+	if (priv->audio_type == (AFMT_SPDIF | AUDIO_ACTIVE))
+		adiv = AUDIO_DIV_SERCLK_32;
+
 	/*
 	 * Audio input somehow depends on HDMI line rate which is
 	 * related to pixclk. Testing showed that modes with pixclk
@@ -764,7 +768,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 	 * There is no detailed info in the datasheet, so we just
 	 * assume 100MHz requires larger divider.
 	 */
-	if (mode->clock > 100000)
+	else if (mode->clock > 100000)
 		adiv = AUDIO_DIV_SERCLK_16;
 	else
 		adiv = AUDIO_DIV_SERCLK_8;
Signature · 2 lines
Ken ar c'henta?	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/