Need help with audio gain on an Intel HDA equipt ASUS M2N-SLI Deluxe
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAN8ccib-LkLFrngsNwaFFuAW97JiQVu7R25g7yrtgfDVe_mM=g@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
2014/1/16 Axel Braun <[email protected]>
Quoted 5 lines
Am Donnerstag, 16. Januar 2014, 09:03:25 schrieb Raymond Yau:
Quoted 4 lines
Post the output of
pactl list
Quoted 8 lines
Quoted 1 line
pulseaudio verbose log
I jump in here as well, same problem on a ThinkPad T520, sound volume is way
too low - watching movie via loudspeakers is fairly impossible.Any hint you could give me?
post the output of alsa-info.sh , there is a bug in alsa-driver which treat dock headphone and headphone to support surround 4.0
Profile:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0,
priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1,
sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0
Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
A message that is not in the archive (sent off-list or not yet received): [email protected]
2014/1/16 Axel Braun <[email protected]>
Quoted 8 lines
Am Donnerstag, 16. Januar 2014, 16:23:19 schrieb Raymond Yau:
Quoted 3 lines
Any hint you could give me?
post the output of
alsa-info.sh, there is a bug in alsa-driver whichtreat
Quoted 1 line
dock headphone and headphone to support surround 4.0
/sys/class/sound/hwC0D0/init_pin_configs:
0x19 0x042110400x1a 0x61a190500x1b 0x04a110600x1c 0x6121401f0x1d 0x40f001f00x1e 0x40f001f00x1f 0x901701100x20 0x40f001f00x22 0x40f001f00x23 0x90a60170
/sys/class/sound/hwC0D0/driver_pin_configs:0x19 0x042110ff0x1a 0x21a190f00x1c 0x212140ff
it was using auto but now the driver modify the dock headphone , dock mic and headphone pin default.
there are also changes in the thinkpad_acpi module too.
do this thinkpad support headset or headphone ?
it is strange that speaker volume is at max but amp out vals at node 0x11 is 0x3d instead of 0x4a (0dB)
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 74
Mono: Playback 61 [82%] [-13.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 0 [0%] [-74.00dB] [off] Front Right: Playback 0 [0%] [-74.00dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on] Front Right: Playback 74 [100%] [0.00dB] [on]
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20590 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3d 0x3d]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x80 0x80]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS
Power: setting=D0, actual=D0