Linux 3.13.2
Greg KH
maintainerI'm announcing the release of the 3.13.2 kernel.
All users of the 3.13 kernel series must upgrade.
The updated 3.13.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.13.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/devicetree/bindings/ata/marvell.txt | 2 Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt | 6 Documentation/i2c/busses/i2c-piix4 | 2 Makefile | 2 arch/alpha/lib/csum_partial_copy.c | 9 arch/arm/boot/dts/armada-370-xp.dtsi | 2 arch/arm/boot/dts/at91sam9g45.dtsi | 2 arch/arm/mach-at91/sam9_smc.c | 2 arch/arm/mach-mvebu/Makefile | 2 arch/arm/mach-mvebu/armada-370-xp.c | 32 + arch/arm/mach-mvebu/mvebu-soc-id.c | 119 ++++++ arch/arm/mach-mvebu/mvebu-soc-id.h | 32 + arch/parisc/include/asm/cacheflush.h | 2 arch/parisc/include/asm/page.h | 3 arch/parisc/kernel/cache.c | 14 arch/powerpc/include/asm/topology.h | 10 arch/powerpc/kernel/cacheinfo.c | 3 arch/powerpc/kvm/book3s_hv.c | 7 arch/powerpc/kvm/e500_mmu.c | 2 arch/powerpc/mm/numa.c | 70 +++ arch/s390/include/asm/compat.h | 3 arch/s390/include/uapi/asm/statfs.h | 10 arch/s390/kvm/diag.c | 4 arch/s390/kvm/kvm-s390.c | 25 - arch/s390/kvm/kvm-s390.h | 4 arch/s390/kvm/sigp.c | 15 arch/x86/include/asm/kvm_para.h | 33 - arch/x86/include/uapi/asm/msr-index.h | 1 arch/x86/kernel/cpu/amd.c | 10 arch/x86/kernel/kvm.c | 32 + arch/x86/kvm/i8254.c | 18 arch/x86/kvm/lapic.c | 3 arch/x86/kvm/x86.c | 3 arch/x86/kvm/x86.h | 2 arch/x86/platform/efi/efi.c | 2 drivers/ata/libata-core.c | 27 + drivers/ata/libata-scsi.c | 18 drivers/ata/sata_mv.c | 25 + drivers/char/tpm/tpm_i2c_stm_st33.c | 7 drivers/char/tpm/tpm_ppi.c | 8 drivers/edac/e752x_edac.c | 4 drivers/hwmon/k10temp.c | 1 drivers/i2c/busses/Kconfig | 1 drivers/i2c/busses/i2c-mv64xxx.c | 5 drivers/i2c/busses/i2c-piix4.c | 28 + drivers/md/bcache/bset.c | 26 + drivers/mfd/max77686.c | 2 drivers/misc/mei/hbm.c | 19 + drivers/misc/mei/hbm.h | 1 drivers/misc/mei/init.c | 12 drivers/misc/mei/interrupt.c | 25 - drivers/misc/mic/host/mic_device.h | 3 drivers/misc/mic/host/mic_main.c | 2 drivers/misc/mic/host/mic_virtio.c | 2 drivers/misc/mic/host/mic_x100.c | 36 + drivers/mmc/host/sdhci-esdhc-imx.c | 12 drivers/mmc/host/sdhci-pci.c | 1 drivers/mmc/host/sdhci.c | 23 - drivers/net/vxlan.c | 20 - drivers/net/wireless/ath/ath9k/hw.c | 7 drivers/net/wireless/ath/ath9k/recv.c | 25 - drivers/net/wireless/b43/b43.h | 4 drivers/net/wireless/b43/main.c | 27 - drivers/net/wireless/b43/xmit.c | 4 drivers/net/wireless/b43legacy/main.c | 1 drivers/net/wireless/iwlwifi/iwl-prph.h | 4 drivers/net/wireless/iwlwifi/mvm/ops.c | 1 drivers/net/wireless/iwlwifi/pcie/trans.c | 22 + drivers/net/wireless/mwifiex/fw.h | 2 drivers/net/wireless/mwifiex/scan.c | 4 drivers/net/wireless/rtlwifi/base.c | 3 drivers/net/wireless/rtlwifi/core.c | 11 drivers/net/wireless/rtlwifi/rtl8188ee/dm.c | 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 327 ++++++++++++------ drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h | 14 drivers/net/wireless/rtlwifi/rtl8192cu/dm.c | 9 drivers/net/wireless/rtlwifi/rtl8192cu/dm.h | 3 drivers/net/wireless/rtlwifi/rtl8192cu/rf.c | 29 - drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 17 drivers/net/wireless/rtlwifi/stats.c | 14 drivers/net/wireless/rtlwifi/usb.c | 4 drivers/net/wireless/rtlwifi/wifi.h | 33 - drivers/net/xen-netfront.c | 88 +--- drivers/parport/parport_pc.c | 10 drivers/pinctrl/pinctrl-sunxi.c | 13 drivers/platform/x86/hp_accel.c | 1 drivers/rtc/rtc-max8907.c | 11 drivers/scsi/bfa/bfad.c | 6 drivers/scsi/qla4xxx/ql4_os.c | 11 drivers/scsi/virtio_scsi.c | 15 drivers/staging/lustre/lustre/ptlrpc/niobuf.c | 6 drivers/staging/rtl8712/usb_intf.c | 5 drivers/staging/vt6656/baseband.c | 3 drivers/staging/vt6656/card.c | 2 drivers/staging/zram/zram_drv.c | 4 drivers/target/iscsi/iscsi_target.c | 34 + drivers/target/iscsi/iscsi_target_nego.c | 2 drivers/tty/Kconfig | 2 drivers/tty/serial/8250/8250_core.c | 4 drivers/tty/serial/8250/8250_pci.c | 8 drivers/tty/serial/atmel_serial.c | 45 +- drivers/uio/uio.c | 2 drivers/usb/chipidea/ci.h | 26 + drivers/usb/chipidea/ci_hdrc_imx.c | 32 + drivers/usb/chipidea/core.c | 2 drivers/usb/chipidea/host.c | 1 drivers/usb/chipidea/otg.h | 6 drivers/usb/chipidea/udc.c | 19 - drivers/usb/class/cdc-wdm.c | 70 ++- drivers/usb/core/config.c | 7 drivers/usb/core/hub.c | 53 -- drivers/usb/dwc3/dwc3-exynos.c | 1 drivers/usb/dwc3/dwc3-pci.c | 1 drivers/usb/host/ehci.h | 18 drivers/usb/host/xhci-ring.c | 2 drivers/usb/host/xhci.c | 7 drivers/usb/host/xhci.h | 2 drivers/usb/serial/cypress_m8.h | 2 drivers/usb/serial/ftdi_sio.c | 17 drivers/usb/serial/option.c | 15 drivers/usb/serial/pl2303.c | 34 + drivers/usb/storage/unusual_devs.h | 7 drivers/video/console/sticore.c | 2 drivers/xen/pci.c | 2 fs/btrfs/extent-tree.c | 2 fs/btrfs/inode.c | 18 fs/btrfs/ioctl.c | 6 fs/dcache.c | 1 fs/ext4/inline.c | 8 fs/hpfs/alloc.c | 66 +++ fs/hpfs/hpfs_fn.h | 2 fs/hpfs/super.c | 29 + fs/mount.h | 2 include/linux/libata.h | 2 include/linux/mmc/sdhci.h | 2 include/linux/usb/chipidea.h | 1 lib/fonts/Kconfig | 6 mm/mempolicy.c | 2 net/compat.c | 9 net/ipv4/fib_frontend.c | 2 net/ipv4/ip_gre.c | 2 net/ipv4/ip_input.c | 2 net/ipv4/ip_tunnel.c | 1 net/ipv6/ip6_input.c | 2 security/integrity/ima/ima_template_lib.c | 2 sound/core/init.c | 4 sound/pci/Kconfig | 12 sound/pci/hda/hda_generic.c | 6 sound/pci/hda/patch_analog.c | 22 - sound/pci/hda/patch_hdmi.c | 40 +- sound/pci/hda/patch_realtek.c | 51 ++ sound/pci/rme9652/rme9652.c | 2 sound/soc/codecs/adau1701.c | 2 sound/soc/codecs/tlv320aic32x4.c | 4 sound/soc/codecs/wm5110.c | 48 ++ tools/perf/util/session.c | 7 156 files changed, 1701 insertions(+), 625 deletions(-)
Aaro Koskinen (1):
uio: fix devm_request_irq usage
Adrien Vergé (1):
ALSA: hda - Fix silent output on MacBook Air 1,1
Aisheng Dong (1):
mmc: sdhci: fix lockdep error in tuning routine
Alan Stern (1):
USB: fix race between hub_disconnect and recursively_mark_NOTATTACHED
Amir Shehata (1):
staging/lustre/ptlrpc: Fix a crash when dereferencing NULL pointer
Amitkumar Karwar (1):
mwifiex: add missing endian conversion for fw_tsf
Andreas Schwab (1):
KVM: PPC: Book3S HV: use xics_wake_cpu only when defined
Andy Grover (1):
target/iscsi: Fix network portal creation race
Annie Li (1):
xen-netfront: fix resource leak in netfront
Anton Blanchard (1):
drivers/tty: ehv_bytechan fails to build as a module
Aristeu Rozanski (1):
e752x_edac: Fix pci_dev usage count
Asias He (1):
virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freeze
Ben Hutchings (2):
xen/pci: Fix build on non-x86
xhci: Avoid infinite loop when sg urb requires too many trbs
Bing Zhao (1):
mwifiex: fix wrong 11ac bits setting in fw_cap_info
Bjørn Mork (2):
usb: cdc-wdm: avoid hanging on zero length reads
usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
Borislav Petkov (1):
x86, cpu, amd: Add workaround for family 16h, erratum 793
Charles Keepax (1):
ASoC: wm5110: Extend SYSCLK patch file for rev D
Chen-Yu Tsai (1):
pinctrl: sunxi: Honor GPIO output initial vaules
Chris Mason (1):
Btrfs: setup inode location during btrfs_init_inode_locked
Colin Leitner (1):
USB: ftdi_sio: added CS5 quirk for broken smartcard readers
Dan Carpenter (2):
ALSA: bits vs bytes bug in snd_card_create()
SCSI: qla4xxx: overflow in qla4xxx_set_chap_entry()
Dasaratharaman Chandramouli (1):
misc: mic: bug fix for interrupt acknowledgement in MSI/INTx case.
Dave Young (1):
x86/efi: Fix off-by-one bug in EFI Boot Services reservation
David Cohen (2):
mmc: sdhci: add quirk for broken HS200 support
mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
David Rientjes (1):
mm/mempolicy.c: fix mempolicy printing in numa_maps
David Sterba (1):
btrfs: restrict snapshotting to own subvolumes
Dominik Dingel (1):
KVM: s390: ioeventfd: ignore leftmost bits
Dong Aisheng (1):
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
Dongsheng Yang (1):
perf kvm: Fix kvm report without guestmount.
Duan Jiong (2):
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net: gre: use icmp_hdr() to get inner ip header
Eliad Peller (1):
iwlwifi: mvm: fix missing cleanup in .start() error path
Emmanuel Grumbach (1):
iwlwifi: pcie: enable oscillator for L1 exit
Eric W. Biederman (2):
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.
Greg Kroah-Hartman (1):
Linux 3.13.2
Gregory CLEMENT (4):
ARM: mvebu: Add support to get the ID and the revision of a SoC
ARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board
i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs
i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible
Heikki Krogerus (1):
usb: dwc3: fix the glue drivers using the nop phy
Heiko Carstens (3):
s390/compat: fix PSW32_USER_BITS definition
KVM: s390: fix diagnose code extraction
s390/uapi: fix struct statfs64 definition
Helge Deller (2):
parisc/sti_console: prefer Linux fonts over built-in ROM fonts
parisc: fix cache-flushing
Holger Eitzenberger (1):
net: Fix memory leak if TPROXY used with TCP early demux
Hui Wang (3):
ALSA: hda - automute via amp instead of pinctl on some AIO models
ALSA: hda - add headset mic detect quirks for some Dell machines
ALSA: hda - add headset mic detect quirks for another Dell laptop
Jack Pham (1):
usb: xhci: Check for XHCI_PLAT in xhci_cleanup_msix()
Jean-Jacques Hiblot (1):
ARM: at91: smc: bug fix in sam9_smc_cs_read()
Johan Hovold (2):
USB: pl2303: fix data corruption on termios updates
USB: cypress_m8: fix ring-indicator detection and reporting
Jonathan Woithe (1):
serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
Kent Overstreet (1):
bcache: Data corruption fix
Krzysztof Kozlowski (1):
mfd: max77686: Fix regmap resource leak on driver remove
Larry Finger (18):
rtlwifi: rtl8192cu: Add new device ID
rtlwifi: Update beacon statistics for USB driver
rtlwifi: rtl8192c: Prevent reconnect attempts if not connected
rtlwifi: rtl8192cu: Add new firmware
rtlwifi: Redo register save locations
rtlwifi: Set the link state
rtlwifi: rtl8192c: Add new definitions in the dm_common header
rtlwifi: Increase the RX queue length for USB drivers
rtlwifi: rtl8192c: Add routines to save/restore power index registers
rtlwifi: rtl8192cu: Update the power index registers
rtlwifi: rtl8192cu: Fix some code in RF handling
rtlwifi: Add missing code to PWDB statics routine
rtlwifi: rtl8192c: Update dynamic gain calculations
rtlwifi: rtl8188ee: Fix typo in code
b43: Fix lockdep splat
b43: Fix unload oops if firmware is not available
b43legacy: Fix unload oops if firmware is not available
staging: r8712u: Set device type to wlan
Lars-Peter Clausen (1):
ASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constant
Lior Amsalem (1):
ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
Ludovic Desroches (1):
ARM: at91: at91sam9g45: set default mmc pinctrl-names
Malcolm Priestley (2):
staging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning
staging: vt6656: CARDqGetNextTBTT correct uLowNextTBTT
Marcelo Tosatti (1):
KVM: x86: limit PIT timer frequency
Marek Roszko (3):
tty/serial: at91: Handle shutdown more safely tty/serial: at91: fix race condition in atmel_serial_remove tty/serial: at91: disable uart timer at start of shutdown
Mark Deneen (1):
tty/serial: at91: reset rx_ring when port is shutdown
Markus Pargmann (2):
ASoC: codec: tlv320aic32x4: Fix regmap range config
ASoC: tlv320aic32x4: Fix regmap range_min
Mihai Caraman (1):
KVM: PPC: e500: Fix bad address type in deliver_tlb_misss()
Mikhail Zolotaryov (1):
USB: Nokia 502 is an unusual device
Mikulas Patocka (2):
alpha: fix broken network checksum
hpfs: remember free space
Minchan Kim (1):
zram: fix race between reset and flushing pending work
Nicholas Bellinger (1):
iscsi-target: Pre-allocate more tags to avoid ack starvation
Oliver Hartkopp (1):
fib_frontend: fix possible NULL pointer dereference
Or Gerlitz (1):
net/vxlan: Share RX skb de-marking and checksum checks with ovs
PaX Team (1):
x86, x32: Correct invalid use of user timespec in the kernel
Paolo Bonzini (2):
x86, kvm: cache the base of the KVM cpuid leaves
x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101
Paul Mackerras (1):
powerpc: Make sure "cache" directory is removed when offlining cpu
Peter Chen (5):
usb: chipidea: add freescale imx28 special write register method
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: need to mask INT_STATUS when write otgsc
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
usb: ehci: add freescale imx28 special write register method
Peter Huewe (2):
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
Phil Pokorny (1):
hwmon: (k10temp) Add support for Kaveri CPUs
Rahul Bedarkar (1):
USB: serial: add support for iBall 3.5G connect usb modem
Roberto Sassu (1):
ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
Sarah Sharp (1):
xhci: Set scatter-gather limit to avoid failed block writes.
Sebastian Andrzej Siewior (1):
parport: parport_pc: remove double PCI ID for NetMos
Shane Huang (1):
i2c: piix4: Add support for AMD ML and CZ SMBus changes
Simon Guinot (2):
ata: sata_mv: introduce compatible string "marvell, armada-370-sata"
ARM: mvebu: update the SATA compatible string for Armada 370/XP
Srivatsa S. Bhat (1):
powerpc: Fix the setup of CPU-to-Node mappings during CPU online
Stephen Warren (3):
serial: 8250: enable UART_BUG_NOMSR for Tegra
rtc: max8907: weekday encoding fixes
ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled
Sujith Manoharan (2):
ath9k: Use correct channel for RX packets
ath9k: Disable cross-band FCC
Takashi Iwai (6):
ALSA: rme9652: fix a missing comma in channel_map_9636_ds[]
ALSA: hda - Correct AD1986A 3stack pin configs
ALSA: hda - Don't create duplicated ctls for loopback paths
ALSA: Enable CONFIG_ZONE_DMA for smaller PCI DMA masks
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
ALSA: hda - Don't set indep_hp flag for old AD codecs
Tejun Heo (1):
libata: disable LPM for some WD SATA-I devices
Theodore Ts'o (1):
ext4: avoid clearing beyond i_blocks when truncating an inline data file
Thomas Huth (1):
KVM: s390: Always store status during SIGP STOP_AND_STORE_STATUS
Thomas Pugliese (1):
usb: core: get config and string descriptors for unauthorized devices
Tomas Winkler (1):
mei: use hbm idle state to prevent spurious resets
Vijaya Mohan Guvva (1):
SCSI: bfa: Chinook quad port 16G FC HBA claim issue
Wang Shilong (1):
Btrfs: handle EAGAIN case properly in btrfs_drop_snapshot()
Yegor Yefremov (1):
serial: add support for 200 v3 series Titan card
ZHAO Gang (1):
b43: fix the wrong assignment of status.freq in b43_rx()
张君 (1):
usb: option: add new zte 3g modem pids to option driver
Greg KH
maintainerDocumentation/devicetree/bindings/ata/marvell.txt +1 -1
@@ -1,7 +1,7 @@ * Marvell Orion SATA Required Properties: -- compatibility : "marvell,orion-sata" +- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata" - reg : Address range of controller - interrupts : Interrupt controller is using - nr-ports : Number of SATA ports in use.
Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +5 -1
@@ -5,7 +5,11 @@ Required properties : - reg : Offset and length of the register set for the device - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c" - or "marvell,mv78230-i2c" + or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c" + Note: Only use "marvell,mv78230-a0-i2c" for a very rare, + initial version of the SoC which had broken offload + support. Linux auto-detects this and sets it + appropriately. - interrupts : The interrupt number Optional properties :
Documentation/i2c/busses/i2c-piix4 +1 -1
@@ -13,7 +13,7 @@ Supported adapters: * AMD SP5100 (SB700 derivative found on some server mainboards) Datasheet: Publicly available at the AMD website http://support.amd.com/us/Embedded_TechDocs/44413.pdf - * AMD Hudson-2, CZ + * AMD Hudson-2, ML, CZ Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com
Makefile +1 -1
@@ -1,6 +1,6 @@ VERSION = 3 PATCHLEVEL = 13 -SUBLEVEL = 1 +SUBLEVEL = 2 EXTRAVERSION = NAME = One Giant Leap for Frogkind
arch/alpha/lib/csum_partial_copy.c +7 -2
@@ -378,6 +378,11 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,__wsum csum_partial_copy_nocheck (const void *src,void *dst,int len,__wsum sum) { -return csum_partial_copy_from_user ((__force const void __user *)src, - dst, len, sum,NULL ); +__wsum checksum; +mm_segment_t oldfs =get_fs (); +set_fs (KERNEL_DS ); + checksum =csum_partial_copy_from_user ((__force const void __user *)src, + dst, len, sum,NULL ); +set_fs (oldfs); +return checksum; }
arch/arm/boot/dts/armada-370-xp.dtsi +1 -1
@@ -152,7 +152,7 @@ }; sata@a0000 { - compatible = "marvell,orion-sata"; + compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <55>; clocks = <&gateclk 15>, <&gateclk 30>;
arch/arm/boot/dts/at91sam9g45.dtsi +2 -0
@@ -618,6 +618,7 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>;
@@ -629,6 +630,7 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>;
arch/arm/mach-at91/sam9_smc.c +1 -1
@@ -101,7 +101,7 @@ static void sam9_smc_cs_read(void __iomem *base,/* Pulse register */ val =__raw_readl (base +AT91_SMC_PULSE ); - config->nwe_setup = val &AT91_SMC_NWEPULSE ; + config->nwe_pulse = val &AT91_SMC_NWEPULSE ; config->ncs_write_pulse = (val &AT91_SMC_NCS_WRPULSE ) >>8 ; config->nrd_pulse = (val &AT91_SMC_NRDPULSE ) >>16 ; config->ncs_read_pulse = (val &AT91_SMC_NCS_RDPULSE ) >>24 ;
arch/arm/mach-mvebu/Makefile +1 -1
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a -obj-y += system-controller.o +obj-y += system-controller.o mvebu-soc-id.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o
arch/arm/mach-mvebu/armada-370-xp.c +32 -0
@@ -21,6 +21,7 @@#include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/mbus.h> +#include <linux/slab.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h>
@@ -28,6 +29,7 @@#include "armada-370-xp.h" #include "common.h" #include "coherency.h" +#include "mvebu-soc-id.h" static void __init armada_370_xp_map_io (void ) {
@@ -45,8 +47,38 @@ static void __init armada_370_xp_timer_and_clk_init(void)#endif } +static void __init i2c_quirk (void ) +{ +struct device_node *np; +u32 dev, rev; + +/* +* Only revisons more recent than A0 support the offload +* mechanism. We can exit only if we are sure that we can +* get the SoC revision and it is more recent than A0. +*/ +if (mvebu_get_soc_id (&rev, &dev) ==0 && dev >MV78XX0_A0_REV ) +return ; + +for_each_compatible_node (np,NULL ,"marvell,mv78230-i2c" ) { +struct property *new_compat; + + new_compat =kzalloc (sizeof (*new_compat),GFP_KERNEL ); + + new_compat->name =kstrdup ("compatible" ,GFP_KERNEL ); + new_compat->length =sizeof ("marvell,mv78230-a0-i2c" ); + new_compat->value =kstrdup ("marvell,mv78230-a0-i2c" , +GFP_KERNEL ); + +of_update_property (np, new_compat); + } +return ; +} +static void __init armada_370_xp_dt_init (void ) { +if (of_machine_is_compatible ("plathome,openblocks-ax3-4" )) +i2c_quirk ();of_platform_populate (NULL , of_default_bus_match_table,NULL ,NULL ); }
arch/arm/mach-mvebu/mvebu-soc-id.c new file +119 -0
119 lines not on this page · raw message
arch/arm/mach-mvebu/mvebu-soc-id.h new file +32 -0
@@ -0,0 +1,32 @@ +/* +* Marvell EBU SoC ID and revision definitions. +* +* Copyright (C) 2014 Marvell Semiconductor +* +* This file is licensed under the terms of the GNU General Public +* License version 2. This program is licensed "as is" without any +* warranty of any kind, whether express or implied. +*/ + +#ifndef __LINUX_MVEBU_SOC_ID_H +#define __LINUX_MVEBU_SOC_ID_H + +/* Armada XP ID */ +#define MV78230_DEV_ID 0x7823 +#define MV78260_DEV_ID 0x7826 +#define MV78460_DEV_ID 0x7846 + +/* Armada XP Revision */ +#define MV78XX0_A0_REV 0x1 +#define MV78XX0_B0_REV 0x2 + +#ifdef CONFIG_ARCH_MVEBU +int mvebu_get_soc_id (u32 *dev,u32 *rev); +#else +static inline int mvebu_get_soc_id (u32 *dev,u32 *rev) +{ +return -1 ; +} +#endif + +#endif /* __LINUX_MVEBU_SOC_ID_H */
arch/parisc/include/asm/cacheflush.h +0 -2
@@ -132,7 +132,6 @@ void mark_rodata_ro(void);static inline void *kmap (struct page *page) {might_sleep (); -flush_dcache_page (page);return page_address (page); }
@@ -144,7 +143,6 @@ static inline void kunmap(struct page *page)static inline void *kmap_atomic (struct page *page) {pagefault_disable (); -flush_dcache_page (page);return page_address (page); }
arch/parisc/include/asm/page.h +2 -1
@@ -29,7 +29,8 @@ struct page;void clear_page_asm (void *page);void copy_page_asm (void *to,void *from);#define clear_user_page (vto, vaddr, page) clear_page_asm(vto) -#define copy_user_page (vto, vfrom, vaddr, page) copy_page_asm(vto, vfrom) +void copy_user_page (void *vto,void *vfrom,unsigned long vaddr, +struct page *pg);/* #define CONFIG_PARISC_TMPALIAS */
arch/parisc/kernel/cache.c +14 -0
@@ -388,6 +388,20 @@ void flush_kernel_dcache_page_addr(void *addr) }EXPORT_SYMBOL (flush_kernel_dcache_page_addr); +void copy_user_page (void *vto,void *vfrom,unsigned long vaddr, +struct page *pg) +{ +/* Copy using kernel mapping. No coherency is needed (all in +kunmap) for the `to' page. However, the `from' page needs to +be flushed through a mapping equivalent to the user mapping +before it can be accessed through the kernel mapping. */ +preempt_disable (); +flush_dcache_page_asm (__pa (vfrom), vaddr); +preempt_enable (); +copy_page_asm (vto, vfrom); +} +EXPORT_SYMBOL (copy_user_page); +void purge_tlb_entries (struct mm_struct *mm,unsigned long addr) {unsigned long flags;
arch/powerpc/include/asm/topology.h +9 -1
@@ -22,7 +22,15 @@ struct device_node;static inline int cpu_to_node (int cpu) { -return numa_cpu_lookup_table[cpu]; +int nid; + + nid = numa_cpu_lookup_table[cpu]; + +/* +* During early boot, the numa-cpu lookup table might not have been +* setup for all CPUs yet. In such cases, default to node 0. +*/ +return (nid <0 ) ?0 : nid; }#define parent_node (node) (node)
arch/powerpc/kernel/cacheinfo.c +3 -0
@@ -794,6 +794,9 @@ static void remove_cache_dir(struct cache_dir *cache_dir) {remove_index_dirs (cache_dir); +/* Remove cache dir from sysfs */ +kobject_del (cache_dir->kobj); +kobject_put (cache_dir->kobj);kfree (cache_dir);
arch/powerpc/kvm/book3s_hv.c +6 -1
@@ -85,10 +85,13 @@ static void kvmppc_fast_vcpu_kick_hv(struct kvm_vcpu *vcpu)/* CPU points to the first thread of the core */ if (cpu != me && cpu >=0 && cpu < nr_cpu_ids) { +#ifdef CONFIG_KVM_XICS int real_cpu = cpu + vcpu->arch.ptid;if (paca[real_cpu].kvm_hstate.xics_phys)xics_wake_cpu (real_cpu); -else if (cpu_online (cpu)) + else +#endif +if (cpu_online (cpu))smp_send_reschedule (cpu); }put_cpu ();
@@ -1189,7 +1192,9 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu)smp_wmb ();#if defined(CONFIG_PPC_ICP_NATIVE ) && defined(CONFIG_SMP )if (vcpu->arch.ptid) { +#ifdef CONFIG_KVM_XICS xics_wake_cpu (cpu); +#endif ++vc->n_woken; }#endif
arch/powerpc/kvm/e500_mmu.c +1 -1
@@ -127,7 +127,7 @@ static int kvmppc_e500_tlb_index(struct kvmppc_vcpu_e500 *vcpu_e500, }static inline void kvmppc_e500_deliver_tlb_miss (struct kvm_vcpu *vcpu, -unsigned int eaddr,int as) +gva_t eaddr,int as) {struct kvmppc_vcpu_e500 *vcpu_e500 =to_e500 (vcpu);unsigned int victim, tsized;
arch/powerpc/mm/numa.c +67 -3
111 lines not on this page · raw message
arch/s390/include/asm/compat.h +2 -1
@@ -38,7 +38,8 @@#define PSW32_USER_BITS (PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT | \ PSW32_DEFAULT_KEY | PSW32_MASK_BASE | \ - PSW32_MASK_MCHECK | PSW32_MASK_PSTATE | PSW32_ASC_HOME) + PSW32_MASK_MCHECK | PSW32_MASK_PSTATE | \ + PSW32_ASC_PRIMARY)#define COMPAT_USER_HZ 100#define COMPAT_UTS_MACHINE "s390\0\0\0\0"
arch/s390/include/uapi/asm/statfs.h +5 -5
@@ -35,11 +35,11 @@ struct statfs {struct statfs64 {unsigned int f_type;unsigned int f_bsize; -unsigned long f_blocks; -unsigned long f_bfree; -unsigned long f_bavail; -unsigned long f_files; -unsigned long f_ffree; +unsigned long long f_blocks; +unsigned long long f_bfree; +unsigned long long f_bavail; +unsigned long long f_files; +unsigned long long f_ffree;__kernel_fsid_t f_fsid;unsigned int f_namelen;unsigned int f_frsize;
arch/s390/kvm/diag.c +2 -2
@@ -121,7 +121,7 @@ static int __diag_virtio_hypercall(struct kvm_vcpu *vcpu)* - gpr 4 contains the index on the bus (optionally) */ ret =kvm_io_bus_write_cookie (vcpu->kvm,KVM_VIRTIO_CCW_NOTIFY_BUS , - vcpu->run->s.regs.gprs[2 ], + vcpu->run->s.regs.gprs[2 ] &0xffffffff ,8 , &vcpu->run->s.regs.gprs[3 ], vcpu->run->s.regs.gprs[4 ]);
@@ -137,7 +137,7 @@ static int __diag_virtio_hypercall(struct kvm_vcpu *vcpu)int kvm_s390_handle_diag (struct kvm_vcpu *vcpu) { -int code = (vcpu->arch.sie_block->ipb &0xfff0000 ) >>16 ; +int code =kvm_s390_get_base_disp_rs (vcpu) &0xffff ;if (vcpu->arch.sie_block->gpsw.mask &PSW_MASK_PSTATE )return kvm_s390_inject_program_int (vcpu,PGM_PRIVILEGED_OP );
arch/s390/kvm/kvm-s390.c +15 -10
@@ -885,7 +885,7 @@ static int __guestcopy(struct kvm_vcpu *vcpu, u64 guestdest, void *from,* KVM_S390_STORE_STATUS_NOADDR: -> 0x1200 on 64 bit * KVM_S390_STORE_STATUS_PREFIXED: -> prefix */ -int kvm_s390_vcpu_store_status (struct kvm_vcpu *vcpu,unsigned long addr) +int kvm_s390_store_status_unloaded (struct kvm_vcpu *vcpu,unsigned long addr) {unsigned char archmode =1 ;int prefix;
@@ -903,15 +903,6 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr) }else prefix =0 ; -/* -* The guest FPRS and ACRS are in the host FPRS/ACRS due to the lazy -* copying in vcpu load/put. Lets update our copies before we save -* it into the save area -*/ -save_fp_ctl (&vcpu->arch.guest_fpregs.fpc); -save_fp_regs (vcpu->arch.guest_fpregs.fprs); -save_access_regs (vcpu->run->s.regs.acrs); -if (__guestcopy (vcpu, addr + offsetof(struct save_area , fp_regs), vcpu->arch.guest_fpregs.fprs,128 , prefix))return -EFAULT ;
@@ -956,6 +947,20 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)return 0 ; } +int kvm_s390_vcpu_store_status (struct kvm_vcpu *vcpu,unsigned long addr) +{ +/* +* The guest FPRS and ACRS are in the host FPRS/ACRS due to the lazy +* copying in vcpu load/put. Lets update our copies before we save +* it into the save area +*/ +save_fp_ctl (&vcpu->arch.guest_fpregs.fpc); +save_fp_regs (vcpu->arch.guest_fpregs.fprs); +save_access_regs (vcpu->run->s.regs.acrs); + +return kvm_s390_store_status_unloaded (vcpu, addr); +} +static int kvm_vcpu_ioctl_enable_cap (struct kvm_vcpu *vcpu,struct kvm_enable_cap *cap) {
arch/s390/kvm/kvm-s390.h +2 -2
@@ -150,8 +150,8 @@ int kvm_s390_handle_eb(struct kvm_vcpu *vcpu);int kvm_s390_handle_sigp (struct kvm_vcpu *vcpu);/* implemented in kvm-s390.c */ -int kvm_s390_vcpu_store_status (struct kvm_vcpu *vcpu, -unsigned long addr); +int kvm_s390_store_status_unloaded (struct kvm_vcpu *vcpu,unsigned long addr); +int kvm_s390_vcpu_store_status (struct kvm_vcpu *vcpu,unsigned long addr);void s390_vcpu_block (struct kvm_vcpu *vcpu);void s390_vcpu_unblock (struct kvm_vcpu *vcpu);void exit_sie (struct kvm_vcpu *vcpu);
arch/s390/kvm/sigp.c +14 -1
@@ -130,6 +130,7 @@ unlock:static int __inject_sigp_stop (struct kvm_s390_local_interrupt *li,int action) {struct kvm_s390_interrupt_info *inti; +int rc =SIGP_CC_ORDER_CODE_ACCEPTED ; inti =kzalloc (sizeof (*inti),GFP_ATOMIC );if (!inti)
@@ -139,6 +140,8 @@ static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action)spin_lock_bh (&li->lock);if ((atomic_read (li->cpuflags) &CPUSTAT_STOPPED )) {kfree (inti); +if ((action &ACTION_STORE_ON_STOP ) !=0 ) + rc = -ESHUTDOWN ; goto out; }list_add_tail (&inti->list, &li->list);
@@ -150,7 +153,7 @@ static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action) out:spin_unlock_bh (&li->lock); -return SIGP_CC_ORDER_CODE_ACCEPTED ; +return rc; }static int __sigp_stop (struct kvm_vcpu *vcpu,u16 cpu_addr,int action)
@@ -174,6 +177,16 @@ static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int action) unlock:spin_unlock (&fi->lock);VCPU_EVENT (vcpu,4 ,"sent sigp stop to cpu %x" , cpu_addr); + +if ((action &ACTION_STORE_ON_STOP ) !=0 && rc == -ESHUTDOWN ) { +/* If the CPU has already been stopped, we still have +* to save the status when doing stop-and-store. This +* has to be done after unlocking all spinlocks. */ +struct kvm_vcpu *dst_vcpu =kvm_get_vcpu (vcpu->kvm, cpu_addr); + rc =kvm_s390_store_status_unloaded (dst_vcpu, +KVM_S390_STORE_STATUS_NOADDR ); + } +return rc; }
arch/x86/include/asm/kvm_para.h +12 -21
@@ -85,28 +85,9 @@ static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,return ret; } -static inline uint32_t kvm_cpuid_base (void ) -{ -if (boot_cpu_data.cpuid_level <0 ) -return 0 ;/* So we don't blow up on old processors */ - -if (cpu_has_hypervisor) -return hypervisor_cpuid_base ("KVMKVMKVM\0\0\0" ,0 ); - -return 0 ; -} - -static inline bool kvm_para_available (void ) -{ -return kvm_cpuid_base () !=0 ; -} - -static inline unsigned int kvm_arch_para_features (void ) -{ -return cpuid_eax (KVM_CPUID_FEATURES ); -} -#ifdef CONFIG_KVM_GUEST +bool kvm_para_available (void ); +unsigned int kvm_arch_para_features (void );void __init kvm_guest_init (void );void kvm_async_pf_task_wait (u32 token);void kvm_async_pf_task_wake (u32 token);
@@ -126,6 +107,16 @@ static inline void kvm_spinlock_init(void)#define kvm_async_pf_task_wait (T ) do {} while(0)#define kvm_async_pf_task_wake (T ) do {} while(0) +static inline bool kvm_para_available (void ) +{ +return 0 ; +} + +static inline unsigned int kvm_arch_para_features (void ) +{ +return 0 ; +} +static inline u32 kvm_read_and_reset_pf_reason (void ) {return 0 ;
arch/x86/include/uapi/asm/msr-index.h +1 -0
@@ -184,6 +184,7 @@#define MSR_AMD64_PATCH_LOADER 0xc0010020#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140#define MSR_AMD64_OSVW_STATUS 0xc0010141 +#define MSR_AMD64_LS_CFG 0xc0011020#define MSR_AMD64_DC_CFG 0xc0011022#define MSR_AMD64_BU_CFG2 0xc001102a#define MSR_AMD64_IBSFETCHCTL 0xc0011030
arch/x86/kernel/cpu/amd.c +10 -0
@@ -508,6 +508,16 @@ static void early_init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_EXTD_APICID); }#endif + +/* F16h erratum 793, CVE-2013-6885 */ +if (c->x86 ==0x16 && c->x86_model <=0xf ) { +u64 val; + +rdmsrl (MSR_AMD64_LS_CFG , val); +if (!(val &BIT (15 ))) +wrmsrl (MSR_AMD64_LS_CFG , val |BIT (15 )); + } + }static const int amd_erratum_383[];
arch/x86/kernel/kvm.c +32 -0
@@ -500,6 +500,38 @@ void __init kvm_guest_init(void)#endif } +static noinline uint32_t __kvm_cpuid_base(void) +{ +if (boot_cpu_data.cpuid_level <0 ) +return 0 ;/* So we don't blow up on old processors */ + +if (cpu_has_hypervisor) +return hypervisor_cpuid_base ("KVMKVMKVM\0\0\0" ,0 ); + +return 0 ; +} + +static inline uint32_t kvm_cpuid_base (void ) +{ +static int kvm_cpuid_base =-1 ; + +if (kvm_cpuid_base ==-1 ) + kvm_cpuid_base =__kvm_cpuid_base (); + +return kvm_cpuid_base; +} + +bool kvm_para_available (void ) +{ +return kvm_cpuid_base () !=0 ; +} +EXPORT_SYMBOL_GPL (kvm_para_available); + +unsigned int kvm_arch_para_features (void ) +{ +return cpuid_eax (kvm_cpuid_base () |KVM_CPUID_FEATURES ); +} +static uint32_t __init kvm_detect (void ) {return kvm_cpuid_base ();
arch/x86/kvm/i8254.c +18 -0
@@ -37,6 +37,7 @@#include "irq.h" #include "i8254.h" +#include "x86.h" #ifndef CONFIG_X86_64 #define mod_64 (x, y) ((x) - (y) * div64_u64(x, y))
@@ -349,6 +350,23 @@ static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)atomic_set (&ps->pending,0 ); ps->irq_ack =1 ; +/* +* Do not allow the guest to program periodic timers with small +* interval, since the hrtimers are not throttled by the host +* scheduler. +*/ +if (ps->is_periodic) { +s64 min_period = min_timer_period_us *1000LL ; + +if (ps->period < min_period) { +pr_info_ratelimited ( +"kvm: requested %lld ns " +"i8254 timer period limited to %lld ns\n" , + ps->period, min_period); + ps->period = min_period; + } + } +hrtimer_start (&ps->timer,ktime_add_ns (ktime_get (), interval),HRTIMER_MODE_ABS ); }
arch/x86/kvm/lapic.c +0 -3
@@ -71,9 +71,6 @@#define VEC_POS (v) ((v) & (32 - 1))#define REG_POS (v) (((v) >> 5) << 4) -static unsigned int min_timer_period_us =500 ; -module_param (min_timer_period_us, uint,S_IRUGO |S_IWUSR ); -static inline void apic_set_reg (struct kvm_lapic *apic,int reg_off,u32 val) { *((u32 *) (apic->regs + reg_off)) = val;
arch/x86/kvm/x86.c +3 -0
@@ -94,6 +94,9 @@ EXPORT_SYMBOL_GPL(kvm_x86_ops);static bool ignore_msrs =0 ;module_param (ignore_msrs, bool,S_IRUGO |S_IWUSR ); +unsigned int min_timer_period_us =500 ; +module_param (min_timer_period_us, uint,S_IRUGO |S_IWUSR ); +bool kvm_has_tsc_control;EXPORT_SYMBOL_GPL (kvm_has_tsc_control);u32 kvm_max_guest_tsc_khz;
arch/x86/kvm/x86.h +2 -0
@@ -125,5 +125,7 @@ int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,#define KVM_SUPPORTED_XCR0 (XSTATE_FP | XSTATE_SSE | XSTATE_YMM)extern u64 host_xcr0; +extern unsigned int min_timer_period_us; +extern struct static_key kvm_no_apic_vcpu;#endif
arch/x86/platform/efi/efi.c +1 -1
@@ -436,7 +436,7 @@ void __init efi_reserve_boot_services(void)* - Not within any part of the kernel * - Not the bios reserved area */ -if ((start+size >=__pa_symbol (_text) +if ((start + size >__pa_symbol (_text) && start <=__pa_symbol (_end)) || !e820_all_mapped (start, start+size,E820_RAM ) ||memblock_is_region_reserved (start, size)) {
drivers/ata/libata-core.c +27 -0
@@ -2222,6 +2222,16 @@ int ata_dev_configure(struct ata_device *dev)if (rc)return rc; +/* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */ +if ((dev->horkage &ATA_HORKAGE_WD_BROKEN_LPM ) && + (id[ATA_ID_SATA_CAPABILITY ] &0xe ) ==0x2 ) + dev->horkage |=ATA_HORKAGE_NOLPM ; + +if (dev->horkage &ATA_HORKAGE_NOLPM ) { +ata_dev_warn (dev,"LPM support broken, forcing max_power\n" ); + dev->link->ap->target_lpm_policy =ATA_LPM_MAX_POWER ; + } +/* let ACPI work its magic */ rc =ata_acpi_on_devcfg (dev);if (rc)
@@ -4216,6 +4226,23 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + /* + * Some WD SATA-I drives spin up and down erratically when the link + * is put into the slumber mode. We don't have full list of the + * affected devices. Disable LPM if the device matches one of the + * known prefixes and is SATA-1. As a side effect LPM partial is + * lost too. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=57211 + */ + { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + /* End Marker */ { } };
drivers/ata/libata-scsi.c +15 -3
@@ -111,12 +111,14 @@ static const char *ata_lpm_policy_names[] = { [ATA_LPM_MIN_POWER] = "min_power", }; -static ssize_t ata_scsi_lpm_store (struct device *dev, +static ssize_t ata_scsi_lpm_store (struct device *device,struct device_attribute *attr,const char *buf,size_t count) { -struct Scsi_Host *shost =class_to_shost (dev); +struct Scsi_Host *shost =class_to_shost (device);struct ata_port *ap =ata_shost_to_port (shost); +struct ata_link *link; +struct ata_device *dev;enum ata_lpm_policy policy;unsigned long flags;
@@ -132,10 +134,20 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,return -EINVAL ;spin_lock_irqsave (ap->lock, flags); + +ata_for_each_link (link, ap,EDGE ) { +ata_for_each_dev (dev, &ap->link,ENABLED ) { +if (dev->horkage &ATA_HORKAGE_NOLPM ) { + count = -EOPNOTSUPP ; + goto out_unlock; + } + } + } + ap->target_lpm_policy = policy;ata_port_schedule_eh (ap); +out_unlock:spin_unlock_irqrestore (ap->lock, flags); -return count; }
drivers/ata/sata_mv.c +25 -0
@@ -304,6 +304,7 @@ enum {MV5_LTMODE =0x30 ,MV5_PHY_CTL =0x0C ,SATA_IFCFG =0x050 , +LP_PHY_CTL =0x058 , MV_M2_PREAMP_MASK = 0x7e0,
@@ -431,6 +432,7 @@ enum {MV_HP_CUT_THROUGH = (1 <<10 ),/* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 <<11 ),/* SystemOnChip, no PCI */ MV_HP_QUIRK_LED_BLINK_EN = (1 <<12 ),/* is led blinking enabled? */ +MV_HP_FIX_LP_PHY_CTL = (1 <<13 ),/* fix speed in LP_PHY_CTL ? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
@@ -1358,6 +1360,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)if (ofs !=0xffffffffU ) {void __iomem *addr =mv_ap_base (link->ap) + ofs; +struct mv_host_priv *hpriv = link->ap->host->private_data;if (sc_reg_in ==SCR_CONTROL ) {/* * Workaround for 88SX60x1 FEr SATA#26:
@@ -1374,6 +1377,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)*/ if ((val &0xf ) ==1 || (readl (addr) &0xf ) ==1 ) val |=0xf000 ; + +if (hpriv->hp_flags &MV_HP_FIX_LP_PHY_CTL ) { +void __iomem *lp_phy_addr = +mv_ap_base (link->ap) +LP_PHY_CTL ; +/* +* Set PHY speed according to SControl speed. +*/ +if ((val &0xf0 ) ==0x10 ) +writelfl (0x7 , lp_phy_addr); +else +writelfl (0x227 , lp_phy_addr); + } }writelfl (val, addr);return 0 ;
@@ -4110,6 +4125,15 @@ static int mv_platform_probe(struct platform_device *pdev)if (rc) goto err; +/* +* To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be +* updated in the LP_PHY_CTL register. +*/ +if (pdev->dev.of_node && +of_device_is_compatible (pdev->dev.of_node, +"marvell,armada-370-sata" )) + hpriv->hp_flags |=MV_HP_FIX_LP_PHY_CTL ; +/* initialize adapter */ rc =mv_init_host (host);if (rc)
@@ -4209,6 +4233,7 @@ static int mv_platform_resume(struct platform_device *pdev)#ifdef CONFIG_OF static struct of_device_id mv_sata_dt_ids[] = { + { .compatible ="marvell,armada-370-sata" , }, { .compatible ="marvell,orion-sata" , }, {}, };
drivers/char/tpm/tpm_i2c_stm_st33.c +6 -1
@@ -410,6 +410,8 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) &chip->vendor.read_queue) == 0) { burstcnt =get_burstcount (chip); +if (burstcnt <0 ) +return burstcnt; len =min_t (int, burstcnt, count - size);I2C_READ_DATA (client,TPM_DATA_FIFO , buf + size, len); size += len;
@@ -451,7 +453,8 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)static int tpm_stm_i2c_send (struct tpm_chip *chip,unsigned char *buf,size_t len) { -u32 status, burstcnt =0 , i, size; +u32 status, i, size; +int burstcnt =0 ;int ret;u8 data;struct i2c_client *client;
@@ -482,6 +485,8 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,for (i =0 ; i < len -1 ;) { burstcnt =get_burstcount (chip); +if (burstcnt <0 ) +return burstcnt; size =min_t (int, len - i -1 , burstcnt); ret =I2C_WRITE_DATA (client,TPM_DATA_FIFO , buf, size);if (ret <0 )
drivers/char/tpm/tpm_ppi.c +4 -4
@@ -172,7 +172,7 @@ static ssize_t tpm_store_ppi_request(struct device *dev,* is updated with function index from SUBREQ to SUBREQ2 since PPI * version 1.1 */ -if (strcmp (version,"1.1" ) ==-1 ) +if (strcmp (version,"1.1" ) <0 ) params[2 ].integer.value =TPM_PPI_FN_SUBREQ ;else params[2 ].integer.value =TPM_PPI_FN_SUBREQ2 ;
@@ -182,7 +182,7 @@ static ssize_t tpm_store_ppi_request(struct device *dev,* string/package type. For PPI version 1.0 and 1.1, use buffer type * for compatibility, and use package type since 1.2 according to spec. */ -if (strcmp (version,"1.2" ) ==-1 ) { +if (strcmp (version,"1.2" ) <0 ) { params[3 ].type =ACPI_TYPE_BUFFER ; params[3 ].buffer.length =sizeof (req);sscanf (buf,"%d" , &req);
@@ -248,7 +248,7 @@ static ssize_t tpm_show_ppi_transition_action(struct device *dev,* (e.g. Capella with PPI 1.0) need integer/string/buffer type, so for * compatibility, define params[3].type as buffer, if PPI version < 1.2 */ -if (strcmp (version,"1.2" ) ==-1 ) { +if (strcmp (version,"1.2" ) <0 ) { params[3 ].type =ACPI_TYPE_BUFFER ; params[3 ].buffer.length =0 ; params[3 ].buffer.pointer =NULL ;
@@ -390,7 +390,7 @@ static ssize_t show_ppi_operations(char *buf, u32 start, u32 end)kfree (output.pointer); output.length =ACPI_ALLOCATE_BUFFER ; output.pointer =NULL ; -if (strcmp (version,"1.2" ) ==-1 ) +if (strcmp (version,"1.2" ) <0 )return -EPERM ; params[2 ].integer.value =TPM_PPI_FN_GETOPR ;
drivers/edac/e752x_edac.c +3 -1
@@ -1182,9 +1182,11 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx, pvt->bridge_ck =pci_get_device (PCI_VENDOR_ID_INTEL , pvt->dev_info->err_dev, pvt->bridge_ck); -if (pvt->bridge_ck ==NULL ) +if (pvt->bridge_ck ==NULL ) { pvt->bridge_ck =pci_scan_single_device (pdev->bus,PCI_DEVFN (0 ,1 )); +pci_dev_get (pvt->bridge_ck); + }if (pvt->bridge_ck ==NULL ) { e752x_printk(KERN_ERR, "error reporting device not found:"
drivers/hwmon/k10temp.c +1 -0
@@ -210,6 +210,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, {} };
drivers/i2c/busses/Kconfig +1 -0
@@ -152,6 +152,7 @@ config I2C_PIIX4 ATI SB700/SP5100 ATI SB800 AMD Hudson-2 + AMD ML AMD CZ Serverworks OSB4 Serverworks CSB5
drivers/i2c/busses/i2c-mv64xxx.c +5 -0
@@ -692,6 +692,7 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = { { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i}, { .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, { .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, + { .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, {} };MODULE_DEVICE_TABLE (of, mv64xxx_i2c_of_match_table);
@@ -783,6 +784,10 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, drv_data->errata_delay = true; } +if (of_device_is_compatible (np,"marvell,mv78230-a0-i2c" )) { + drv_data->offload_enabled = false; + drv_data->errata_delay = true; + } out:return rc;#endif
drivers/i2c/busses/i2c-piix4.c +23 -5
@@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 - AMD Hudson-2, CZ + AMD Hudson-2, ML, CZ SMSC Victory66 Note: we assume there can only be one device, with one or more
@@ -235,7 +235,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, {unsigned short piix4_smba;unsigned short smba_idx =0xcd6 ; -u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset =0x10 , smb_en; +u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; +u8 i2ccfg, i2ccfg_offset =0x10 ;/* SB800 and later SMBus does not support forcing address */ if (force || force_addr) {
@@ -245,7 +246,15 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, }/* Determine the address of the SMBus areas */ - smb_en = (aux) ?0x28 :0x2c ; +if ((PIIX4_dev->vendor ==PCI_VENDOR_ID_AMD && + PIIX4_dev->device ==PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >=0x41 ) || + (PIIX4_dev->vendor ==PCI_VENDOR_ID_AMD && + PIIX4_dev->device ==0x790b && + PIIX4_dev->revision >=0x49 )) + smb_en =0x00 ; +else + smb_en = (aux) ?0x28 :0x2c ;if (!request_region (smba_idx,2 ,"smba_idx" )) { dev_err(&PIIX4_dev->dev, "SMBus base address index region "
@@ -258,13 +267,22 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, smba_en_hi =inb_p (smba_idx +1 );release_region (smba_idx,2 ); -if ((smba_en_lo &1 ) ==0 ) { +if (!smb_en) { + smb_en_status = smba_en_lo &0x10 ; + piix4_smba = smba_en_hi <<8 ; +if (aux) + piix4_smba |=0x20 ; + }else { + smb_en_status = smba_en_lo &0x01 ; + piix4_smba = ((smba_en_hi <<8 ) | smba_en_lo) &0xffe0 ; + } + +if (!smb_en_status) {dev_err (&PIIX4_dev->dev,"Host SMBus controller not enabled!\n" );return -ENODEV ; } - piix4_smba = ((smba_en_hi <<8 ) | smba_en_lo) &0xffe0 ;if (acpi_check_region (piix4_smba,SMBIOSIZE , piix4_driver.name))return -ENODEV ;
drivers/md/bcache/bset.c +22 -4
@@ -955,7 +955,7 @@ static void sort_key_next(struct btree_iter *iter, *i = iter->data[--iter->used]; } -static void btree_sort_fixup (struct btree_iter *iter) +static struct bkey *btree_sort_fixup (struct btree_iter *iter,struct bkey *tmp) {while (iter->used >1 ) {struct btree_iter_set *top = iter->data, *i = top +1 ;
@@ -983,9 +983,22 @@ static void btree_sort_fixup(struct btree_iter *iter) }else {/* can't happen because of comparison func */ BUG_ON (!bkey_cmp (&START_KEY (top->k), &START_KEY (i->k))); -bch_cut_back (&START_KEY (i->k), top->k); + +if (bkey_cmp (i->k, top->k) <0 ) { +bkey_copy (tmp, top->k); + +bch_cut_back (&START_KEY (i->k), tmp); +bch_cut_front (i->k, top->k); +heap_sift (iter,0 , btree_iter_cmp); + +return tmp; + }else { +bch_cut_back (&START_KEY (i->k), top->k); + } } } + +return NULL ; } static void btree_mergesort(struct btree *b, struct bset *out,
@@ -993,15 +1006,20 @@ static void btree_mergesort(struct btree *b, struct bset *out, bool fixup, bool remove_stale) {struct bkey *k, *last =NULL ; +BKEY_PADDED (k) tmp;bool (*bad)(struct btree *,const struct bkey *) = remove_stale ? bch_ptr_bad : bch_ptr_invalid;while (!btree_iter_end (iter)) {if (fixup && !b->level) -btree_sort_fixup (iter); + k =btree_sort_fixup (iter, &tmp.k); +else + k =NULL ; + +if (!k) + k =bch_btree_iter_next (iter); - k =bch_btree_iter_next (iter);if (bad (b, k))continue ;
drivers/mfd/max77686.c +1 -1
@@ -104,7 +104,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686->irq_gpio = pdata->irq_gpio; max77686->irq = i2c->irq; - max77686->regmap =regmap_init_i2c (i2c, &max77686_regmap_config); + max77686->regmap =devm_regmap_init_i2c (i2c, &max77686_regmap_config);if (IS_ERR (max77686->regmap)) { ret =PTR_ERR (max77686->regmap); dev_err(max77686->dev, "Failed to allocate register map: %d\n",
drivers/misc/mei/hbm.c +19 -0
@@ -128,6 +128,17 @@ static bool is_treat_specially_client(struct mei_cl *cl,return false; } +/** +* mei_hbm_idle - set hbm to idle state +* +* @dev: the device structure +*/ +void mei_hbm_idle (struct mei_device *dev) +{ + dev->init_clients_timer =0 ; + dev->hbm_state =MEI_HBM_IDLE ; +} +int mei_hbm_start_wait (struct mei_device *dev) {int ret;
@@ -577,6 +588,14 @@ void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)mei_read_slots (dev, dev->rd_msg_buf, hdr->length); mei_msg = (struct mei_bus_message *)dev->rd_msg_buf; +/* ignore spurious message and prevent reset nesting +* hbm is put to idle during system reset +*/ +if (dev->hbm_state ==MEI_HBM_IDLE ) { +dev_dbg (&dev->pdev->dev,"hbm: state is idle ignore spurious messages\n" ); +return 0 ; + } +switch (mei_msg->hbm_cmd) {case HOST_START_RES_CMD : version_res = (struct hbm_host_version_response *)mei_msg;
drivers/misc/mei/hbm.h +1 -0
@@ -49,6 +49,7 @@ static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length) hdr->reserved =0 ; } +void mei_hbm_idle (struct mei_device *dev);int mei_hbm_start_req (struct mei_device *dev);int mei_hbm_start_wait (struct mei_device *dev);int mei_hbm_cl_flow_control_req (struct mei_device *dev,struct mei_cl *cl);
drivers/misc/mei/init.c +8 -4
@@ -151,14 +151,19 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)dev_warn (&dev->pdev->dev,"unexpected reset: dev_state = %s\n" ,mei_dev_state_str (dev->dev_state)); +/* we're already in reset, cancel the init timer +* if the reset was called due the hbm protocol error +* we need to call it before hw start +* so the hbm watchdog won't kick in +*/ +mei_hbm_idle (dev); + ret =mei_hw_reset (dev, interrupts_enabled);if (ret) {dev_err (&dev->pdev->dev,"hw reset failed disabling the device\n" ); interrupts_enabled = false; - dev->dev_state =MEI_DEV_DISABLED ; } - dev->hbm_state =MEI_HBM_IDLE ;if (dev->dev_state !=MEI_DEV_INITIALIZING && dev->dev_state !=MEI_DEV_POWER_UP ) {
@@ -182,8 +187,6 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)memset (&dev->wr_ext_msg,0 ,sizeof (dev->wr_ext_msg)); } -/* we're already in reset, cancel the init timer */ - dev->init_clients_timer =0 ; dev->me_clients_num =0 ; dev->rd_msg_hdr =0 ;
@@ -191,6 +194,7 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)if (!interrupts_enabled) {dev_dbg (&dev->pdev->dev,"intr not enabled end of reset\n" ); + dev->dev_state =MEI_DEV_DISABLED ;return ; }
drivers/misc/mei/interrupt.c +15 -10
@@ -533,7 +533,6 @@ EXPORT_SYMBOL_GPL(mei_irq_write_handler);* * @work: pointer to the work_struct structure * -* NOTE: This function is called by timer interrupt work */ void mei_timer (struct work_struct *work) {
@@ -548,18 +547,24 @@ void mei_timer(struct work_struct *work)mutex_lock (&dev->device_lock); -if (dev->dev_state !=MEI_DEV_ENABLED ) { -if (dev->dev_state ==MEI_DEV_INIT_CLIENTS ) { -if (dev->init_clients_timer) { -if (--dev->init_clients_timer ==0 ) { -dev_err (&dev->pdev->dev,"reset: init clients timeout hbm_state = %d.\n" , - dev->hbm_state); -mei_reset (dev,1 ); - } + +/* Catch interrupt stalls during HBM init handshake */ +if (dev->dev_state ==MEI_DEV_INIT_CLIENTS && + dev->hbm_state !=MEI_HBM_IDLE ) { + +if (dev->init_clients_timer) { +if (--dev->init_clients_timer ==0 ) { +dev_err (&dev->pdev->dev,"timer: init clients timeout hbm_state = %d.\n" , + dev->hbm_state); +mei_reset (dev,1 ); + goto out; } } - goto out; } + +if (dev->dev_state !=MEI_DEV_ENABLED ) + goto out; +/*** connect/disconnect timeouts ***/ list_for_each_entry_safe (cl_pos, cl_next, &dev->file_list, link) {if (cl_pos->timer_count) {
drivers/misc/mic/host/mic_device.h +3 -0
@@ -134,6 +134,8 @@ struct mic_device {* @send_intr: Send an interrupt for a particular doorbell on the card. * @ack_interrupt: Hardware specific operations to ack the h/w on * receipt of an interrupt. +* @intr_workarounds: Hardware specific workarounds needed after +* handling an interrupt. * @reset: Reset the remote processor. * @reset_fw_ready: Reset firmware ready field. * @is_fw_ready: Check if firmware is ready for OS download.
@@ -149,6 +151,7 @@ struct mic_hw_ops {void (*write_spad)(struct mic_device *mdev,unsigned int idx,u32 val);void (*send_intr)(struct mic_device *mdev,int doorbell);u32 (*ack_interrupt)(struct mic_device *mdev); +void (*intr_workarounds)(struct mic_device *mdev);void (*reset)(struct mic_device *mdev);void (*reset_fw_ready)(struct mic_device *mdev);bool (*is_fw_ready)(struct mic_device *mdev);
drivers/misc/mic/host/mic_main.c +1 -1
@@ -115,7 +115,7 @@ static irqreturn_t mic_shutdown_db(int irq, void *data)struct mic_device *mdev = data;struct mic_bootparam *bootparam = mdev->dp; - mdev->ops->ack_interrupt (mdev); + mdev->ops->intr_workarounds (mdev);switch (bootparam->shutdown_status) {case MIC_HALTED :
drivers/misc/mic/host/mic_virtio.c +1 -1
@@ -369,7 +369,7 @@ static irqreturn_t mic_virtio_intr_handler(int irq, void *data)struct mic_vdev *mvdev = data;struct mic_device *mdev = mvdev->mdev; - mdev->ops->ack_interrupt (mdev); + mdev->ops->intr_workarounds (mdev);schedule_work (&mvdev->virtio_bh_work);return IRQ_HANDLED ; }
drivers/misc/mic/host/mic_x100.c +20 -16
@@ -174,35 +174,38 @@ static void mic_x100_send_intr(struct mic_device *mdev, int doorbell) }/** -* mic_ack_interrupt - Device specific interrupt handling. -* @mdev: pointer to mic_device instance +* mic_x100_ack_interrupt - Read the interrupt sources register and +* clear it. This function will be called in the MSI/INTx case. +* @mdev: Pointer to mic_device instance. * -* Returns: bitmask of doorbell events triggered. +* Returns: bitmask of interrupt sources triggered. */ static u32 mic_x100_ack_interrupt (struct mic_device *mdev) { -u32 reg =0 ; -struct mic_mw *mw = &mdev->mmio;u32 sicr0 =MIC_X100_SBOX_BASE_ADDRESS +MIC_X100_SBOX_SICR0 ; +u32 reg =mic_mmio_read (&mdev->mmio, sicr0); +mic_mmio_write (&mdev->mmio, reg, sicr0); +return reg; +} + +/** +* mic_x100_intr_workarounds - These hardware specific workarounds are +* to be invoked everytime an interrupt is handled. +* @mdev: Pointer to mic_device instance. +* +* Returns: none +*/ +static void mic_x100_intr_workarounds (struct mic_device *mdev) +{ +struct mic_mw *mw = &mdev->mmio;/* Clear pending bit array. */ if (MIC_A0_STEP == mdev->stepping)mic_mmio_write (mw,1 ,MIC_X100_SBOX_BASE_ADDRESS +MIC_X100_SBOX_MSIXPBACR ); -if (mdev->irq_info.num_vectors <=1 ) { - reg =mic_mmio_read (mw, sicr0); - -if (unlikely (!reg)) - goto done; - -mic_mmio_write (mw, reg, sicr0); - } -if (mdev->stepping >=MIC_B0_STEP ) mdev->intr_ops->enable_interrupts (mdev); -done: -return reg; }/**
@@ -553,6 +556,7 @@ struct mic_hw_ops mic_x100_ops = { .write_spad = mic_x100_write_spad, .send_intr = mic_x100_send_intr, .ack_interrupt = mic_x100_ack_interrupt, + .intr_workarounds = mic_x100_intr_workarounds, .reset = mic_x100_hw_reset, .reset_fw_ready = mic_x100_reset_fw_ready, .is_fw_ready = mic_x100_is_fw_ready,
drivers/mmc/host/sdhci-esdhc-imx.c +5 -7
@@ -558,19 +558,17 @@ static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)struct pltfm_imx_data *imx_data = pltfm_host->priv;struct esdhc_platform_data *boarddata = &imx_data->boarddata; -u32 f_host =clk_get_rate (pltfm_host->clk); - -if (boarddata->f_max && (boarddata->f_max < f_host)) +if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock))return boarddata->f_max;else -return f_host; +return pltfm_host->clock; }static unsigned int esdhc_pltfm_get_min_clock (struct sdhci_host *host) {struct sdhci_pltfm_host *pltfm_host =sdhci_priv (host); -return clk_get_rate (pltfm_host->clk) /256 /16 ; +return pltfm_host->clock /256 /16 ; } static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
@@ -578,7 +576,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, {struct sdhci_pltfm_host *pltfm_host =sdhci_priv (host);struct pltfm_imx_data *imx_data = pltfm_host->priv; -unsigned int host_clock =clk_get_rate (pltfm_host->clk); +unsigned int host_clock = pltfm_host->clock;int pre_div =2 ;int div =1 ;u32 temp, val;
@@ -976,7 +974,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) } pltfm_host->clk = imx_data->clk_per; - + pltfm_host->clock =clk_get_rate (pltfm_host->clk);clk_prepare_enable (imx_data->clk_per);clk_prepare_enable (imx_data->clk_ipg);clk_prepare_enable (imx_data->clk_ahb);
drivers/mmc/host/sdhci-pci.c +1 -0
@@ -381,6 +381,7 @@ static int intel_mrfl_mmc_probe_slot(struct sdhci_pci_slot *slot)static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = { .quirks =SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC , + .quirks2 =SDHCI_QUIRK2_BROKEN_HS200 , .probe_slot = intel_mrfl_mmc_probe_slot, };
drivers/mmc/host/sdhci.c +9 -14
@@ -1845,12 +1845,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)unsigned long timeout;int err =0 ;bool requires_tuning_nonuhs = false; +unsigned long flags; host =mmc_priv (mmc);sdhci_runtime_pm_get (host); -disable_irq (host->irq); -spin_lock (&host->lock); +spin_lock_irqsave (&host->lock, flags); ctrl =sdhci_readw (host,SDHCI_HOST_CONTROL2 );
@@ -1870,15 +1870,13 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) requires_tuning_nonuhs) ctrl |= SDHCI_CTRL_EXEC_TUNING; else { -spin_unlock (&host->lock); -enable_irq (host->irq); +spin_unlock_irqrestore (&host->lock, flags);sdhci_runtime_pm_put (host);return 0 ; }if (host->ops->platform_execute_tuning) { -spin_unlock (&host->lock); -enable_irq (host->irq); +spin_unlock_irqrestore (&host->lock, flags); err = host->ops->platform_execute_tuning (host, opcode);sdhci_runtime_pm_put (host);return err;
@@ -1951,15 +1949,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) host->cmd =NULL ; host->mrq =NULL ; -spin_unlock (&host->lock); -enable_irq (host->irq); - +spin_unlock_irqrestore (&host->lock, flags);/* Wait for Buffer Read Ready interrupt */ wait_event_interruptible_timeout (host->buf_ready_int, (host->tuning_done ==1 ),msecs_to_jiffies (50 )); -disable_irq (host->irq); -spin_lock (&host->lock); +spin_lock_irqsave (&host->lock, flags);if (!host->tuning_done) { pr_info(DRIVER_NAME ": Timeout waiting for "
@@ -2034,8 +2029,7 @@ out: err =0 ;sdhci_clear_set_irqs (host,SDHCI_INT_DATA_AVAIL , ier); -spin_unlock (&host->lock); -enable_irq (host->irq); +spin_unlock_irqrestore (&host->lock, flags);sdhci_runtime_pm_put (host);return err;
@@ -3004,7 +2998,8 @@ int sdhci_add_host(struct sdhci_host *host)/* SD3.0: SDR104 is supported so (for eMMC) the caps2 * field can be promoted to support HS200. */ - mmc->caps2 |=MMC_CAP2_HS200 ; +if (!(host->quirks2 &SDHCI_QUIRK2_BROKEN_HS200 )) + mmc->caps2 |=MMC_CAP2_HS200 ; }else if (caps[1 ] &SDHCI_SUPPORT_SDR50 ) mmc->caps |=MMC_CAP_UHS_SDR50 ;
drivers/net/vxlan.c +9 -11
@@ -1047,6 +1047,15 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)if (!vs) goto drop; +/* If the NIC driver gave us an encapsulated packet +* with the encapsulation mark, the device checksummed it +* for us. Otherwise force the upper layers to verify it. +*/ +if (skb->ip_summed !=CHECKSUM_UNNECESSARY || !skb->encapsulation) + skb->ip_summed =CHECKSUM_NONE ; + + skb->encapsulation =0 ; + vs->rcv (vs, skb, vxh->vx_vni);return 0 ;
@@ -1105,17 +1114,6 @@ static void vxlan_rcv(struct vxlan_sock *vs,skb_reset_network_header (skb); -/* If the NIC driver gave us an encapsulated packet with -* CHECKSUM_UNNECESSARY and Rx checksum feature is enabled, -* leave the CHECKSUM_UNNECESSARY, the device checksummed it -* for us. Otherwise force the upper layers to verify it. -*/ -if (skb->ip_summed !=CHECKSUM_UNNECESSARY || !skb->encapsulation || - !(vxlan->dev->features &NETIF_F_RXCSUM )) - skb->ip_summed =CHECKSUM_NONE ; - - skb->encapsulation =0 ; -if (oip6) err =IP6_ECN_decapsulate (oip6, skb);if (oip)
drivers/net/wireless/ath/ath9k/hw.c +0 -7
@@ -2608,13 +2608,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) pCap->hw_caps |=ATH9K_HW_CAP_PAPRD ; -/* -* Fast channel change across bands is available -* only for AR9462 and AR9565. -*/ -if (AR_SREV_9462 (ah) ||AR_SREV_9565 (ah)) - pCap->hw_caps |=ATH9K_HW_CAP_FCC_BAND_SWITCH ; -return 0 ; }
drivers/net/wireless/ath/ath9k/recv.c +14 -11
@@ -851,20 +851,15 @@ static int ath9k_process_rate(struct ath_common *common,enum ieee80211_band band;unsigned int i =0 ;struct ath_softc __maybe_unused *sc = common->priv; +struct ath_hw *ah = sc->sc_ah; - band = hw->conf.chandef.chan->band; + band = ah->curchan->chan->band; sband = hw->wiphy->bands[band]; -switch (hw->conf.chandef.width) { -case NL80211_CHAN_WIDTH_5 : +if (IS_CHAN_QUARTER_RATE (ah->curchan)) rxs->flag |=RX_FLAG_5MHZ ; -break ; -case NL80211_CHAN_WIDTH_10 : +else if (IS_CHAN_HALF_RATE (ah->curchan)) rxs->flag |=RX_FLAG_10MHZ ; -break ; -default : -break ; - }if (rx_stats->rs_rate &0x80 ) {/* HT rate */
@@ -1248,6 +1243,14 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,ath_start_rx_poll (sc,3 ); } +/* +* This shouldn't happen, but have a safety check anyway. +*/ +if (WARN_ON (!ah->curchan)) { + ret = -EINVAL ; + goto exit; + } +if (ath9k_process_rate (common, hw, rx_stats, rx_status)) { ret =-EINVAL ; goto exit;
@@ -1255,8 +1258,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,ath9k_process_rssi (common, hw, rx_stats, rx_status); - rx_status->band = hw->conf.chandef.chan->band; - rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = ah->curchan->chan->band; + rx_status->freq = ah->curchan->chan->center_freq; rx_status->antenna = rx_stats->rs_antenna; rx_status->flag |=RX_FLAG_MACTIME_END ;
drivers/net/wireless/b43/b43.h +2 -2
@@ -731,8 +731,6 @@ enum b43_firmware_file_type {struct b43_request_fw_context {/* The device we are requesting the fw for. */ struct b43_wldev *dev; -/* a completion event structure needed if this call is asynchronous */ -struct completion fw_load_complete;/* a pointer to the firmware object */ const struct firmware *blob;/* The type of firmware to request. */
@@ -809,6 +807,8 @@ enum {struct b43_wldev {struct b43_bus_dev *dev;struct b43_wl *wl; +/* a completion event structure needed if this call is asynchronous */ +struct completion fw_load_complete;/* The device initialization status. * Use b43_status() to query. */
drivers/net/wireless/b43/main.c +16 -11
@@ -2070,6 +2070,7 @@ void b43_do_release_fw(struct b43_firmware_file *fw)static void b43_release_firmware (struct b43_wldev *dev) { +complete (&dev->fw_load_complete);b43_do_release_fw (&dev->fw.ucode);b43_do_release_fw (&dev->fw.pcm);b43_do_release_fw (&dev->fw.initvals);
@@ -2095,7 +2096,7 @@ static void b43_fw_cb(const struct firmware *firmware, void *context)struct b43_request_fw_context *ctx = context; ctx->blob = firmware; -complete (&ctx->fw_load_complete); +complete (&ctx->dev->fw_load_complete); } int b43_do_request_fw(struct b43_request_fw_context *ctx,
@@ -2142,7 +2143,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx, }if (async) {/* do this part asynchronously */ -init_completion (&ctx->fw_load_complete); +init_completion (&ctx->dev->fw_load_complete); err =request_firmware_nowait (THIS_MODULE ,1 , ctx->fwname, ctx->dev->dev->dev,GFP_KERNEL , ctx, b43_fw_cb);
@@ -2150,12 +2151,11 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,pr_err ("Unable to load firmware\n" );return err; } -/* stall here until fw ready */ -wait_for_completion (&ctx->fw_load_complete); +wait_for_completion (&ctx->dev->fw_load_complete);if (ctx->blob) goto fw_ready;/* On some ARM systems, the async request will fail, but the next sync -* request works. For this reason, we dall through here +* request works. For this reason, we fall through here */ } err = request_firmware(&ctx->blob, ctx->fwname,
@@ -2424,6 +2424,7 @@ error:static int b43_one_core_attach (struct b43_bus_dev *dev,struct b43_wl *wl);static void b43_one_core_detach (struct b43_bus_dev *dev); +static int b43_rng_init (struct b43_wl *wl);static void b43_request_firmware (struct work_struct *work) {
@@ -2475,6 +2476,10 @@ start_ieee80211: goto err_one_core_detach; wl->hw_registred = true;b43_leds_register (wl->current_dev); + +/* Register HW RNG driver */ +b43_rng_init (wl); + goto out; err_one_core_detach:
@@ -4636,9 +4641,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)if (!dev ||b43_status (dev) !=B43_STAT_INITIALIZED )return ; -/* Unregister HW RNG driver */ -b43_rng_exit (dev->wl); -b43_set_status (dev,B43_STAT_UNINIT );/* Stop the microcode PSM. */
@@ -4795,9 +4797,6 @@ static int b43_wireless_core_init(struct b43_wldev *dev)b43_set_status (dev,B43_STAT_INITIALIZED ); -/* Register HW RNG driver */ -b43_rng_init (dev->wl); - out:return err;
@@ -5464,6 +5463,9 @@ static void b43_bcma_remove(struct bcma_device *core)b43_one_core_detach (wldev->dev); +/* Unregister HW RNG driver */ +b43_rng_exit (wl); +b43_leds_unregister (wl);ieee80211_free_hw (wl->hw);
@@ -5541,6 +5543,9 @@ static void b43_ssb_remove(struct ssb_device *sdev)b43_one_core_detach (dev); +/* Unregister HW RNG driver */ +b43_rng_exit (wl); +if (list_empty (&wl->devlist)) {b43_leds_unregister (wl);/* Last core on the chip unregistered.
drivers/net/wireless/b43/xmit.c +2 -2
@@ -821,10 +821,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)* channel number in b43. */ if (chanstat &B43_RX_CHAN_5GHZ ) { status.band =IEEE80211_BAND_5GHZ ; - status.freq =b43_freq_to_channel_5ghz (chanid); + status.freq =b43_channel_to_freq_5ghz (chanid); }else { status.band =IEEE80211_BAND_2GHZ ; - status.freq =b43_freq_to_channel_2ghz (chanid); + status.freq =b43_channel_to_freq_2ghz (chanid); }break ;default :
drivers/net/wireless/b43legacy/main.c +1 -0
@@ -3919,6 +3919,7 @@ static void b43legacy_remove(struct ssb_device *dev)* as the ieee80211 unreg will destroy the workqueue. */ cancel_work_sync (&wldev->restart_work);cancel_work_sync (&wl->firmware_load); +complete (&wldev->fw_load_complete);B43legacy_WARN_ON (!wl);if (!wldev->fw.ucode)
drivers/net/wireless/iwlwifi/iwl-prph.h +4 -0
@@ -274,4 +274,8 @@ static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)/*********************** END TX SCHEDULER *************************************/ +/* Oscillator clock */ +#define OSC_CLK (0xa04068) +#define OSC_CLK_FORCE_CONTROL (0x8) +#endif /* __iwl_prph_h__ */
drivers/net/wireless/iwlwifi/mvm/ops.c +1 -0
@@ -470,6 +470,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, out_unregister:ieee80211_unregister_hw (mvm->hw); +iwl_mvm_leds_exit (mvm); out_free:iwl_phy_db_free (mvm->phy_db);kfree (mvm->scan_cmd);
drivers/net/wireless/iwlwifi/pcie/trans.c +22 -0
@@ -206,6 +206,28 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans) goto out; } +if (trans->cfg->host_interrupt_operation_mode) { +/* +* This is a bit of an abuse - This is needed for 7260 / 3160 +* only check host_interrupt_operation_mode even if this is +* not related to host_interrupt_operation_mode. +* +* Enable the oscillator to count wake up time for L1 exit. This +* consumes slightly more power (100uA) - but allows to be sure +* that we wake up from L1 on time. +* +* This looks weird: read twice the same register, discard the +* value, set a bit, and yet again, read that same register +* just to discard the value. But that's the way the hardware +* seems to like it. +*/ +iwl_read_prph (trans,OSC_CLK ); +iwl_read_prph (trans,OSC_CLK ); +iwl_set_bits_prph (trans,OSC_CLK ,OSC_CLK_FORCE_CONTROL ); +iwl_read_prph (trans,OSC_CLK ); +iwl_read_prph (trans,OSC_CLK ); + } +/* * Enable DMA clock and wait for it to stabilize. *
drivers/net/wireless/mwifiex/fw.h +1 -1
@@ -226,7 +226,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {/* HW_SPEC fw_cap_info */ -#define ISSUPP_11ACENABLED (fw_cap_info) (fw_cap_info & (BIT(13)|BIT(14))) +#define ISSUPP_11ACENABLED (fw_cap_info) (fw_cap_info & (BIT(12)|BIT(13)))#define GET_VHTCAP_CHWDSET (vht_cap_info) ((vht_cap_info >> 2) & 0x3)#define GET_VHTNSSMCS (mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
drivers/net/wireless/mwifiex/scan.c +2 -2
@@ -1681,7 +1681,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,const u8 *ie_buf;size_t ie_len;u16 channel =0 ; -u64 fw_tsf =0 ; +__le64 fw_tsf =0 ;u16 beacon_size =0 ;u32 curr_bcn_bytes;u32 freq;
@@ -1815,7 +1815,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, ie_buf, ie_len, rssi, GFP_KERNEL); bss_priv = (struct mwifiex_bss_priv *)bss->priv; bss_priv->band = band; - bss_priv->fw_tsf = fw_tsf; + bss_priv->fw_tsf =le64_to_cpu (fw_tsf);if (priv->media_connected && !memcmp(bssid, priv->curr_bss_params.bss_descriptor
drivers/net/wireless/rtlwifi/base.c +2 -1
@@ -1437,7 +1437,8 @@ void rtl_watchdog_wq_callback(void *data)/* if we can't recv beacon for 6s, we should * reconnect this AP */ -if (rtlpriv->link_info.roam_times >=3 ) { +if ((rtlpriv->link_info.roam_times >=3 ) && + !is_zero_ether_addr (rtlpriv->mac80211.bssid)) {RT_TRACE (rtlpriv,COMP_ERR ,DBG_EMERG ,"AP off, try to reconnect now\n" ); rtlpriv->link_info.roam_times =0 ;
drivers/net/wireless/rtlwifi/core.c +11 -0
@@ -46,10 +46,20 @@ void rtl_fw_cb(const struct firmware *firmware, void *context) "Firmware callback routine entered!\n");complete (&rtlpriv->firmware_loading_complete);if (!firmware) { +if (rtlpriv->cfg->alt_fw_name) { + err =request_firmware (&firmware, + rtlpriv->cfg->alt_fw_name, + rtlpriv->io.dev); +pr_info ("Loading alternative firmware %s\n" , + rtlpriv->cfg->alt_fw_name); +if (!err) + goto found_alt; + }pr_err ("Firmware %s not available\n" , rtlpriv->cfg->fw_name); rtlpriv->max_fw_size =0 ;return ; } +found_alt:if (firmware->size > rtlpriv->max_fw_size) {RT_TRACE (rtlpriv,COMP_ERR ,DBG_EMERG ,"Firmware is too big!\n" );
@@ -184,6 +194,7 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, rtlpriv->cfg->maps [RTL_IBSS_INT_MASKS]); } + mac->link_state =MAC80211_LINKED ;break ;case NL80211_IFTYPE_ADHOC : RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c +1 -1
@@ -1078,7 +1078,7 @@ static void rtl88e_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw rtldm->swing_flag_ofdm = true; } -if (rtldm->swing_idx_cck != rtldm->swing_idx_cck) { +if (rtldm->swing_idx_cck_cur != rtldm->swing_idx_cck) { rtldm->swing_idx_cck_cur = rtldm->swing_idx_cck; rtldm->swing_flag_cck = true; }
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +229 -98
521 lines not on this page · raw message
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h +14 -0
@@ -91,6 +91,17 @@#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67 +#define DYNAMIC_FUNC_DISABLE 0x0 +#define DYNAMIC_FUNC_DIG BIT(0) +#define DYNAMIC_FUNC_HP BIT(1) +#define DYNAMIC_FUNC_SS BIT(2)/*Tx Power Tracking*/ +#define DYNAMIC_FUNC_BT BIT(3) +#define DYNAMIC_FUNC_ANT_DIV BIT(4) + +#define RSSI_CCK 0 +#define RSSI_OFDM 1 +#define RSSI_DEFAULT 2 +struct swat_t {u8 failure_cnt;u8 try_flag;
@@ -167,5 +178,8 @@ void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);void rtl92c_phy_iq_calibrate (struct ieee80211_hw *hw,bool recovery);void rtl92c_dm_dynamic_txpower (struct ieee80211_hw *hw);void rtl92c_dm_bt_coexist (struct ieee80211_hw *hw); +void dm_savepowerindex (struct ieee80211_hw *hw); +void dm_writepowerindex (struct ieee80211_hw *hw,u8 value); +void dm_restorepowerindex (struct ieee80211_hw *hw);#endif
drivers/net/wireless/rtlwifi/rtl8192cu/dm.c +9 -0
@@ -101,6 +101,15 @@ void rtl92cu_dm_dynamic_txpower(struct ieee80211_hw *hw)"PHY_SetTxPowerLevel8192S() Channel = %d\n" , rtlphy->current_channel);rtl92c_phy_set_txpower_level (hw, rtlphy->current_channel); +if (rtlpriv->dm.dynamic_txhighpower_lvl == +TXHIGHPWRLEVEL_NORMAL ) +dm_restorepowerindex (hw); +else if (rtlpriv->dm.dynamic_txhighpower_lvl == +TXHIGHPWRLEVEL_LEVEL1 ) +dm_writepowerindex (hw,0x14 ); +else if (rtlpriv->dm.dynamic_txhighpower_lvl == +TXHIGHPWRLEVEL_LEVEL2 ) +dm_writepowerindex (hw,0x10 ); } rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
drivers/net/wireless/rtlwifi/rtl8192cu/dm.h +3 -0
@@ -30,3 +30,6 @@#include "../rtl8192ce/dm.h" void rtl92cu_dm_dynamic_txpower (struct ieee80211_hw *hw); +void dm_savepowerindex (struct ieee80211_hw *hw); +void dm_writepowerindex (struct ieee80211_hw *hw,u8 value); +void dm_restorepowerindex (struct ieee80211_hw *hw);
drivers/net/wireless/rtlwifi/rtl8192cu/rf.c +16 -13
@@ -85,17 +85,15 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,if (mac->act_scanning) { tx_agc[RF90_PATH_A ] =0x3f3f3f3f ; tx_agc[RF90_PATH_B ] =0x3f3f3f3f ; -if (turbo_scanoff) { -for (idx1 =RF90_PATH_A ; idx1 <=RF90_PATH_B ; idx1++) { - tx_agc[idx1] = ppowerlevel[idx1] | - (ppowerlevel[idx1] <<8 ) | - (ppowerlevel[idx1] <<16 ) | - (ppowerlevel[idx1] <<24 ); -if (rtlhal->interface ==INTF_USB ) { -if (tx_agc[idx1] >0x20 && - rtlefuse->external_pa) - tx_agc[idx1] =0x20 ; - } +for (idx1 =RF90_PATH_A ; idx1 <=RF90_PATH_B ; idx1++) { + tx_agc[idx1] = ppowerlevel[idx1] | + (ppowerlevel[idx1] <<8 ) | + (ppowerlevel[idx1] <<16 ) | + (ppowerlevel[idx1] <<24 ); +if (rtlhal->interface ==INTF_USB ) { +if (tx_agc[idx1] >0x20 && + rtlefuse->external_pa) + tx_agc[idx1] =0x20 ; } } }else {
@@ -107,7 +105,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw, TXHIGHPWRLEVEL_LEVEL2) { tx_agc[RF90_PATH_A ] =0x00000000 ; tx_agc[RF90_PATH_B ] =0x00000000 ; - } else{ + } else {for (idx1 =RF90_PATH_A ; idx1 <=RF90_PATH_B ; idx1++) { tx_agc[idx1] = ppowerlevel[idx1] | (ppowerlevel[idx1] << 8) |
@@ -373,7 +371,12 @@ static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw, regoffset == RTXAGC_B_MCS07_MCS04) regoffset =0xc98 ;for (i =0 ; i <3 ; i++) { - writeVal = (writeVal >6 ) ? (writeVal -6 ) :0 ; +if (i !=2 ) + writeVal = (writeVal >8 ) ? + (writeVal -8 ) :0 ; +else + writeVal = (writeVal >6 ) ? + (writeVal -6 ) :0 ;rtl_write_byte (rtlpriv, (u32)(regoffset + i), (u8 )writeVal); }
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +14 -3
@@ -50,6 +50,9 @@ MODULE_AUTHOR("Larry Finger <[email protected]>");MODULE_LICENSE ("GPL" );MODULE_DESCRIPTION ("Realtek 8192C/8188C 802.11n USB wireless" );MODULE_FIRMWARE ("rtlwifi/rtl8192cufw.bin" ); +MODULE_FIRMWARE ("rtlwifi/rtl8192cufw_A.bin" ); +MODULE_FIRMWARE ("rtlwifi/rtl8192cufw_B.bin" ); +MODULE_FIRMWARE ("rtlwifi/rtl8192cufw_TMSC.bin" );static int rtl92cu_init_sw_vars (struct ieee80211_hw *hw) {
@@ -69,14 +72,21 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) "Can't alloc buffer for fw\n");return 1 ; } - +if (IS_VENDOR_UMC_A_CUT (rtlpriv->rtlhal.version) && + !IS_92C_SERIAL (rtlpriv->rtlhal.version)) { + rtlpriv->cfg->fw_name ="rtlwifi/rtl8192cufw_A.bin" ; + }else if (IS_81xxC_VENDOR_UMC_B_CUT (rtlpriv->rtlhal.version)) { + rtlpriv->cfg->fw_name ="rtlwifi/rtl8192cufw_B.bin" ; + }else { + rtlpriv->cfg->fw_name ="rtlwifi/rtl8192cufw_TMSC.bin" ; + } +/* provide name of alternative file */ + rtlpriv->cfg->alt_fw_name ="rtlwifi/rtl8192cufw.bin" ;pr_info ("Loading firmware %s\n" , rtlpriv->cfg->fw_name); rtlpriv->max_fw_size =0x4000 ; err =request_firmware_nowait (THIS_MODULE ,1 , rtlpriv->cfg->fw_name, rtlpriv->io.dev,GFP_KERNEL , hw, rtl_fw_cb); - -return err; }
@@ -307,6 +317,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/ {RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/ {RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/ + {RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/ {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*//* HP - Lite-On ,8188CUS Slim Combo */
drivers/net/wireless/rtlwifi/stats.c +14 -0
@@ -176,6 +176,7 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)struct rtl_sta_info *drv_priv =NULL ;struct ieee80211_sta *sta =NULL ;long undec_sm_pwdb; +long undec_sm_cck;rcu_read_lock ();if (rtlpriv->mac80211.opmode !=NL80211_IFTYPE_STATION )
@@ -185,12 +186,16 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)if (sta) { drv_priv = (struct rtl_sta_info *) sta->drv_priv; undec_sm_pwdb = drv_priv->rssi_stat.undec_sm_pwdb; + undec_sm_cck = drv_priv->rssi_stat.undec_sm_cck; }else { undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb; + undec_sm_cck = rtlpriv->dm.undec_sm_cck; }if (undec_sm_pwdb <0 ) undec_sm_pwdb = pstatus->rx_pwdb_all; +if (undec_sm_cck <0 ) + undec_sm_cck = pstatus->rx_pwdb_all;if (pstatus->rx_pwdb_all > (u32 ) undec_sm_pwdb) { undec_sm_pwdb = (((undec_sm_pwdb) * (RX_SMOOTH_FACTOR - 1)) +
@@ -200,6 +205,15 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus) undec_sm_pwdb = (((undec_sm_pwdb) * (RX_SMOOTH_FACTOR -1 )) + (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR ); } +if (pstatus->rx_pwdb_all > (u32 ) undec_sm_cck) { + undec_sm_cck = (((undec_sm_pwdb) * + (RX_SMOOTH_FACTOR -1 )) + + (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR ); + undec_sm_cck = undec_sm_cck +1 ; + }else { + undec_sm_pwdb = (((undec_sm_cck) * (RX_SMOOTH_FACTOR -1 )) + + (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR ); + }if (sta) { drv_priv->rssi_stat.undec_sm_pwdb = undec_sm_pwdb;
drivers/net/wireless/rtlwifi/usb.c +3 -1
@@ -483,6 +483,8 @@ static void _rtl_usb_rx_process_agg(struct ieee80211_hw *hw,if (unicast) rtlpriv->link_info.num_rx_inperiod++; } +/* static bcn for roaming */ +rtl_beacon_statistic (hw, skb); } }
@@ -553,7 +555,7 @@ static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb) } } -#define __RX_SKB_MAX_QUEUED 32 +#define __RX_SKB_MAX_QUEUED 64static void _rtl_rx_work (unsigned long param) {
drivers/net/wireless/rtlwifi/wifi.h +17 -16
@@ -1033,6 +1033,7 @@ struct rtl_ht_agg {struct rssi_sta {long undec_sm_pwdb; +long undec_sm_cck; };struct rtl_tid_data {
@@ -1323,8 +1324,10 @@ struct fast_ant_training {struct rtl_dm {/*PHY status for Dynamic Management */ long entry_min_undec_sm_pwdb; +long undec_sm_cck;long undec_sm_pwdb;/*out dm */ long entry_max_undec_sm_pwdb; +s32 ofdm_pkt_cnt;bool dm_initialgain_enable;bool dynamic_txpower_enable;bool current_turbo_edca;
@@ -1339,6 +1342,7 @@ struct rtl_dm {bool inform_fw_driverctrldm;bool current_mrc_switch;u8 txpowercount; +u8 powerindex_backup[6 ];u8 thermalvalue_rxgain;u8 thermalvalue_iqk;
@@ -1350,7 +1354,9 @@ struct rtl_dm {bool done_txpower;u8 dynamic_txhighpower_lvl;/*Tx high power level */ u8 dm_flag;/*Indicate each dynamic mechanism's status. */ +u8 dm_flag_tmp;u8 dm_type; +u8 dm_rssi_sel;u8 txpower_track_control;bool interrupt_migration;bool disable_tx_int;
@@ -1804,6 +1810,7 @@ struct rtl_hal_cfg {bool write_readback;char *name;char *fw_name; +char *alt_fw_name;struct rtl_hal_ops *ops;struct rtl_mod_params *mod_params;struct rtl_hal_usbint_cfg *usb_interface_cfg;
@@ -1948,6 +1955,7 @@ struct dig_t {u8 pre_ccastate;u8 cur_ccasate;u8 large_fa_hit; +u8 dig_dynamic_min;u8 forbidden_igi;u8 dig_state;u8 dig_highpwrstate;
@@ -2028,22 +2036,15 @@ struct rtl_priv {struct dig_t dm_digtable;struct ps_t dm_pstable; -/* section shared by individual drivers */ -union { -struct {/* data buffer pointer for USB reads */ -__le32 *usb_data; -int usb_data_index; -bool initialized; - }; -struct {/* section for 8723ae */ -bool reg_init;/* true if regs saved */ -u32 reg_874; -u32 reg_c70; -u32 reg_85c; -u32 reg_a74; -bool bt_operation_on; - }; - }; +u32 reg_874; +u32 reg_c70; +u32 reg_85c; +u32 reg_a74; +bool reg_init;/* true if regs saved */ +bool bt_operation_on; +__le32 *usb_data; +int usb_data_index; +bool initialized;bool enter_ps;/* true when entering PS */ u8 rate_mask[5 ];
drivers/net/xen-netfront.c +26 -62
150 lines not on this page · raw message
drivers/parport/parport_pc.c +2 -8
@@ -2600,8 +2600,6 @@ enum parport_pc_pci_cards { syba_2p_epp, syba_1p_ecp, titan_010l, - titan_1284p1, - titan_1284p2, avlab_1p, avlab_2p, oxsemi_952,
@@ -2660,8 +2658,6 @@ static struct parport_pc_pci { /* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } }, /* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } }, /* titan_010l */ { 1, { { 3, -1 }, } }, - /* titan_1284p1 */ { 1, { { 0, 1 }, } }, - /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } }, /* avlab_1p */ { 1, { { 0, 1}, } }, /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} }, /* The Oxford Semi cards are unusual: 954 doesn't support ECP,
@@ -2677,8 +2673,8 @@ static struct parport_pc_pci { /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, - /* netmos_9805 */ { 1, { { 0, -1 }, } }, - /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, + /* netmos_9805 */ { 1, { { 0, 1 }, } }, + /* netmos_9815 */ { 2, { { 0, 1 }, { 2, 3 }, } }, /* netmos_9901 */ { 1, { { 0, -1 }, } }, /* netmos_9865 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
@@ -2722,8 +2718,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L, PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l }, - { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 }, - { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ /* AFAVLAB_TK9902 */ { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
drivers/pinctrl/pinctrl-sunxi.c +7 -6
@@ -469,12 +469,6 @@ static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset)return val; } -static int sunxi_pinctrl_gpio_direction_output (struct gpio_chip *chip, -unsigned offset,int value) -{ -return pinctrl_gpio_direction_output (chip->base + offset); -} -static void sunxi_pinctrl_gpio_set (struct gpio_chip *chip,unsigned offset,int value) {
@@ -498,6 +492,13 @@ static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,spin_unlock_irqrestore (&pctl->lock, flags); } +static int sunxi_pinctrl_gpio_direction_output (struct gpio_chip *chip, +unsigned offset,int value) +{ +sunxi_pinctrl_gpio_set (chip, offset, value); +return pinctrl_gpio_direction_output (chip->base + offset); +} +static int sunxi_pinctrl_gpio_of_xlate (struct gpio_chip *gc,const struct of_phandle_args *gpiospec,u32 *flags)
drivers/platform/x86/hp_accel.c +1 -0
@@ -77,6 +77,7 @@ static inline void delayed_sysfs_set(struct led_classdev *led_cdev,static struct acpi_device_id lis3lv02d_device_ids[] = { {"HPQ0004" ,0 },/* HP Mobile Data Protection System PNP */ {"HPQ6000" ,0 },/* HP Mobile Data Protection System PNP */ + {"HPQ6007" ,0 },/* HP Mobile Data Protection System PNP */ {"" ,0 }, };MODULE_DEVICE_TABLE (acpi, lis3lv02d_device_ids);
drivers/rtc/rtc-max8907.c +5 -6
@@ -51,7 +51,7 @@ static irqreturn_t max8907_irq_handler(int irq, void *data) {struct max8907_rtc *rtc = data; -regmap_update_bits (rtc->regmap,MAX8907_REG_ALARM0_CNTL ,0x7f ,0 ); +regmap_write (rtc->regmap,MAX8907_REG_ALARM0_CNTL ,0 );rtc_update_irq (rtc->rtc_dev,1 ,RTC_IRQF |RTC_AF );
@@ -64,7 +64,7 @@ static void regs_to_tm(u8 *regs, struct rtc_time *tm)bcd2bin (regs[RTC_YEAR1 ]) -1900 ; tm->tm_mon =bcd2bin (regs[RTC_MONTH ] &0x1f ) -1 ; tm->tm_mday =bcd2bin (regs[RTC_DATE ] &0x3f ); - tm->tm_wday = (regs[RTC_WEEKDAY ] &0x07 ) -1 ; + tm->tm_wday = (regs[RTC_WEEKDAY ] &0x07 );if (regs[RTC_HOUR ] &HOUR_12 ) { tm->tm_hour =bcd2bin (regs[RTC_HOUR ] &0x01f );if (tm->tm_hour ==12 )
@@ -88,7 +88,7 @@ static void tm_to_regs(struct rtc_time *tm, u8 *regs) regs[RTC_YEAR1 ] =bin2bcd (low); regs[RTC_MONTH ] =bin2bcd (tm->tm_mon +1 ); regs[RTC_DATE ] =bin2bcd (tm->tm_mday); - regs[RTC_WEEKDAY ] = tm->tm_wday +1 ; + regs[RTC_WEEKDAY ] = tm->tm_wday; regs[RTC_HOUR ] =bin2bcd (tm->tm_hour); regs[RTC_MIN ] =bin2bcd (tm->tm_min); regs[RTC_SEC ] =bin2bcd (tm->tm_sec);
@@ -153,7 +153,7 @@ static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)tm_to_regs (&alrm->time, regs);/* Disable alarm while we update the target time */ - ret =regmap_update_bits (rtc->regmap,MAX8907_REG_ALARM0_CNTL ,0x7f ,0 ); + ret =regmap_write (rtc->regmap,MAX8907_REG_ALARM0_CNTL ,0 );if (ret <0 )return ret;
@@ -163,8 +163,7 @@ static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)return ret;if (alrm->enabled) - ret =regmap_update_bits (rtc->regmap,MAX8907_REG_ALARM0_CNTL , -0x7f ,0x7f ); + ret =regmap_write (rtc->regmap,MAX8907_REG_ALARM0_CNTL ,0x77 );return ret; }
drivers/scsi/bfa/bfad.c +4 -2
@@ -1802,7 +1802,7 @@ out:static u32 *bfad_load_fwimg (struct pci_dev *pdev) { -if (pdev->device ==BFA_PCI_DEVICE_ID_CT2 ) { +if (bfa_asic_id_ct2 (pdev->device)) {if (bfi_image_ct2_size ==0 )bfad_read_firmware (pdev, &bfi_image_ct2, &bfi_image_ct2_size,BFAD_FW_FILE_CT2 );
@@ -1812,12 +1812,14 @@ bfad_load_fwimg(struct pci_dev *pdev)bfad_read_firmware (pdev, &bfi_image_ct, &bfi_image_ct_size,BFAD_FW_FILE_CT );return bfi_image_ct; - }else { + }else if (bfa_asic_id_cb (pdev->device)) {if (bfi_image_cb_size ==0 )bfad_read_firmware (pdev, &bfi_image_cb, &bfi_image_cb_size,BFAD_FW_FILE_CB );return bfi_image_cb; } + +return NULL ; } static void
drivers/scsi/qla4xxx/ql4_os.c +7 -4
@@ -802,6 +802,7 @@ static int qla4xxx_set_chap_entry(struct Scsi_Host *shost, void *data, int len)int type;int rem = len;int rc =0 ; +int size;memset (&chap_rec,0 ,sizeof (chap_rec));
@@ -816,12 +817,14 @@ static int qla4xxx_set_chap_entry(struct Scsi_Host *shost, void *data, int len) chap_rec.chap_type = param_info->value[0 ];break ;case ISCSI_CHAP_PARAM_USERNAME : -memcpy (chap_rec.username, param_info->value, - param_info->len); + size =min_t (size_t,sizeof (chap_rec.username), + param_info->len); +memcpy (chap_rec.username, param_info->value, size);break ;case ISCSI_CHAP_PARAM_PASSWORD : -memcpy (chap_rec.password, param_info->value, - param_info->len); + size =min_t (size_t,sizeof (chap_rec.password), + param_info->len); +memcpy (chap_rec.password, param_info->value, size);break ;case ISCSI_CHAP_PARAM_PASSWORD_LEN : chap_rec.password_length = param_info->value[0 ];
drivers/scsi/virtio_scsi.c +14 -1
@@ -956,6 +956,10 @@ static void virtscsi_remove(struct virtio_device *vdev)#ifdef CONFIG_PM_SLEEP static int virtscsi_freeze (struct virtio_device *vdev) { +struct Scsi_Host *sh =virtio_scsi_host (vdev); +struct virtio_scsi *vscsi =shost_priv (sh); + +unregister_hotcpu_notifier (&vscsi->nb);virtscsi_remove_vqs (vdev);return 0 ; }
@@ -964,8 +968,17 @@ static int virtscsi_restore(struct virtio_device *vdev) {struct Scsi_Host *sh =virtio_scsi_host (vdev);struct virtio_scsi *vscsi =shost_priv (sh); +int err; + + err =virtscsi_init (vdev, vscsi); +if (err) +return err; + + err =register_hotcpu_notifier (&vscsi->nb); +if (err) + vdev->config->del_vqs (vdev); -return virtscsi_init (vdev, vscsi); +return err; }#endif
drivers/staging/lustre/lustre/ptlrpc/niobuf.c +3 -3
@@ -179,7 +179,7 @@ int ptlrpc_register_bulk(struct ptlrpc_request *req) LNET_UNLINK, LNET_INS_AFTER, &me_h);if (rc !=0 ) {CERROR ("%s: LNetMEAttach failed x" LPU64 "/%d: rc = %d\n" , - desc->bd_export->exp_obd->obd_name, xid, + desc->bd_import->imp_obd->obd_name, xid, posted_md, rc);break ; }
@@ -189,7 +189,7 @@ int ptlrpc_register_bulk(struct ptlrpc_request *req) &desc->bd_mds[posted_md]);if (rc !=0 ) {CERROR ("%s: LNetMDAttach failed x" LPU64 "/%d: rc = %d\n" , - desc->bd_export->exp_obd->obd_name, xid, + desc->bd_import->imp_obd->obd_name, xid, posted_md, rc); rc2 =LNetMEUnlink (me_h);LASSERT (rc2 ==0 );
@@ -219,7 +219,7 @@ int ptlrpc_register_bulk(struct ptlrpc_request *req)/* Holler if peer manages to touch buffers before he knows the xid */ if (desc->bd_md_count != total_md)CWARN ("%s: Peer %s touched %d buffers while I registered\n" , - desc->bd_export->exp_obd->obd_name,libcfs_id2str (peer), + desc->bd_import->imp_obd->obd_name,libcfs_id2str (peer), total_md - desc->bd_md_count);spin_unlock (&desc->bd_lock);
drivers/staging/rtl8712/usb_intf.c +5 -0
@@ -353,6 +353,10 @@ static void disable_ht_for_spec_devid(const struct usb_device_id *pdid, } } +static const struct device_type wlan_type = { + .name ="wlan" , +}; +/* * drv_init() - a device potentially for us *
@@ -388,6 +392,7 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf, padapter->pusb_intf = pusb_intf;usb_set_intfdata (pusb_intf, pnetdev);SET_NETDEV_DEV (pnetdev, &pusb_intf->dev); + pnetdev->dev.type = &wlan_type;/* step 2. */ padapter->dvobj_init = &r8712_usb_dvobj_init; padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
drivers/staging/vt6656/baseband.c +0 -3
@@ -1464,7 +1464,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)if ( bScanning ) {// need Max sensitivity //RSSI -69, -70,.... -if (pDevice->byBBPreEDIndex ==0 )break ; pDevice->byBBPreEDIndex =0 ;ControlvWriteByte (pDevice,MESSAGE_REQUEST_BBREG ,0xC9 ,0x00 );//CR201(0xC9) ControlvWriteByte (pDevice,MESSAGE_REQUEST_BBREG ,0xCE ,0x30 );//CR206(0xCE)
@@ -1607,7 +1606,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)if ( bScanning ) {// need Max sensitivity //RSSI -69, -70, ... -if (pDevice->byBBPreEDIndex ==0 )break ; pDevice->byBBPreEDIndex =0 ;ControlvWriteByte (pDevice,MESSAGE_REQUEST_BBREG ,0xC9 ,0x00 );//CR201(0xC9) ControlvWriteByte (pDevice,MESSAGE_REQUEST_BBREG ,0xCE ,0x24 );//CR206(0xCE)
@@ -1759,7 +1757,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)case RF_VT3342A0 ://RobertYu:20060627, testing table if ( bScanning ) {// need Max sensitivity //RSSI -67, -68, ... -if (pDevice->byBBPreEDIndex ==0 )break ; pDevice->byBBPreEDIndex =0 ;ControlvWriteByte (pDevice,MESSAGE_REQUEST_BBREG ,0xC9 ,0x00 );//CR201(0xC9) ControlvWriteByte (pDevice,MESSAGE_REQUEST_BBREG ,0xCE ,0x38 );//CR206(0xCE)
drivers/staging/vt6656/card.c +1 -1
@@ -731,7 +731,7 @@ u64 CARDqGetNextTBTT(u64 qwTSF, u16 wBeaconInterval) uBeaconInterval = wBeaconInterval *1024 ;// Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval - uLowNextTBTT = ((qwTSF &0xffffffffU ) >>10 ) <<10 ; + uLowNextTBTT = ((qwTSF &0xffffffffULL ) >>10 ) <<10 ; uLowRemain = (uLowNextTBTT) % uBeaconInterval; uHighRemain = ((0x80000000 % uBeaconInterval) *2 * (u32)(qwTSF >>32 )) % uBeaconInterval;
drivers/staging/zram/zram_drv.c +2 -2
@@ -552,14 +552,14 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)size_t index;struct zram_meta *meta; -flush_work (&zram->free_work); -down_write (&zram->init_lock);if (!zram->init_done) {up_write (&zram->init_lock);
Lines of this file are not shown. View the raw message.
drivers/target/iscsi/iscsi_target_nego.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/tty/serial/atmel_serial.c +28 -17
45 lines not on this page · raw message
drivers/usb/class/cdc-wdm.c +38 -32
70 lines not on this page · raw message
drivers/usb/core/hub.c +16 -37
53 lines not on this page · raw message
fs/hpfs/alloc.c +64 -2
66 lines not on this page · raw message
security/integrity/ima/ima_template_lib.c +1 -1
Lines of this file are not shown. View the raw message.
sound/pci/hda/patch_realtek.c +46 -5
51 lines not on this page · raw message
sound/soc/codecs/wm5110.c +48 -0
48 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.
Quoted 4 lines · Greg KH
I'm announcing the release of the 3.13.2 kernel.
All users of the 3.13 kernel series must upgrade.
Quoted 9 lines
The updated 3.13.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.gitlinux-3.13.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summarythanks,
greg k-h
Hi Greg,
I noticed that the following two target upstream patches in v3.14-rc1 did not make it into v3.13.y or stable-queue.git:
commit 6f6b5d1ec56acdeab0503d2b823f6f88a0af493e
Author: Kent Overstreet <[email protected]> Date: Sun Jan 19 08:26:37 2014 +0000
percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask
commit 555b270e25b0279b98083518a85f4b1da144a181
Author: Nicholas Bellinger <[email protected]> Date: Mon Jan 20 03:36:24 2014 +0000
iscsi-target: Fix connection reset hang with percpu_ida_alloc
These two patches have been respun for v3.13.y code here:
http://www.spinics.net/lists/target-devel/msg06191.html
http://www.spinics.net/lists/target-devel/msg06192.html
Please apply for v3.13.y ASAP.
Thank you,
--nab
Greg KH
maintainerQuoted 30 lines · Nicholas A. Bellinger
Quoted 4 lines · Greg KH
I'm announcing the release of the 3.13.2 kernel.
All users of the 3.13 kernel series must upgrade.
Quoted 9 lines
The updated 3.13.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.gitlinux-3.13.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summarythanks,
greg k-h
Hi Greg,
I noticed that the following two target upstream patches in v3.14-rc1 did not make it into v3.13.y or stable-queue.git:
commit
6f6b5d1ec56acdeab0503d2b823f6f88a0af493eAuthor: Kent Overstreet <[email protected]> Date: Sun Jan 19 08:26:37 2014 +0000
percpu_ida: Makepercpu_ida_alloc+ callers accept task state bitmaskcommit
555b270e25b0279b98083518a85f4b1da144a181Author: Nicholas Bellinger <[email protected]> Date: Mon Jan 20 03:36:24 2014 +0000
Quoted 8 lines
iscsi-target: Fix connection reset hang with
percpu_ida_allocThese two patches have been respun for v3.13.y code here:
http://www.spinics.net/lists/target-devel/msg06191.html
http://www.spinics.net/lists/target-devel/msg06192.htmlPlease apply for v3.13.y ASAP.
They are in my queue, I have a few hundred other patches to dig through as well. Don't worry, they aren't lost...
Same goes for 3.12 and the other patches you have resent me, please be patient.
thanks,
greg k-h