Skip to contentSkip to conversation

ARM: shmobile: Make use of r8a7790_add_standard_devices()

PATCH New Magnus Damm 2 participants 2 messages Feb 24, 2014 – Mar 7, 2014

Subsystems (4)
Arm (32-bit) Arm sub-architectures SuperH Arm/RISC-V/Renesas architecture
lore
Share & tools
lore

Magnus Damm

author maintainer
#0 lore raw

PATCH 1/1 ARM: shmobile: Make use of r8a7790_add_standard_devices()

From: Magnus Damm <[email protected]>

Move non-PFC and non-GPIO devices off from r8a7790_pinmux_init() and into r8a7790_add_standard_devices() which is the normal place to keep regular devices in the legacy case.

Signed-off-by Magnus Damm <[email protected]>

---

 arch/arm/mach-shmobile/setup-r8a7790.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/mach-shmobile/setup-r8a7790.c +6 -6
@@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
-	r8a7790_register_i2c(0);
-	r8a7790_register_i2c(1);
-	r8a7790_register_i2c(2);
-	r8a7790_register_i2c(3);
-	r8a7790_register_audio_dmac(0);
-	r8a7790_register_audio_dmac(1);
 }
 
 #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq)		\

@@ -308,6 +302,12 @@ void __init r8a7790_add_standard_devices
 	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
+	r8a7790_register_audio_dmac(0);
+	r8a7790_register_audio_dmac(1);
 }
 
 void __init r8a7790_init_early(void)
#1 lore raw

PATCH 1/1 ARM: shmobile: Make use of r8a7790_add_standard_devices()

Quoted 7 lines · Magnus Damm

From: Magnus Damm <[email protected]>

Move non-PFC and non-GPIO devices off from r8a7790_pinmux_init() and into r8a7790_add_standard_devices() which is the normal place to keep regular devices in the legacy case.

Signed-off-by Magnus Damm <[email protected]>

Thanks, I have queued this up.