Skip to contentSkip to conversation

x86, kaslr: randomize module base load address

PATCH New Kees Cook 2 participants 2 messages Feb 26, 2014

Subsystems (2)
lore
Share & tools
lore

Kees Cook

author
#0 lore raw

PATCH v3 1/1 x86, kaslr: randomize module base load address

Randomize the load address of modules in the kernel to make kASLR effective for modules. Modules can only be loaded within a particular range of virtual address space. This patch adds 10 bits of entropy to the load address by adding 1-1024 * PAGE_SIZE to the beginning range where modules are loaded.

The single base offset was chosen because randomizing each module load ends up wasting/fragmenting memory too much. Prior approaches to minimizing fragmentation while doing randomization tend to result in worse entropy than just doing a single base address offset.

Example kASLR boot without this change, with a single module loaded:
---[ Modules ]---

0xffffffffc0000000-0xffffffffc0001000           4K     ro     GLB x  pte
0xffffffffc0001000-0xffffffffc0002000           4K     ro     GLB NX pte
0xffffffffc0002000-0xffffffffc0004000           8K     RW     GLB NX pte
0xffffffffc0004000-0xffffffffc0200000        2032K                   pte
0xffffffffc0200000-0xffffffffff000000        1006M                   pmd

---[ End Modules ]---

Example kASLR boot after this change, same module loaded:
---[ Modules ]---

0xffffffffc0000000-0xffffffffc0200000           2M                   pmd
0xffffffffc0200000-0xffffffffc03bf000        1788K                   pte
0xffffffffc03bf000-0xffffffffc03c0000           4K     ro     GLB x  pte
0xffffffffc03c0000-0xffffffffc03c1000           4K     ro     GLB NX pte
0xffffffffc03c1000-0xffffffffc03c3000           8K     RW     GLB NX pte

0xffffffffc03c3000-0xffffffffc0400000 244K pte
0xffffffffc0400000-0xffffffffff000000 1004M pmd
---[ End Modules ]---

---
v3:
- describe base address choice in commit message; hpa.
v2:
- update Documentation/kernel-parameters.txt; akpm.

---
 Documentation/kernel-parameters.txt |    4 ++--
 arch/x86/kernel/module.c            |   43 ++++++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 5 deletions(-)
Documentation/kernel-parameters.txt +2 -2
index 7116fda7077f..580a60cabd9b 100644
@@ -2053,8 +2053,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			IOAPICs that may be present in the system.
 
 	nokaslr		[X86]
-			Disable kernel base offset ASLR (Address Space
-			Layout Randomization) if built into the kernel.
+			Disable kernel and module base offset ASLR (Address
+			Space Layout Randomization) if built into the kernel.
 
 	noautogroup	Disable scheduler automatic task group creation.
 
arch/x86/kernel/module.c +40 -3

59 lines not on this page · raw message

Signature · 6 lines
1.7.9.5


-- 
Kees Cook
Chrome OS Security
#1 lore raw
x86, kaslr: randomize module base load address
Commit-ID:  e2b32e6785138d92d2a40e0d0473575c8c7310a2
Gitweb:     http://git.kernel.org/tip/e2b32e6785138d92d2a40e0d0473575c8c7310a2
Author:     Kees Cook <[email protected]>
AuthorDate: Tue, 25 Feb 2014 16:59:17 -0800
Committer:  H. Peter Anvin <[email protected]>
CommitDate: Tue, 25 Feb 2014 17:07:26 -0800

x86, kaslr: randomize module base load address

Randomize the load address of modules in the kernel to make kASLR effective for modules. Modules can only be loaded within a particular range of virtual address space. This patch adds 10 bits of entropy to the load address by adding 1-1024 * PAGE_SIZE to the beginning range where modules are loaded.

The single base offset was chosen because randomizing each module load ends up wasting/fragmenting memory too much. Prior approaches to minimizing fragmentation while doing randomization tend to result in worse entropy than just doing a single base address offset.

Example kASLR boot without this change, with a single module loaded:
---[ Modules ]---

0xffffffffc0000000-0xffffffffc0001000           4K     ro     GLB x  pte
0xffffffffc0001000-0xffffffffc0002000           4K     ro     GLB NX pte
0xffffffffc0002000-0xffffffffc0004000           8K     RW     GLB NX pte
0xffffffffc0004000-0xffffffffc0200000        2032K                   pte
0xffffffffc0200000-0xffffffffff000000        1006M                   pmd

---[ End Modules ]---

Example kASLR boot after this change, same module loaded:
---[ Modules ]---

0xffffffffc0000000-0xffffffffc0200000           2M                   pmd
0xffffffffc0200000-0xffffffffc03bf000        1788K                   pte
0xffffffffc03bf000-0xffffffffc03c0000           4K     ro     GLB x  pte
0xffffffffc03c0000-0xffffffffc03c1000           4K     ro     GLB NX pte
0xffffffffc03c1000-0xffffffffc03c3000           8K     RW     GLB NX pte

0xffffffffc03c3000-0xffffffffc0400000 244K pte
0xffffffffc0400000-0xffffffffff000000 1004M pmd
---[ End Modules ]---

---
 Documentation/kernel-parameters.txt |  4 ++--
 arch/x86/kernel/module.c            | 43 ++++++++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 5 deletions(-)
Documentation/kernel-parameters.txt +2 -2
index 7116fda..580a60c 100644
@@ -2053,8 +2053,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			IOAPICs that may be present in the system.
 
 	nokaslr		[X86]
-			Disable kernel base offset ASLR (Address Space
-			Layout Randomization) if built into the kernel.
+			Disable kernel and module base offset ASLR (Address
+			Space Layout Randomization) if built into the kernel.
 
 	noautogroup	Disable scheduler automatic task group creation.
 
arch/x86/kernel/module.c +40 -3

59 lines not on this page · raw message