build failure on armel (debian)
----- Original Message -----
Quoted 32 lines
From: "Jon Bernard" <[email protected]>
To: [email protected]
Sent: Tuesday, May 6, 2014 11:14:03 AM
Subject: [lttng-dev] [lttng-tools] build failure on armel (debian)Hey guys,
This bug¹ was filed recently:
your package no longer builds on the armel buildds:
https://buildd.debian.org/status/fetch.php?pkg=ltt-control&arch=armel&ver=2.4.1-1&stamp=1397064419> CC rculfhash.lo
>/tmp/ccBG89vh.s: Assembler messages:
>/tmp/ccBG89vh.s:1105: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:1286: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3175: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3725: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3833: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3994: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:4331: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:5292: Error: selected processor does not support ARM > mode `dmb'
> make[4]: *** [rculfhash.lo] Error 1
Quoted 7 lines
The public buildd that I can use to test this is unreachable at the moment, but maybe a solution can be reached without further debug info?
The build machine is ARMv7, which supports dmb IIUC, so I'm a bit puzzled on this one.
Any thoughts?
Perhaps the build itself has been changed to target ARMv6 ?
Starting with ARMv7, dmb should be there.
For ARMv6 support (and less), the Linux kernel provides a vDSO page implementing __kuser_memory_barrier. If you really need to build for ARMv6, this might be something to look into.
I guess we'll need more information about your build target.
Thanks,
Mathieu
Quoted 11 lines
¹ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=745891
--
Jon_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
Signature · 8 lines
Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com _______________________________________________ lttng-dev mailing list [email protected] http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
Quoted 45 lines · Mathieu Desnoyers
----- Original Message -----
Quoted 32 lines
From: "Jon Bernard" <[email protected]>
To: [email protected]
Sent: Tuesday, May 6, 2014 11:14:03 AM
Subject: [lttng-dev] [lttng-tools] build failure on armel (debian)Hey guys,
This bug¹ was filed recently:
your package no longer builds on the armel buildds:
https://buildd.debian.org/status/fetch.php?pkg=ltt-control&arch=armel&ver=2.4.1-1&stamp=1397064419> CC rculfhash.lo
>/tmp/ccBG89vh.s: Assembler messages:
>/tmp/ccBG89vh.s:1105: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:1286: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3175: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3725: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3833: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:3994: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:4331: Error: selected processor does not support ARM > mode `dmb'
>/tmp/ccBG89vh.s:5292: Error: selected processor does not support ARM > mode `dmb'
> make[4]: *** [rculfhash.lo] Error 1Quoted 7 lines
The public buildd that I can use to test this is unreachable at the moment, but maybe a solution can be reached without further debug info?
The build machine is ARMv7, which supports dmb IIUC, so I'm a bit puzzled on this one.
Any thoughts?
Perhaps the build itself has been changed to target ARMv6 ?
Starting with ARMv7, dmb should be there.
Quoted 7 lines
For ARMv6 support (and less), the Linux kernel provides a vDSO page implementing
__kuser_memory_barrier. If you really need to build for ARMv6, this might be something to look into.I guess we'll need more information about your build target.
Here is a full build log: http://sprunge.us/FIJe
Build occurred on this machine:
Linux abel 3.13-1-armmp-lpae #4 SMP Thu Mar 27 16:56:17 UTC 2014 armv7l GNU/Linux
Is there anything else I should include?
Signature · 1 line
Jon
This is very likely caused by a configuration issue with your userspace RCU library, or by a configuration issue with your lttng-tools (at the very least, a discrepancy between the two).
If we look at urcu:
urcu/arch/arm.h:
#ifdef CONFIG_RCU_ARM_HAVE_DMB
#define cmm_mb() __asm__ __volatile__ ("dmb":::"memory")
#define cmm_rmb() __asm__ __volatile__ ("dmb":::"memory")
#define cmm_wmb() __asm__ __volatile__ ("dmb":::"memory")#endif /* CONFIG_RCU_ARM_HAVE_DMB */
you probably have this config option defined by the config.h generated by urcu. This is probably a discrepancy between your urcu configuration and the compiler target used when building lttng-tools.
Thoughts ?
Thanks,
Mathieu
----- Original Message -----
Quoted 80 lines
From: "Jon Bernard" <[email protected]>
To: "Mathieu Desnoyers" <[email protected]>
Cc: [email protected]
Sent: Tuesday, May 20, 2014 3:15:57 PM
Subject: Re: [lttng-dev] [lttng-tools] build failure on armel (debian)Quoted 53 lines · Mathieu Desnoyers
----- Original Message -----
Quoted 40 lines
From: "Jon Bernard" <[email protected]>
To: [email protected]
Sent: Tuesday, May 6, 2014 11:14:03 AM
Subject: [lttng-dev] [lttng-tools] build failure on armel (debian)Hey guys,
This bug¹ was filed recently:
your package no longer builds on the armel buildds:
https://buildd.debian.org/status/fetch.php?pkg=ltt-control&arch=armel&ver=2.4.1-1&stamp=1397064419> CC rculfhash.lo
>/tmp/ccBG89vh.s: Assembler messages:
>/tmp/ccBG89vh.s:1105: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:1286: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:3175: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:3725: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:3833: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:3994: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:4331: Error: selected processor does not support > ARM
> mode `dmb'
>/tmp/ccBG89vh.s:5292: Error: selected processor does not support > ARM
> mode `dmb'
> make[4]: *** [rculfhash.lo] Error 1Quoted 7 lines
The public buildd that I can use to test this is unreachable at the moment, but maybe a solution can be reached without further debug info?
The build machine is ARMv7, which supports dmb IIUC, so I'm a bit puzzled on this one.
Any thoughts?
Perhaps the build itself has been changed to target ARMv6 ?
Starting with ARMv7, dmb should be there.
Quoted 7 lines
For ARMv6 support (and less), the Linux kernel provides a vDSO page implementing
__kuser_memory_barrier. If you really need to build for ARMv6, this might be something to look into.I guess we'll need more information about your build target.
Here is a full build log: http://sprunge.us/FIJe
Build occurred on this machine:
Linux abel 3.13-1-armmp-lpae #4 SMP Thu Mar 27 16:56:17 UTC 2014 armv7l GNU/LinuxIs there anything else I should include?
--
Jon
Signature · 8 lines
Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com _______________________________________________ lttng-dev mailing list [email protected] http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev