How user space applications load registers on HSW?]
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 20 lines · Rong R
Hi,
I am developing the HSW’s OCL driver in the linux. I encounter a LRI problem on HSW.
Some gpgpu's applications, which use the shared local memory, must load the L3CTRLREG2 and L3CTRLREG3 registers to allocate the SLM in the L3 cache.
So I add L3CTRLREG2 and L3CTRLREG3 to the
gen7_render_regsto pass the cmds parse when exec buffer. But it still don’t work.I notice that, on HSW, the commands that load the register, such as
MI_LOAD_REGISTER_IMM, will be converted to NOOP by the GPU if the batch buffer'sMI_BATCH_NON_SECURE_HSWbit is set. And after parse cmd, theMI_BATCH_NON_SECURE_HSWstill set in the kernel. So HSW don’t accept LRI commands.
Quoted 5 lines
Can I load these registers in the user space? Or should I hack the kernel?
Yang Rong
I've been asking the kernel developers for the ability to LRI/LRM from userspace batches for around 1.5 years. Unfortunately, we're still waiting, and I honestly have no idea when they're going to finish it.
In the meantime, you can apply the attached patch to your kernel tree to disable the hardware scanner, letting you run whatever commands you want. Obviously, we can't ship this on production systems, but it will allow you to do your development without having to wait for the kernel team.
--Ken
drivers/gpu/drm/i915/i915_gem_execbuffer.c +1 -0
@@ -995,6 +995,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,return ret; flags =0 ; + flags |=I915_DISPATCH_SECURE ;if (args->flags &I915_EXEC_SECURE ) {if (!file->is_master || !capable (CAP_SYS_ADMIN ))return -EPERM ;
_______________________________________________
mesa-dev mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
Re: [Mesa-dev] [[email protected]: How user space applications load registers on HSW?]
Hi, Ken,
Thanks for your patch.
But how do you release your driver on the HSW products? If can't LRI/LRM from userspace batches, almost all of OpenCL application can't run. So if I want to announce that the OpenCL driver support HSW, it must have a way to load L3CTRLREG2 and L3CTRLREG3.
Hi, Ben
There are only two immediate values need to load L3CTRLREG2 and L3CTRLREG3 to enable and disable SLM. So can I add the flag to exec buffer? when exec buffer receive this flag,
load the immediate to L3CTRLREG2 and L3CTRLREG3. Is it acceptable?
Thanks.
-----Original Message-----
From: Kenneth Graunke [mailto:[email protected]]
Sent: Wednesday, May 07, 2014 2:57 AM
To: Yang, Rong R
Cc: Ben Widawsky; mesa-dev; intel-gfx
Subject: Re: [Mesa-dev] [[email protected]: [Intel-gfx] How user space applications load registers on HSW?]
Quoted 20 lines · Rong R
Hi,
I am developing the HSW's OCL driver in the linux. I encounter a LRI problem on HSW.
Some gpgpu's applications, which use the shared local memory, must load the L3CTRLREG2 and L3CTRLREG3 registers to allocate the SLM in the L3 cache.
So I add L3CTRLREG2 and L3CTRLREG3 to the
gen7_render_regsto pass the cmds parse when exec buffer. But it still don't work.I notice that, on HSW, the commands that load the register, such as
MI_LOAD_REGISTER_IMM, will be converted to NOOP by the GPU if the batch buffer'sMI_BATCH_NON_SECURE_HSWbit is set. And after parse cmd, theMI_BATCH_NON_SECURE_HSWstill set in the kernel. So HSW don't accept LRI commands.
Quoted 5 lines
Can I load these registers in the user space? Or should I hack the kernel?
Yang Rong
I've been asking the kernel developers for the ability to LRI/LRM from userspace batches for around 1.5 years. Unfortunately, we're still waiting, and I honestly have no idea when they're going to finish it.
In the meantime, you can apply the attached patch to your kernel tree to disable the hardware scanner, letting you run whatever commands you want. Obviously, we can't ship this on production systems, but it will allow you to do your development without having to wait for the kernel team.
--Ken
Re: [Mesa-dev] How user space applications load registers on HSW?
Quoted 7 lines · Rong R
Hi, Ken,
Thanks for your patch. But how do you release your driver on the HSW products? If can't LRI/LRM from userspace batches, almost all of OpenCL application can't run. So if I want to announce that the OpenCL driver support HSW, it must have a way to load L3CTRLREG2 and L3CTRLREG3.
Most of the OpenGL features don't need LRI/LRM. Currently, only a few OpenGL 4.0 extensions (ARB_transform_feedback2/3/instanced) and the perforrmance monitoring extensions need LRI/LRM...and we just don't ship those on Haswell yet. I'd really like to, but we can't yet.
You'll need to talk to Jesse, Brad, and Daniel to figure out when the kernel interface will be finished.
--Ken
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Rong R
Hi, Ken,
Thanks for your patch.
But how do you release your driver on the HSW products? If can't LRI/LRM from userspace batches, almost all of OpenCL application can't run. So if I want to announce that the OpenCL driver support HSW, it must have a way to load L3CTRLREG2 and L3CTRLREG3.
mesa doesn't do L3 control afaik.
Quoted 4 lines
Hi, Ben
There are only two immediate values need to load L3CTRLREG2 and L3CTRLREG3 to enable and disable SLM. So can I add the flag to exec buffer? when exec buffer receive this flag,
load the immediate to L3CTRLREG2 and L3CTRLREG3. Is it acceptable?
I think I'll reject this in the hopes that this will speed up the command parser ...
Thanks, Daniel
Quoted 46 lines
Thanks.
-----Original Message-----
From: Kenneth Graunke [mailto:[email protected]]
Sent: Wednesday, May 07, 2014 2:57 AM
To: Yang, Rong R
Cc: Ben Widawsky; mesa-dev; intel-gfx
Subject: Re: [Mesa-dev] [[email protected]: [Intel-gfx] How user space applications load registers on HSW?]Quoted 20 lines · Rong R
Hi,
I am developing the HSW's OCL driver in the linux. I encounter a LRI problem on HSW.
Some gpgpu's applications, which use the shared local memory, must load the L3CTRLREG2 and L3CTRLREG3 registers to allocate the SLM in the L3 cache.
So I add L3CTRLREG2 and L3CTRLREG3 to the
gen7_render_regsto pass the cmds parse when exec buffer. But it still don't work.I notice that, on HSW, the commands that load the register, such as
MI_LOAD_REGISTER_IMM, will be converted to NOOP by the GPU if the batch buffer'sMI_BATCH_NON_SECURE_HSWbit is set. And after parse cmd, theMI_BATCH_NON_SECURE_HSWstill set in the kernel. So HSW don't accept LRI commands.Quoted 5 lines
Can I load these registers in the user space? Or should I hack the kernel?
Yang Rong
I've been asking the kernel developers for the ability to LRI/LRM from userspace batches for around 1.5 years. Unfortunately, we're still waiting, and I honestly have no idea when they're going to finish it.
In the meantime, you can apply the attached patch to your kernel tree to disable the hardware scanner, letting you run whatever commands you want. Obviously, we can't ship this on production systems, but it will allow you to do your development without having to wait for the kernel team.
--Ken
_______________________________________________
mesa-dev mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Hi Daniel,
We need a solution for this.
Without correct L3 config setting, all the OpenCL programs that use SLM will fail.
We cannot set a default L3 config for all OCL programs, because L3 config for SLM will slowdown kernel that are not using SLM. When do you think the command parser could be ready?
Thanks
Zou Nanhai
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Tuesday, May 13, 2014 2:11 PM
To: Yang, Rong R
Cc: Kenneth Graunke; Zou, Nanhai; mesa-dev; Ben Widawsky; intel-gfx
Subject: Re: [Mesa-dev] [[email protected]: [Intel-gfx] How user space applications load registers on HSW?]
Quoted 5 lines · Rong R
Hi, Ken,
Thanks for your patch.
But how do you release your driver on the HSW products? If can't LRI/LRM from userspace batches, almost all of OpenCL application can't run. So if I want to announce that the OpenCL driver support HSW, it must have a way to load L3CTRLREG2 and L3CTRLREG3.
mesa doesn't do L3 control afaik.
Quoted 4 lines
Hi, Ben
There are only two immediate values need to load L3CTRLREG2 and
L3CTRLREG3 to enable and disable SLM. So can I add the flag to exec buffer? when exec buffer receive this flag, load the immediate to L3CTRLREG2 and L3CTRLREG3. Is it acceptable?
I think I'll reject this in the hopes that this will speed up the command parser ...
Thanks, Daniel
Quoted 40 lines
Thanks.
-----Original Message-----
From: Kenneth Graunke [mailto:[email protected]]
Sent: Wednesday, May 07, 2014 2:57 AM
To: Yang, Rong R
Cc: Ben Widawsky; mesa-dev; intel-gfx
Subject: Re: [Mesa-dev] [[email protected]: [Intel-gfx] How user space applications load registers on HSW?]Quoted 20 lines · Rong R
Hi,
I am developing the HSW's OCL driver in the linux. I encounter a LRI problem on HSW.
Some gpgpu's applications, which use the shared local memory, must load the L3CTRLREG2 and L3CTRLREG3 registers to allocate the SLM in the L3 cache.
So I add L3CTRLREG2 and L3CTRLREG3 to the
gen7_render_regsto pass the cmds parse when exec buffer. But it still don't work.I notice that, on HSW, the commands that load the register, such as
MI_LOAD_REGISTER_IMM, will be converted to NOOP by the GPU if the batch buffer'sMI_BATCH_NON_SECURE_HSWbit is set. And after parse cmd, theMI_BATCH_NON_SECURE_HSWstill set in the kernel. So HSW don't accept LRI commands.Quoted 5 lines
Can I load these registers in the user space? Or should I hack the kernel?
Yang Rong
I've been asking the kernel developers for the ability to LRI/LRM from userspace batches for around 1.5 years. Unfortunately, we're still waiting, and I honestly have no idea when they're going to finish it.
Quoted 7 lines
In the meantime, you can apply the attached patch to your kernel tree to disable the hardware scanner, letting you run whatever commands you want. Obviously, we can't ship this on production systems, but it will allow you to do your development without having to wait for the kernel team.
--Ken
_______________________________________________
mesa-dev mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch