drivers/hwmon: bugfix and support for emc1412 in emc1403.c
PATCH 1/1 drivers/hwmon: bugfix and support for emc1412 in emc1403.c
Adds support for emc1412 to emc1403.c + minor bugfix
* Renamed generic thermal_* prefixed names to emc1403_*
* Fixed set_hyst being broken (i. e. writing 86000 set hysteresis to 84000)
* Added support for emc1412
---
drivers/hwmon/emc1403.c +107 -33
@@ -34,13 +34,14 @@#include <linux/mutex.h> #include <linux/jiffies.h> -#define THERMAL_PID_REG 0xfd -#define THERMAL_SMSC_ID_REG 0xfe -#define THERMAL_REVISION_REG 0xff +#define EMC1403_HYST_REG 0x21 +#define EMC1403_PID_REG 0xfd +#define EMC1403_SMSC_ID_REG 0xfe +#define EMC1403_REVISION_REG 0xff -struct thermal_data { +struct emc1403_data {struct i2c_client *client; -const struct attribute_group *groups[3 ]; +const struct attribute_group *groups[2 ];struct mutex mutex;/* * Cache the hyst value so we don't keep re-reading it. In theory
@@ -54,7 +55,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); -struct thermal_data *data =dev_get_drvdata (dev); +struct emc1403_data *data =dev_get_drvdata (dev);int retval; retval =i2c_smbus_read_byte_data (data->client, sda->index);
@@ -67,7 +68,7 @@ static ssize_t show_bit(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr); -struct thermal_data *data =dev_get_drvdata (dev); +struct emc1403_data *data =dev_get_drvdata (dev);int retval; retval =i2c_smbus_read_byte_data (data->client, sda->nr);
@@ -80,7 +81,7 @@ static ssize_t store_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); -struct thermal_data *data =dev_get_drvdata (dev); +struct emc1403_data *data =dev_get_drvdata (dev);unsigned long val;int retval;
@@ -97,7 +98,7 @@ static ssize_t store_bit(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr); -struct thermal_data *data =dev_get_drvdata (dev); +struct emc1403_data *data =dev_get_drvdata (dev);struct i2c_client *client = data->client;unsigned long val;int retval;
@@ -126,7 +127,7 @@ static ssize_t show_hyst(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); -struct thermal_data *data =dev_get_drvdata (dev); +struct emc1403_data *data =dev_get_drvdata (dev);struct i2c_client *client = data->client;int retval;int hyst;
@@ -136,7 +137,7 @@ static ssize_t show_hyst(struct device *dev,return retval;if (time_after (jiffies, data->hyst_valid)) { - hyst =i2c_smbus_read_byte_data (client,0x21 ); + hyst =i2c_smbus_read_byte_data (client,EMC1403_HYST_REG );if (hyst <0 )return retval; data->cached_hyst = hyst;
@@ -149,7 +150,7 @@ static ssize_t store_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); -struct thermal_data *data =dev_get_drvdata (dev); +struct emc1403_data *data =dev_get_drvdata (dev);struct i2c_client *client = data->client;int retval;int hyst;
@@ -163,14 +164,14 @@ static ssize_t store_hyst(struct device *dev,if (retval <0 ) goto fail; - hyst = val - retval *1000 ; + hyst = retval *1000 - val; hyst =DIV_ROUND_CLOSEST (hyst,1000 );if (hyst <0 || hyst >255 ) { retval = -ERANGE ; goto fail; } - retval =i2c_smbus_write_byte_data (client,0x21 , hyst); + retval =i2c_smbus_write_byte_data (client,EMC1403_HYST_REG , hyst);if (retval =0 ) { retval = count; data->cached_hyst = hyst;
@@ -252,6 +253,28 @@ static SENSOR_DEVICE_ATTR(temp4_crit_hyst, S_IRUGO | S_IWUSR, static SENSOR_DEVICE_ATTR_2(power_state, S_IRUGO | S_IWUSR, show_bit, store_bit, 0x03, 0x40); + +static struct attribute *emc1412_attrs[] = { + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_power_state.dev_attr.attr, +NULL +}; + +static const struct attribute_group emc1412_group = { + .attrs = emc1412_attrs, +}; +static struct attribute *emc1403_attrs[] = { &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -261,6 +284,7 @@ static struct attribute *emc1403_attrs[] = { &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_crit.dev_attr.attr,
@@ -269,6 +293,7 @@ static struct attribute *emc1403_attrs[] = { &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_crit.dev_attr.attr,
@@ -277,6 +302,7 @@ static struct attribute *emc1403_attrs[] = { &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, + &sensor_dev_attr_power_state.dev_attr.attr, NULL };
@@ -286,6 +312,33 @@ static const struct attribute_group emc1403_group = { };static struct attribute *emc1404_attrs[] = { + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr, &sensor_dev_attr_temp4_crit.dev_attr.attr,
@@ -294,6 +347,8 @@ static struct attribute *emc1404_attrs[] = { &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_power_state.dev_attr.attr, NULL };
@@ -301,18 +356,23 @@ static const struct attribute_group emc1404_group = { .attrs = emc1404_attrs, }; + +static int emc1403_detect (struct i2c_client *client,struct i2c_board_info *info) {int id; -/* Check if thermal chip is SMSC and EMC1403 or EMC1423 */ +/* Check whether the chip is SMSC and get its type */ - id =i2c_smbus_read_byte_data (client,THERMAL_SMSC_ID_REG ); + id =i2c_smbus_read_byte_data (client,EMC1403_SMSC_ID_REG );if (id !=0x5d )return -ENODEV ; - id =i2c_smbus_read_byte_data (client,THERMAL_PID_REG ); + id =i2c_smbus_read_byte_data (client,EMC1403_PID_REG );switch (id) { +case 0x20 : +strlcpy (info->type,"emc1412" ,I2C_NAME_SIZE ); +break ;case 0x21 :strlcpy (info->type,"emc1403" ,I2C_NAME_SIZE );break ;
@@ -329,20 +389,20 @@ static int emc1403_detect(struct i2c_client *client,return -ENODEV ; } - id =i2c_smbus_read_byte_data (client,THERMAL_REVISION_REG ); -if (id !=0x01 ) + id =i2c_smbus_read_byte_data (client,EMC1403_REVISION_REG ); +if (id !=0x01 && id !=0x04 ) {return -ENODEV ; - + }return 0 ; }static int emc1403_probe (struct i2c_client *client,const struct i2c_device_id *id) { -struct thermal_data *data; +struct emc1403_data *data;struct device *hwmon_dev; - data =devm_kzalloc (&client->dev,sizeof (struct thermal_data ), + data =devm_kzalloc (&client->dev,sizeof (struct emc1403_data ),GFP_KERNEL );if (data =NULL )return -ENOMEM ;
@@ -351,9 +411,17 @@ static int emc1403_probe(struct i2c_client *client,mutex_init (&data->mutex); data->hyst_valid = jiffies -1 ;/* Expired */ - data->groups[0 ] = &emc1403_group; -if (id->driver_data) - data->groups[1 ] = &emc1404_group; +switch (id->driver_data) { +case 0 : + data->groups[0 ] = &emc1412_group; +break ; +case 1 : + data->groups[0 ] = &emc1403_group; +break ; +case 2 : + data->groups[0 ] = &emc1404_group; +break ; + } hwmon_dev = hwmon_device_register_with_groups(&client->dev, client->name, data,
@@ -361,24 +429,29 @@ static int emc1403_probe(struct i2c_client *client,if (IS_ERR (hwmon_dev))return PTR_ERR (hwmon_dev); -dev_info (&client->dev,"%s Thermal chip found\n" , id->name); +dev_info (&client->dev,"%s thermal chip found.\n" , id->name);return 0 ; }static const unsigned short emc1403_address_list[] = { -0x18 ,0x29 ,0x4c ,0x4d ,I2C_CLIENT_END +/* emc1403/emc1404/emc1423/emc1424 */ +0x4c ,0x4d ,0x18 ,0x29 , +/* emc1412 */ +0x5c ,0x4c ,0x6c ,0x1c ,0x3c ,I2C_CLIENT_END }; +/* Last number in name indicates the amount of channels */ static const struct i2c_device_id emc1403_idtable[] = { - {"emc1403" ,0 }, - {"emc1404" ,1 }, - {"emc1423" ,0 }, - {"emc1424" ,1 }, + {"emc1412" ,0 }, + {"emc1403" ,1 }, + {"emc1423" ,1 }, + {"emc1404" ,2 }, + {"emc1424" ,2 }, { } };MODULE_DEVICE_TABLE (i2c, emc1403_idtable); -static struct i2c_driver sensor_emc1403 = { +static struct i2c_driver emc1403_driver = { .class =I2C_CLASS_HWMON , .driver = { .name ="emc1403" ,
@@ -389,8 +462,9 @@ static struct i2c_driver sensor_emc1403 = { .address_list = emc1403_address_list, }; -module_i2c_driver (sensor_emc1403); +module_i2c_driver (emc1403_driver);MODULE_AUTHOR ("Kalhan Trisal <[email protected]" );MODULE_DESCRIPTION ("emc1403 Thermal Driver" );MODULE_LICENSE ("GPL v2" ); +MODULE_ALIAS ("i2c:emc1403" );
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi Josef,
Quoted 3 lines · Josef Gajdusek
Adds support for emc1412 to
emc1403.c+ minor bugfix* Renamed generic thermal_* prefixed names to emc1403_*
Why? This adds a lot of noise to your patch and the benefit isn't obvious. If you really want to do that, then it should be a separate patch.
Quoted 1 line
* Fixed
set_hystbeing broken (i. e. writing 86000 set hysteresis to 84000)
Bug fixes should be sent as separate patches, so that they can be ported back to stable, long-term and distribution kernels.
Quoted 5 lines
* Added support for emc1412
Signed-off-by Josef Gajdusek <[email protected]>+MODULE_ALIAS("i2c:emc1403");
Why add an alias which is already present?
Signature · 7 lines
Jean Delvare SUSE L3 Support _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 31 lines · Jean Delvare
Hi Josef,
Quoted 18 lines · Josef Gajdusek
Adds support for emc1412 to
emc1403.c+ minor bugfix* Renamed generic thermal_* prefixed names to emc1403_*
Why? This adds a lot of noise to your patch and the benefit isn't obvious. If you really want to do that, then it should be a separate patch.
Quoted 2 lines
* Fixed
set_hystbeing broken (i. e. writing 86000 set hysteresis to 84000)Bug fixes should be sent as separate patches, so that they can be ported back to stable, long-term and distribution kernels.
Quoted 6 lines
* Added support for emc1412
Signed-off-by Josef Gajdusek+MODULE_ALIAS("i2c:emc1403");
Quoted 6 lines
Why add an alias which is already present?
--
Jean Delvare
SUSE L3 Support
Hello,
thanks for your feedback. I am going to split and change the patches as you suggested and then resend within few hours.
Josef Gajdusek <[email protected]>
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors