Skip to contentSkip to conversation

BUG: unable to handle kernel NULL pointer dereference at 00000028

perf/x86/RAPL Fengguang Wu 2 participants 7 messages Jul 30, 2014 – Jul 31, 2014

lore
Share & tools
lore

Fengguang Wu

author Reviewed-by Maria Dimakopoulou Reviewed-by Andi Kleen Reviewed-by Maria Dimakopoulou Reviewed-by Andi Kleen
#0 lore raw

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author:     Stephane Eranian <[email protected]>
AuthorDate: Tue Nov 12 17:58:50 2013 +0100
Commit:     Ingo Molnar <[email protected]>
CommitDate: Wed Nov 27 11:16:40 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

+-----------------------------------------------------------+------------+------------+---------------+
|                                                           | 410136f5dd | 4788e5b4b2 | next-20140724 |
+-----------------------------------------------------------+------------+------------+---------------+
| boot_successes                                            | 1000       | 751        | 78            |
| boot_failures                                             | 0          | 149        | 3             |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference      | 0          | 132        | 2             |
| Oops                                                      | 0          | 132        | 2             |
| EIP_is_at_rapl_pmu_init                                   | 0          | 132        |               |
| Kernel_panic-not_syncing:Attempted_to_kill_init_exitcode= | 0          | 132        | 2             |
| backtrace:rapl_pmu_init                                   | 0          | 132        |               |
| backtrace:kernel_init_freeable                            | 0          | 132        | 2             |
| BUG:kernel_boot_hang                                      | 0          | 17         | 1             |
| EIP_is_at_validate_chain                                  | 0          | 0          | 2             |
| backtrace:free_reserved_area                              | 0          | 0          | 2             |
| backtrace:free_init_pages                                 | 0          | 0          | 2             |
| backtrace:populate_rootfs                                 | 0          | 0          | 2             |
+-----------------------------------------------------------+------------+------------+---------------+
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.736012] Oops: 0000 [#1] PREEMPT 
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

git bisect start v3.14 v3.13 --

git bisect  bad 09df7c4c8097ca4a11393b1edd4997d786daad52  # 16:18      0-      3  x86: Remove CONFIG_X86_OOSTORE
git bisect  bad 15c81026204da897a05424c79263aea861a782cc  # 16:24      2-      5  Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8  # 16:33      0-     15  Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good edde1fb8c41d0db7c8ce17fb32886da2e389b0cc  # 17:48    900+      0  Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
git bisect good a693c46e14c9fdadbcd68ddfa94a4f72495531a9  # 17:55    900+      0  Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 2cc3f16cad1561c6fc551aefff559e53726efc8b  # 18:12    900+      0  Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 9326657abe1a83ed4b4f396b923ca1217fd50cba  # 18:21      9-      2  Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 7bb73553e2490ac6667387ee723e0faa61e9d999  # 18:38      0-      1  tools lib traceevent: Get rid of die() in reparent_op_arg()
git bisect  bad 3d7c0144491bd8c21d53b43032274a85efdfe434  # 18:41     11-      4  perf tools: Add build and install plugins targets
git bisect  bad ba1ddf42f3c3af111d3adee277534f73c1ef6a9b  # 18:43      0-     15  perf script: Print mmap[2] events also
git bisect  bad a8b4c7014cadfdacd4e1f4c963128593be6f20de  # 18:49      0-      2  perf completion: Rename file to reflect zsh support
git bisect  bad 4788e5b4b2338f85fa42a712a182d8afd65d7c58  # 18:53      0-      1  perf/x86: Add Intel RAPL PMU support
git bisect good c912dae60ae6f659455f239298110adc67a5f3e9  # 19:33    900+     14  uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
git bisect good 09897d78dbc3a544426f2272b5601c62922ccab9  # 19:44    900+      0  Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:52    900+      0  tools/perf/stat: Add event unit and scale support
# first bad commit: [4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:56   1000+      0  tools/perf/stat: Add event unit and scale support
git bisect  bad 1a58d9909611972fd1c081bb04a9f7dc2571e612  # 19:58      0-      3  Add linux-next specific files for 20140724
git bisect  bad 82e13c71bc655b6dc7110da4e164079dadb44892  # 20:07    448-     10  Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
git bisect  bad 5a7439efd1c5c416f768fc550048ca130cf4bf99  # 20:14      2-      6  Add linux-next specific files for 20140725

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-i386.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(

	qemu-system-x86_64
	-enable-kvm
	-cpu Haswell,+smep,+smap
	-kernel $kernel
	-initrd $initrd
	-m 320
	-smp 1
	-net nic,vlan=1,model=e1000
	-net user,vlan=1
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null 

)

append=(

	hung_task_panic=1
	earlyprintk=ttyS0,115200
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	panic=10
	softlockup_panic=1
	nmi_watchdog=panic
	prompt_ramdisk=0
	console=ttyS0,115200
	console=tty0
	vga=normal
	root=/dev/ram0
	rw
	drbd.minor_count=8

)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Thanks,
Fengguang

_______________________________________________
LKP mailing list
LKP(a)linux.intel.com

early console in setup code
early console in decompress_kernel

Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel.

[    0.000000] Linux version 3.12.0-05711-g4788e5b (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #11 PREEMPT Fri Jul 25 18:52:39 CST 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000fdb00-0x000fdb0f] mapped at [c00fdb00]
[    0.000000]   mpc: fdb10-fdbf0
[    0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff]
[    0.000000]  [mem 0x13a00000-0x13bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff]
[    0.000000]  [mem 0x10000000-0x139fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x0fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff]
[    0.000000]  [mem 0x13c00000-0x13dfffff] page 2M
[    0.000000]  [mem 0x13e00000-0x13ffdfff] page 4k
[    0.000000] BRK [0x00f8f000, 0x00f8ffff] PGTABLE
[    0.000000] cma: CMA: reserved 16 MiB at 12c00000
[    0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff]
[    0.000000] ACPI: RSDP 000fd9a0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 13ffe4b0 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 13ffff80 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 13ffe4f0 0011A9 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 13ffff40 000040
[    0.000000] ACPI: SSDT 13fff800 000735 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 13fff6e0 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 13fff6a0 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13ffe000
[    0.000000]   low ram: 0 - 13ffe000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13ffd001, boot clock
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x13ffdfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x13ffdfff]
[    0.000000] On node 0 totalpages: 81820
[    0.000000] free_area_init_node: node 0, pgdat c09a3960, node_mem_map d2980020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77822 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: fdb10-fdbf0
[    0.000000] MPTABLE: OEM ID: BOCHSCPU
[    0.000000] MPTABLE: Product ID: 0.1         
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 1
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 827d80
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81180
[    0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic  prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:4788e5b4b2338f85fa42a712a182d8afd65d7c58:bisect-linux-9/.vmlinuz-4788e5b4b2338f85fa42a712a182d8afd65d7c58-20140725185250-1-kbuild branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58/vmlinuz-3.12.0-05711-g4788e5b drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Memory: 290612K/327280K available (4456K kernel code, 1644K rwdata, 1736K rodata, 420K init, 5572K bss, 36668K reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffe1000 - 0xfffff000   ( 120 kB)
[    0.000000]     vmalloc : 0xd47fe000 - 0xfffdf000   ( 695 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3ffe000   ( 319 MB)
[    0.000000]       .init : 0xc09aa000 - 0xc0a13000   ( 420 kB)
[    0.000000]       .data : 0xc065a6e8 - 0xc09a9280   (3386 kB)
[    0.000000]       .text : 0xc0200000 - 0xc065a6e8   (4457 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] CPU 0 irqstacks, hard=d240a000 soft=d240c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 3.12.0-05711-g4788e5b (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #11 PREEMPT Fri Jul 25 18:52:39 CST 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000fdb00-0x000fdb0f] mapped at [c00fdb00]
[    0.000000]   mpc: fdb10-fdbf0
[    0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff]
[    0.000000]  [mem 0x13a00000-0x13bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff]
[    0.000000]  [mem 0x10000000-0x139fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x0fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff]
[    0.000000]  [mem 0x13c00000-0x13dfffff] page 2M
[    0.000000]  [mem 0x13e00000-0x13ffdfff] page 4k
[    0.000000] BRK [0x00f8f000, 0x00f8ffff] PGTABLE
[    0.000000] cma: CMA: reserved 16 MiB at 12c00000
[    0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff]
[    0.000000] ACPI: RSDP 000fd9a0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 13ffe4b0 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 13ffff80 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 13ffe4f0 0011A9 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 13ffff40 000040
[    0.000000] ACPI: SSDT 13fff800 000735 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 13fff6e0 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 13fff6a0 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13ffe000
[    0.000000]   low ram: 0 - 13ffe000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13ffd001, boot clock
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x13ffdfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x13ffdfff]
[    0.000000] On node 0 totalpages: 81820
[    0.000000] free_area_init_node: node 0, pgdat c09a3960, node_mem_map d2980020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77822 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: fdb10-fdbf0
[    0.000000] MPTABLE: OEM ID: BOCHSCPU
[    0.000000] MPTABLE: Product ID: 0.1         
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 1
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 827d80
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81180
[    0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic  prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:4788e5b4b2338f85fa42a712a182d8afd65d7c58:bisect-linux-9/.vmlinuz-4788e5b4b2338f85fa42a712a182d8afd65d7c58-20140725185250-1-kbuild branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58/vmlinuz-3.12.0-05711-g4788e5b drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Memory: 290612K/327280K available (4456K kernel code, 1644K rwdata, 1736K rodata, 420K init, 5572K bss, 36668K reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffe1000 - 0xfffff000   ( 120 kB)
[    0.000000]     vmalloc : 0xd47fe000 - 0xfffdf000   ( 695 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3ffe000   ( 319 MB)
[    0.000000]       .init : 0xc09aa000 - 0xc0a13000   ( 420 kB)
[    0.000000]       .data : 0xc065a6e8 - 0xc09a9280   (3386 kB)
[    0.000000]       .text : 0xc0200000 - 0xc065a6e8   (4457 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] CPU 0 irqstacks, hard=d240a000 soft=d240c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3823 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.332 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 5386.66 BogoMIPS (lpj=10773328)
[    0.008007] pid_max: default: 32768 minimum: 301
[    0.009221] Security Framework initialized
[    0.010279] Yama: becoming mindful.
[    0.011292] Mount-cache hash table entries: 512
[    0.012837] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.012837] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.012837] tlb_flushall_shift: 6
[    0.016007] CPU: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01)
[    0.022461] ACPI: Core revision 20130927
[    0.025672] ACPI: All ACPI Tables successfully acquired
[    0.027052] ACPI: setting ELCR to 0200 (from 0c00)
[    0.028441] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[    0.032816] Getting VERSION: 1050014
[    0.033819] Getting VERSION: 1050014
[    0.034817] Getting ID: 0
[    0.035678] Getting ID: f000000
[    0.036025] Getting LVT0: 8700
[    0.036946] Getting LVT1: 8400
[    0.040093] enabled ExtINT on CPU#0
[    0.041148] TSC deadline timer enabled
[    0.042805] EVM: security.capability
[    0.044000] regulator-dummy: no parameters
[    0.044349] NET: Registered protocol family 16
[    0.045946] cpuidle: using governor ladder
[    0.047011] cpuidle: using governor menu
[    0.048324] ACPI: bus type PCI registered
[    0.049586] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.051469] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0
[    0.052009] PCI: Using configuration type 1 for base access
[    0.056509] bio: create slab <bio-0> at 0
[    0.057954] ACPI: Added _OSI(Module Device)
[    0.059032] ACPI: Added _OSI(Processor Device)
[    0.060015] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.064021] ACPI: Added _OSI(Processor Aggregator Device)
[    0.076253] ACPI: Interpreter enabled
[    0.077283] ACPI: (supports S0 S5)
[    0.078237] ACPI: Using PIC for interrupt routing
[    0.079421] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.091897] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.092020] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.093333] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.095244] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.096156] PCI host bridge to bus 0000:00
[    0.097232] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.098501] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.099870] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.100009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.101556] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.103164] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.104739] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.106948] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.110988] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.113638] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.115427] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.116022] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.118068] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.120762] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.123799] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[    0.130953] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.132725] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.135207] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[    0.137108] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.143843] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.144499] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.146455] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.151828] pci_bus 0000:00: on NUMA node 0
[    0.153621] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.155606] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.157217] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.159255] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.161119] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.163338] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.164025] ACPI: \_SB_.PCI0: notify handler is installed
[    0.165493] Found 1 acpi root devices
[    0.166907] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.168010] vgaarb: loaded
[    0.168861] vgaarb: bridge control possible 0000:00:02.0
[    0.170468] SCSI subsystem initialized
[    0.171571] pps_core: LinuxPPS API ver. 1 registered
[    0.172007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.174201] PTP clock support registered
[    0.175318] PCI: Using ACPI for IRQ routing
[    0.176011] PCI: pci_cache_line_size set to 64 bytes
[    0.177405] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.178808] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[    0.180598] Bluetooth: Core ver 2.17
[    0.181653] NET: Registered protocol family 31
[    0.182805] Bluetooth: HCI device and connection manager initialized
[    0.184031] Bluetooth: HCI socket layer initialized
[    0.185216] Bluetooth: L2CAP socket layer initialized
[    0.186430] Bluetooth: SCO socket layer initialized
[    0.187631] NET: Registered protocol family 8
[    0.188008] NET: Registered protocol family 20
[    0.189548] Switched to clocksource kvm-clock
[    0.191005] FS-Cache: Loaded
[    0.191929] pnp: PnP ACPI init
[    0.192000] ACPI: bus type PNP registered
[    0.192591] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.194157] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.195314] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.197317] pnp 00:03: [dma 2]
[    0.198301] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.199900] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.201559] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.203101] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.204989] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.206695] pnp: PnP ACPI: found 8 devices
[    0.207757] ACPI: bus type PNP unregistered
[    0.208857] PnPBIOS: Disabled
[    0.552779] mdacon: MDA with 8K of memory detected.
[    0.552878] Console: switching consoles 13-16 to MDA-2
[    0.590231] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.591608] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.592989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.594387] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.595873] NET: Registered protocol family 2
[    0.597636] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.599217] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
[    0.601304] TCP: Hash tables configured (established 4096 bind 4096)
[    0.602779] TCP: reno registered
[    0.603706] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    0.605135] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    0.606847] NET: Registered protocol family 1
[    0.607981] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.609379] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.610711] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.612145] pci 0000:00:02.0: Boot video device
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.736012] Oops: 0000 [#1] PREEMPT 
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left
[    0.798045] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    0.798045] 
[    0.800575] Rebooting in 10 seconds..

Elapsed time: 5
qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58/vmlinuz-3.12.0-05711-g4788e5b -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:4788e5b4b2338f85fa42a712a182d8afd65d7c58:bisect-linux-9/.vmlinuz-4788e5b4b2338f85fa42a712a182d8afd65d7c58-20140725185250-1-kbuild branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58/vmlinuz-3.12.0-05711-g4788e5b drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 320 -smp 1 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-kbuild-7 -serial file:/dev/shm/kboot/serial-yocto-kbuild-7 -daemonize -display none -monitor null

HEAD is now at 1a58d99... Add linux-next specific files for 20140724
git checkout 9a3c4145af32125c5ee39c0272662b47307a8323
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:9a3c4145af32125c5ee39c0272662b47307a8323:bisect-linux-9

2014-07-25-12:22:50 9a3c4145af32125c5ee39c0272662b47307a8323 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-9a3c4145af32125c5ee39c0272662b47307a8323 Check for kernel in /kernel/i386-randconfig-ib1-07251153/9a3c4145af32125c5ee39c0272662b47307a8323
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-9a3c4145af32125c5ee39c0272662b47307a8323 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-9a3c4145af32125c5ee39c0272662b47307a8323
kernel: /kernel/i386-randconfig-ib1-07251153/9a3c4145af32125c5ee39c0272662b47307a8323/vmlinuz-3.16.0-rc6

2014-07-25-12:27:50 detecting boot state .. 2 4 135 173 210 299................ 300 SUCCESS

bisect: good commit 9a3c4145af32125c5ee39c0272662b47307a8323
git bisect start 1a58d9909611972fd1c081bb04a9f7dc2571e612 9a3c4145af32125c5ee39c0272662b47307a8323 --
/c/kernel-tests/linear-bisect: ["-b", "1a58d9909611972fd1c081bb04a9f7dc2571e612", "-g", "9a3c4145af32125c5ee39c0272662b47307a8323", "/c/kernel-tests/bisect-test-boot-failure.sh", "/c/boot-bisect/linux-9/obj-bisect"]
Bisecting: 8702 revisions left to test after this (roughly 14 steps)
[c838e9a09479b2b2d89150ef90dc3eac88f06b81] Merge remote-tracking branch 'thermal/next'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:c838e9a09479b2b2d89150ef90dc3eac88f06b81:bisect-linux-9

2014-07-25-12:40:24 c838e9a09479b2b2d89150ef90dc3eac88f06b81 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-c838e9a09479b2b2d89150ef90dc3eac88f06b81 Check for kernel in /kernel/i386-randconfig-ib1-07251153/c838e9a09479b2b2d89150ef90dc3eac88f06b81 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-c838e9a09479b2b2d89150ef90dc3eac88f06b81
kernel: /kernel/i386-randconfig-ib1-07251153/c838e9a09479b2b2d89150ef90dc3eac88f06b81/vmlinuz-3.16.0-rc6-02207-gc838e9a

2014-07-25-12:42:24 detecting boot state 28 TEST FAILURE

[    0.986630] PCI: CLS 0 bytes, default 64
[    0.988055] Unpacking initramfs...
[    0.991948] Initramfs unpacking failed: junk in compressed archive
[    0.994273] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.994678] IP: [<d1c578d1>] validate_chain.isra.37+0xc5/0x10e5
[    0.994678] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.994678] Oops: 0000 [#1] PREEMPT 
[    0.994678] Modules linked in:
[    0.994678] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-02207-gc838e9a #1
[    0.994678] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.994678] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.994678] EIP: 0060:[<d1c578d1>] EFLAGS: 00010082 CPU: 0
[    0.994678] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.994678] EAX: 00000000 EBX: 00000085 ECX: 00000000 EDX: fffffffc
[    0.994678] ESI: d044a4f8 EDI: d285cc08 EBP: d044ddd8 ESP: d044dd74
[    0.994678]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.994678] CR0: 8005003b CR2: 0000000c CR3: 1245c000 CR4: 000006b0
[    0.994678] Stack:
[    0.994678]  00000085 d044dd80 d1c23e9e d044dd88 d1c07d35 d044ddb4 d28a1fb0 d044a4f8
[    0.994678]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000085
[    0.994678]  d044ddd0 d1c4d588 3b4328d8 00000000 00000000 d044a010 00000085 d044a010
[    0.994678] Call Trace:
[    0.994678]  [<d1c23e9e>] ? kvm_clock_read+0x13/0x24
[    0.994678]  [<d1c07d35>] ? sched_clock+0x8/0xb
[    0.994678]  [<d1c4d588>] ? sched_clock_cpu+0xb1/0xd0
[    0.994678]  [<d1c59852>] __lock_acquire+0x350/0xaa5
[    0.994678]  [<d1c5a6f7>] lock_acquire+0x77/0x92
[    0.994678]  [<d1c8e648>] ? adjust_managed_page_count+0x13/0x4a
[    0.994678]  [<d208748c>] _raw_spin_lock+0x3c/0x69
[    0.994678]  [<d1c8e648>] ? adjust_managed_page_count+0x13/0x4a
[    0.994678]  [<d1c8e648>] adjust_managed_page_count+0x13/0x4a
[    0.994678]  [<d1c91a82>] free_reserved_area+0x6b/0xdc
[    0.994678]  [<d1c27791>] ? set_memory_rw+0x48/0x4a
[    0.994678]  [<d1c24be0>] free_init_pages+0x5b/0x7e
[    0.994678]  [<d23f0ce6>] ? maybe_link.part.2+0xe4/0xe4
[    0.994678]  [<d23f0ce6>] ? maybe_link.part.2+0xe4/0xe4
[    0.994678]  [<d23fd86c>] free_initrd_mem+0x26/0x2a
[    0.994678]  [<d23f0dbd>] populate_rootfs+0xd7/0xf9
[    0.994678]  [<d23f0ce6>] ? maybe_link.part.2+0xe4/0xe4
[    0.994678]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.994678]  [<d23f0ce6>] ? maybe_link.part.2+0xe4/0xe4
[    0.994678]  [<d1c4319b>] ? parameq+0x13/0x5e
[    0.994678]  [<d23ef59b>] ? repair_env_string+0x12/0x51
[    0.994678]  [<d1c433ce>] ? parse_args+0x1e8/0x318
[    0.994678]  [<d1c3d91a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.994678]  [<d23efce7>] kernel_init_freeable+0xde/0x178
[    0.994678]  [<d23ef589>] ? initcall_blacklist+0x81/0x81
[    0.994678]  [<d207c010>] kernel_init+0xb/0xc7
[    0.994678]  [<d1c4ba8e>] ? schedule_tail+0xc/0x3a
[    0.994678]  [<d2088240>] ret_from_kernel_thread+0x20/0x30
[    0.994678]  [<d207c005>] ? rest_init+0xb5/0xb5
[    0.994678] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.994678] EIP: [<d1c578d1>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.994678] CR2: 000000000000000c
[    0.994678] ---[ end trace 24763f3b250a24d6 ]---
[    0.994678] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/c838e9a09479b2b2d89150ef90dc3eac88f06b81/dmesg-quantal-ivb42-50:20140725124535:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/c838e9a09479b2b2d89150ef90dc3eac88f06b81/dmesg-quantal-ivb42-111:20140725124618:i386-randconfig-ib1-07251153::
26:2:4 all_good:bad:all_bad boots

Bisecting: 2212 revisions left to test after this (roughly 12 steps) [f675c94826190d4fb9dec0b52913f80754c2be6f] Merge remote-tracking branch 'm68k/for-next'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:f675c94826190d4fb9dec0b52913f80754c2be6f:bisect-linux-9

2014-07-25-12:43:17 f675c94826190d4fb9dec0b52913f80754c2be6f compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-f675c94826190d4fb9dec0b52913f80754c2be6f Check for kernel in /kernel/i386-randconfig-ib1-07251153/f675c94826190d4fb9dec0b52913f80754c2be6f waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-f675c94826190d4fb9dec0b52913f80754c2be6f
kernel: /kernel/i386-randconfig-ib1-07251153/f675c94826190d4fb9dec0b52913f80754c2be6f/vmlinuz-3.16.0-rc6-01186-gf675c94

2014-07-25-12:45:28 detecting boot state 40 75 104 130 155 182 205 221 TEST FAILURE

[    0.670348] PCI: CLS 0 bytes, default 64
[    0.671685] Unpacking initramfs...
[    0.675539] Initramfs unpacking failed: junk in compressed archive
[    0.678004] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.679756] IP: [<d1c57931>] validate_chain.isra.37+0xc5/0x10e5
[    0.681077] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.681077] Oops: 0000 [#1] PREEMPT 
[    0.681077] Modules linked in:
[    0.681077] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-01186-gf675c94 #2
[    0.681077] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.681077] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.681077] EIP: 0060:[<d1c57931>] EFLAGS: 00010086 CPU: 0
[    0.681077] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.681077] EAX: 00000000 EBX: 00000084 ECX: 00000000 EDX: fffffffc
[    0.681077] ESI: d044a4f8 EDI: d2874330 EBP: d044ddd8 ESP: d044dd74
[    0.681077]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.681077] CR0: 8005003b CR2: 0000000c CR3: 1245b000 CR4: 000006b0
[    0.681077] Stack:
[    0.681077]  00000084 d044dd80 d1c23efe d044dd88 d1c07d35 d044ddb4 d28a0e80 d044a4f8
[    0.681077]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000084
[    0.681077]  d044ddd0 d1c4d5e8 2869522e 00000000 00000000 d044a010 00000084 d044a010
[    0.681077] Call Trace:
[    0.681077]  [<d1c23efe>] ? kvm_clock_read+0x13/0x24
[    0.681077]  [<d1c07d35>] ? sched_clock+0x8/0xb
[    0.681077]  [<d1c4d5e8>] ? sched_clock_cpu+0xb1/0xd0
[    0.681077]  [<d1c598b2>] __lock_acquire+0x350/0xaa5
[    0.681077]  [<d1c5a757>] lock_acquire+0x77/0x92
[    0.681077]  [<d1c8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.681077]  [<d208678c>] _raw_spin_lock+0x3c/0x69
[    0.681077]  [<d1c8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.681077]  [<d1c8e6a8>] adjust_managed_page_count+0x13/0x4a
[    0.681077]  [<d1c91ae2>] free_reserved_area+0x6b/0xdc
[    0.681077]  [<d1c277f1>] ? set_memory_rw+0x48/0x4a
[    0.681077]  [<d1c24c40>] free_init_pages+0x5b/0x7e
[    0.681077]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681077]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681077]  [<d23fb86c>] free_initrd_mem+0x26/0x2a
[    0.681077]  [<d23eedbd>] populate_rootfs+0xd7/0xf9
[    0.681077]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681077]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.681077]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681077]  [<d1c59218>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.681077]  [<d1c431fb>] ? parameq+0x13/0x5e
[    0.681077]  [<d23ed59b>] ? repair_env_string+0x12/0x51
[    0.681077]  [<d1c4342e>] ? parse_args+0x1e8/0x318
[    0.681077]  [<d1c3d97a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.681077]  [<d23edce7>] kernel_init_freeable+0xde/0x178
[    0.681077]  [<d23ed589>] ? initcall_blacklist+0x81/0x81
[    0.681077]  [<d207ad30>] kernel_init+0xb/0xc7
[    0.681077]  [<d1c4baee>] ? schedule_tail+0xc/0x3a
[    0.681077]  [<d2087540>] ret_from_kernel_thread+0x20/0x30
[    0.681077]  [<d207ad25>] ? rest_init+0xb5/0xb5
[    0.681077] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.681077] EIP: [<d1c57931>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.681077] CR2: 000000000000000c
[    0.681077] ---[ end trace 17f383765e2996ac ]---
[    0.681077] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/f675c94826190d4fb9dec0b52913f80754c2be6f/dmesg-quantal-ivb43-14:20140725125608:i386-randconfig-ib1-07251153::
218:1:5 all_good:bad:all_bad boots
2014-07-25 12:49:29 REPEAT COUNT: 300 # /c/boot-bisect/linux-9/obj-bisect/.repeat

Bisecting: 1191 revisions left to test after this (roughly 11 steps) [ea471b3f8592187c1930b2e0d8bf29163c13db56] Merge remote-tracking branch 'sound-current/for-linus'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:ea471b3f8592187c1930b2e0d8bf29163c13db56:bisect-linux-9

2014-07-25-12:49:31 ea471b3f8592187c1930b2e0d8bf29163c13db56 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-ea471b3f8592187c1930b2e0d8bf29163c13db56 Check for kernel in /kernel/i386-randconfig-ib1-07251153/ea471b3f8592187c1930b2e0d8bf29163c13db56 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-ea471b3f8592187c1930b2e0d8bf29163c13db56
kernel: /kernel/i386-randconfig-ib1-07251153/ea471b3f8592187c1930b2e0d8bf29163c13db56/vmlinuz-3.16.0-rc6-00120-gea471b3

2014-07-25-12:51:31 detecting boot state 8 29 46 60 80 100 114 129 165 197 206 218 250 290 292........ 293 294. 297.. 298.. 300 SUCCESS

Bisecting: 1071 revisions left to test after this (roughly 11 steps) [3f5412487c378c843d179f8356b40ba6ff341930] Merge remote-tracking branch 'berlin/berlin/for-next'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:3f5412487c378c843d179f8356b40ba6ff341930:bisect-linux-9

2014-07-25-13:08:05 3f5412487c378c843d179f8356b40ba6ff341930 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-3f5412487c378c843d179f8356b40ba6ff341930 Check for kernel in /kernel/i386-randconfig-ib1-07251153/3f5412487c378c843d179f8356b40ba6ff341930 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-3f5412487c378c843d179f8356b40ba6ff341930
kernel: /kernel/i386-randconfig-ib1-07251153/3f5412487c378c843d179f8356b40ba6ff341930/vmlinuz-3.16.0-rc6-00974-g3f54124

2014-07-25-13:10:05 detecting boot state 3 148 297............... 299 300 SUCCESS

Bisecting: 212 revisions left to test after this (roughly 8 steps)
[7d84331f08a5746cefd124337686245b00c825b4] Merge remote-tracking branch 'samsung/for-next'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:7d84331f08a5746cefd124337686245b00c825b4:bisect-linux-9

2014-07-25-13:20:46 7d84331f08a5746cefd124337686245b00c825b4 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-7d84331f08a5746cefd124337686245b00c825b4 Check for kernel in /kernel/i386-randconfig-ib1-07251153/7d84331f08a5746cefd124337686245b00c825b4 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-7d84331f08a5746cefd124337686245b00c825b4
kernel: /kernel/i386-randconfig-ib1-07251153/7d84331f08a5746cefd124337686245b00c825b4/vmlinuz-3.16.0-rc6-01113-g7d84331

2014-07-25-13:22:46 detecting boot state . 11 23 33 52 63 92 TEST FAILURE

[    0.544132] PCI: CLS 0 bytes, default 64
[    0.545510] Unpacking initramfs...
[    0.546500] Initramfs unpacking failed: junk in compressed archive
[    0.549851] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.551622] IP: [<d1e57931>] validate_chain.isra.37+0xc5/0x10e5
[    0.552187] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.552187] Oops: 0000 [#1] PREEMPT 
[    0.552187] Modules linked in:
[    0.552187] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-01113-g7d84331 #1
[    0.552187] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.552187] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.552187] EIP: 0060:[<d1e57931>] EFLAGS: 00010086 CPU: 0
[    0.552187] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.552187] EAX: 00000000 EBX: 00000084 ECX: 00000000 EDX: fffffffc
[    0.552187] ESI: d044a4f8 EDI: d2a74330 EBP: d044ddd8 ESP: d044dd74
[    0.552187]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.552187] CR0: 8005003b CR2: 0000000c CR3: 1265b000 CR4: 000006b0
[    0.552187] Stack:
[    0.552187]  00000084 d044dd80 d1e23efe d044dd88 d1e07d35 d044ddb4 d2aa0e80 d044a4f8
[    0.552187]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000084
[    0.552187]  d044ddd0 d1e4d5e8 20c5d4ef 00000000 00000000 d044a010 00000084 d044a010
[    0.552187] Call Trace:
[    0.552187]  [<d1e23efe>] ? kvm_clock_read+0x13/0x24
[    0.552187]  [<d1e07d35>] ? sched_clock+0x8/0xb
[    0.552187]  [<d1e4d5e8>] ? sched_clock_cpu+0xb1/0xd0
[    0.552187]  [<d1e598b2>] __lock_acquire+0x350/0xaa5
[    0.552187]  [<d1e5a757>] lock_acquire+0x77/0x92
[    0.552187]  [<d1e8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.552187]  [<d228678c>] _raw_spin_lock+0x3c/0x69
[    0.552187]  [<d1e8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.552187]  [<d1e8e6a8>] adjust_managed_page_count+0x13/0x4a
[    0.552187]  [<d1e91ae2>] free_reserved_area+0x6b/0xdc
[    0.552187]  [<d1e277f1>] ? set_memory_rw+0x48/0x4a
[    0.552187]  [<d1e24c40>] free_init_pages+0x5b/0x7e
[    0.552187]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.552187]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.552187]  [<d25fb86c>] free_initrd_mem+0x26/0x2a
[    0.552187]  [<d25eedbd>] populate_rootfs+0xd7/0xf9
[    0.552187]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.552187]  [<d1e00426>] do_one_initcall+0x7f/0x1b9
[    0.552187]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.552187]  [<d1e59218>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.552187]  [<d1e431fb>] ? parameq+0x13/0x5e
[    0.552187]  [<d25ed59b>] ? repair_env_string+0x12/0x51
[    0.552187]  [<d1e4342e>] ? parse_args+0x1e8/0x318
[    0.552187]  [<d1e3d97a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.552187]  [<d25edce7>] kernel_init_freeable+0xde/0x178
[    0.552187]  [<d25ed589>] ? initcall_blacklist+0x81/0x81
[    0.552187]  [<d227ad30>] kernel_init+0xb/0xc7
[    0.552187]  [<d1e4baee>] ? schedule_tail+0xc/0x3a
[    0.552187]  [<d2287540>] ret_from_kernel_thread+0x20/0x30
[    0.552187]  [<d227ad25>] ? rest_init+0xb5/0xb5
[    0.552187] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.552187] EIP: [<d1e57931>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.552187] CR2: 000000000000000c
[    0.552187] ---[ end trace d3dc18e6e0df7713 ]---
[    0.552187] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/7d84331f08a5746cefd124337686245b00c825b4/dmesg-quantal-ivb42-6:20140725133012:i386-randconfig-ib1-07251153::
92:1:1 all_good:bad:all_bad boots
2014-07-25 13:26:18 REPEAT COUNT: 300 # /c/boot-bisect/linux-9/obj-bisect/.repeat

Bisecting: 139 revisions left to test after this (roughly 8 steps)
[cb6b8089b8ff9e5b8ba88a14588682914bffffdf] Merge remote-tracking branch 'mvebu/for-next'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:cb6b8089b8ff9e5b8ba88a14588682914bffffdf:bisect-linux-9

2014-07-25-13:26:21 cb6b8089b8ff9e5b8ba88a14588682914bffffdf compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-cb6b8089b8ff9e5b8ba88a14588682914bffffdf Check for kernel in /kernel/i386-randconfig-ib1-07251153/cb6b8089b8ff9e5b8ba88a14588682914bffffdf waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-cb6b8089b8ff9e5b8ba88a14588682914bffffdf
kernel: /kernel/i386-randconfig-ib1-07251153/cb6b8089b8ff9e5b8ba88a14588682914bffffdf/vmlinuz-3.16.0-rc6-01014-gcb6b808

2014-07-25-13:28:26 detecting boot state 9 TEST FAILURE

[    0.673171] PCI: CLS 0 bytes, default 64
[    0.674642] Unpacking initramfs...
[    0.675736] Initramfs unpacking failed: junk in compressed archive
[    0.679341] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.681242] IP: [<d1e57931>] validate_chain.isra.37+0xc5/0x10e5
[    0.681293] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.681293] Oops: 0000 [#1] PREEMPT 
[    0.681293] Modules linked in:
[    0.681293] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-01014-gcb6b808 #2
[    0.681293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.681293] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.681293] EIP: 0060:[<d1e57931>] EFLAGS: 00010086 CPU: 0
[    0.681293] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.681293] EAX: 00000000 EBX: 00000084 ECX: 00000000 EDX: fffffffc
[    0.681293] ESI: d044a4f8 EDI: d2a74330 EBP: d044ddd8 ESP: d044dd74
[    0.681293]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.681293] CR0: 8005003b CR2: 0000000c CR3: 1265b000 CR4: 000006b0
[    0.681293] Stack:
[    0.681293]  00000084 d044dd80 d1e23efe d044dd88 d1e07d35 d044ddb4 d2aa0e80 d044a4f8
[    0.681293]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000084
[    0.681293]  d044ddd0 d1e4d5e8 287da3d8 00000000 00000000 d044a010 00000084 d044a010
[    0.681293] Call Trace:
[    0.681293]  [<d1e23efe>] ? kvm_clock_read+0x13/0x24
[    0.681293]  [<d1e07d35>] ? sched_clock+0x8/0xb
[    0.681293]  [<d1e4d5e8>] ? sched_clock_cpu+0xb1/0xd0
[    0.681293]  [<d1e598b2>] __lock_acquire+0x350/0xaa5
[    0.681293]  [<d1e5a757>] lock_acquire+0x77/0x92
[    0.681293]  [<d1e8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.681293]  [<d228678c>] _raw_spin_lock+0x3c/0x69
[    0.681293]  [<d1e8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.681293]  [<d1e8e6a8>] adjust_managed_page_count+0x13/0x4a
[    0.681293]  [<d1e91ae2>] free_reserved_area+0x6b/0xdc
[    0.681293]  [<d1e277f1>] ? set_memory_rw+0x48/0x4a
[    0.681293]  [<d1e24c40>] free_init_pages+0x5b/0x7e
[    0.681293]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681293]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681293]  [<d25fb86c>] free_initrd_mem+0x26/0x2a
[    0.681293]  [<d25eedbd>] populate_rootfs+0xd7/0xf9
[    0.681293]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681293]  [<d1e00426>] do_one_initcall+0x7f/0x1b9
[    0.681293]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.681293]  [<d1e59218>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.681293]  [<d1e431fb>] ? parameq+0x13/0x5e
[    0.681293]  [<d25ed59b>] ? repair_env_string+0x12/0x51
[    0.681293]  [<d1e4342e>] ? parse_args+0x1e8/0x318
[    0.681293]  [<d1e3d97a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.681293]  [<d25edce7>] kernel_init_freeable+0xde/0x178
[    0.681293]  [<d25ed589>] ? initcall_blacklist+0x81/0x81
[    0.681293]  [<d227ad30>] kernel_init+0xb/0xc7
[    0.681293]  [<d1e4baee>] ? schedule_tail+0xc/0x3a
[    0.681293]  [<d2287540>] ret_from_kernel_thread+0x20/0x30
[    0.681293]  [<d227ad25>] ? rest_init+0xb5/0xb5
[    0.681293] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.681293] EIP: [<d1e57931>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.681293] CR2: 000000000000000c
[    0.681293] ---[ end trace 762c7261731566a0 ]---
[    0.681293] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/cb6b8089b8ff9e5b8ba88a14588682914bffffdf/dmesg-quantal-ivb42-97:20140725133200:i386-randconfig-ib1-07251153::
9:1:1 all_good:bad:all_bad boots

Bisecting: 40 revisions left to test after this (roughly 6 steps)
[990d03859a2e10b2aa112de97cd2a43c7014c922] Merge remote-tracking branch 'ep93xx/ep93xx-for-next'
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:990d03859a2e10b2aa112de97cd2a43c7014c922:bisect-linux-9

2014-07-25-13:28:59 990d03859a2e10b2aa112de97cd2a43c7014c922 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-990d03859a2e10b2aa112de97cd2a43c7014c922 Check for kernel in /kernel/i386-randconfig-ib1-07251153/990d03859a2e10b2aa112de97cd2a43c7014c922 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-990d03859a2e10b2aa112de97cd2a43c7014c922
kernel: /kernel/i386-randconfig-ib1-07251153/990d03859a2e10b2aa112de97cd2a43c7014c922/vmlinuz-3.16.0-rc6-00989-g990d038

2014-07-25-13:32:59 detecting boot state . 12 29 46 66 83 94 111 TEST FAILURE

[    0.927794] PCI: CLS 0 bytes, default 64
[    0.930788] Unpacking initramfs...
[    0.950075] Initramfs unpacking failed: junk in compressed archive
[    0.952299] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.953716] IP: [<d1c57931>] validate_chain.isra.37+0xc5/0x10e5
[    0.953716] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.953716] Oops: 0000 [#1] PREEMPT 
[    0.953716] Modules linked in:
[    0.953716] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-00989-g990d038 #3
[    0.953716] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.953716] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.953716] EIP: 0060:[<d1c57931>] EFLAGS: 00010086 CPU: 0
[    0.953716] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.953716] EAX: 00000000 EBX: 00000084 ECX: 00000000 EDX: fffffffc
[    0.953716] ESI: d044a4f8 EDI: d2874330 EBP: d044ddd8 ESP: d044dd74
[    0.953716]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.953716] CR0: 8005003b CR2: 0000000c CR3: 1245b000 CR4: 000006b0
[    0.953716] Stack:
[    0.953716]  00000084 d044dd80 d1c23efe d044dd88 d1c07d35 d044ddb4 d28a0e80 d044a4f8
[    0.953716]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000084
[    0.953716]  d044ddd0 d1c4d5e8 38c2b941 00000000 00000000 d044a010 00000084 d044a010
[    0.953716] Call Trace:
[    0.953716]  [<d1c23efe>] ? kvm_clock_read+0x13/0x24
[    0.953716]  [<d1c07d35>] ? sched_clock+0x8/0xb
[    0.953716]  [<d1c4d5e8>] ? sched_clock_cpu+0xb1/0xd0
[    0.953716]  [<d1c598b2>] __lock_acquire+0x350/0xaa5
[    0.953716]  [<d1c5a757>] lock_acquire+0x77/0x92
[    0.953716]  [<d1c8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.953716]  [<d208678c>] _raw_spin_lock+0x3c/0x69
[    0.953716]  [<d1c8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.953716]  [<d1c8e6a8>] adjust_managed_page_count+0x13/0x4a
[    0.953716]  [<d1c91ae2>] free_reserved_area+0x6b/0xdc
[    0.953716]  [<d1c277f1>] ? set_memory_rw+0x48/0x4a
[    0.953716]  [<d1c24c40>] free_init_pages+0x5b/0x7e
[    0.953716]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.953716]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.953716]  [<d23fb86c>] free_initrd_mem+0x26/0x2a
[    0.953716]  [<d23eedbd>] populate_rootfs+0xd7/0xf9
[    0.953716]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.953716]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.953716]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.953716]  [<d1c59218>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.953716]  [<d1c431fb>] ? parameq+0x13/0x5e
[    0.953716]  [<d23ed59b>] ? repair_env_string+0x12/0x51
[    0.953716]  [<d1c4342e>] ? parse_args+0x1e8/0x318
[    0.953716]  [<d1c3d97a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.953716]  [<d23edce7>] kernel_init_freeable+0xde/0x178
[    0.953716]  [<d23ed589>] ? initcall_blacklist+0x81/0x81
[    0.953716]  [<d207ad30>] kernel_init+0xb/0xc7
[    0.953716]  [<d1c4baee>] ? schedule_tail+0xc/0x3a
[    0.953716]  [<d2087540>] ret_from_kernel_thread+0x20/0x30
[    0.953716]  [<d207ad25>] ? rest_init+0xb5/0xb5
[    0.953716] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.953716] EIP: [<d1c57931>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.953716] CR2: 000000000000000c
[    0.953716] ---[ end trace 2a062e2ecfb8e588 ]---
[    0.953716] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/990d03859a2e10b2aa112de97cd2a43c7014c922/dmesg-quantal-ivb42-75:20140725134053:i386-randconfig-ib1-07251153::
110:1:2 all_good:bad:all_bad boots
2014-07-25 13:37:00 REPEAT COUNT: 300 # /c/boot-bisect/linux-9/obj-bisect/.repeat

linear-bisect: bad branch may be remote-tracking branch 'ep93xx/ep93xx-for-next'
linear-bisect: handle over to git bisect
linear-bisect: git bisect start 990d03859a2e10b2aa112de97cd2a43c7014c922 3f5412487c378c843d179f8356b40ba6ff341930 -- Previous HEAD position was 990d038... Merge remote-tracking branch 'ep93xx/ep93xx-for-next'
HEAD is now at b4d3318... Merge remote-tracking branch 'crypto/master'
Bisecting: 7 revisions left to test after this (roughly 3 steps)
[1619af3e78b31de905107259100e8cbfb3d7abe0] Merge branch 'ep93xx-cleanup' into ep93xx-for-next
linear-bisect: git bisect run /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:1619af3e78b31de905107259100e8cbfb3d7abe0:bisect-linux-9

2014-07-25-13:37:15 1619af3e78b31de905107259100e8cbfb3d7abe0 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-1619af3e78b31de905107259100e8cbfb3d7abe0 Check for kernel in /kernel/i386-randconfig-ib1-07251153/1619af3e78b31de905107259100e8cbfb3d7abe0 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-1619af3e78b31de905107259100e8cbfb3d7abe0
kernel: /kernel/i386-randconfig-ib1-07251153/1619af3e78b31de905107259100e8cbfb3d7abe0/vmlinuz-3.9.0-rc1-00007-g1619af3

2014-07-25-13:39:15 detecting boot state . 12 15 22 40 64 85 96 118 161 184 207 239 261 283 295 300 SUCCESS

Bisecting: 3 revisions left to test after this (roughly 2 steps)
[9c59be78d1ee4a717ca2f85b54356f8fed7f439c] Merge branch 'ep93xx-devel' into ep93xx-for-next
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:9c59be78d1ee4a717ca2f85b54356f8fed7f439c:bisect-linux-9

2014-07-25-13:49:24 9c59be78d1ee4a717ca2f85b54356f8fed7f439c compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-9c59be78d1ee4a717ca2f85b54356f8fed7f439c Check for kernel in /kernel/i386-randconfig-ib1-07251153/9c59be78d1ee4a717ca2f85b54356f8fed7f439c waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-9c59be78d1ee4a717ca2f85b54356f8fed7f439c
kernel: /kernel/i386-randconfig-ib1-07251153/9c59be78d1ee4a717ca2f85b54356f8fed7f439c/vmlinuz-3.11.0-rc1-00011-g9c59be7

2014-07-25-13:51:33 detecting boot state .. 27 38 60 136 149 216 300 SUCCESS

Bisecting: 2 revisions left to test after this (roughly 1 step)
[6868a891d0b45e283b0a20ef7f7f940ec656472c] Merge branch 'ep93xx-fixes' into ep93xx-for-next
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:6868a891d0b45e283b0a20ef7f7f940ec656472c:bisect-linux-9

2014-07-25-13:56:30 6868a891d0b45e283b0a20ef7f7f940ec656472c compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-6868a891d0b45e283b0a20ef7f7f940ec656472c Check for kernel in /kernel/i386-randconfig-ib1-07251153/6868a891d0b45e283b0a20ef7f7f940ec656472c waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-6868a891d0b45e283b0a20ef7f7f940ec656472c
kernel: /kernel/i386-randconfig-ib1-07251153/6868a891d0b45e283b0a20ef7f7f940ec656472c/vmlinuz-3.11.0-rc1-00013-g6868a89

2014-07-25-13:58:30 detecting boot state 1 126 300 SUCCESS

Bisecting: 0 revisions left to test after this (roughly 1 step)
[bfb0709fd17b13498d99592bbe12c91130e35a55] Merge branch 'ep93xx-fixes' into ep93xx-for-next
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:bfb0709fd17b13498d99592bbe12c91130e35a55:bisect-linux-9

2014-07-25-14:00:02 bfb0709fd17b13498d99592bbe12c91130e35a55 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-bfb0709fd17b13498d99592bbe12c91130e35a55 Check for kernel in /kernel/i386-randconfig-ib1-07251153/bfb0709fd17b13498d99592bbe12c91130e35a55
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-bfb0709fd17b13498d99592bbe12c91130e35a55 waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/i386-randconfig-ib1-07251153-bfb0709fd17b13498d99592bbe12c91130e35a55
kernel: /kernel/i386-randconfig-ib1-07251153/bfb0709fd17b13498d99592bbe12c91130e35a55/vmlinuz-3.11.0-rc1-00015-gbfb0709

2014-07-25-14:11:02 detecting boot state .. 155 211 294 300 SUCCESS

990d03859a2e10b2aa112de97cd2a43c7014c922 is the first bad commit
bisect run success
Previous HEAD position was bfb0709... Merge branch 'ep93xx-fixes' into ep93xx-for-next
HEAD is now at 3f54124... Merge remote-tracking branch 'berlin/berlin/for-next'
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:3f5412487c378c843d179f8356b40ba6ff341930:bisect-linux-9

2014-07-25-14:14:08 3f5412487c378c843d179f8356b40ba6ff341930 reuse /kernel/i386-randconfig-ib1-07251153/3f5412487c378c843d179f8356b40ba6ff341930/vmlinuz-3.16.0-rc6-00974-g3f54124

2014-07-25-14:14:09 detecting boot state 1. 83 TEST FAILURE

[    0.664818] PCI: CLS 0 bytes, default 64
[    0.666176] Unpacking initramfs...
[    0.667172] Initramfs unpacking failed: junk in compressed archive
[    0.670478] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.672275] IP: [<d1e57931>] validate_chain.isra.37+0xc5/0x10e5
[    0.672616] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.672616] Oops: 0000 [#1] PREEMPT 
[    0.672616] Modules linked in:
[    0.672616] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-00974-g3f54124 #1
[    0.672616] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.672616] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.672616] EIP: 0060:[<d1e57931>] EFLAGS: 00010086 CPU: 0
[    0.672616] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.672616] EAX: 00000000 EBX: 00000084 ECX: 00000000 EDX: fffffffc
[    0.672616] ESI: d044a4f8 EDI: d2a74330 EBP: d044ddd8 ESP: d044dd74
[    0.672616]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.672616] CR0: 8005003b CR2: 0000000c CR3: 1265b000 CR4: 000006b0
[    0.672616] Stack:
[    0.672616]  00000084 d044dd80 d1e23efe d044dd88 d1e07d35 d044ddb4 d2aa0e80 d044a4f8
[    0.672616]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000084
[    0.672616]  d044ddd0 d1e4d5e8 27f676a6 00000000 00000000 d044a010 00000084 d044a010
[    0.672616] Call Trace:
[    0.672616]  [<d1e23efe>] ? kvm_clock_read+0x13/0x24
[    0.672616]  [<d1e07d35>] ? sched_clock+0x8/0xb
[    0.672616]  [<d1e4d5e8>] ? sched_clock_cpu+0xb1/0xd0
[    0.672616]  [<d1e598b2>] __lock_acquire+0x350/0xaa5
[    0.672616]  [<d1e5a757>] lock_acquire+0x77/0x92
[    0.672616]  [<d1e8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.672616]  [<d228678c>] _raw_spin_lock+0x3c/0x69
[    0.672616]  [<d1e8e6a8>] ? adjust_managed_page_count+0x13/0x4a
[    0.672616]  [<d1e8e6a8>] adjust_managed_page_count+0x13/0x4a
[    0.672616]  [<d1e91ae2>] free_reserved_area+0x6b/0xdc
[    0.672616]  [<d1e277f1>] ? set_memory_rw+0x48/0x4a
[    0.672616]  [<d1e24c40>] free_init_pages+0x5b/0x7e
[    0.672616]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.672616]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.672616]  [<d25fb86c>] free_initrd_mem+0x26/0x2a
[    0.672616]  [<d25eedbd>] populate_rootfs+0xd7/0xf9
[    0.672616]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.672616]  [<d1e00426>] do_one_initcall+0x7f/0x1b9
[    0.672616]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.672616]  [<d1e59218>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.672616]  [<d1e431fb>] ? parameq+0x13/0x5e
[    0.672616]  [<d25ed59b>] ? repair_env_string+0x12/0x51
[    0.672616]  [<d1e4342e>] ? parse_args+0x1e8/0x318
[    0.672616]  [<d1e3d97a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.672616]  [<d25edce7>] kernel_init_freeable+0xde/0x178
[    0.672616]  [<d25ed589>] ? initcall_blacklist+0x81/0x81
[    0.672616]  [<d227ad30>] kernel_init+0xb/0xc7
[    0.672616]  [<d1e4baee>] ? schedule_tail+0xc/0x3a
[    0.672616]  [<d2287540>] ret_from_kernel_thread+0x20/0x30
[    0.672616]  [<d227ad25>] ? rest_init+0xb5/0xb5
[    0.672616] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.672616] EIP: [<d1e57931>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.672616] CR2: 000000000000000c
[    0.672616] ---[ end trace 5eafaf51fd17f39f ]---
[    0.672616] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/3f5412487c378c843d179f8356b40ba6ff341930/dmesg-quantal-ivb42-121:20140725141923:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/3f5412487c378c843d179f8356b40ba6ff341930/dmesg-quantal-ivb42-62:20140725141923:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/3f5412487c378c843d179f8356b40ba6ff341930/dmesg-quantal-vp-31:20140725141607:i386-randconfig-ib1-07251153:3.16.0-rc6-00974-g3f54124:1 397:3:9 all_good:bad:all_bad boots

2014-07-25 14:15:51 bad bisect, retry with increased repeat count 900
Previous HEAD position was 3f54124... Merge remote-tracking branch 'berlin/berlin/for-next'
HEAD is now at 1a58d99... Add linux-next specific files for 20140724
git checkout 9a3c4145af32125c5ee39c0272662b47307a8323
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:9a3c4145af32125c5ee39c0272662b47307a8323:bisect-linux-9

2014-07-25-14:18:02 9a3c4145af32125c5ee39c0272662b47307a8323 reuse /kernel/i386-randconfig-ib1-07251153/9a3c4145af32125c5ee39c0272662b47307a8323/vmlinuz-3.16.0-rc6

2014-07-25-14:18:02 detecting boot state .. TEST FAILURE

[    1.245703] PCI: CLS 0 bytes, default 64
[    1.247300] Unpacking initramfs...
[    1.252612] Initramfs unpacking failed: junk in compressed archive
[    1.255022] BUG: MAX_LOCKDEP_KEYS too low!
[    1.256039] turning off the locking correctness validator.
[    1.259019] Please attach the output of /proc/lock_stat to the bug report
[    1.259019] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6 #1
[    1.259019] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    1.259019]  00000000 00000000 d040becc d22812c9 d040bf0c d1e59ff2 d1e07d25 d040bf04
[    1.259019]  d1e4d378 4ace1947 00000000 00000000 d2a92fc0 d266a08a 00000007 d040bf64
[    1.259019]  00000000 d044a010 d040bf64 00000000 d040bf3c d1e5a747 00000000 00000001
[    1.259019] Call Trace:
[    1.259019]  [<d22812c9>] dump_stack+0x16/0x18
[    1.259019]  [<d1e59ff2>] __lock_acquire+0xaa0/0xaa5
[    1.259019]  [<d1e07d25>] ? sched_clock+0x8/0xb
[    1.259019]  [<d1e4d378>] ? sched_clock_local.constprop.5+0x39/0x131
[    1.259019]  [<d1e5a747>] lock_acquire+0x77/0x92
[    1.259019]  [<d1e359df>] ? call_timer_fn+0x36/0xd2
[    1.259019]  [<d1e35a08>] call_timer_fn+0x5f/0xd2
[    1.259019]  [<d1e359df>] ? call_timer_fn+0x36/0xd2
[    1.259019]  [<d1e591bd>] ? trace_hardirqs_on_caller+0xa0/0x1af
[    1.259019]  [<d1e3599f>] ? init_timer_key+0x3d/0x3d
[    1.259019]  [<d1e36198>] run_timer_softirq+0x14b/0x1c0
[    1.259019]  [<d1e3599f>] ? init_timer_key+0x3d/0x3d
[    1.259019]  [<d1e30c52>] __do_softirq+0xd9/0x1f4
[    1.259019]  [<d1e30b79>] ? __tasklet_schedule+0x6e/0x6e
[    1.259019]  [<d1e03577>] do_softirq_own_stack+0x1c/0x22
[    1.259019]  <IRQ>  [<d1e30f8b>] irq_exit+0x53/0x55
[    1.259019]  [<d1e1f89f>] smp_apic_timer_interrupt+0x31/0x3a
[    1.259019]  [<d2287bf9>] apic_timer_interrupt+0x39/0x40
[    1.259019]  [<d228007b>] ? ext4_mb_discard_group_preallocations+0x30/0x33d
[    1.259019]  [<d1e800e0>] ? cpu_clock_event_read+0x8/0x43
[    1.259019]  [<d1e91afe>] ? free_reserved_area+0x97/0xdc
[    1.259019]  [<d1e277e1>] ? set_memory_rw+0x48/0x4a
[    1.259019]  [<d1e24c30>] free_init_pages+0x5b/0x7e
[    1.259019]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    1.259019]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    1.259019]  [<d25fb86c>] free_initrd_mem+0x26/0x2a
[    1.259019]  [<d25eedbd>] populate_rootfs+0xd7/0xf9
[    1.259019]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    1.259019]  [<d1e00426>] do_one_initcall+0x7f/0x1b9
[    1.259019]  [<d25eece6>] ? maybe_link.part.2+0xe4/0xe4
[    1.259019]  [<d1e59208>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    1.259019]  [<d1e431eb>] ? parameq+0x13/0x5e
[    1.259019]  [<d25ed59b>] ? repair_env_string+0x12/0x51
[    1.259019]  [<d1e4341e>] ? parse_args+0x1e8/0x318
[    1.259019]  [<d1e3d96a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    1.259019]  [<d25edce7>] kernel_init_freeable+0xde/0x178
[    1.259019]  [<d25ed589>] ? initcall_blacklist+0x81/0x81
[    1.259019]  [<d227ab20>] kernel_init+0xb/0xc7
[    1.259019]  [<d1e4bade>] ? schedule_tail+0xc/0x3a
[    1.259019]  [<d2287340>] ret_from_kernel_thread+0x20/0x30
[    1.259019]  [<d227ab15>] ? rest_init+0xb5/0xb5

Elapsed time: 10
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-ib1-07251153/9a3c4145af32125c5ee39c0272662b47307a8323/vmlinuz-3.16.0-rc6 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:9a3c4145af32125c5ee39c0272662b47307a8323:bisect-linux-9/.vmlinuz-9a3c4145af32125c5ee39c0272662b47307a8323-20140725122722-188-ivb41 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/9a3c4145af32125c5ee39c0272662b47307a8323/vmlinuz-3.16.0-rc6 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb41-1 -serial file:/dev/shm/kboot/serial-quantal-ivb41-1 -daemonize -display none -monitor null /kernel/i386-randconfig-ib1-07251153/9a3c4145af32125c5ee39c0272662b47307a8323/dmesg-quantal-ivb41-87:20140725141827:i386-randconfig-ib1-07251153::
295:1:6 all_good:bad:all_bad boots

bisect: bad commit 9a3c4145af32125c5ee39c0272662b47307a8323
git checkout v3.15
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:1860e379875dfe7271c649058aeddffe5afd9d0d:bisect-linux-9

2014-07-25-14:20:57 1860e379875dfe7271c649058aeddffe5afd9d0d compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-1860e379875dfe7271c649058aeddffe5afd9d0d Check for kernel in /kernel/i386-randconfig-ib1-07251153/1860e379875dfe7271c649058aeddffe5afd9d0d
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-1860e379875dfe7271c649058aeddffe5afd9d0d waiting for completion of /kbuild-tests/build-queue/lkp-ib03-smoke/i386-randconfig-ib1-07251153-1860e379875dfe7271c649058aeddffe5afd9d0d
kernel: /kernel/i386-randconfig-ib1-07251153/1860e379875dfe7271c649058aeddffe5afd9d0d/vmlinuz-3.15.0

2014-07-25-14:39:57 detecting boot state .. 1 10 14 15 17 25. 26 33 40. 51 54 63 70 TEST FAILURE

[    0.838176] PCI: CLS 0 bytes, default 64
[    0.839663] Unpacking initramfs...
[    0.843644] Initramfs unpacking failed: junk in compressed archive
[    0.846129] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.846776] IP: [<d1e57171>] validate_chain.isra.37+0xc5/0x10e5
[    0.846776] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.846776] Oops: 0000 [#1] PREEMPT 
[    0.846776] Modules linked in:
[    0.846776] CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0 #1
[    0.846776] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.846776] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.846776] EIP: 0060:[<d1e57171>] EFLAGS: 00010086 CPU: 0
[    0.846776] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.846776] EAX: 00000000 EBX: 00000085 ECX: 00000000 EDX: fffffffc
[    0.846776] ESI: d044a4f8 EDI: d2851660 EBP: d044dddc ESP: d044dd78
[    0.846776]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.846776] CR0: 8005003b CR2: 0000000c CR3: 12647000 CR4: 000006b0
[    0.846776] Stack:
[    0.846776]  00000085 d044dd84 d1e2395e d044dd8c d1e07c55 d044ddb8 d287cf30 d044a4f8
[    0.846776]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000085
[    0.846776]  d044ddd4 d1e4ced8 326ea7de 00000000 00000000 d044a010 00000085 d044a010
[    0.846776] Call Trace:
[    0.846776]  [<d1e2395e>] ? kvm_clock_read+0x13/0x24
[    0.846776]  [<d1e07c55>] ? sched_clock+0x8/0xb
[    0.846776]  [<d1e4ced8>] ? sched_clock_cpu+0xb1/0xd0
[    0.846776]  [<d1e590f2>] __lock_acquire+0x350/0xaa5
[    0.846776]  [<d1e59f97>] lock_acquire+0x77/0x92
[    0.846776]  [<d1e8d778>] ? adjust_managed_page_count+0x13/0x44
[    0.846776]  [<d227b29c>] _raw_spin_lock+0x3c/0x69
[    0.846776]  [<d1e8d778>] ? adjust_managed_page_count+0x13/0x44
[    0.846776]  [<d1e8d778>] adjust_managed_page_count+0x13/0x44
[    0.846776]  [<d1e9097c>] free_reserved_area+0x6b/0xdc
[    0.846776]  [<d1e27251>] ? set_memory_rw+0x48/0x4a
[    0.846776]  [<d1e246a0>] free_init_pages+0x5b/0x7e
[    0.846776]  [<d25e76c4>] free_initrd_mem+0x26/0x2a
[    0.846776]  [<d25dacc2>] populate_rootfs+0xd7/0xf9
[    0.846776]  [<d25dabeb>] ? maybe_link.part.5+0xe4/0xe4
[    0.846776]  [<d1e00486>] do_one_initcall+0xdf/0x139
[    0.846776]  [<d1e54eb6>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.846776]  [<d1e58a58>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.846776]  [<d1e42afb>] ? parameq+0x13/0x5e
[    0.846776]  [<d25d951a>] ? repair_env_string+0x12/0x51
[    0.846776]  [<d1e42d05>] ? parse_args+0x1bf/0x2f8
[    0.846776]  [<d1e3d125>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.846776]  [<d25d9bec>] kernel_init_freeable+0xde/0x178
[    0.846776]  [<d25d9508>] ? do_early_param+0x78/0x78
[    0.846776]  [<d226ea40>] kernel_init+0xb/0xc7
[    0.846776]  [<d1e4b3be>] ? schedule_tail+0xc/0x3a
[    0.846776]  [<d227c7c0>] ret_from_kernel_thread+0x20/0x30
[    0.846776]  [<d226ea35>] ? rest_init+0xb5/0xb5
[    0.846776] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.846776] EIP: [<d1e57171>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd78
[    0.846776] CR2: 000000000000000c
[    0.846776] ---[ end trace 918ee85e5cc423cf ]---
[    0.846776] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/1860e379875dfe7271c649058aeddffe5afd9d0d/dmesg-quantal-ivb42-65:20140725145224:i386-randconfig-ib1-07251153::
70:1:1 all_good:bad:all_bad boots

bisect: bad commit v3.15
git checkout v3.14
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:455c6fdbd219161bd09b1165f11699d6d73de11c:bisect-linux-9

2014-07-25-14:48:39 455c6fdbd219161bd09b1165f11699d6d73de11c compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-455c6fdbd219161bd09b1165f11699d6d73de11c Check for kernel in /kernel/i386-randconfig-ib1-07251153/455c6fdbd219161bd09b1165f11699d6d73de11c
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-455c6fdbd219161bd09b1165f11699d6d73de11c waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-455c6fdbd219161bd09b1165f11699d6d73de11c
kernel: /kernel/i386-randconfig-ib1-07251153/455c6fdbd219161bd09b1165f11699d6d73de11c/vmlinuz-3.14.0

2014-07-25-14:55:39 detecting boot state ... 1 2 7 11 13 16 40 53 56 57 64 67 78 83. 104 116 118 125 127 135 155 170 179 188 194 198 209 243 246 261 269 270 281 283. 286 290. 291 298 306.. 317 349 353 364 368 401 415 418 423 428 432 436 444 472 474 487 494. 503 509.. 513 520 TEST FAILURE

[   43.741439] rtc-test rtc-test.0: setting system clock to 2014-07-25 07:04:31 UTC (1406271871)
[   43.744152] VFS: Cannot open root device "ram0" or unknown-block(0,0): error -6
[   43.746106] Please append a correct "root=" boot option; here are the available partitions:
[   43.748283] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   43.750393] CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.0 #1
[   43.751749] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[   43.752220]  d005df10 d005df10 d005dec4 d1e6452d d005dee4 d1e60c4d d1f86834 d223aa40
[   43.752220]  3180a41a d005df10 00008000 d385a000 d005df40 d21bff4f d1f79e14 d005df10
[   43.752220]  d005df10 fffffffa 00000000 d385a0ca 00000000 d07f0b40 fffffffa 6e6b6e75
[   43.752220] Call Trace:
[   43.752220]  [<d1e6452d>] dump_stack+0x16/0x18
[   43.752220]  [<d1e60c4d>] panic+0x87/0x174
[   43.752220]  [<d21bff4f>] mount_block_root+0x202/0x274
[   43.752220]  [<d1ac0eaf>] ? SyS_mknod+0x28/0x2a
[   43.752220]  [<d21c001c>] mount_root+0x5b/0x61
[   43.752220]  [<d21c013c>] prepare_namespace+0x11a/0x154
[   43.752220]  [<d1ab2a8c>] ? SyS_access+0x20/0x22
[   43.752220]  [<d21bfc79>] kernel_init_freeable+0x16b/0x178
[   43.752220]  [<d21bf508>] ? do_early_param+0x78/0x78
[   43.752220]  [<d1e5cf90>] kernel_init+0xb/0xc7
[   43.752220]  [<d1a4a9c5>] ? schedule_tail+0xc/0x3a
[   43.752220]  [<d1e6a9b7>] ret_from_kernel_thread+0x1b/0x28
[   43.752220]  [<d1e5cf85>] ? rest_init+0xb5/0xb5
[   43.752220] Kernel Offset: 0x10a00000 from 0xc1000000 (relocation range: 0xc0000000-0xd47fdfff)

Elapsed time: 45 /kernel/i386-randconfig-ib1-07251153/455c6fdbd219161bd09b1165f11699d6d73de11c/dmesg-quantal-vp-7:20140725153127:i386-randconfig-ib1-07251153:3.14.0:1 514:1:7 all_good:bad:all_bad boots

bisect: bad commit v3.14
git checkout v3.13
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:d8ec26d7f8287f5788a494f56e8814210f0e64be:bisect-linux-9

2014-07-25-15:31:14 d8ec26d7f8287f5788a494f56e8814210f0e64be compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-d8ec26d7f8287f5788a494f56e8814210f0e64be Check for kernel in /kernel/i386-randconfig-ib1-07251153/d8ec26d7f8287f5788a494f56e8814210f0e64be waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-d8ec26d7f8287f5788a494f56e8814210f0e64be
kernel: /kernel/i386-randconfig-ib1-07251153/d8ec26d7f8287f5788a494f56e8814210f0e64be/vmlinuz-3.13.0

2014-07-25-15:33:14 detecting boot state 1 2 7. 15 35 50 56 60 62 85 90 100 121 124 128 147 162 165 208 222 225 227 235 272 279 284 291 326 364 381 431 503 561 630 646 715 774 793 898 900 SUCCESS

bisect: good commit v3.13
git bisect start v3.14 v3.13 --
/c/kernel-tests/linear-bisect: ["-b", "v3.14", "-g", "v3.13", "/c/kernel-tests/bisect-test-boot-failure.sh", "/c/boot-bisect/linux-9/obj-bisect"]
Bisecting: 13415 revisions left to test after this (roughly 14 steps)
[494479038d97f1b9f76fc633a360a681acdf035c] Merge tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:494479038d97f1b9f76fc633a360a681acdf035c:bisect-linux-9

2014-07-25-15:53:48 494479038d97f1b9f76fc633a360a681acdf035c compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-494479038d97f1b9f76fc633a360a681acdf035c Check for kernel in /kernel/i386-randconfig-ib1-07251153/494479038d97f1b9f76fc633a360a681acdf035c
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-494479038d97f1b9f76fc633a360a681acdf035c waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-494479038d97f1b9f76fc633a360a681acdf035c
status: FAIL: build error
2014-07-25 16:09:48 Kernel build fail or timeout
2014-07-25-16:09:48 494479038d97f1b9f76fc633a360a681acdf035c SKIP BROKEN BUILD
Check /kbuild-tests/build-served/i386-randconfig-ib1-07251153-494479038d97f1b9f76fc633a360a681acdf035c
Bisecting: 13415 revisions left to test after this (roughly 14 steps)
[09df7c4c8097ca4a11393b1edd4997d786daad52] x86: Remove CONFIG_X86_OOSTORE
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:09df7c4c8097ca4a11393b1edd4997d786daad52:bisect-linux-9

2014-07-25-16:09:50 09df7c4c8097ca4a11393b1edd4997d786daad52 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-09df7c4c8097ca4a11393b1edd4997d786daad52 Check for kernel in /kernel/i386-randconfig-ib1-07251153/09df7c4c8097ca4a11393b1edd4997d786daad52
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-09df7c4c8097ca4a11393b1edd4997d786daad52 waiting for completion of /kbuild-tests/build-queue/lkp-ib03-smoke/i386-randconfig-ib1-07251153-09df7c4c8097ca4a11393b1edd4997d786daad52
kernel: /kernel/i386-randconfig-ib1-07251153/09df7c4c8097ca4a11393b1edd4997d786daad52/vmlinuz-3.14.0-rc6-00018-g09df7c4

2014-07-25-16:17:51 detecting boot state .. TEST FAILURE

[    0.655558] PCI: CLS 0 bytes, default 64
[    0.656947] Unpacking initramfs...
[    1.627346] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    1.629153] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    1.630820] IP: [<cddc7586>] rapl_pmu_init+0x116/0x175
[    1.632119] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    1.632709] Oops: 0000 [#1] PREEMPT 
[    1.632709] Modules linked in:
[    1.632709] CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.0-rc6-00018-g09df7c4 #1
[    1.632709] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    1.632709] task: d1056010 ti: d1058000 task.ti: d1058000
[    1.632709] EIP: 0060:[<cddc7586>] EFLAGS: 00010246 CPU: 0
[    1.632709] EIP is at rapl_pmu_init+0x116/0x175
[    1.632709] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    1.632709] ESI: cddc7470 EDI: 000000d1 EBP: d1059f00 ESP: d1059ed8
[    1.632709]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    1.632709] CR0: 80050033 CR2: 0000003c CR3: 0de2d000 CR4: 000406b0
[    1.632709] Stack:
[    1.632709]  cddc547e d11553d8 cdc35c94 d11221c0 cdb7a9d1 00000002 cd8e47ae 00000000
[    1.632709]  cddc7470 000000d1 d1059f74 cd600486 cd654236 d1059f2c cd656d9d d3ff63d1
[    1.632709]  d1059f34 cd64204b d3ff63d1 d1059f00 cddbf51a cdc22738 000000d1 d1059f74
[    1.632709] Call Trace:
[    1.632709]  [<cddc547e>] ? cache_sysfs_init+0x1dd/0x1e7
[    1.632709]  [<cd8e47ae>] ? register_syscore_ops+0x32/0x35
[    1.632709]  [<cddc7470>] ? intel_uncore_init+0x251/0x251
[    1.632709]  [<cd600486>] do_one_initcall+0xdf/0x139
[    1.632709]  [<cd654236>] ? lock_release_holdtime.part.20+0x93/0xf8
[    1.632709]  [<cd656d9d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    1.632709]  [<cd64204b>] ? parameq+0x13/0x5e
[    1.632709]  [<cddbf51a>] ? repair_env_string+0x12/0x51
[    1.632709]  [<cd642255>] ? parse_args+0x1bf/0x2f8
[    1.632709]  [<cd63c6a5>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    1.632709]  [<cddbfbec>] kernel_init_freeable+0xde/0x178
[    1.632709]  [<cddbf508>] ? do_early_param+0x78/0x78
[    1.632709]  [<cda5c9d0>] kernel_init+0xb/0xc7
[    1.632709]  [<cd64a83e>] ? schedule_tail+0xc/0x3a
[    1.632709]  [<cda6a437>] ret_from_kernel_thread+0x1b/0x28
[    1.632709]  [<cda5c9c5>] ? rest_init+0xb5/0xb5
[    1.632709] Code: 24 ba 93 02 00 00 b8 94 fb b7 cd e8 0b 55 86 ff 89 5c 24 04 c7 04 24 d4 fb b7 cd e8 30 a2 c9 ff 83 c8 ff eb 5d 8b 1d 40 d7 c3 cd <8b> 43 3c 8b 53 40 e8 c8 7d 86 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    1.632709] EIP: [<cddc7586>] rapl_pmu_init+0x116/0x175 SS:ESP 0068:d1059ed8
[    1.632709] CR2: 000000000000003c
[    1.632709] ---[ end trace 325cd688bb3290f6 ]---
[    1.632709] swapper (1) used greatest stack depth: 5716 bytes left

/kernel/i386-randconfig-ib1-07251153/09df7c4c8097ca4a11393b1edd4997d786daad52/dmesg-quantal-kbuild-10:20140725161628:i386-randconfig-ib1-07251153:3.14.0-rc6-00018-g09df7c4:1 /kernel/i386-randconfig-ib1-07251153/09df7c4c8097ca4a11393b1edd4997d786daad52/dmesg-quantal-kbuild-18:20140725161628:i386-randconfig-ib1-07251153:3.14.0-rc6-00018-g09df7c4:1 /kernel/i386-randconfig-ib1-07251153/09df7c4c8097ca4a11393b1edd4997d786daad52/dmesg-quantal-kbuild-23:20140725161628:i386-randconfig-ib1-07251153:3.14.0-rc6-00018-g09df7c4:1 0:3:3 all_good:bad:all_bad boots

Bisecting: 13073 revisions left to test after this (roughly 14 steps) [2cbe5c76fc5e38e9af4b709593146e4b8272b69e] hpfs: remember free space
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:2cbe5c76fc5e38e9af4b709593146e4b8272b69e:bisect-linux-9

2014-07-25-16:18:59 2cbe5c76fc5e38e9af4b709593146e4b8272b69e compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-2cbe5c76fc5e38e9af4b709593146e4b8272b69e Check for kernel in /kernel/i386-randconfig-ib1-07251153/2cbe5c76fc5e38e9af4b709593146e4b8272b69e
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-2cbe5c76fc5e38e9af4b709593146e4b8272b69e
status: FAIL: build error
2014-07-25 16:20:59 Kernel build fail or timeout
2014-07-25-16:20:59 2cbe5c76fc5e38e9af4b709593146e4b8272b69e SKIP BROKEN BUILD
Check /kbuild-tests/build-served/i386-randconfig-ib1-07251153-2cbe5c76fc5e38e9af4b709593146e4b8272b69e
Bisecting: 13073 revisions left to test after this (roughly 14 steps) [15c81026204da897a05424c79263aea861a782cc] Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:15c81026204da897a05424c79263aea861a782cc:bisect-linux-9

2014-07-25-16:21:03 15c81026204da897a05424c79263aea861a782cc compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-15c81026204da897a05424c79263aea861a782cc Check for kernel in /kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-15c81026204da897a05424c79263aea861a782cc
kernel: /kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc/vmlinuz-3.13.0-00762-g15c8102

2014-07-25-16:23:03 detecting boot state . 2 TEST FAILURE

[    8.190007] PCI: CLS 0 bytes, default 64
[    8.191384] Unpacking initramfs...
[    9.024840] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    9.026863] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    9.028871] IP: [<c53b648d>] rapl_pmu_init+0x116/0x175
[    9.030433] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    9.032092] Oops: 0000 [#1] PREEMPT 
[    9.033184] Modules linked in:
[    9.034361] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-00762-g15c8102 #3
[    9.036155] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    9.037715] task: d105a010 ti: d105c000 task.ti: d105c000
[    9.039196] EIP: 0060:[<c53b648d>] EFLAGS: 00010246 CPU: 0
[    9.040703] EIP is at rapl_pmu_init+0x116/0x175
[    9.041988] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    9.043645] ESI: c53b6377 EDI: 000000d0 EBP: d105df00 ESP: d105ded8
[    9.045301]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    9.046811] CR0: 80050033 CR2: 0000003c CR3: 0541a000 CR4: 000406b0
[    9.048456] Stack:
[    9.049114]  c53b43d5 d114f498 c5223c94 d111d1c0 c516a5cd 00000002 c4ee1bfe 00000000
[    9.052277]  c53b6377 000000d0 d105df74 c4c00477 c4e3e475 00000060 00000246 d3ff63cd
[    9.055427]  d105df34 c4c420bb d3ff63cd d105df00 c53ae512 c5211610 000000d0 d105df74
[    9.058434] Call Trace:
[    9.059396]  [<c53b43d5>] ? cache_sysfs_init+0x1dd/0x1e7
[    9.060910]  [<c4ee1bfe>] ? register_syscore_ops+0x32/0x35
[    9.062287]  [<c53b6377>] ? intel_uncore_init+0x251/0x251
[    9.063786]  [<c4c00477>] do_one_initcall+0xdf/0x138
[    9.065228]  [<c4e3e475>] ? strlen+0xf/0x19
[    9.066518]  [<c4c420bb>] ? parameq+0x13/0x5e
[    9.067828]  [<c53ae512>] ? repair_env_string+0x12/0x51
[    9.069229]  [<c4c422c5>] ? parse_args+0x1bf/0x2f8
[    9.070476]  [<c4c3c658>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    9.071542]  [<c53aeb46>] kernel_init_freeable+0xde/0x178
[    9.072804]  [<c53ae500>] ? do_early_param+0x78/0x78
[    9.074145]  [<c5050d20>] kernel_init+0xb/0xed
[    9.075123]  [<c4c4a882>] ? schedule_tail+0xc/0x3a
[    9.078689]  [<c505e5b7>] ret_from_kernel_thread+0x1b/0x28
[    9.079923]  [<c5050d15>] ? rest_init+0xb5/0xb5
[    9.080815] Code: 24 ba 93 02 00 00 b8 c8 f7 16 c5 e8 14 66 87 ff 89 5c 24 04 c7 04 24 0c f8 16 c5 e8 75 f5 c9 ff 83 c8 ff eb 5d 8b 1d 60 b6 22 c5 <8b> 43 3c 8b 53 40 e8 c1 8e 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    9.090959] EIP: [<c53b648d>] rapl_pmu_init+0x116/0x175 SS:ESP 0068:d105ded8
[    9.092647] CR2: 000000000000003c
[    9.093664] ---[ end trace 6c6f706ed07caf31 ]---
[    9.095149] swapper (1) used greatest stack depth: 5784 bytes left

/kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc/dmesg-quantal-kbuild-4:20140725162149:i386-randconfig-ib1-07251153:3.13.0-00762-g15c8102:3 /kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc/dmesg-quantal-kbuild-7:20140725162148:i386-randconfig-ib1-07251153:3.13.0-00762-g15c8102:3 /kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc/dmesg-yocto-kbuild-4:20140725162145:i386-randconfig-ib1-07251153:3.13.0-00762-g15c8102:3 /kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc/dmesg-yocto-kbuild-5:20140725162141:i386-randconfig-ib1-07251153:3.13.0-00762-g15c8102:3 /kernel/i386-randconfig-ib1-07251153/15c81026204da897a05424c79263aea861a782cc/dmesg-yocto-kbuild-12:20140725162158:i386-randconfig-ib1-07251153:3.13.0-00762-g15c8102:3 2:5:5 all_good:bad:all_bad boots

Bisecting: 762 revisions left to test after this (roughly 10 steps)
[a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8] Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8:bisect-linux-9

2014-07-25-16:24:09 a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8 Check for kernel in /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8
kernel: /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/vmlinuz-3.13.0-00594-ga0fa1dd

2014-07-25-16:33:09 detecting boot state . TEST FAILURE

[    6.535648] PCI: CLS 0 bytes, default 64
[    6.537363] Unpacking initramfs...
[    7.573029] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    7.574901] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    7.576638] IP: [<c09b41f2>] rapl_pmu_init+0x116/0x175
[    7.578023] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    7.579562] Oops: 0000 [#1] PREEMPT 
[    7.580777] Modules linked in:
[    7.581789] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-00594-ga0fa1dd #3
[    7.583381] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    7.584738] task: d105a010 ti: d105c000 task.ti: d105c000
[    7.586046] EIP: 0060:[<c09b41f2>] EFLAGS: 00010246 CPU: 0
[    7.587329] EIP is at rapl_pmu_init+0x116/0x175
[    7.588468] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    7.589883] ESI: c09b40dc EDI: 000000d0 EBP: d105df00 ESP: d105ded8
[    7.591347]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    7.592630] CR0: 80050033 CR2: 0000003c CR3: 00a18000 CR4: 000406b0
[    7.594057] Stack:
[    7.594852]  c09b213a d114f498 c0821b94 d111d200 c0768df4 00000002 c04e0d9e 00000000
[    7.597579]  c09b40dc 000000d0 d105df74 c0200477 c02532a6 d105df2c c0255e0d d3ff63cd
[    7.600349]  d105df34 c02411eb d3ff63cd d105df00 c09ac512 c080fd14 000000d0 d105df74
[    7.603091] Call Trace:
[    7.603942]  [<c09b213a>] ? cache_sysfs_init+0x1dd/0x1e7
[    7.605234]  [<c04e0d9e>] ? register_syscore_ops+0x32/0x35
[    7.606543]  [<c09b40dc>] ? intel_uncore_init+0x251/0x251
[    7.607871]  [<c0200477>] do_one_initcall+0xdf/0x138
[    7.609108]  [<c02532a6>] ? lock_release_holdtime.part.20+0x93/0xf8
[    7.610508]  [<c0255e0d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    7.611874]  [<c02411eb>] ? parameq+0x13/0x5e
[    7.612958]  [<c09ac512>] ? repair_env_string+0x12/0x51
[    7.614176]  [<c02413f5>] ? parse_args+0x1bf/0x2f8
[    7.615372]  [<c023b788>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    7.616786]  [<c09acb46>] kernel_init_freeable+0xde/0x178
[    7.618026]  [<c09ac500>] ? do_early_param+0x78/0x78
[    7.619235]  [<c064fef0>] kernel_init+0xb/0xed
[    7.620340]  [<c0249962>] ? schedule_tail+0xc/0x3a
[    7.624535]  [<c065d837>] ret_from_kernel_thread+0x1b/0x28
[    7.625849]  [<c064fee5>] ? rest_init+0xb5/0xb5
[    7.627046] Code: 24 ba 93 02 00 00 b8 ac de 76 c0 e8 bf 79 87 ff 89 5c 24 04 c7 04 24 f0 de 76 c0 e8 40 0a ca ff 83 c8 ff eb 5d 8b 1d 60 95 82 c0 <8b> 43 3c 8b 53 40 e8 6c a2 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    7.636668] EIP: [<c09b41f2>] rapl_pmu_init+0x116/0x175 SS:ESP 0068:d105ded8
[    7.638313] CR2: 000000000000003c
[    7.639257] ---[ end trace 91fc4c67e5c93a90 ]---
[    7.640434] swapper (1) used greatest stack depth: 5884 bytes left

/kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-17:20140725163048:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-1:20140725163048:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-21:20140725163050:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-28:20140725163046:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-yocto-kbuild-12:20140725163045:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-yocto-kbuild-6:20140725163042:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-4:20140725163055:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-yocto-kbuild-25:20140725163100:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-14:20140725163104:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-22:20140725163105:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-yocto-kbuild-28:20140725163101:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-yocto-kbuild-28:20140725163113:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-24:20140725163116:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-28:20140725163118:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 /kernel/i386-randconfig-ib1-07251153/a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8/dmesg-quantal-kbuild-1:20140725163125:i386-randconfig-ib1-07251153:3.13.0-00594-ga0fa1dd:3 0:15:15 all_good:bad:all_bad boots

Bisecting: 594 revisions left to test after this (roughly 10 steps)
[edde1fb8c41d0db7c8ce17fb32886da2e389b0cc] Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:edde1fb8c41d0db7c8ce17fb32886da2e389b0cc:bisect-linux-9

2014-07-25-16:33:41 edde1fb8c41d0db7c8ce17fb32886da2e389b0cc compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-edde1fb8c41d0db7c8ce17fb32886da2e389b0cc Check for kernel in /kernel/i386-randconfig-ib1-07251153/edde1fb8c41d0db7c8ce17fb32886da2e389b0cc
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-edde1fb8c41d0db7c8ce17fb32886da2e389b0cc waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/i386-randconfig-ib1-07251153-edde1fb8c41d0db7c8ce17fb32886da2e389b0cc
kernel: /kernel/i386-randconfig-ib1-07251153/edde1fb8c41d0db7c8ce17fb32886da2e389b0cc/vmlinuz-3.13.0-00125-gedde1fb

2014-07-25-16:36:42 detecting boot state ... 2 5. 11 14. 27 32.. 36 42 46 50 52. 60 71 74 79 82 89. 93 96. 102 104... 105 111 117.... 118 120 122 125.. 133. 134 136 137 142. 143 144 149 152 155. 156.. 159... 163... 165 170 172. 173... 174 175. 177 182 183. 185. 189 191 199 202. 205 206 207 208 214 222 228 232 235 254 260 261 265 273 275 286 296 304 307.. 324 327 328 359 373 403 411 439 444 468 478 512 526 541 575 599 600 625 655 666 670 720 737 741 750 801 823 836 881 900 SUCCESS

Bisecting: 469 revisions left to test after this (roughly 9 steps)
[a693c46e14c9fdadbcd68ddfa94a4f72495531a9] Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:a693c46e14c9fdadbcd68ddfa94a4f72495531a9:bisect-linux-9

2014-07-25-17:48:49 a693c46e14c9fdadbcd68ddfa94a4f72495531a9 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-a693c46e14c9fdadbcd68ddfa94a4f72495531a9 Check for kernel in /kernel/i386-randconfig-ib1-07251153/a693c46e14c9fdadbcd68ddfa94a4f72495531a9 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-a693c46e14c9fdadbcd68ddfa94a4f72495531a9
kernel: /kernel/i386-randconfig-ib1-07251153/a693c46e14c9fdadbcd68ddfa94a4f72495531a9/vmlinuz-3.13.0-00228-ga693c46

2014-07-25-17:50:49 detecting boot state . 79 298 375 442 543 717 749 856 900 SUCCESS

Bisecting: 366 revisions left to test after this (roughly 9 steps)
[2cc3f16cad1561c6fc551aefff559e53726efc8b] Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:2cc3f16cad1561c6fc551aefff559e53726efc8b:bisect-linux-9

2014-07-25-17:55:50 2cc3f16cad1561c6fc551aefff559e53726efc8b compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-2cc3f16cad1561c6fc551aefff559e53726efc8b Check for kernel in /kernel/i386-randconfig-ib1-07251153/2cc3f16cad1561c6fc551aefff559e53726efc8b waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-2cc3f16cad1561c6fc551aefff559e53726efc8b
kernel: /kernel/i386-randconfig-ib1-07251153/2cc3f16cad1561c6fc551aefff559e53726efc8b/vmlinuz-3.13.0-00234-g2cc3f16

2014-07-25-17:57:50 detecting boot state 124 154. 159 257 272 278 296 300 381 393 405 455 501 514. 552 621. 634 651 740. 774 842 858 865 896 900 SUCCESS

Bisecting: 360 revisions left to test after this (roughly 9 steps)
[9326657abe1a83ed4b4f396b923ca1217fd50cba] Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:9326657abe1a83ed4b4f396b923ca1217fd50cba:bisect-linux-9

2014-07-25-18:12:21 9326657abe1a83ed4b4f396b923ca1217fd50cba compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-9326657abe1a83ed4b4f396b923ca1217fd50cba Check for kernel in /kernel/i386-randconfig-ib1-07251153/9326657abe1a83ed4b4f396b923ca1217fd50cba
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-9326657abe1a83ed4b4f396b923ca1217fd50cba waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-9326657abe1a83ed4b4f396b923ca1217fd50cba
kernel: /kernel/i386-randconfig-ib1-07251153/9326657abe1a83ed4b4f396b923ca1217fd50cba/vmlinuz-3.13.0-00530-g9326657

2014-07-25-18:17:21 detecting boot state ..... 3 4 9 TEST FAILURE

[    0.613465] PCI: CLS 0 bytes, default 64
[    0.614743] Unpacking initramfs...
[    1.509359] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    1.510561] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    1.511697] IP: [<c09b20c4>] rapl_pmu_init+0x116/0x175
[    1.512011] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    1.512011] Oops: 0000 [#1] PREEMPT 
[    1.512011] Modules linked in:
[    1.512011] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-00530-g9326657 #4
[    1.512011] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    1.512011] task: d105a010 ti: d105c000 task.ti: d105c000
[    1.512011] EIP: 0060:[<c09b20c4>] EFLAGS: 00010246 CPU: 0
[    1.512011] EIP is at rapl_pmu_init+0x116/0x175
[    1.512011] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    1.512011] ESI: c09b1fae EDI: 000000d0 EBP: d105df00 ESP: d105ded8
[    1.512011]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    1.512011] CR0: 80050033 CR2: 0000003c CR3: 00a16000 CR4: 000406b0
[    1.512011] Stack:
[    1.512011]  c09b000c d114f498 c081fb14 d111d200 c0766a98 00000002 c04dfaee 00000000
[    1.512011]  c09b1fae 000000d0 d105df74 c0200477 c0251d26 d105df2c c025488d d3ff63cd
[    1.512011]  d105df34 c02411fb d3ff63cd d105df00 c09aa512 c080d94c 000000d0 d105df74
[    1.512011] Call Trace:
[    1.512011]  [<c09b000c>] ? cache_sysfs_init+0x1dd/0x1e7
[    1.512011]  [<c04dfaee>] ? register_syscore_ops+0x32/0x35
[    1.512011]  [<c09b1fae>] ? intel_uncore_init+0x251/0x251
[    1.512011]  [<c0200477>] do_one_initcall+0xdf/0x138
[    1.512011]  [<c0251d26>] ? lock_release_holdtime.part.20+0x93/0xf8
[    1.512011]  [<c025488d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    1.512011]  [<c02411fb>] ? parameq+0x13/0x5e
[    1.512011]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    1.512011]  [<c0241405>] ? parse_args+0x1bf/0x2f8
[    1.512011]  [<c023b798>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    1.512011]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    1.512011]  [<c09aa500>] ? do_early_param+0x78/0x78
[    1.512011]  [<c064e680>] kernel_init+0xb/0xed
[    1.512011]  [<c02492c9>] ? schedule_tail+0xc/0x3a
[    1.512011]  [<c065bfb7>] ret_from_kernel_thread+0x1b/0x28
[    1.512011]  [<c064e675>] ? rest_init+0xb5/0xb5
[    1.512011] Code: 24 ba 93 02 00 00 b8 50 bb 76 c0 e8 1d 9a 87 ff 89 5c 24 04 c7 04 24 94 bb 76 c0 e8 57 13 ca ff 83 c8 ff eb 5d 8b 1d e0 74 82 c0 <8b> 43 3c 8b 53 40 e8 ca c2 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    1.512011] EIP: [<c09b20c4>] rapl_pmu_init+0x116/0x175 SS:ESP 0068:d105ded8
[    1.512011] CR2: 000000000000003c
[    1.512011] ---[ end trace 1c355d5cb3c9c666 ]---
[    1.512011] swapper (1) used greatest stack depth: 5632 bytes left

/kernel/i386-randconfig-ib1-07251153/9326657abe1a83ed4b4f396b923ca1217fd50cba/dmesg-quantal-kbuild-27:20140725181914:i386-randconfig-ib1-07251153:3.13.0-00530-g9326657:4 /kernel/i386-randconfig-ib1-07251153/9326657abe1a83ed4b4f396b923ca1217fd50cba/dmesg-quantal-kbuild-5:20140725181912:i386-randconfig-ib1-07251153:3.13.0-00530-g9326657:4 9:2:2 all_good:bad:all_bad boots

linear-bisect: bad branch may be branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
linear-bisect: handle over to git bisect
linear-bisect: git bisect start 9326657abe1a83ed4b4f396b923ca1217fd50cba 2cc3f16cad1561c6fc551aefff559e53726efc8b -- Previous HEAD position was 9326657... Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
HEAD is now at b4d3318... Merge remote-tracking branch 'crypto/master'
Bisecting: 147 revisions left to test after this (roughly 7 steps)
[7bb73553e2490ac6667387ee723e0faa61e9d999] tools lib traceevent: Get rid of die() in reparent_op_arg()
linear-bisect: git bisect run /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:7bb73553e2490ac6667387ee723e0faa61e9d999:bisect-linux-9

2014-07-25-18:28:10 7bb73553e2490ac6667387ee723e0faa61e9d999 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-7bb73553e2490ac6667387ee723e0faa61e9d999 Check for kernel in /kernel/i386-randconfig-ib1-07251153/7bb73553e2490ac6667387ee723e0faa61e9d999
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-7bb73553e2490ac6667387ee723e0faa61e9d999 waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/i386-randconfig-ib1-07251153-7bb73553e2490ac6667387ee723e0faa61e9d999
kernel: /kernel/i386-randconfig-ib1-07251153/7bb73553e2490ac6667387ee723e0faa61e9d999/vmlinuz-3.12.0-05850-g7bb7355

2014-07-25-18:38:10 detecting boot state . TEST FAILURE

[    0.480970] PCI: CLS 0 bytes, default 64
[    0.481996] Unpacking initramfs...
[    1.279547] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    1.281320] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    1.282801] IP: [<c09b20c0>] rapl_pmu_init+0x113/0x172
[    1.283678] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    1.284710] Oops: 0000 [#1] PREEMPT 
[    1.284893] Modules linked in:
[    1.284893] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05850-g7bb7355 #7
[    1.284893] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    1.284893] task: d105a020 ti: d105c000 task.ti: d105c000
[    1.284893] EIP: 0060:[<c09b20c0>] EFLAGS: 00010246 CPU: 0
[    1.284893] EIP is at rapl_pmu_init+0x113/0x172
[    1.284893] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    1.284893] ESI: c09b1fad EDI: 000000cc EBP: d105df00 ESP: d105ded8
[    1.284893]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    1.284893] CR0: 80050033 CR2: 0000003c CR3: 00a16000 CR4: 000406b0
[    1.284893] Stack:
[    1.284893]  c09b000c d114d498 c081fa94 d114ec00 c0766ec8 00000002 c04ddb1e 00000000
[    1.284893]  c09b1fad 000000cc d105df74 c0200477 c0251b76 d105df2c c02546dd d3ff63cb
[    1.284893]  d105df34 c024112b d3ff63cb d105df00 c09aa512 c080d734 000000cc d105df74
[    1.284893] Call Trace:
[    1.284893]  [<c09b000c>] ? cache_sysfs_init+0x1dd/0x1e7
[    1.284893]  [<c04ddb1e>] ? register_syscore_ops+0x32/0x35
[    1.284893]  [<c09b1fad>] ? intel_uncore_init+0x251/0x251
[    1.284893]  [<c0200477>] do_one_initcall+0xdf/0x138
[    1.284893]  [<c0251b76>] ? lock_release_holdtime.part.20+0x93/0xf8
[    1.284893]  [<c02546dd>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    1.284893]  [<c024112b>] ? parameq+0x13/0x5e
[    1.284893]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    1.284893]  [<c0241335>] ? parse_args+0x1bf/0x2f8
[    1.284893]  [<c023b738>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    1.284893]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    1.284893]  [<c09aa500>] ? do_early_param+0x78/0x78
[    1.284893]  [<c064bd70>] kernel_init+0xb/0xed
[    1.284893]  [<c02491f9>] ? schedule_tail+0xc/0x3a
[    1.284893]  [<c06596b7>] ret_from_kernel_thread+0x1b/0x28
[    1.284893]  [<c064bd65>] ? rest_init+0xb5/0xb5
[    1.284893] Code: 24 ba 81 02 00 00 b8 4c bf 76 c0 e8 e1 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 3b ea c9 ff 83 c8 ff eb 5d 8b 1d 80 73 82 c0 <8b> 43 3c 8b 53 40 e8 8e c2 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    1.284893] EIP: [<c09b20c0>] rapl_pmu_init+0x113/0x172 SS:ESP 0068:d105ded8
[    1.284893] CR2: 000000000000003c
[    1.284893] ---[ end trace 2bd4ade0cafb7955 ]---
[    1.284893] swapper (1) used greatest stack depth: 5800 bytes left

/kernel/i386-randconfig-ib1-07251153/7bb73553e2490ac6667387ee723e0faa61e9d999/dmesg-quantal-kbuild-3:20140725183543:i386-randconfig-ib1-07251153:3.12.0-05850-g7bb7355:7 0:1:1 all_good:bad:all_bad boots

Bisecting: 73 revisions left to test after this (roughly 6 steps)
[3d7c0144491bd8c21d53b43032274a85efdfe434] perf tools: Add build and install plugins targets
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:3d7c0144491bd8c21d53b43032274a85efdfe434:bisect-linux-9

2014-07-25-18:38:42 3d7c0144491bd8c21d53b43032274a85efdfe434 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-3d7c0144491bd8c21d53b43032274a85efdfe434 Check for kernel in /kernel/i386-randconfig-ib1-07251153/3d7c0144491bd8c21d53b43032274a85efdfe434 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-3d7c0144491bd8c21d53b43032274a85efdfe434
kernel: /kernel/i386-randconfig-ib1-07251153/3d7c0144491bd8c21d53b43032274a85efdfe434/vmlinuz-3.12.0-05776-g3d7c014

2014-07-25-18:40:42 detecting boot state 11 TEST FAILURE

[    0.561584] PCI: CLS 0 bytes, default 64
[    0.562625] Unpacking initramfs...
[    1.534176] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    1.536205] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    1.538212] IP: [<c09b20c0>] rapl_pmu_init+0x113/0x172
[    1.539759] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    1.540028] Oops: 0000 [#1] PREEMPT 
[    1.540028] Modules linked in:
[    1.540028] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05776-g3d7c014 #8
[    1.540028] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    1.540028] task: d105a020 ti: d105c000 task.ti: d105c000
[    1.540028] EIP: 0060:[<c09b20c0>] EFLAGS: 00010246 CPU: 0
[    1.540028] EIP is at rapl_pmu_init+0x113/0x172
[    1.540028] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    1.540028] ESI: c09b1fad EDI: 000000cc EBP: d105df00 ESP: d105ded8
[    1.540028]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    1.540028] CR0: 80050033 CR2: 0000003c CR3: 00a16000 CR4: 000406b0
[    1.540028] Stack:
[    1.540028]  c09b000c d114d498 c081fa94 d114ec00 c0766ec8 00000002 c04ddb1e 00000000
[    1.540028]  c09b1fad 000000cc d105df74 c0200477 c0251b76 d105df2c c02546dd d3ff63cb
[    1.540028]  d105df34 c024112b d3ff63cb d105df00 c09aa512 c080d734 000000cc d105df74
[    1.540028] Call Trace:
[    1.540028]  [<c09b000c>] ? cache_sysfs_init+0x1dd/0x1e7
[    1.540028]  [<c04ddb1e>] ? register_syscore_ops+0x32/0x35
[    1.540028]  [<c09b1fad>] ? intel_uncore_init+0x251/0x251
[    1.540028]  [<c0200477>] do_one_initcall+0xdf/0x138
[    1.540028]  [<c0251b76>] ? lock_release_holdtime.part.20+0x93/0xf8
[    1.540028]  [<c02546dd>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    1.540028]  [<c024112b>] ? parameq+0x13/0x5e
[    1.540028]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    1.540028]  [<c0241335>] ? parse_args+0x1bf/0x2f8
[    1.540028]  [<c023b738>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    1.540028]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    1.540028]  [<c09aa500>] ? do_early_param+0x78/0x78
[    1.540028]  [<c064bd70>] kernel_init+0xb/0xed
[    1.540028]  [<c02491f9>] ? schedule_tail+0xc/0x3a
[    1.540028]  [<c06596b7>] ret_from_kernel_thread+0x1b/0x28
[    1.540028]  [<c064bd65>] ? rest_init+0xb5/0xb5
[    1.540028] Code: 24 ba 81 02 00 00 b8 4c bf 76 c0 e8 e1 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 3b ea c9 ff 83 c8 ff eb 5d 8b 1d 80 73 82 c0 <8b> 43 3c 8b 53 40 e8 8e c2 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    1.540028] EIP: [<c09b20c0>] rapl_pmu_init+0x113/0x172 SS:ESP 0068:d105ded8
[    1.540028] CR2: 000000000000003c
[    1.540028] ---[ end trace 601b9d2fa5eeeb95 ]---
[    1.540028] swapper (1) used greatest stack depth: 5800 bytes left

/kernel/i386-randconfig-ib1-07251153/3d7c0144491bd8c21d53b43032274a85efdfe434/dmesg-quantal-kbuild-17:20140725183738:i386-randconfig-ib1-07251153:3.12.0-05776-g3d7c014:8 /kernel/i386-randconfig-ib1-07251153/3d7c0144491bd8c21d53b43032274a85efdfe434/dmesg-yocto-kbuild-18:20140725183909:i386-randconfig-ib1-07251153:3.12.0-05776-g3d7c014:8 /kernel/i386-randconfig-ib1-07251153/3d7c0144491bd8c21d53b43032274a85efdfe434/dmesg-yocto-kbuild-20:20140725183910:i386-randconfig-ib1-07251153:3.12.0-05776-g3d7c014:8 /kernel/i386-randconfig-ib1-07251153/3d7c0144491bd8c21d53b43032274a85efdfe434/dmesg-yocto-kbuild-26:20140725183906:i386-randconfig-ib1-07251153:3.12.0-05776-g3d7c014:8 11:4:4 all_good:bad:all_bad boots

Bisecting: 36 revisions left to test after this (roughly 5 steps)
[ba1ddf42f3c3af111d3adee277534f73c1ef6a9b] perf script: Print mmap[2] events also
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:ba1ddf42f3c3af111d3adee277534f73c1ef6a9b:bisect-linux-9

2014-07-25-18:41:14 ba1ddf42f3c3af111d3adee277534f73c1ef6a9b compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-ba1ddf42f3c3af111d3adee277534f73c1ef6a9b Check for kernel in /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-ba1ddf42f3c3af111d3adee277534f73c1ef6a9b
kernel: /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/vmlinuz-3.12.0-05739-gba1ddf4

2014-07-25-18:43:14 detecting boot state . TEST FAILURE

[    0.599693] PCI: CLS 0 bytes, default 64
[    0.601762] Unpacking initramfs...
[    1.626282] Freeing initrd memory: 24852K (d27ab000 - d3ff0000)
[    1.627871] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    1.628009] IP: [<c09b20c0>] rapl_pmu_init+0x113/0x172
[    1.628009] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    1.628009] Oops: 0000 [#1] PREEMPT 
[    1.628009] Modules linked in:
[    1.628009] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05739-gba1ddf4 #9
[    1.628009] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    1.628009] task: d105a020 ti: d105c000 task.ti: d105c000
[    1.628009] EIP: 0060:[<c09b20c0>] EFLAGS: 00010246 CPU: 0
[    1.628009] EIP is at rapl_pmu_init+0x113/0x172
[    1.628009] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    1.628009] ESI: c09b1fad EDI: 000000cc EBP: d105df00 ESP: d105ded8
[    1.628009]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    1.628009] CR0: 80050033 CR2: 0000003c CR3: 00a16000 CR4: 000406b0
[    1.628009] Stack:
[    1.628009]  c09b000c d114d498 c081fa94 d114ec00 c0766ec8 00000002 c04ddb1e 00000000
[    1.628009]  c09b1fad 000000cc d105df74 c0200477 c0251b76 d105df2c c02546dd d3ff63cd
[    1.628009]  d105df34 c024112b d3ff63cd d105df00 c09aa512 c080d72c 000000cc d105df74
[    1.628009] Call Trace:
[    1.628009]  [<c09b000c>] ? cache_sysfs_init+0x1dd/0x1e7
[    1.628009]  [<c04ddb1e>] ? register_syscore_ops+0x32/0x35
[    1.628009]  [<c09b1fad>] ? intel_uncore_init+0x251/0x251
[    1.628009]  [<c0200477>] do_one_initcall+0xdf/0x138
[    1.628009]  [<c0251b76>] ? lock_release_holdtime.part.20+0x93/0xf8
[    1.628009]  [<c02546dd>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    1.628009]  [<c024112b>] ? parameq+0x13/0x5e
[    1.628009]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    1.628009]  [<c0241335>] ? parse_args+0x1bf/0x2f8
[    1.628009]  [<c023b738>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    1.628009]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    1.628009]  [<c09aa500>] ? do_early_param+0x78/0x78
[    1.628009]  [<c064bd70>] kernel_init+0xb/0xed
[    1.628009]  [<c02491f9>] ? schedule_tail+0xc/0x3a
[    1.628009]  [<c06596b7>] ret_from_kernel_thread+0x1b/0x28
[    1.628009]  [<c064bd65>] ? rest_init+0xb5/0xb5
[    1.628009] Code: 24 ba 81 02 00 00 b8 4c bf 76 c0 e8 e1 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 3b ea c9 ff 83 c8 ff eb 5d 8b 1d 80 73 82 c0 <8b> 43 3c 8b 53 40 e8 8e c2 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    1.628009] EIP: [<c09b20c0>] rapl_pmu_init+0x113/0x172 SS:ESP 0068:d105ded8
[    1.628009] CR2: 000000000000003c
[    1.628009] ---[ end trace 85d734e5a96a95e6 ]---
[    1.628009] swapper (1) used greatest stack depth: 5660 bytes left

/kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-30:20140725184045:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-29:20140725184042:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-5:20140725184042:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-32:20140725184047:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-7:20140725184050:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-18:20140725184047:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-32:20140725184046:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-8:20140725184104:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-21:20140725184113:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-29:20140725184113:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-1:20140725184125:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-8:20140725184120:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-quantal-kbuild-21:20140725184131:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-11:20140725184134:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-18:20140725184133:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-20:20140725184141:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 /kernel/i386-randconfig-ib1-07251153/ba1ddf42f3c3af111d3adee277534f73c1ef6a9b/dmesg-yocto-kbuild-8:20140725184140:i386-randconfig-ib1-07251153:3.12.0-05739-gba1ddf4:9 0:17:15 all_good:bad:all_bad boots

Bisecting: 18 revisions left to test after this (roughly 4 steps)
[a8b4c7014cadfdacd4e1f4c963128593be6f20de] perf completion: Rename file to reflect zsh support
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:a8b4c7014cadfdacd4e1f4c963128593be6f20de:bisect-linux-9

2014-07-25-18:43:45 a8b4c7014cadfdacd4e1f4c963128593be6f20de compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-a8b4c7014cadfdacd4e1f4c963128593be6f20de Check for kernel in /kernel/i386-randconfig-ib1-07251153/a8b4c7014cadfdacd4e1f4c963128593be6f20de
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-a8b4c7014cadfdacd4e1f4c963128593be6f20de waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/i386-randconfig-ib1-07251153-a8b4c7014cadfdacd4e1f4c963128593be6f20de
kernel: /kernel/i386-randconfig-ib1-07251153/a8b4c7014cadfdacd4e1f4c963128593be6f20de/vmlinuz-3.12.0-05720-ga8b4c701

2014-07-25-18:48:45 detecting boot state . TEST FAILURE

[    0.801797] PCI: CLS 0 bytes, default 64
[    0.803135] Unpacking initramfs...
[    0.969857] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.971413] BUG: unable to handle kernel NULL pointer dereference at 0000003c
[    0.972010] IP: [<c09b20c0>] rapl_pmu_init+0x113/0x172
[    0.972010] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.972010] Oops: 0000 [#1] PREEMPT 
[    0.972010] Modules linked in:
[    0.972010] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05720-ga8b4c701 #10
[    0.972010] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.972010] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.972010] EIP: 0060:[<c09b20c0>] EFLAGS: 00010246 CPU: 0
[    0.972010] EIP is at rapl_pmu_init+0x113/0x172
[    0.972010] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.972010] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fed8
[    0.972010]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.972010] CR0: 80050033 CR2: 0000003c CR3: 00a16000 CR4: 000406b0
[    0.972010] Stack:
[    0.972010]  c09b000c d254d498 c081fa94 d254ec40 c0766ec8 00000002 c04ddb1e 00000000
[    0.972010]  c09b1fad 000000cc d244ff74 c0200477 c0251b76 d244ff2c c02546dd d3ff63cd
[    0.972010]  d244ff34 c024112b d3ff63cd d244ff00 c09aa512 c080d73c 000000cc d244ff74
[    0.972010] Call Trace:
[    0.972010]  [<c09b000c>] ? cache_sysfs_init+0x1dd/0x1e7
[    0.972010]  [<c04ddb1e>] ? register_syscore_ops+0x32/0x35
[    0.972010]  [<c09b1fad>] ? intel_uncore_init+0x251/0x251
[    0.972010]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.972010]  [<c0251b76>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.972010]  [<c02546dd>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.972010]  [<c024112b>] ? parameq+0x13/0x5e
[    0.972010]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.972010]  [<c0241335>] ? parse_args+0x1bf/0x2f8
[    0.972010]  [<c023b738>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.972010]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.972010]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.972010]  [<c064bd70>] kernel_init+0xb/0xed
[    0.972010]  [<c02491f9>] ? schedule_tail+0xc/0x3a
[    0.972010]  [<c06596b7>] ret_from_kernel_thread+0x1b/0x28
[    0.972010]  [<c064bd65>] ? rest_init+0xb5/0xb5
[    0.972010] Code: 24 ba 81 02 00 00 b8 4c bf 76 c0 e8 e1 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 3b ea c9 ff 83 c8 ff eb 5d 8b 1d 80 73 82 c0 <8b> 43 3c 8b 53 40 e8 8e c2 87 ff 89 d6 b9 e8 03 00 00 f7 e9 89
[    0.972010] EIP: [<c09b20c0>] rapl_pmu_init+0x113/0x172 SS:ESP 0068:d244fed8
[    0.972010] CR2: 000000000000003c
[    0.972010] ---[ end trace 347ceb65f785c5fc ]---
[    0.972010] swapper (1) used greatest stack depth: 5676 bytes left

/kernel/i386-randconfig-ib1-07251153/a8b4c7014cadfdacd4e1f4c963128593be6f20de/dmesg-yocto-kbuild-13:20140725184704:i386-randconfig-ib1-07251153:3.12.0-05720-ga8b4c701:10 /kernel/i386-randconfig-ib1-07251153/a8b4c7014cadfdacd4e1f4c963128593be6f20de/dmesg-yocto-kbuild-6:20140725184703:i386-randconfig-ib1-07251153:3.12.0-05720-ga8b4c701:10 0:2:2 all_good:bad:all_bad boots

Bisecting: 8 revisions left to test after this (roughly 3 steps)
[4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:4788e5b4b2338f85fa42a712a182d8afd65d7c58:bisect-linux-9

2014-07-25-18:49:18 4788e5b4b2338f85fa42a712a182d8afd65d7c58 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-4788e5b4b2338f85fa42a712a182d8afd65d7c58 Check for kernel in /kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-4788e5b4b2338f85fa42a712a182d8afd65d7c58 waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/i386-randconfig-ib1-07251153-4788e5b4b2338f85fa42a712a182d8afd65d7c58
kernel: /kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58/vmlinuz-3.12.0-05711-g4788e5b

2014-07-25-18:53:18 detecting boot state . TEST FAILURE

[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.736012] Oops: 0000 [#1] PREEMPT 
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

/kernel/i386-randconfig-ib1-07251153/4788e5b4b2338f85fa42a712a182d8afd65d7c58/dmesg-yocto-kbuild-7:20140725185135:i386-randconfig-ib1-07251153:3.12.0-05711-g4788e5b:11 0:1:1 all_good:bad:all_bad boots

Bisecting: 4 revisions left to test after this (roughly 2 steps)
[c912dae60ae6f659455f239298110adc67a5f3e9] uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:c912dae60ae6f659455f239298110adc67a5f3e9:bisect-linux-9

2014-07-25-18:53:53 c912dae60ae6f659455f239298110adc67a5f3e9 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-c912dae60ae6f659455f239298110adc67a5f3e9 Check for kernel in /kernel/i386-randconfig-ib1-07251153/c912dae60ae6f659455f239298110adc67a5f3e9 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-c912dae60ae6f659455f239298110adc67a5f3e9
kernel: /kernel/i386-randconfig-ib1-07251153/c912dae60ae6f659455f239298110adc67a5f3e9/vmlinuz-3.12.0-00319-gc912dae

2014-07-25-18:55:53 detecting boot state . 1 7 12 15 18 22 26 29 34 37. 38 40 44 45 48 51 53 55 56 57. 60 69 85 86 88 93 100 105 106 127 131 133 153 163 164 170 180 191 194 209 217 225 233 254 277 293 316 322 335 347 357 398 405 410 421 442 467 487 502 513 559 594 618 665 692 724 739 754 779 817 865 884 900 SUCCESS

Bisecting: 2 revisions left to test after this (roughly 1 step)
[09897d78dbc3a544426f2272b5601c62922ccab9] Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:09897d78dbc3a544426f2272b5601c62922ccab9:bisect-linux-9

2014-07-25-19:34:03 09897d78dbc3a544426f2272b5601c62922ccab9 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-09897d78dbc3a544426f2272b5601c62922ccab9 Check for kernel in /kernel/i386-randconfig-ib1-07251153/09897d78dbc3a544426f2272b5601c62922ccab9 waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-09897d78dbc3a544426f2272b5601c62922ccab9
kernel: /kernel/i386-randconfig-ib1-07251153/09897d78dbc3a544426f2272b5601c62922ccab9/vmlinuz-3.12.0-05708-g09897d7

2014-07-25-19:36:03 detecting boot state .. 31 35 83 145 187 271 304 320 407 431 564 718 806 900 SUCCESS

Bisecting: 0 revisions left to test after this (roughly 1 step)
[410136f5dd96b6013fe6d1011b523b1c247e1ccb] tools/perf/stat: Add event unit and scale support
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-9/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:410136f5dd96b6013fe6d1011b523b1c247e1ccb:bisect-linux-9

2014-07-25-19:44:09 410136f5dd96b6013fe6d1011b523b1c247e1ccb compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-410136f5dd96b6013fe6d1011b523b1c247e1ccb Check for kernel in /kernel/i386-randconfig-ib1-07251153/410136f5dd96b6013fe6d1011b523b1c247e1ccb waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-410136f5dd96b6013fe6d1011b523b1c247e1ccb
kernel: /kernel/i386-randconfig-ib1-07251153/410136f5dd96b6013fe6d1011b523b1c247e1ccb/vmlinuz-3.12.0-05710-g410136f

2014-07-25-19:46:09 detecting boot state 273 311 417 480 531 583 646 745 833 869 882 899 900 SUCCESS

4788e5b4b2338f85fa42a712a182d8afd65d7c58 is the first bad commit commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author: Stephane Eranian <[email protected]>
Date:   Tue Nov 12 17:58:50 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

:040000 040000 9980b2b25668cc94a164e8b37cf1b418f0a3d3cb a16ab4855135c87b2248924449280644fe0dcd65 M arch
bisect run success
HEAD is now at 410136f... tools/perf/stat: Add event unit and scale support
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:410136f5dd96b6013fe6d1011b523b1c247e1ccb:bisect-linux-9

2014-07-25-19:52:58 410136f5dd96b6013fe6d1011b523b1c247e1ccb reuse /kernel/i386-randconfig-ib1-07251153/410136f5dd96b6013fe6d1011b523b1c247e1ccb/vmlinuz-3.12.0-05710-g410136f

2014-07-25-19:52:58 detecting boot state .. 928 968 975 1000 SUCCESS

Previous HEAD position was 410136f... tools/perf/stat: Add event unit and scale support
HEAD is now at 1a58d99... Add linux-next specific files for 20140724
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:1a58d9909611972fd1c081bb04a9f7dc2571e612:bisect-linux-9
TEST FAILURE

[    0.626566] PCI: CLS 0 bytes, default 64
[    0.628050] Unpacking initramfs...
[    0.632409] Initramfs unpacking failed: junk in compressed archive
[    0.635014] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.636946] IP: [<d1c52d71>] validate_chain.isra.37+0xc5/0x10e5
[    0.638357] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.638357] Oops: 0000 [#1] PREEMPT 
[    0.638357] Modules linked in:
[    0.638357] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-next-20140724 #89
[    0.638357] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.638357] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.638357] EIP: 0060:[<d1c52d71>] EFLAGS: 00010086 CPU: 0
[    0.638357] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.638357] EAX: 00000000 EBX: 0000000e ECX: 00000000 EDX: fffffffc
[    0.638357] ESI: d044a4f4 EDI: d2883348 EBP: d044dd6c ESP: d044dd08
[    0.638357]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.638357] CR0: 8005003b CR2: 0000000c CR3: 12467000 CR4: 000006b0
[    0.638357] Stack:
[    0.638357]  0000000e d044dd14 d1c243ae d044dd1c d1c07d05 d044dd48 d28a27e0 d044a4f4
[    0.638357]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 0000000e
[    0.638357]  d044dd64 d1c489f8 25d94f2b 00000000 00000000 d044a010 0000000e d044a010
[    0.638357] Call Trace:
[    0.638357]  [<d1c243ae>] ? kvm_clock_read+0x13/0x24
[    0.638357]  [<d1c07d05>] ? sched_clock+0x8/0xb
[    0.638357]  [<d1c489f8>] ? sched_clock_cpu+0xb1/0xd0
[    0.638357]  [<d1c54cf2>] __lock_acquire+0x350/0xaa5
[    0.638357]  [<d1c243ae>] ? kvm_clock_read+0x13/0x24
[    0.638357]  [<d1c07d05>] ? sched_clock+0x8/0xb
[    0.638357]  [<d1c24e2e>] ? pvclock_clocksource_read+0xbb/0x149
[    0.638357]  [<d1c55b97>] lock_acquire+0x77/0x92
[    0.638357]  [<d1c9324f>] ? free_pcppages_bulk+0x1f/0x30b
[    0.638357]  [<d208e83c>] _raw_spin_lock+0x3c/0x69
[    0.638357]  [<d1c9324f>] ? free_pcppages_bulk+0x1f/0x30b
[    0.638357]  [<d1c9324f>] free_pcppages_bulk+0x1f/0x30b
[    0.638357]  [<d1c92018>] ? free_pages_prepare+0xc1/0xea
[    0.638357]  [<d1c936e8>] free_hot_cold_page+0x123/0x164
[    0.638357]  [<d1c9373c>] __free_pages.part.74+0x13/0x18
[    0.638357]  [<d1c9374f>] __free_pages+0xe/0x10
[    0.638357]  [<d1c937b0>] free_reserved_area+0x5f/0xdc
[    0.638357]  [<d1c27ca1>] ? set_memory_rw+0x48/0x4a
[    0.638357]  [<d1c250f0>] free_init_pages+0x5b/0x7e
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d2406bd3>] free_initrd_mem+0x26/0x2a
[    0.638357]  [<d23f9e67>] populate_rootfs+0xd7/0xf9
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d1c54658>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.638357]  [<d1c41d8a>] ? parameq+0x13/0x5e
[    0.638357]  [<d23f859b>] ? repair_env_string+0x12/0x51
[    0.638357]  [<d1c41fbe>] ? parse_args+0x1e9/0x319
[    0.638357]  [<d1c3c5ca>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.638357]  [<d23f8d09>] kernel_init_freeable+0xde/0x178
[    0.638357]  [<d23f8589>] ? initcall_blacklist+0x81/0x81
[    0.638357]  [<d20830d0>] kernel_init+0xb/0xc7
[    0.638357]  [<d1c46f06>] ? schedule_tail+0xc/0x3a
[    0.638357]  [<d208f640>] ret_from_kernel_thread+0x20/0x30
[    0.638357]  [<d20830c5>] ? rest_init+0xb5/0xb5
[    0.638357] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.638357] EIP: [<d1c52d71>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd08
[    0.638357] CR2: 000000000000000c
[    0.638357] ---[ end trace af9f92549db6e569 ]---
[    0.638357] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/1a58d9909611972fd1c081bb04a9f7dc2571e612/dmesg-quantal-ivb42-98:20140725122403:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/1a58d9909611972fd1c081bb04a9f7dc2571e612/dmesg-quantal-vp-25:20140725115513:i386-randconfig-ib1-07251153:3.16.0-rc6-next-20140724:89 78:2:3 all_good:bad:all_bad boots

HEAD is now at 1a58d99 Add linux-next specific files for 20140724

========= linus/master =========
Previous HEAD position was 1a58d99... Add linux-next specific files for 20140724
HEAD is now at 82e13c7... Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/linus:master:82e13c71bc655b6dc7110da4e164079dadb44892:bisect-linux-9

2014-07-25-19:58:28 82e13c71bc655b6dc7110da4e164079dadb44892 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-82e13c71bc655b6dc7110da4e164079dadb44892 Check for kernel in /kernel/i386-randconfig-ib1-07251153/82e13c71bc655b6dc7110da4e164079dadb44892
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-82e13c71bc655b6dc7110da4e164079dadb44892 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-82e13c71bc655b6dc7110da4e164079dadb44892
kernel: /kernel/i386-randconfig-ib1-07251153/82e13c71bc655b6dc7110da4e164079dadb44892/vmlinuz-3.16.0-rc6-00118-g82e13c7

2014-07-25-20:04:29 detecting boot state . 25 38 186 410 448 TEST FAILURE

[    0.744915] PCI: CLS 0 bytes, default 64
[    0.746450] Unpacking initramfs...
[    0.750668] Initramfs unpacking failed: junk in compressed archive
[    0.753238] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.755164] IP: [<d1c57921>] validate_chain.isra.37+0xc5/0x10e5
[    0.756713] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.756713] Oops: 0000 [#1] PREEMPT 
[    0.756713] Modules linked in:
[    0.756713] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-00118-g82e13c7 #5
[    0.756713] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.756713] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.756713] EIP: 0060:[<d1c57921>] EFLAGS: 00010082 CPU: 0
[    0.756713] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.756713] EAX: 00000000 EBX: 00000085 ECX: 00000000 EDX: fffffffc
[    0.756713] ESI: d044a4f8 EDI: d285bc08 EBP: d044ddd8 ESP: d044dd74
[    0.756713]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.756713] CR0: 8005003b CR2: 0000000c CR3: 1245b000 CR4: 000006b0
[    0.756713] Stack:
[    0.756713]  00000085 d044dd80 d1c23eee d044dd88 d1c07d25 d044ddb4 d28a0fb0 d044a4f8
[    0.756713]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 00000085
[    0.756713]  d044ddd0 d1c4d5d8 2ce53f19 00000000 00000000 d044a010 00000085 d044a010
[    0.756713] Call Trace:
[    0.756713]  [<d1c23eee>] ? kvm_clock_read+0x13/0x24
[    0.756713]  [<d1c07d25>] ? sched_clock+0x8/0xb
[    0.756713]  [<d1c4d5d8>] ? sched_clock_cpu+0xb1/0xd0
[    0.756713]  [<d1c598a2>] __lock_acquire+0x350/0xaa5
[    0.756713]  [<d1c5a747>] lock_acquire+0x77/0x92
[    0.756713]  [<d1c8e698>] ? adjust_managed_page_count+0x13/0x4a
[    0.756713]  [<d208677c>] _raw_spin_lock+0x3c/0x69
[    0.756713]  [<d1c8e698>] ? adjust_managed_page_count+0x13/0x4a
[    0.756713]  [<d1c8e698>] adjust_managed_page_count+0x13/0x4a
[    0.756713]  [<d1c91ad2>] free_reserved_area+0x6b/0xdc
[    0.756713]  [<d1c277e1>] ? set_memory_rw+0x48/0x4a
[    0.756713]  [<d1c24c30>] free_init_pages+0x5b/0x7e
[    0.756713]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.756713]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.756713]  [<d23fb86c>] free_initrd_mem+0x26/0x2a
[    0.756713]  [<d23eedbd>] populate_rootfs+0xd7/0xf9
[    0.756713]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.756713]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.756713]  [<d23eece6>] ? maybe_link.part.2+0xe4/0xe4
[    0.756713]  [<d1c431eb>] ? parameq+0x13/0x5e
[    0.756713]  [<d23ed59b>] ? repair_env_string+0x12/0x51
[    0.756713]  [<d1c4341e>] ? parse_args+0x1e8/0x318
[    0.756713]  [<d1c3d96a>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.756713]  [<d23edce7>] kernel_init_freeable+0xde/0x178
[    0.756713]  [<d23ed589>] ? initcall_blacklist+0x81/0x81
[    0.756713]  [<d207ad20>] kernel_init+0xb/0xc7
[    0.756713]  [<d1c4bade>] ? schedule_tail+0xc/0x3a
[    0.756713]  [<d2087540>] ret_from_kernel_thread+0x20/0x30
[    0.756713]  [<d207ad15>] ? rest_init+0xb5/0xb5
[    0.756713] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.756713] EIP: [<d1c57921>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd74
[    0.756713] CR2: 000000000000000c
[    0.756713] ---[ end trace efa70c52c30913c3 ]---
[    0.756713] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/82e13c71bc655b6dc7110da4e164079dadb44892/dmesg-quantal-ivb44-53:20140725200113:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/82e13c71bc655b6dc7110da4e164079dadb44892/dmesg-quantal-ivb44-111:20140725200122:i386-randconfig-ib1-07251153::
440:2:10 all_good:bad:all_bad boots

========= next/master =========
From git://gitmirror/next

 + 218e59c...8009dc9 akpm       -> next/akpm  (forced update)
 + d1a83f2...4d19543 akpm-base  -> next/akpm-base  (forced update)
 + 1a58d99...5a7439e master     -> next/master  (forced update)
   b292d6b..82e13c7  stable     -> next/stable

From git://gitmirror/next
* [new tag] next-20140725 -> next-20140725
Previous HEAD position was 82e13c7... Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
HEAD is now at 5a7439e... Add linux-next specific files for 20140725
ls -a /kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:5a7439efd1c5c416f768fc550048ca130cf4bf99:bisect-linux-9

2014-07-25-20:07:42 5a7439efd1c5c416f768fc550048ca130cf4bf99 compiling
Queued build task to /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-5a7439efd1c5c416f768fc550048ca130cf4bf99 Check for kernel in /kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99
waiting for completion of /kbuild-tests/build-queue/i386-randconfig-ib1-07251153-5a7439efd1c5c416f768fc550048ca130cf4bf99 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/i386-randconfig-ib1-07251153-5a7439efd1c5c416f768fc550048ca130cf4bf99
kernel: /kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/vmlinuz-3.16.0-rc6-next-20140725

2014-07-25-20:13:42 detecting boot state 2 TEST FAILURE

[    0.645139] PCI: CLS 0 bytes, default 64
[    0.646405] Unpacking initramfs...
[    0.650600] Initramfs unpacking failed: junk in compressed archive
[    0.652910] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.654551] IP: [<d1c52d81>] validate_chain.isra.37+0xc5/0x10e5
[    0.655922] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.656235] Oops: 0000 [#1] PREEMPT 
[    0.656235] Modules linked in:
[    0.656235] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-next-20140725 #6
[    0.656235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.656235] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.656235] EIP: 0060:[<d1c52d81>] EFLAGS: 00010086 CPU: 0
[    0.656235] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.656235] EAX: 00000000 EBX: 0000000e ECX: 00000000 EDX: fffffffc
[    0.656235] ESI: d044a4f4 EDI: d2883348 EBP: d044dd6c ESP: d044dd08
[    0.656235]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.656235] CR0: 8005003b CR2: 0000000c CR3: 12467000 CR4: 000006b0
[    0.656235] Stack:
[    0.656235]  0000000e d044dd14 d1c243ae d044dd1c d1c07d05 d044dd48 d28a27e0 d044a4f4
[    0.656235]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 0000000e
[    0.656235]  d044dd64 d1c48a08 26ea6699 00000000 00000000 d044a010 0000000e d044a010
[    0.656235] Call Trace:
[    0.656235]  [<d1c243ae>] ? kvm_clock_read+0x13/0x24
[    0.656235]  [<d1c07d05>] ? sched_clock+0x8/0xb
[    0.656235]  [<d1c48a08>] ? sched_clock_cpu+0xb1/0xd0
[    0.656235]  [<d1c54d02>] __lock_acquire+0x350/0xaa5
[    0.656235]  [<d1c243ae>] ? kvm_clock_read+0x13/0x24
[    0.656235]  [<d1c07d05>] ? sched_clock+0x8/0xb
[    0.656235]  [<d1c24e2e>] ? pvclock_clocksource_read+0xbb/0x149
[    0.656235]  [<d1c55ba7>] lock_acquire+0x77/0x92
[    0.656235]  [<d1c944af>] ? free_pcppages_bulk+0x1f/0x30b
[    0.656235]  [<d208e7cc>] _raw_spin_lock+0x3c/0x69
[    0.656235]  [<d1c944af>] ? free_pcppages_bulk+0x1f/0x30b
[    0.656235]  [<d1c944af>] free_pcppages_bulk+0x1f/0x30b
[    0.656235]  [<d1c93278>] ? free_pages_prepare+0xc1/0xea
[    0.656235]  [<d1c94948>] free_hot_cold_page+0x123/0x164
[    0.656235]  [<d1c9499c>] __free_pages.part.74+0x13/0x18
[    0.656235]  [<d1c949af>] __free_pages+0xe/0x10
[    0.656235]  [<d1c94a10>] free_reserved_area+0x5f/0xdc
[    0.656235]  [<d1c27ca1>] ? set_memory_rw+0x48/0x4a
[    0.656235]  [<d1c250f0>] free_init_pages+0x5b/0x7e
[    0.656235]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.656235]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.656235]  [<d2406bd3>] free_initrd_mem+0x26/0x2a
[    0.656235]  [<d23f9e67>] populate_rootfs+0xd7/0xf9
[    0.656235]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.656235]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.656235]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.656235]  [<d1c54668>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.656235]  [<d1c41d9a>] ? parameq+0x13/0x5e
[    0.656235]  [<d23f859b>] ? repair_env_string+0x12/0x51
[    0.656235]  [<d1c41fce>] ? parse_args+0x1e9/0x319
[    0.656235]  [<d1c3c5da>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.656235]  [<d23f8d09>] kernel_init_freeable+0xde/0x178
[    0.656235]  [<d23f8589>] ? initcall_blacklist+0x81/0x81
[    0.656235]  [<d2083060>] kernel_init+0xb/0xc7
[    0.656235]  [<d1c46f16>] ? schedule_tail+0xc/0x3a
[    0.656235]  [<d208f5c0>] ret_from_kernel_thread+0x20/0x30
[    0.656235]  [<d2083055>] ? rest_init+0xb5/0xb5
[    0.656235] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.656235] EIP: [<d1c52d81>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd08
[    0.656235] CR2: 000000000000000c
[    0.656235] ---[ end trace ad93b19936520903 ]---
[    0.656235] note: swapper[1] exited with preempt_count 1

/kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/dmesg-quantal-ivb44-31:20140725200724:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/dmesg-quantal-vp-14:20140725201354:i386-randconfig-ib1-07251153:3.16.0-rc6-next-20140725:6 /kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/dmesg-quantal-ivb44-68:20140725200750:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/dmesg-quantal-ivb44-89:20140725200743:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/dmesg-quantal-ivb44-103:20140725200758:i386-randconfig-ib1-07251153::
/kernel/i386-randconfig-ib1-07251153/5a7439efd1c5c416f768fc550048ca130cf4bf99/dmesg-quantal-ivb44-60:20140725200817:i386-randconfig-ib1-07251153::
2:6:6 all_good:bad:all_bad boots

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.12.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_CMDLINE_PARSER=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not set
CONFIG_X86_LOCAL_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=m
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_ZBUD is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
CONFIG_GEOS=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not set CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m
# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m
# CONFIG_TCP_CONG_HYBLA is not set CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=y CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m
# CONFIG_INET6_ESP is not set CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_VTI=m
# CONFIG_IPV6_SIT is not set CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set CONFIG_ATM_BR2684=y CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
# CONFIG_LTPC is not set
# CONFIG_COPS is not set
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=y
CONFIG_IEEE802154=y CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set CONFIG_VSOCKETS=y
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set CONFIG_NET_MPLS_GSO=m
CONFIG_HSR=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=m

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_LEDS is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_PCH_CAN is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCMCIA=m
# CONFIG_CAN_EMS_PCI is not set
# CONFIG_CAN_PEAK_PCMCIA is not set
# CONFIG_CAN_PEAK_PCI is not set
# CONFIG_CAN_KVASER_PCI is not set
# CONFIG_CAN_PLX_PCI is not set
CONFIG_CAN_TSCAN1=m
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
CONFIG_CAN_SOFTING=m
# CONFIG_CAN_SOFTING_CS is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#

#
# FIR device drivers
#
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=m
CONFIG_BT=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIDTL1=m
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=m
# CONFIG_BT_WILINK is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMA_SIZE_SEL_MIN=y
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7

#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=m
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=m
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
# CONFIG_BMP085_I2C is not set
CONFIG_BMP085_SPI=y
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=y
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline #
CONFIG_TI_ST=y
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
# CONFIG_IDE_GD_ATA is not set
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=m

#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters #
# CONFIG_BLK_DEV_4DRIVES is not set CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
# CONFIG_PCMCIA_QLOGIC is not set
CONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_NETDEVICES is not set
CONFIG_VHOST_NET=y
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=y
CONFIG_VHOST=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_N_GSM=y
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set CONFIG_SERIAL_8250_ACCENT=m CONFIG_SERIAL_8250_BOCA=y
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set CONFIG_SERIAL_8250_HUB6=m CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DW=m

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
CONFIG_SERIAL_IFX6X60=y
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=m
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_CBUS_GPIO=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_ELEKTOR=m
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_SCx200_I2C is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=m
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_SC18IS602=m
# CONFIG_SPI_TOPCLIFF_PCH is not set
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=y
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
# CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=m
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_F7188X=m
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_GPIO_MC33880=m
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=m

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_WM831X_BACKUP=m
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=m
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9052_ADC=y
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95234=m
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_MC13783_ADC=m

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_THERMAL_EMULATION=y CONFIG_INTEL_POWERCLAMP=m

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
# CONFIG_MFD_CROS_EC_SPI is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
# CONFIG_PCF50633_GPIO is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=m
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS6524X=m
# CONFIG_REGULATOR_WM831X is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_V4L2_INT_DEVICE=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
# CONFIG_IR_LIRC_CODEC is not set
# CONFIG_IR_NEC_DECODER is not set
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_JVC_DECODER is not set
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_RC5_SZ_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_TIMBERDALE is not set
CONFIG_SOC_CAMERA=m
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_VIDEO_RCAR_VIN is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_MEM2MEM_TESTDEV=m

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_MAXIRADIO is not set
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_TEF6862 is not set
CONFIG_RADIO_WL1273=m

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_ISA=m
# CONFIG_RADIO_CADET is not set
CONFIG_RADIO_RTRACK=m
# CONFIG_RADIO_RTRACK2 is not set
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
# CONFIG_RADIO_SF16FMI is not set
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
# CONFIG_RADIO_TRUST is not set
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_MEDIA_COMMON_OPTIONS=y

#

# common driver options
#
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y

#
# Media ancillary drivers (tuners, sensors, i2c, frontends) #
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Encoders, decoders, sensors and other helper chips #

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS5345=m
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA7191=m
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_THS8200=m

#
# Camera sensor devices
#
CONFIG_VIDEO_OV7640=m
# CONFIG_VIDEO_OV7670 is not set
CONFIG_VIDEO_VS6624=m
# CONFIG_VIDEO_MT9V011 is not set
CONFIG_VIDEO_TCM825X=m
# CONFIG_VIDEO_SR030PC30 is not set

#
# Flash devices
#

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=m
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#

#

# soc_camera sensor drivers
#
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
# CONFIG_SOC_CAMERA_MT9T112 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_OV2640 is not set
# CONFIG_SOC_CAMERA_OV5642 is not set
CONFIG_SOC_CAMERA_OV6650=m
# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_SOC_CAMERA_OV9740=m
# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_MT20XX is not set
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MT2131=m
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV6110x is not set

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_ZL10036=m
# CONFIG_DVB_ZL10039 is not set
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
# CONFIG_DVB_SI21XX is not set
CONFIG_DVB_TS2020=m
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
# CONFIG_DVB_HD29L2 is not set
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_LG2160=m
# CONFIG_DVB_S5H1409 is not set
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
# CONFIG_DVB_LNBP22 is not set
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
# CONFIG_DVB_ISL6423 is not set
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
# CONFIG_DVB_M88RS2000 is not set
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=m
CONFIG_FB_AUO_K1900=m
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_SIMPLE=y
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_MDA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set

#
# HID support
#
# CONFIG_HID is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_NET48XX is not set
CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PCA9685 is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_MC13783 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_RX4581=m

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DA9052=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_WM831X=m
# CONFIG_RTC_DRV_PCF50633 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_MC13XXX is not set
# CONFIG_RTC_DRV_MOXART is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_ECHO is not set
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_TEST=m
# CONFIG_COMEDI_PARPORT is not set
# CONFIG_COMEDI_SERIAL2002 is not set
# CONFIG_COMEDI_SKEL is not set
CONFIG_COMEDI_SSV_DNP=m
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_PCI_DRIVERS is not set
# CONFIG_COMEDI_PCMCIA_DRIVERS is not set
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_FC=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
CONFIG_SPEAKUP=y CONFIG_SPEAKUP_SYNTH_ACNTSA=y CONFIG_SPEAKUP_SYNTH_ACNTPC=y CONFIG_SPEAKUP_SYNTH_APOLLO=m CONFIG_SPEAKUP_SYNTH_AUDPTR=m
# CONFIG_SPEAKUP_SYNTH_BNS is not set CONFIG_SPEAKUP_SYNTH_DECTLK=y
# CONFIG_SPEAKUP_SYNTH_DECEXT is not set CONFIG_SPEAKUP_SYNTH_DECPC=m CONFIG_SPEAKUP_SYNTH_DTLK=y CONFIG_SPEAKUP_SYNTH_KEYPC=m CONFIG_SPEAKUP_SYNTH_LTLK=y CONFIG_SPEAKUP_SYNTH_SOFT=y CONFIG_SPEAKUP_SYNTH_SPKOUT=m CONFIG_SPEAKUP_SYNTH_TXPRT=y
# CONFIG_SPEAKUP_SYNTH_DUMMY is not set CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set CONFIG_LIRC_STAGING=y
# CONFIG_LIRC_BT829 is not set CONFIG_LIRC_PARALLEL=m CONFIG_LIRC_SERIAL=m
# CONFIG_LIRC_SERIAL_TRANSMITTER is not set # CONFIG_LIRC_SIR is not set
# CONFIG_LIRC_ZILOG is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=y
# CONFIG_ANDROID_TIMED_OUTPUT is not set
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
# CONFIG_ANDROID_INTF_ALARM_DEV is not set
# CONFIG_SYNC is not set
CONFIG_WIMAX_GDM72XX=m
CONFIG_WIMAX_GDM72XX_QOS=y
CONFIG_WIMAX_GDM72XX_K_MODE=y
# CONFIG_WIMAX_GDM72XX_WIMAX2 is not set
CONFIG_WIMAX_GDM72XX_SDIO=y
# CONFIG_DGRP is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_XILLYBUS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_CHROMEOS_LAPTOP=m
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=m
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=m
# CONFIG_FMC_TRIVIAL is not set
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=m

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_DMIID is not set
CONFIG_DMI_SYSFS=m
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_F2FS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=m
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#

# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
CONFIG_RCU_CPU_STALL_INFO=y
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAIL_MMC_REQUEST=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
CONFIG_TEST_LIST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_YAMA_STACKED=y
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_INTEGRITY_AUDIT is not set
# CONFIG_IMA is not set
CONFIG_EVM=y
CONFIG_EVM_HMAC_VERSION=2
CONFIG_DEFAULT_SECURITY_YAMA=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="yama"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER_X86=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=m
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_LGUEST=m
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_AUDIT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_FONT_SUPPORT=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#1 lore raw
Quoted 4 lines · Fengguang Wu

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

Is this booting a guest kernel or native?
What is the host CPU?

Quoted 209 lines

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author:     Stephane Eranian <[email protected]>
AuthorDate: Tue Nov 12 17:58:50 2013 +0100
Commit:     Ingo Molnar <[email protected]>
CommitDate: Wed Nov 27 11:16:40 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

+-----------------------------------------------------------+------------+------------+---------------+
|                                                           | 410136f5dd | 4788e5b4b2 | next-20140724 |
+-----------------------------------------------------------+------------+------------+---------------+
| boot_successes                                            | 1000       | 751        | 78            |
| boot_failures                                             | 0          | 149        | 3             |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference      | 0          | 132        | 2             |
| Oops                                                      | 0          | 132        | 2             |
| EIP_is_at_rapl_pmu_init                                   | 0          | 132        |               |
| Kernel_panic-not_syncing:Attempted_to_kill_init_exitcode= | 0          | 132        | 2             |
| backtrace:rapl_pmu_init                                   | 0          | 132        |               |
| backtrace:kernel_init_freeable                            | 0          | 132        | 2             |
| BUG:kernel_boot_hang                                      | 0          | 17         | 1             |
| EIP_is_at_validate_chain                                  | 0          | 0          | 2             |
| backtrace:free_reserved_area                              | 0          | 0          | 2             |
| backtrace:free_init_pages                                 | 0          | 0          | 2             |
| backtrace:populate_rootfs                                 | 0          | 0          | 2             |
+-----------------------------------------------------------+------------+------------+---------------+
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[    0.736012] Oops: 0000 [#1] PREEMPT
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

git bisect start v3.14 v3.13 --

git bisect  bad 09df7c4c8097ca4a11393b1edd4997d786daad52  # 16:18      0-      3  x86: Remove CONFIG_X86_OOSTORE
git bisect  bad 15c81026204da897a05424c79263aea861a782cc  # 16:24      2-      5  Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8  # 16:33      0-     15  Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good edde1fb8c41d0db7c8ce17fb32886da2e389b0cc  # 17:48    900+      0  Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
git bisect good a693c46e14c9fdadbcd68ddfa94a4f72495531a9  # 17:55    900+      0  Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 2cc3f16cad1561c6fc551aefff559e53726efc8b  # 18:12    900+      0  Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 9326657abe1a83ed4b4f396b923ca1217fd50cba  # 18:21      9-      2  Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 7bb73553e2490ac6667387ee723e0faa61e9d999  # 18:38      0-      1  tools lib traceevent: Get rid of die() in reparent_op_arg()
git bisect  bad 3d7c0144491bd8c21d53b43032274a85efdfe434  # 18:41     11-      4  perf tools: Add build and install plugins targets
git bisect  bad ba1ddf42f3c3af111d3adee277534f73c1ef6a9b  # 18:43      0-     15  perf script: Print mmap[2] events also
git bisect  bad a8b4c7014cadfdacd4e1f4c963128593be6f20de  # 18:49      0-      2  perf completion: Rename file to reflect zsh support
git bisect  bad 4788e5b4b2338f85fa42a712a182d8afd65d7c58  # 18:53      0-      1  perf/x86: Add Intel RAPL PMU support
git bisect good c912dae60ae6f659455f239298110adc67a5f3e9  # 19:33    900+     14  uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
git bisect good 09897d78dbc3a544426f2272b5601c62922ccab9  # 19:44    900+      0  Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:52    900+      0  tools/perf/stat: Add event unit and scale support
# first bad commit: [4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:56   1000+      0  tools/perf/stat: Add event unit and scale support
git bisect  bad 1a58d9909611972fd1c081bb04a9f7dc2571e612  # 19:58      0-      3  Add linux-next specific files for 20140724
git bisect  bad 82e13c71bc655b6dc7110da4e164079dadb44892  # 20:07    448-     10  Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
git bisect  bad 5a7439efd1c5c416f768fc550048ca130cf4bf99  # 20:14      2-      6  Add linux-next specific files for 20140725

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-i386.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(

        qemu-system-x86_64
        -enable-kvm
        -cpu Haswell,+smep,+smap
        -kernel $kernel
        -initrd $initrd
        -m 320
        -smp 1
        -net nic,vlan=1,model=e1000
        -net user,vlan=1
        -boot order=nc
        -no-reboot
        -watchdog i6300esb
        -rtc base=localtime
        -serial stdio
        -display none
        -monitor null

)

append=(

        hung_task_panic=1
        earlyprintk=ttyS0,115200
        debug
        apic=debug
        sysrq_always_enabled
        rcupdate.rcu_cpu_stall_timeout=100
        panic=10
        softlockup_panic=1
        nmi_watchdog=panic
        prompt_ramdisk=0
        console=ttyS0,115200
        console=tty0
        vga=normal
        root=/dev/ram0
        rw
        drbd.minor_count=8

)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Thanks,
Fengguang

_______________________________________________
LKP mailing list
LKP(a)linux.intel.com

#2 lore raw
Quoted 6 lines · Stephane Eranian
Quoted 4 lines · Fengguang Wu

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

Is this booting a guest kernel or native?

It's a guest kernel.

Quoted 1 line

What is the host CPU?

The host CPU is E5-2680, Sandy Bridge-EP.

Thanks,
Fengguang

Quoted 209 lines
Quoted 209 lines

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author:     Stephane Eranian <[email protected]>
AuthorDate: Tue Nov 12 17:58:50 2013 +0100
Commit:     Ingo Molnar <[email protected]>
CommitDate: Wed Nov 27 11:16:40 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

+-----------------------------------------------------------+------------+------------+---------------+
|                                                           | 410136f5dd | 4788e5b4b2 | next-20140724 |
+-----------------------------------------------------------+------------+------------+---------------+
| boot_successes                                            | 1000       | 751        | 78            |
| boot_failures                                             | 0          | 149        | 3             |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference      | 0          | 132        | 2             |
| Oops                                                      | 0          | 132        | 2             |
| EIP_is_at_rapl_pmu_init                                   | 0          | 132        |               |
| Kernel_panic-not_syncing:Attempted_to_kill_init_exitcode= | 0          | 132        | 2             |
| backtrace:rapl_pmu_init                                   | 0          | 132        |               |
| backtrace:kernel_init_freeable                            | 0          | 132        | 2             |
| BUG:kernel_boot_hang                                      | 0          | 17         | 1             |
| EIP_is_at_validate_chain                                  | 0          | 0          | 2             |
| backtrace:free_reserved_area                              | 0          | 0          | 2             |
| backtrace:free_init_pages                                 | 0          | 0          | 2             |
| backtrace:populate_rootfs                                 | 0          | 0          | 2             |
+-----------------------------------------------------------+------------+------------+---------------+
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[    0.736012] Oops: 0000 [#1] PREEMPT
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

git bisect start v3.14 v3.13 --

git bisect  bad 09df7c4c8097ca4a11393b1edd4997d786daad52  # 16:18      0-      3  x86: Remove CONFIG_X86_OOSTORE
git bisect  bad 15c81026204da897a05424c79263aea861a782cc  # 16:24      2-      5  Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8  # 16:33      0-     15  Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good edde1fb8c41d0db7c8ce17fb32886da2e389b0cc  # 17:48    900+      0  Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
git bisect good a693c46e14c9fdadbcd68ddfa94a4f72495531a9  # 17:55    900+      0  Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 2cc3f16cad1561c6fc551aefff559e53726efc8b  # 18:12    900+      0  Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 9326657abe1a83ed4b4f396b923ca1217fd50cba  # 18:21      9-      2  Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 7bb73553e2490ac6667387ee723e0faa61e9d999  # 18:38      0-      1  tools lib traceevent: Get rid of die() in reparent_op_arg()
git bisect  bad 3d7c0144491bd8c21d53b43032274a85efdfe434  # 18:41     11-      4  perf tools: Add build and install plugins targets
git bisect  bad ba1ddf42f3c3af111d3adee277534f73c1ef6a9b  # 18:43      0-     15  perf script: Print mmap[2] events also
git bisect  bad a8b4c7014cadfdacd4e1f4c963128593be6f20de  # 18:49      0-      2  perf completion: Rename file to reflect zsh support
git bisect  bad 4788e5b4b2338f85fa42a712a182d8afd65d7c58  # 18:53      0-      1  perf/x86: Add Intel RAPL PMU support
git bisect good c912dae60ae6f659455f239298110adc67a5f3e9  # 19:33    900+     14  uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
git bisect good 09897d78dbc3a544426f2272b5601c62922ccab9  # 19:44    900+      0  Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:52    900+      0  tools/perf/stat: Add event unit and scale support
# first bad commit: [4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:56   1000+      0  tools/perf/stat: Add event unit and scale support
git bisect  bad 1a58d9909611972fd1c081bb04a9f7dc2571e612  # 19:58      0-      3  Add linux-next specific files for 20140724
git bisect  bad 82e13c71bc655b6dc7110da4e164079dadb44892  # 20:07    448-     10  Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
git bisect  bad 5a7439efd1c5c416f768fc550048ca130cf4bf99  # 20:14      2-      6  Add linux-next specific files for 20140725

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-i386.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(

        qemu-system-x86_64
        -enable-kvm
        -cpu Haswell,+smep,+smap
        -kernel $kernel
        -initrd $initrd
        -m 320
        -smp 1
        -net nic,vlan=1,model=e1000
        -net user,vlan=1
        -boot order=nc
        -no-reboot
        -watchdog i6300esb
        -rtc base=localtime
        -serial stdio
        -display none
        -monitor null

)

append=(

        hung_task_panic=1
        earlyprintk=ttyS0,115200
        debug
        apic=debug
        sysrq_always_enabled
        rcupdate.rcu_cpu_stall_timeout=100
        panic=10
        softlockup_panic=1
        nmi_watchdog=panic
        prompt_ramdisk=0
        console=ttyS0,115200
        console=tty0
        vga=normal
        root=/dev/ram0
        rw
        drbd.minor_count=8

)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Thanks,
Fengguang

_______________________________________________
LKP mailing list
LKP(a)linux.intel.com

#3 lore raw
Quoted 6 lines · Fengguang Wu
Quoted 5 lines · Stephane Eranian
Quoted 4 lines · Fengguang Wu

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

Quoted 8 lines
Quoted 1 line

Is this booting a guest kernel or native?

It's a guest kernel.

Quoted 1 line

What is the host CPU?

The host CPU is E5-2680, Sandy Bridge-EP.

I thought this problem had already be mentioned a while back.

See https://lkml.org/lkml/2014/3/6/685
And https://lkml.org/lkml/2014/4/23/512

So what you are telling here is that those two fixes never made it or that you are
running an older kernel.

Quoted 212 lines

Thanks,
Fengguang

Quoted 209 lines
Quoted 209 lines

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author:     Stephane Eranian <[email protected]>
AuthorDate: Tue Nov 12 17:58:50 2013 +0100
Commit:     Ingo Molnar <[email protected]>
CommitDate: Wed Nov 27 11:16:40 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

+-----------------------------------------------------------+------------+------------+---------------+
|                                                           | 410136f5dd | 4788e5b4b2 | next-20140724 |
+-----------------------------------------------------------+------------+------------+---------------+
| boot_successes                                            | 1000       | 751        | 78            |
| boot_failures                                             | 0          | 149        | 3             |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference      | 0          | 132        | 2             |
| Oops                                                      | 0          | 132        | 2             |
| EIP_is_at_rapl_pmu_init                                   | 0          | 132        |               |
| Kernel_panic-not_syncing:Attempted_to_kill_init_exitcode= | 0          | 132        | 2             |
| backtrace:rapl_pmu_init                                   | 0          | 132        |               |
| backtrace:kernel_init_freeable                            | 0          | 132        | 2             |
| BUG:kernel_boot_hang                                      | 0          | 17         | 1             |
| EIP_is_at_validate_chain                                  | 0          | 0          | 2             |
| backtrace:free_reserved_area                              | 0          | 0          | 2             |
| backtrace:free_init_pages                                 | 0          | 0          | 2             |
| backtrace:populate_rootfs                                 | 0          | 0          | 2             |
+-----------------------------------------------------------+------------+------------+---------------+
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[    0.736012] Oops: 0000 [#1] PREEMPT
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

git bisect start v3.14 v3.13 --

git bisect  bad 09df7c4c8097ca4a11393b1edd4997d786daad52  # 16:18      0-      3  x86: Remove CONFIG_X86_OOSTORE
git bisect  bad 15c81026204da897a05424c79263aea861a782cc  # 16:24      2-      5  Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8  # 16:33      0-     15  Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good edde1fb8c41d0db7c8ce17fb32886da2e389b0cc  # 17:48    900+      0  Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
git bisect good a693c46e14c9fdadbcd68ddfa94a4f72495531a9  # 17:55    900+      0  Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 2cc3f16cad1561c6fc551aefff559e53726efc8b  # 18:12    900+      0  Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 9326657abe1a83ed4b4f396b923ca1217fd50cba  # 18:21      9-      2  Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 7bb73553e2490ac6667387ee723e0faa61e9d999  # 18:38      0-      1  tools lib traceevent: Get rid of die() in reparent_op_arg()
git bisect  bad 3d7c0144491bd8c21d53b43032274a85efdfe434  # 18:41     11-      4  perf tools: Add build and install plugins targets
git bisect  bad ba1ddf42f3c3af111d3adee277534f73c1ef6a9b  # 18:43      0-     15  perf script: Print mmap[2] events also
git bisect  bad a8b4c7014cadfdacd4e1f4c963128593be6f20de  # 18:49      0-      2  perf completion: Rename file to reflect zsh support
git bisect  bad 4788e5b4b2338f85fa42a712a182d8afd65d7c58  # 18:53      0-      1  perf/x86: Add Intel RAPL PMU support
git bisect good c912dae60ae6f659455f239298110adc67a5f3e9  # 19:33    900+     14  uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
git bisect good 09897d78dbc3a544426f2272b5601c62922ccab9  # 19:44    900+      0  Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:52    900+      0  tools/perf/stat: Add event unit and scale support
# first bad commit: [4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:56   1000+      0  tools/perf/stat: Add event unit and scale support
git bisect  bad 1a58d9909611972fd1c081bb04a9f7dc2571e612  # 19:58      0-      3  Add linux-next specific files for 20140724
git bisect  bad 82e13c71bc655b6dc7110da4e164079dadb44892  # 20:07    448-     10  Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
git bisect  bad 5a7439efd1c5c416f768fc550048ca130cf4bf99  # 20:14      2-      6  Add linux-next specific files for 20140725

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-i386.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(

        qemu-system-x86_64
        -enable-kvm
        -cpu Haswell,+smep,+smap
        -kernel $kernel
        -initrd $initrd
        -m 320
        -smp 1
        -net nic,vlan=1,model=e1000
        -net user,vlan=1
        -boot order=nc
        -no-reboot
        -watchdog i6300esb
        -rtc base=localtime
        -serial stdio
        -display none
        -monitor null

)

append=(

        hung_task_panic=1
        earlyprintk=ttyS0,115200
        debug
        apic=debug
        sysrq_always_enabled
        rcupdate.rcu_cpu_stall_timeout=100
        panic=10
        softlockup_panic=1
        nmi_watchdog=panic
        prompt_ramdisk=0
        console=ttyS0,115200
        console=tty0
        vga=normal
        root=/dev/ram0
        rw
        drbd.minor_count=8

)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Thanks,
Fengguang

_______________________________________________
LKP mailing list
LKP(a)linux.intel.com

#4 lore raw

Hi Stephane,

Quoted 15 lines · Stephane Eranian
Quoted 6 lines · Fengguang Wu
Quoted 5 lines · Stephane Eranian
Quoted 4 lines · Fengguang Wu

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

Quoted 8 lines
Quoted 1 line

Is this booting a guest kernel or native?

It's a guest kernel.

Quoted 1 line

What is the host CPU?

The host CPU is E5-2680, Sandy Bridge-EP.

Quoted 8 lines

I thought this problem had already be mentioned a while back.

See https://lkml.org/lkml/2014/3/6/685
And https://lkml.org/lkml/2014/4/23/512

So what you are telling here is that those two fixes never made it or that you are
running an older kernel.

I just checked linux-next and find that the bug in rapl_pmu_init() has been fixed. linux-next happen to have the same "BUG: unable to handle kernel NULL pointer dereference" message but at another function validate_chain().. Attached is the dmesg in linux-next.

Sorry for the noise!

Thanks,
Fengguang

Quoted 202 lines
Quoted 202 lines
Quoted 202 lines
Quoted 202 lines

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author:     Stephane Eranian <[email protected]>
AuthorDate: Tue Nov 12 17:58:50 2013 +0100
Commit:     Ingo Molnar <[email protected]>
CommitDate: Wed Nov 27 11:16:40 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

+-----------------------------------------------------------+------------+------------+---------------+
|                                                           | 410136f5dd | 4788e5b4b2 | next-20140724 |
+-----------------------------------------------------------+------------+------------+---------------+
| boot_successes                                            | 1000       | 751        | 78            |
| boot_failures                                             | 0          | 149        | 3             |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference      | 0          | 132        | 2             |
| Oops                                                      | 0          | 132        | 2             |
| EIP_is_at_rapl_pmu_init                                   | 0          | 132        |               |
| Kernel_panic-not_syncing:Attempted_to_kill_init_exitcode= | 0          | 132        | 2             |
| backtrace:rapl_pmu_init                                   | 0          | 132        |               |
| backtrace:kernel_init_freeable                            | 0          | 132        | 2             |
| BUG:kernel_boot_hang                                      | 0          | 17         | 1             |
| EIP_is_at_validate_chain                                  | 0          | 0          | 2             |
| backtrace:free_reserved_area                              | 0          | 0          | 2             |
| backtrace:free_init_pages                                 | 0          | 0          | 2             |
| backtrace:populate_rootfs                                 | 0          | 0          | 2             |
+-----------------------------------------------------------+------------+------------+---------------+
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[    0.736012] Oops: 0000 [#1] PREEMPT
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

git bisect start v3.14 v3.13 --

git bisect  bad 09df7c4c8097ca4a11393b1edd4997d786daad52  # 16:18      0-      3  x86: Remove CONFIG_X86_OOSTORE
git bisect  bad 15c81026204da897a05424c79263aea861a782cc  # 16:24      2-      5  Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8  # 16:33      0-     15  Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good edde1fb8c41d0db7c8ce17fb32886da2e389b0cc  # 17:48    900+      0  Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
git bisect good a693c46e14c9fdadbcd68ddfa94a4f72495531a9  # 17:55    900+      0  Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 2cc3f16cad1561c6fc551aefff559e53726efc8b  # 18:12    900+      0  Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 9326657abe1a83ed4b4f396b923ca1217fd50cba  # 18:21      9-      2  Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 7bb73553e2490ac6667387ee723e0faa61e9d999  # 18:38      0-      1  tools lib traceevent: Get rid of die() in reparent_op_arg()
git bisect  bad 3d7c0144491bd8c21d53b43032274a85efdfe434  # 18:41     11-      4  perf tools: Add build and install plugins targets
git bisect  bad ba1ddf42f3c3af111d3adee277534f73c1ef6a9b  # 18:43      0-     15  perf script: Print mmap[2] events also
git bisect  bad a8b4c7014cadfdacd4e1f4c963128593be6f20de  # 18:49      0-      2  perf completion: Rename file to reflect zsh support
git bisect  bad 4788e5b4b2338f85fa42a712a182d8afd65d7c58  # 18:53      0-      1  perf/x86: Add Intel RAPL PMU support
git bisect good c912dae60ae6f659455f239298110adc67a5f3e9  # 19:33    900+     14  uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
git bisect good 09897d78dbc3a544426f2272b5601c62922ccab9  # 19:44    900+      0  Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:52    900+      0  tools/perf/stat: Add event unit and scale support
# first bad commit: [4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:56   1000+      0  tools/perf/stat: Add event unit and scale support
git bisect  bad 1a58d9909611972fd1c081bb04a9f7dc2571e612  # 19:58      0-      3  Add linux-next specific files for 20140724
git bisect  bad 82e13c71bc655b6dc7110da4e164079dadb44892  # 20:07    448-     10  Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
git bisect  bad 5a7439efd1c5c416f768fc550048ca130cf4bf99  # 20:14      2-      6  Add linux-next specific files for 20140725

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-i386.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(

        qemu-system-x86_64
        -enable-kvm
        -cpu Haswell,+smep,+smap
        -kernel $kernel
        -initrd $initrd
        -m 320
        -smp 1
        -net nic,vlan=1,model=e1000
        -net user,vlan=1
        -boot order=nc
        -no-reboot
        -watchdog i6300esb
        -rtc base=localtime
        -serial stdio
        -display none
        -monitor null

)

append=(

        hung_task_panic=1
        earlyprintk=ttyS0,115200
        debug
        apic=debug
        sysrq_always_enabled
        rcupdate.rcu_cpu_stall_timeout=100
        panic=10
        softlockup_panic=1
        nmi_watchdog=panic
        prompt_ramdisk=0
        console=ttyS0,115200
        console=tty0
        vga=normal
        root=/dev/ram0
        rw
        drbd.minor_count=8

)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

Thanks,
Fengguang

_______________________________________________
LKP mailing list
LKP(a)linux.intel.com

early console in setup code
early console in decompress_kernel
KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel.

[    0.000000] Linux version 3.16.0-rc6-next-20140724 (kbuild@lkp-ib03) (gcc version 4.8.2 (Debian 4.8.2-18) ) #89 PREEMPT Fri Jul 25 11:55:48 CST 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [c00f0eb0]
[    0.000000]   mpc: f0ec0-f0fa4
[    0.000000] initial memory mapped: [mem 0x00000000-0x131fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x11a00000-0x11bfffff]
[    0.000000]  [mem 0x11a00000-0x11bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x10000000-0x119fffff]
[    0.000000]  [mem 0x10000000-0x119fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x0fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x11c00000-0x13ffdfff]
[    0.000000]  [mem 0x11c00000-0x13dfffff] page 2M
[    0.000000]  [mem 0x13e00000-0x13ffdfff] page 4k
[    0.000000] cma: Reserved 16 MiB at 10800000
[    0.000000] RAMDISK: [mem 0x127ab000-0x13feffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000F0D00 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x13FFFC2A 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x13FFF1C0 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x13FFE040 001180 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x13FFE000 000040
[    0.000000] ACPI: SSDT 0x13FFF234 00093E (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x13FFFB72 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x13FFFBF2 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13ffe000
[    0.000000]   low ram: 0 - 13ffe000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x13ffdfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x13ffdfff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff]
[    0.000000] On node 0 totalpages: 81820
[    0.000000] free_area_init_node: node 0, pgdat d23f0da0, node_mem_map d197f020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77822 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: f0ec0-f0fa4
[    0.000000] MPTABLE: OEM ID: BOCHSCPU
[    0.000000] MPTABLE: Product ID: 0.1         
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 1
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 12274980
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81180
[    0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic  prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:1a58d9909611972fd1c081bb04a9f7dc2571e612:bisect-linux-9/.vmlinuz-1a58d9909611972fd1c081bb04a9f7dc2571e612-20140725121947-2-ivb42 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/1a58d9909611972fd1c081bb04a9f7dc2571e612/vmlinuz-3.16.0-rc6-next-20140724 drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 270992K/327280K available (4674K kernel code, 1662K rwdata, 1812K rodata, 432K init, 8296K bss, 56288K reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffe2000 - 0xfffff000   ( 116 kB)
[    0.000000]     vmalloc : 0xd47fe000 - 0xfffe0000   ( 695 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3ffe000   ( 319 MB)
[    0.000000]       .init : 0xd23f8000 - 0xd2464000   ( 432 kB)
[    0.000000]       .data : 0xd2090e86 - 0xd23f6a00   (3478 kB)
[    0.000000]       .text : 0xd1c00000 - 0xd2090e86   (4675 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] CPU 0 irqstacks, hard=d0408000 soft=d040a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 3.16.0-rc6-next-20140724 (kbuild@lkp-ib03) (gcc version 4.8.2 (Debian 4.8.2-18) ) #89 PREEMPT Fri Jul 25 11:55:48 CST 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [c00f0eb0]
[    0.000000]   mpc: f0ec0-f0fa4
[    0.000000] initial memory mapped: [mem 0x00000000-0x131fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x11a00000-0x11bfffff]
[    0.000000]  [mem 0x11a00000-0x11bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x10000000-0x119fffff]
[    0.000000]  [mem 0x10000000-0x119fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x0fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x11c00000-0x13ffdfff]
[    0.000000]  [mem 0x11c00000-0x13dfffff] page 2M
[    0.000000]  [mem 0x13e00000-0x13ffdfff] page 4k
[    0.000000] cma: Reserved 16 MiB at 10800000
[    0.000000] RAMDISK: [mem 0x127ab000-0x13feffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000F0D00 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x13FFFC2A 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x13FFF1C0 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x13FFE040 001180 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x13FFE000 000040
[    0.000000] ACPI: SSDT 0x13FFF234 00093E (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x13FFFB72 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x13FFFBF2 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13ffe000
[    0.000000]   low ram: 0 - 13ffe000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x13ffdfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x13ffdfff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff]
[    0.000000] On node 0 totalpages: 81820
[    0.000000] free_area_init_node: node 0, pgdat d23f0da0, node_mem_map d197f020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77822 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: f0ec0-f0fa4
[    0.000000] MPTABLE: OEM ID: BOCHSCPU
[    0.000000] MPTABLE: Product ID: 0.1         
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 1
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 12274980
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81180
[    0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic  prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:1a58d9909611972fd1c081bb04a9f7dc2571e612:bisect-linux-9/.vmlinuz-1a58d9909611972fd1c081bb04a9f7dc2571e612-20140725121947-2-ivb42 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/1a58d9909611972fd1c081bb04a9f7dc2571e612/vmlinuz-3.16.0-rc6-next-20140724 drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 270992K/327280K available (4674K kernel code, 1662K rwdata, 1812K rodata, 432K init, 8296K bss, 56288K reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffe2000 - 0xfffff000   ( 116 kB)
[    0.000000]     vmalloc : 0xd47fe000 - 0xfffe0000   ( 695 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3ffe000   ( 319 MB)
[    0.000000]       .init : 0xd23f8000 - 0xd2464000   ( 432 kB)
[    0.000000]       .data : 0xd2090e86 - 0xd23f6a00   (3478 kB)
[    0.000000]       .text : 0xd1c00000 - 0xd2090e86   (4675 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] CPU 0 irqstacks, hard=d0408000 soft=d040a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5167 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.008007] pid_max: default: 32768 minimum: 301
[    0.009113] ACPI: Core revision 20140627
[    0.013518] ACPI: All ACPI Tables successfully acquired
[    0.014878] ACPI: setting ELCR to 0200 (from 0c00)
[    0.016083] Security Framework initialized
[    0.017095] Yama: becoming mindful.
[    0.018064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.019455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.020702] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.020702] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.020702] tlb_flushall_shift: 6
[    0.024006] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[    0.030312] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.032882] Getting VERSION: 1050014
[    0.033818] Getting VERSION: 1050014
[    0.034739] Getting ID: 0
[    0.036018] Getting ID: f000000
[    0.036892] Getting LVT0: 8700
[    0.037747] Getting LVT1: 8400
[    0.038613] enabled ExtINT on CPU#0
[    0.039533] Using local APIC timer interrupts.
[    0.039533] calibrating APIC timer ...
[    0.044000] ... lapic delta = 6248994
[    0.044000] ... PM-Timer delta = 357894
[    0.044000] ... PM-Timer result ok
[    0.044000] ..... delta 6248994
[    0.044000] ..... mult: 268392248
[    0.044000] ..... calibration result: 3999356
[    0.044000] ..... CPU clock speed is 2693.0193 MHz.
[    0.044000] ..... host bus clock speed is 999.3356 MHz.
[    0.044763] evm: security.capability
[    0.046679] regulator-dummy: no parameters
[    0.048000] NET: Registered protocol family 16
[    0.048625] cpuidle: using governor ladder
[    0.049655] cpuidle: using governor menu
[    0.052004] ACPI: bus type PCI registered
[    0.053237] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.055046] PCI: PCI BIOS revision 2.10 entry at 0xfd456, last bus=0
[    0.056003] PCI: Using configuration type 1 for base access
[    0.063155] ACPI: Added _OSI(Module Device)
[    0.064005] ACPI: Added _OSI(Processor Device)
[    0.065075] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.066186] ACPI: Added _OSI(Processor Aggregator Device)
[    0.077105] ACPI: Interpreter enabled
[    0.078084] ACPI: (supports S0 S5)
[    0.078993] ACPI: Using PIC for interrupt routing
[    0.080054] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.093150] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.094502] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.095762] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.096297] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.100106] PCI host bridge to bus 0000:00
[    0.101128] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.102353] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.103680] pci_bus 0000:00: root bus resource [io  0x0d00-0xadff]
[    0.104005] pci_bus 0000:00: root bus resource [io  0xae0f-0xaeff]
[    0.105328] pci_bus 0000:00: root bus resource [io  0xaf20-0xafdf]
[    0.106658] pci_bus 0000:00: root bus resource [io  0xafe4-0xffff]
[    0.108005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.109441] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff]
[    0.110952] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.112716] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.116024] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.120006] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.122292] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.123772] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.124005] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.125476] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.128408] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.130121] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.131929] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.132458] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.136644] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.139296] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[    0.146444] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.148453] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.150734] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.152975] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.158838] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.160426] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.162254] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.167633] pci_bus 0000:00: on NUMA node 0
[    0.168949] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.170803] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.173086] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.174931] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.176985] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.179139] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.180329] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.182395] vgaarb: loaded
[    0.183199] vgaarb: bridge control possible 0000:00:02.0
[    0.184256] SCSI subsystem initialized
[    0.185330] pps_core: LinuxPPS API ver. 1 registered
[    0.186465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.188018] PTP clock support registered
[    0.189040] PCI: Using ACPI for IRQ routing
[    0.190062] PCI: pci_cache_line_size set to 64 bytes
[    0.192142] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.193437] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[    0.196166] Bluetooth: Core ver 2.19
[    0.197141] NET: Registered protocol family 31
[    0.198196] Bluetooth: HCI device and connection manager initialized
[    0.199568] Bluetooth: HCI socket layer initialized
[    0.200009] Bluetooth: L2CAP socket layer initialized
[    0.201194] Bluetooth: SCO socket layer initialized
[    0.202344] NET: Registered protocol family 8
[    0.204004] NET: Registered protocol family 20
[    0.205469] Switched to clocksource kvm-clock
[    0.206874] FS-Cache: Loaded
[    0.207760] pnp: PnP ACPI init
[    0.208000] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.208785] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.210254] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.211712] pnp 00:03: [dma 2]
[    0.212619] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.214117] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.215622] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.217630] pnp: PnP ACPI: found 6 devices
[    0.218668] PnPBIOS: Disabled
[    0.559340] mdacon: MDA with 8K of memory detected.
[    0.559459] Console: switching consoles 13-16 to MDA-2
[    0.596760] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.598222] pci_bus 0000:00: resource 5 [io  0x0d00-0xadff]
[    0.599685] pci_bus 0000:00: resource 6 [io  0xae0f-0xaeff]
[    0.601137] pci_bus 0000:00: resource 7 [io  0xaf20-0xafdf]
[    0.602595] pci_bus 0000:00: resource 8 [io  0xafe4-0xffff]
[    0.604149] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[    0.605714] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff]
[    0.607413] NET: Registered protocol family 2
[    0.609222] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.611009] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
[    0.612949] TCP: Hash tables configured (established 4096 bind 4096)
[    0.614847] TCP: reno registered
[    0.615891] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    0.617454] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    0.619335] NET: Registered protocol family 1
[    0.620599] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.622142] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.623658] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.625255] pci 0000:00:02.0: Boot video device
[    0.626566] PCI: CLS 0 bytes, default 64
[    0.628050] Unpacking initramfs...
[    0.632409] Initramfs unpacking failed: junk in compressed archive
[    0.635014] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[    0.636946] IP: [<d1c52d71>] validate_chain.isra.37+0xc5/0x10e5
[    0.638357] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    0.638357] Oops: 0000 [#1] PREEMPT 
[    0.638357] Modules linked in:
[    0.638357] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc6-next-20140724 #89
[    0.638357] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[    0.638357] task: d044a010 ti: d044c000 task.ti: d044c000
[    0.638357] EIP: 0060:[<d1c52d71>] EFLAGS: 00010086 CPU: 0
[    0.638357] EIP is at validate_chain.isra.37+0xc5/0x10e5
[    0.638357] EAX: 00000000 EBX: 0000000e ECX: 00000000 EDX: fffffffc
[    0.638357] ESI: d044a4f4 EDI: d2883348 EBP: d044dd6c ESP: d044dd08
[    0.638357]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.638357] CR0: 8005003b CR2: 0000000c CR3: 12467000 CR4: 000006b0
[    0.638357] Stack:
[    0.638357]  0000000e d044dd14 d1c243ae d044dd1c d1c07d05 d044dd48 d28a27e0 d044a4f4
[    0.638357]  00000001 d044a010 00000000 00000000 00000000 00000000 d044a010 0000000e
[    0.638357]  d044dd64 d1c489f8 25d94f2b 00000000 00000000 d044a010 0000000e d044a010
[    0.638357] Call Trace:
[    0.638357]  [<d1c243ae>] ? kvm_clock_read+0x13/0x24
[    0.638357]  [<d1c07d05>] ? sched_clock+0x8/0xb
[    0.638357]  [<d1c489f8>] ? sched_clock_cpu+0xb1/0xd0
[    0.638357]  [<d1c54cf2>] __lock_acquire+0x350/0xaa5
[    0.638357]  [<d1c243ae>] ? kvm_clock_read+0x13/0x24
[    0.638357]  [<d1c07d05>] ? sched_clock+0x8/0xb
[    0.638357]  [<d1c24e2e>] ? pvclock_clocksource_read+0xbb/0x149
[    0.638357]  [<d1c55b97>] lock_acquire+0x77/0x92
[    0.638357]  [<d1c9324f>] ? free_pcppages_bulk+0x1f/0x30b
[    0.638357]  [<d208e83c>] _raw_spin_lock+0x3c/0x69
[    0.638357]  [<d1c9324f>] ? free_pcppages_bulk+0x1f/0x30b
[    0.638357]  [<d1c9324f>] free_pcppages_bulk+0x1f/0x30b
[    0.638357]  [<d1c92018>] ? free_pages_prepare+0xc1/0xea
[    0.638357]  [<d1c936e8>] free_hot_cold_page+0x123/0x164
[    0.638357]  [<d1c9373c>] __free_pages.part.74+0x13/0x18
[    0.638357]  [<d1c9374f>] __free_pages+0xe/0x10
[    0.638357]  [<d1c937b0>] free_reserved_area+0x5f/0xdc
[    0.638357]  [<d1c27ca1>] ? set_memory_rw+0x48/0x4a
[    0.638357]  [<d1c250f0>] free_init_pages+0x5b/0x7e
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d2406bd3>] free_initrd_mem+0x26/0x2a
[    0.638357]  [<d23f9e67>] populate_rootfs+0xd7/0xf9
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d1c00426>] do_one_initcall+0x7f/0x1b9
[    0.638357]  [<d23f9d90>] ? maybe_link.part.2+0xe4/0xe4
[    0.638357]  [<d1c54658>] ? trace_hardirqs_on_caller+0xeb/0x1af
[    0.638357]  [<d1c41d8a>] ? parameq+0x13/0x5e
[    0.638357]  [<d23f859b>] ? repair_env_string+0x12/0x51
[    0.638357]  [<d1c41fbe>] ? parse_args+0x1e9/0x319
[    0.638357]  [<d1c3c5ca>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.638357]  [<d23f8d09>] kernel_init_freeable+0xde/0x178
[    0.638357]  [<d23f8589>] ? initcall_blacklist+0x81/0x81
[    0.638357]  [<d20830d0>] kernel_init+0xb/0xc7
[    0.638357]  [<d1c46f06>] ? schedule_tail+0xc/0x3a
[    0.638357]  [<d208f640>] ret_from_kernel_thread+0x20/0x30
[    0.638357]  [<d20830c5>] ? rest_init+0xb5/0xb5
[    0.638357] Code: 89 4d c4 39 c7 74 41 8b 4d c8 33 48 0c 8b 50 08 31 da 09 d1 0f 84 59 03 00 00 8b 55 c4 89 75 b8 8b 45 c8 89 45 c4 eb 13 8b 4d c4 <33> 48 0c 8b 70 08 31 de 09 f1 0f 84 38 03 00 00 8b 42 04 8d 50
[    0.638357] EIP: [<d1c52d71>] validate_chain.isra.37+0xc5/0x10e5 SS:ESP 0068:d044dd08
[    0.638357] CR2: 000000000000000c
[    0.638357] ---[ end trace af9f92549db6e569 ]---
[    0.638357] note: swapper[1] exited with preempt_count 1
[    0.734957] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    0.734957] 
[    0.737734] Rebooting in 10 seconds..

Elapsed time: 5
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-ib1-07251153/1a58d9909611972fd1c081bb04a9f7dc2571e612/vmlinuz-3.16.0-rc6-next-20140724 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-ib1-07251153/next:master:1a58d9909611972fd1c081bb04a9f7dc2571e612:bisect-linux-9/.vmlinuz-1a58d9909611972fd1c081bb04a9f7dc2571e612-20140725121947-2-ivb42 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-ib1-07251153/1a58d9909611972fd1c081bb04a9f7dc2571e612/vmlinuz-3.16.0-rc6-next-20140724 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb42-98 -serial file:/dev/shm/kboot/serial-quantal-ivb42-98 -daemonize -display none -monitor null

#5 lore raw
Quoted 27 lines · Fengguang Wu

Hi Stephane,

Quoted 15 lines · Stephane Eranian
Quoted 6 lines · Fengguang Wu
Quoted 5 lines · Stephane Eranian
Quoted 4 lines · Fengguang Wu

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

Quoted 8 lines
Quoted 1 line

Is this booting a guest kernel or native?

It's a guest kernel.

Quoted 1 line

What is the host CPU?

The host CPU is E5-2680, Sandy Bridge-EP.

Quoted 8 lines

I thought this problem had already be mentioned a while back.

See https://lkml.org/lkml/2014/3/6/685
And https://lkml.org/lkml/2014/4/23/512

So what you are telling here is that those two fixes never made it or that you are
running an older kernel.

Quoted 7 lines

I just checked linux-next and find that the bug in rapl_pmu_init() has been fixed. linux-next happen to have the same "BUG: unable to handle kernel NULL pointer dereference" message but at another function validate_chain().. Attached is the dmesg in linux-next.

Sorry for the noise!

Is it fixed with the two patches I referred you to?

Quoted 212 lines

Thanks,
Fengguang

Quoted 209 lines
Quoted 209 lines
Quoted 209 lines
Quoted 209 lines

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 4788e5b4b2338f85fa42a712a182d8afd65d7c58

Author:     Stephane Eranian <[email protected]>
AuthorDate: Tue Nov 12 17:58:50 2013 +0100
Commit:     Ingo Molnar <[email protected]>
CommitDate: Wed Nov 27 11:16:40 2013 +0100

perf/x86: Add Intel RAPL PMU support

This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed.

The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter.

The following events are available and exposed in sysfs:

- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)

For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are:

/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale

The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown.

All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach.

To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).

RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type.

Sampling is not supported by the RAPL PMU. There is no privilege level filtering either.

+-----------------------------------------------------------+------------+------------+---------------+
|                                                           | 410136f5dd | 4788e5b4b2 | next-20140724 |
+-----------------------------------------------------------+------------+------------+---------------+
| boot_successes                                            | 1000       | 751        | 78            |
| boot_failures                                             | 0          | 149        | 3             |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference      | 0          | 132        | 2             |
| Oops                                                      | 0          | 132        | 2             |
| EIP_is_at_rapl_pmu_init                                   | 0          | 132        |               |
| Kernel_panic-not_syncing:Attempted_to_kill_init_exitcode= | 0          | 132        | 2             |
| backtrace:rapl_pmu_init                                   | 0          | 132        |               |
| backtrace:kernel_init_freeable                            | 0          | 132        | 2             |
| BUG:kernel_boot_hang                                      | 0          | 17         | 1             |
| EIP_is_at_validate_chain                                  | 0          | 0          | 2             |
| backtrace:free_reserved_area                              | 0          | 0          | 2             |
| backtrace:free_init_pages                                 | 0          | 0          | 2             |
| backtrace:populate_rootfs                                 | 0          | 0          | 2             |
+-----------------------------------------------------------+------------+------------+---------------+
[    0.613305] PCI: CLS 0 bytes, default 64
[    0.614699] Unpacking initramfs...
[    0.732188] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000)
[    0.733895] BUG: unable to handle kernel NULL pointer dereference at 00000028
[    0.735603] IP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139
[    0.736012] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[    0.736012] Oops: 0000 [#1] PREEMPT
[    0.736012] Modules linked in:
[    0.736012] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-05711-g4788e5b #11
[    0.736012] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.736012] task: d244c020 ti: d244e000 task.ti: d244e000
[    0.736012] EIP: 0060:[<c09b20cb>] EFLAGS: 00010202 CPU: 0
[    0.736012] EIP is at rapl_pmu_init+0x11e/0x139
[    0.736012] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
[    0.736012] ESI: c09b1fad EDI: 000000cc EBP: d244ff00 ESP: d244fef0
[    0.736012]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[    0.736012] CR0: 80050033 CR2: 00000028 CR3: 00a16000 CR4: 000406b0
[    0.736012] Stack:
[    0.736012]  c04ddabe 00000000 00000002 00000000 d244ff74 c0200477 c0251b16 d244ff2c
[    0.736012]  c025467d d3ff63cb d244ff34 c02410cb d3ff63cb d244ff00 c09aa512 c080d71c
[    0.736012]  000000cc d244ff74 c02412d5 c0829fe0 00000286 c023b6d8 00000246 00060006
[    0.736012] Call Trace:
[    0.736012]  [<c04ddabe>] ? register_syscore_ops+0x32/0x35
[    0.736012]  [<c0200477>] do_one_initcall+0xdf/0x138
[    0.736012]  [<c0251b16>] ? lock_release_holdtime.part.20+0x93/0xf8
[    0.736012]  [<c025467d>] ? trace_hardirqs_on_caller+0xeb/0x1ad
[    0.736012]  [<c02410cb>] ? parameq+0x13/0x5e
[    0.736012]  [<c09aa512>] ? repair_env_string+0x12/0x51
[    0.736012]  [<c02412d5>] ? parse_args+0x1bf/0x2f8
[    0.736012]  [<c023b6d8>] ? __usermodehelper_set_disable_depth+0x3e/0x44
[    0.736012]  [<c09aab46>] kernel_init_freeable+0xde/0x178
[    0.736012]  [<c09aa500>] ? do_early_param+0x78/0x78
[    0.736012]  [<c064bd10>] kernel_init+0xb/0xed
[    0.736012]  [<c0249199>] ? schedule_tail+0xc/0x3a
[    0.736012]  [<c0659637>] ret_from_kernel_thread+0x1b/0x28
[    0.736012]  [<c064bd05>] ? rest_init+0xb5/0xb5
[    0.736012] Code: 99 87 ff 89 5c 24 04 c7 04 24 90 bf 76 c0 e8 dd e9 c9 ff 83 c8 ff eb 28 a1 44 bc a1 c0 f3 0f b8 c0 90 89 44 24 08 a1 80 73 82 c0 <8b> 40 28 89 44 24 04 c7 04 24 d4 bf 76 c0 e8 b2 e9 c9 ff 31 c0
[    0.736012] EIP: [<c09b20cb>] rapl_pmu_init+0x11e/0x139 SS:ESP 0068:d244fef0
[    0.736012] CR2: 0000000000000028
[    0.736012] ---[ end trace 0a81712c9fb36a0a ]---
[    0.736012] swapper (1) used greatest stack depth: 5800 bytes left

git bisect start v3.14 v3.13 --

git bisect  bad 09df7c4c8097ca4a11393b1edd4997d786daad52  # 16:18      0-      3  x86: Remove CONFIG_X86_OOSTORE
git bisect  bad 15c81026204da897a05424c79263aea861a782cc  # 16:24      2-      5  Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad a0fa1dd3cdbccec9597fe53b6177a9aa6e20f2f8  # 16:33      0-     15  Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good edde1fb8c41d0db7c8ce17fb32886da2e389b0cc  # 17:48    900+      0  Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
git bisect good a693c46e14c9fdadbcd68ddfa94a4f72495531a9  # 17:55    900+      0  Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 2cc3f16cad1561c6fc551aefff559e53726efc8b  # 18:12    900+      0  Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 9326657abe1a83ed4b4f396b923ca1217fd50cba  # 18:21      9-      2  Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect  bad 7bb73553e2490ac6667387ee723e0faa61e9d999  # 18:38      0-      1  tools lib traceevent: Get rid of die() in reparent_op_arg()
git bisect  bad 3d7c0144491bd8c21d53b43032274a85efdfe434  # 18:41     11-      4  perf tools: Add build and install plugins targets
git bisect  bad ba1ddf42f3c3af111d3adee277534f73c1ef6a9b  # 18:43      0-     15  perf script: Print mmap[2] events also
git bisect  bad a8b4c7014cadfdacd4e1f4c963128593be6f20de  # 18:49      0-      2  perf completion: Rename file to reflect zsh support
git bisect  bad 4788e5b4b2338f85fa42a712a182d8afd65d7c58  # 18:53      0-      1  perf/x86: Add Intel RAPL PMU support
git bisect good c912dae60ae6f659455f239298110adc67a5f3e9  # 19:33    900+     14  uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
git bisect good 09897d78dbc3a544426f2272b5601c62922ccab9  # 19:44    900+      0  Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:52    900+      0  tools/perf/stat: Add event unit and scale support
# first bad commit: [4788e5b4b2338f85fa42a712a182d8afd65d7c58] perf/x86: Add Intel RAPL PMU support
git bisect good 410136f5dd96b6013fe6d1011b523b1c247e1ccb  # 19:56   1000+      0  tools/perf/stat: Add event unit and scale support
git bisect  bad 1a58d9909611972fd1c081bb04a9f7dc2571e612  # 19:58      0-      3  Add linux-next specific files for 20140724
git bisect  bad 82e13c71bc655b6dc7110da4e164079dadb44892  # 20:07    448-     10  Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
git bisect  bad 5a7439efd1c5c416f768fc550048ca130cf4bf99  # 20:14      2-      6  Add linux-next specific files for 20140725

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-i386.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(

        qemu-system-x86_64
        -enable-kvm
        -cpu Haswell,+smep,+smap
        -kernel $kernel
        -initrd $initrd
        -m 320
        -smp 1
        -net nic,vlan=1,model=e1000
        -net user,vlan=1
        -boot order=nc
        -no-reboot
        -watchdog i6300esb
        -rtc base=localtime
        -serial stdio
        -display none
        -monitor null

)

append=(

        hung_task_panic=1
        earlyprintk=ttyS0,115200
        debug
        apic=debug
        sysrq_always_enabled
        rcupdate.rcu_cpu_stall_timeout=100
        panic=10
        softlockup_panic=1
        nmi_watchdog=panic
        prompt_ramdisk=0
        console=ttyS0,115200
        console=tty0
        vga=normal
        root=/dev/ram0
        rw
        drbd.minor_count=8

)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Thanks,
Fengguang

_______________________________________________
LKP mailing list
LKP(a)linux.intel.com

#6 lore raw
Quoted 28 lines · Stephane Eranian
Quoted 27 lines · Fengguang Wu

Hi Stephane,

Quoted 23 lines · Stephane Eranian
Quoted 6 lines · Fengguang Wu
Quoted 5 lines · Stephane Eranian
Quoted 4 lines · Fengguang Wu

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

Quoted 8 lines
Quoted 1 line

Is this booting a guest kernel or native?

It's a guest kernel.

Quoted 1 line

What is the host CPU?

The host CPU is E5-2680, Sandy Bridge-EP.

I thought this problem had already be mentioned a while back.

See https://lkml.org/lkml/2014/3/6/685
And https://lkml.org/lkml/2014/4/23/512

So what you are telling here is that those two fixes never made it or that you are
running an older kernel.

Quoted 8 lines
Quoted 7 lines

I just checked linux-next and find that the bug in rapl_pmu_init() has been fixed. linux-next happen to have the same "BUG: unable to handle kernel NULL pointer dereference" message but at another function validate_chain().. Attached is the dmesg in linux-next.

Sorry for the noise!

Is it fixed with the two patches I referred you to?

Yes.

Thanks,
Fengguang