PCI changes for v3.17 (part 3)
Bjorn Helgaas
maintainerHi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my 'next' branch just before leaving on vacation, but I forgot to include them in my merge window pull request when I returned. They're low-risk, so I'm sending them to you now (late), but the world won't end if they wait until v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v3.17-changes-3
for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
Merge branches 'pci/host-designware', 'pci/host-mvebu' and 'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
----------------------------------------------------------------
PCI changes for v3.17 (part 3):
Marvell MVEBU
- Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
NVIDIA Tegra
- Add debugfs support (Thierry Reding)
Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
- Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: Remove ARCH_KIRKWOOD dependency
Bjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and 'pci/host-tegra' into next
Kishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driver
Murali Karicheri (2):
PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware
PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
Thierry Reding (1):
PCI: tegra: Add debugfs support
.../devicetree/bindings/pci/designware-pcie.txt | 4 + Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 11 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 458 +++++++++++++++++++++ drivers/pci/host/pci-tegra.c | 118 ++++++ drivers/pci/host/pcie-designware.c | 134 ++++-- drivers/pci/host/pcie-designware.h | 11 + 9 files changed, 771 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt create mode 100644 drivers/pci/host/pci-dra7xx.c
Hi Bjorn,
I see you have pulled in my designware related patches for Keystone PCI in this request. When do you think you can pull in Keystone PCI driver (v8) on the list?
Thanks and regards,
Murali
-------- Original Message --------
Subject: [GIT PULL] PCI changes for v3.17 (part 3)
Date: Mon, 18 Aug 2014 22:40:50 -0600
From: Bjorn Helgaas <[email protected]>
To: Linus Torvalds <[email protected]>
CC: <[email protected]>, <[email protected]>, "Murali Karicheri" <[email protected]>, Kishon Vijay Abraham I <[email protected]>, Thierry Reding <[email protected]>, Andrew Lunn <[email protected]>
Hi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my 'next' branch just before leaving on vacation, but I forgot to include them in my merge window pull request when I returned. They're low-risk, so I'm sending them to you now (late), but the world won't end if they wait until v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
tags/pci-v3.17-changes-3
for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
----------------------------------------------------------------
PCI changes for v3.17 (part 3):
Marvell MVEBU
- Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
NVIDIA Tegra
- Add debugfs support (Thierry Reding)
Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-related pcie_host_ops for v3.65 hardware
(Murali Karicheri)
- Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: Remove ARCH_KIRKWOOD dependency
Bjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next
Kishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driver
Murali Karicheri (2):
PCI: designware: Add config access-related pcie_host_ops for
v3.65 hardware
PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
Thierry Reding (1):
PCI: tegra: Add debugfs support
.../devicetree/bindings/pci/designware-pcie.txt | 4 + Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 11 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 458 +++++++++++++++++++++ drivers/pci/host/pci-tegra.c | 118 ++++++ drivers/pci/host/pcie-designware.c | 134 ++++-- drivers/pci/host/pcie-designware.h | 11 + 9 files changed, 771 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt create mode 100644 drivers/pci/host/pci-dra7xx.c
Bjorn Helgaas
maintainerQuoted 5 lines · Murali Karicheri
Hi Bjorn,
I see you have pulled in my designware related patches for Keystone PCI in this request. When do you think you can pull in Keystone PCI driver (v8) on the list?
The things in this pull request have been in linux-next for a month. I'm ready to apply the Keystone driver, but since we're after the merge window and the Keystone driver hasn't been in -next at all, I plan to put it in v3.18.
I know I hoped to get this in v3.17, but even if I merged it today I would let it soak in -next for a week or so, and then we'd be past v3.17-rc2, and that feels past the reasonable point for a pull request.
Bjorn
Quoted 92 lines
-------- Original Message --------
Subject: [GIT PULL] PCI changes for v3.17 (part 3)
Date: Mon, 18 Aug 2014 22:40:50 -0600
From: Bjorn Helgaas <[email protected]>
To: Linus Torvalds <[email protected]>
CC: <[email protected]>, <[email protected]>, "Murali Karicheri" <[email protected]>, Kishon Vijay Abraham I <[email protected]>, Thierry Reding <[email protected]>, Andrew Lunn <[email protected]>Hi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my 'next' branch just before leaving on vacation, but I forgot to include them in my merge window pull request when I returned. They're low-risk, so I'm sending them to you now (late), but the world won't end if they wait until v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit
792688fde431b4fdb2cf10a6f7589a8176b6b14a:Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
tags/pci-v3.17-changes-3for you to fetch changes up to
981c191778a4f92bc82456205a444d522843a630:Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)----------------------------------------------------------------
PCI changes for v3.17 (part 3):Marvell MVEBU
- RemoveARCH_KIRKWOODdependency (Andrew Lunn)NVIDIA Tegra
- Add debugfs support (Thierry Reding)Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-relatedpcie_host_opsfor v3.65 hardware (Murali
Karicheri)
- Add MSI-relatedpcie_host_opsfor v3.65 hardware (Murali Karicheri)TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: RemoveARCH_KIRKWOODdependencyBjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into nextKishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driverMurali Karicheri (2):
PCI: designware: Add config access-relatedpcie_host_opsfor v3.65
hardware
PCI: designware: Add MSI-relatedpcie_host_opsfor v3.65 hardwareThierry Reding (1):
PCI: tegra: Add debugfs support.../devicetree/bindings/pci/designware-pcie.txt | 4 + Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 11 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 458 +++++++++++++++++++++ drivers/pci/host/pci-tegra.c | 118 ++++++ drivers/pci/host/pcie-designware.c | 134 ++++-- drivers/pci/host/pcie-designware.h | 11 + 9 files changed, 771 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt create mode 100644 drivers/pci/host/pci-dra7xx.c
Bjorn,
Quoted 12 lines · Bjorn Helgaas
Quoted 5 lines · Murali Karicheri
Hi Bjorn,
I see you have pulled in my designware related patches for Keystone PCI in this request. When do you think you can pull in Keystone PCI driver (v8) on the list?
The things in this pull request have been in linux-next for a month. I'm ready to apply the Keystone driver, but since we're after the merge window and the Keystone driver hasn't been in -next at all, I plan to put it in v3.18.
Quoted 5 lines
I know I hoped to get this in v3.17, but even if I merged it today I would let it soak in -next for a week or so, and then we'd be past v3.17-rc2, and that feels past the reasonable point for a pull request.
Looks good to me. Thanks and regards,
Murali
Quoted 94 lines
Bjorn
Quoted 92 lines
-------- Original Message --------
Subject: [GIT PULL] PCI changes for v3.17 (part 3)
Date: Mon, 18 Aug 2014 22:40:50 -0600
From: Bjorn Helgaas<[email protected]>
To: Linus Torvalds<[email protected]> CC:<[email protected]>,<[email protected]>, "Murali Karicheri"<[email protected]>, Kishon Vijay Abraham I<[email protected]>, Thierry Reding<[email protected]>, Andrew Lunn<[email protected]>Hi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my 'next' branch just before leaving on vacation, but I forgot to include them in my merge window pull request when I returned. They're low-risk, so I'm sending them to you now (late), but the world won't end if they wait until v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit
792688fde431b4fdb2cf10a6f7589a8176b6b14a:Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
tags/pci-v3.17-changes-3for you to fetch changes up to
981c191778a4f92bc82456205a444d522843a630:Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)----------------------------------------------------------------
PCI changes for v3.17 (part 3):Marvell MVEBU
- RemoveARCH_KIRKWOODdependency (Andrew Lunn)NVIDIA Tegra
- Add debugfs support (Thierry Reding)Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-relatedpcie_host_opsfor v3.65 hardware (Murali
Karicheri)
- Add MSI-relatedpcie_host_opsfor v3.65 hardware (Murali Karicheri)TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: RemoveARCH_KIRKWOODdependencyBjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into nextKishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driverMurali Karicheri (2):
PCI: designware: Add config access-relatedpcie_host_opsfor v3.65
hardware
PCI: designware: Add MSI-relatedpcie_host_opsfor v3.65 hardwareThierry Reding (1):
PCI: tegra: Add debugfs support.../devicetree/bindings/pci/designware-pcie.txt | 4 + Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 11 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 458 +++++++++++++++++++++ drivers/pci/host/pci-tegra.c | 118 ++++++ drivers/pci/host/pcie-designware.c | 134 ++++-- drivers/pci/host/pcie-designware.h | 11 + 9 files changed, 771 insertions(+), 33 deletions(-)create mode 100644
Documentation/devicetree/bindings/pci/ti-pci.txtcreate mode 100644drivers/pci/host/pci-dra7xx.c
Quoted 12 lines · Bjorn Helgaas
Quoted 5 lines · Murali Karicheri
Hi Bjorn,
I see you have pulled in my designware related patches for Keystone PCI in this request. When do you think you can pull in Keystone PCI driver (v8) on the list?
The things in this pull request have been in linux-next for a month. I'm ready to apply the Keystone driver, but since we're after the merge window and the Keystone driver hasn't been in -next at all, I plan to put it in v3.18.
BJorn,
Do you have a v3.18 next branch that you can add this patch to? I need to send out additional patches on top of this to support PCIe and SATA on another K2 platform, K2E and will be good if I can base it on a merged branch. Also I am afraid, we will have nasty merge issues to deal with if others start making changes in parallel and conflict with this patch series.
Thanks and regards,
Murali
Quoted 99 lines
I know I hoped to get this in v3.17, but even if I merged it today I would let it soak in -next for a week or so, and then we'd be past v3.17-rc2, and that feels past the reasonable point for a pull request.
Bjorn
Quoted 92 lines
-------- Original Message --------
Subject: [GIT PULL] PCI changes for v3.17 (part 3)
Date: Mon, 18 Aug 2014 22:40:50 -0600
From: Bjorn Helgaas<[email protected]>
To: Linus Torvalds<[email protected]> CC:<[email protected]>,<[email protected]>, "Murali Karicheri"<[email protected]>, Kishon Vijay Abraham I<[email protected]>, Thierry Reding<[email protected]>, Andrew Lunn<[email protected]>Hi Linus,
I screwed up. I intended these changes for v3.17, and I put them in my 'next' branch just before leaving on vacation, but I forgot to include them in my merge window pull request when I returned. They're low-risk, so I'm sending them to you now (late), but the world won't end if they wait until v3.18.
The main reason to include them would be to support the TI DRA7xx.
Bjorn
The following changes since commit
792688fde431b4fdb2cf10a6f7589a8176b6b14a:Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
tags/pci-v3.17-changes-3for you to fetch changes up to
981c191778a4f92bc82456205a444d522843a630:Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)----------------------------------------------------------------
PCI changes for v3.17 (part 3):Marvell MVEBU
- RemoveARCH_KIRKWOODdependency (Andrew Lunn)NVIDIA Tegra
- Add debugfs support (Thierry Reding)Synopsys DesignWare
- Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
Abraham I)
- Program ATU with untranslated address (Kishon Vijay Abraham I)
- Add config access-relatedpcie_host_opsfor v3.65 hardware (Murali
Karicheri)
- Add MSI-relatedpcie_host_opsfor v3.65 hardware (Murali Karicheri)TI DRA7xx
- Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)----------------------------------------------------------------
Andrew Lunn (1):
PCI: mvebu: RemoveARCH_KIRKWOODdependencyBjorn Helgaas (1):
Merge branches 'pci/host-designware', 'pci/host-mvebu' and
'pci/host-tegra' into nextKishon Vijay Abraham I (3):
PCI: designware: Look for configuration space in 'reg', not 'ranges'
PCI: designware: Program ATU with untranslated address
PCI: dra7xx: Add TI DRA7xx PCIe driverMurali Karicheri (2):
PCI: designware: Add config access-relatedpcie_host_opsfor v3.65
hardware
PCI: designware: Add MSI-relatedpcie_host_opsfor v3.65 hardwareThierry Reding (1):
PCI: tegra: Add debugfs support.../devicetree/bindings/pci/designware-pcie.txt | 4 + Documentation/devicetree/bindings/pci/ti-pci.txt | 59 +++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 11 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 458 +++++++++++++++++++++ drivers/pci/host/pci-tegra.c | 118 ++++++ drivers/pci/host/pcie-designware.c | 134 ++++-- drivers/pci/host/pcie-designware.h | 11 + 9 files changed, 771 insertions(+), 33 deletions(-)create mode 100644
Documentation/devicetree/bindings/pci/ti-pci.txtcreate mode 100644drivers/pci/host/pci-dra7xx.c
Bjorn Helgaas
maintainerQuoted 19 lines · Murali Karicheri
Quoted 13 lines · Bjorn Helgaas
Quoted 8 lines · Murali Karicheri
Hi Bjorn,
I see you have pulled in my designware related patches for Keystone PCI in
this request. When do you think you can pull in Keystone PCI driver (v8) on
the list?Quoted 5 lines
The things in this pull request have been in linux-next for a month. I'm ready to apply the Keystone driver, but since we're after the merge window and the Keystone driver hasn't been in -next at all, I plan to put it in v3.18.
Quoted 7 lines
BJorn,
Do you have a v3.18 next branch that you can add this patch to? I need to send out additional patches on top of this to support PCIe and SATA on another K2 platform, K2E and will be good if I can base it on a merged branch. Also I am afraid, we will have nasty merge issues to deal with if others start making changes in parallel and conflict with this patch series.
Yes. I put it on a pci/host-keystone branch for v3.18.
Bjorn