Skip to contentSkip to conversation

powertop 2.6 still reports incorrect device battery usage

Powertop Marc MERLIN 1 participant 1 message Aug 21, 2014

lore
Share & tools
lore

Marc MERLIN

author
#0 lore raw

On kernel 3.15.5, thinkpad T540p IDPS display, intel graphics

I'm still getting bogus numbers for devices.

Snapshot #1:
- My wifi card is certainly not using 12.7W
- Display backlight + wifi = 17.9W, which means the entire laptop would be running on 2W? That's of course wrong
- The 1117 wakeups are not accounted for and apps blamed correctly for that use

Quoted 11 lines

The battery reports a discharge rate of 19.8 W The estimated remaining time is 2 hours, 37 minutes

Summary: 1117.0 wakeups/second, 182.7 GPU ops/seconds, 0.0 VFS ops/sec and 9.0% CPU use

Power est. Usage Events/s Category Description

  12.7 W     36.3 pkts/s                Device         Network interface: wlan0 (iwlwifi)
  5.17 W      8.0%                      Device         Display backlight
  322 mW     25.0 ms/s     331.3        Process        /usr/bin/enlightenment
  179 mW     19.7 ms/s      60.7        Process        /usr/bin/X :0 vt7 -br -nolisten tcp -auth
  178 mW      4.8 ms/s     246.2        Process        xmms

I blew away my calibration, upgraded from powertop 2.4 to 2.6.1, and now I see:
The battery reports a discharge rate of 17.6 W
The estimated remaining time is 5 hours, 10 minutes

Summary: 893.0 wakeups/second, 26.4 GPU ops/seconds, 0.0 VFS ops/sec and 11.3% CPU use

Power est. Usage Events/s Category Description

  18.7 W    216.8 pkts/s                Device         Network interface: wlan0 (iwlwifi)
  5.16 W     33.0%                      Device         Display backlight
 61.0 mW     35.8 ms/s      86.5        Process        dpkg
 39.4 mW      1.6 ms/s      24.9        Process        xfce4-terminal -T window1.10 --role=window1.10 --tab
 35.6 mW      8.2 ms/s     133.2        kWork          normal_work_helper

How can powertop tell me that my wireless card is using more power than the entire laptop?

Clearly the calibration didn't work right, but shouldn't the code have checks for things that are clearly wrong and tell the user what to do to fix them/recalibrate?

Or better, shouldn't it retune the device usage on its own when it finds something clearly wrong like power use of the laptop being negative after removing devices, or inconsistent with the basic power usage calculated during calibration?

Thanks,
Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901