double fault: ffff [#1]
Hi Andi,
Here is another bisect result with much earlier oops.
commit b8a868e9ea876a1b40020397305533c095921d7a
Author: Andi Kleen <[email protected]> AuthorDate: Wed Apr 23 13:26:20 2014 -0700 Commit: Andi Kleen <[email protected]> CommitDate: Fri Oct 3 15:19:56 2014 -0700
x86: Add support for rd/wr fs/gs base
...
v2: Change to save/restore GS instead of using swapgs based on the value. Large scale changes.
Attached dmesg for the parent commit, too, to help confirm whether it is a noise error.
+-------------------------------------------------------+------------+------------+------------------+ | | 598d570a05 | b8a868e9ea | v3.17-rc7_100409 | +-------------------------------------------------------+------------+------------+------------------+ | boot_successes | 207 | 24 | 17 | | boot_failures | 3 | 46 | 4 | | BUG:kernel_boot_crashed | 3 | | | | double_fault:ffff | 0 | 39 | 4 | | RIP:trace_hardirqs_off_thunk | 0 | 22 | 1 | | BUG:unable_to_handle_kernel | 0 | 17 | 1 | | Oops | 0 | 15 | 1 | | RIP:show_stack_log_lvl | 0 | 14 | 1 | | Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 0 | 20 | 2 | | RIP:trace_hardirqs_off_caller | 0 | 6 | 1 | | BUG:kernel_boot_hang | 0 | 23 | 2 | | backtrace:rescuer_thread | 0 | 1 | | +-------------------------------------------------------+------------+------------+------------------+
[ 0.212404] regulator-dummy: no parameters [ 0.215602] NET: Registered protocol family 16 [ 0.215602] NET: Registered protocol family 16 [ 0.232049] double fault: ffff [#1] [ 0.232049] double fault: ffff [#1] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.233000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.233000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.233000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.233000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.233000] RIP: 0010:[<ffffffff818273f5>] [ 0.233000] RIP: 0010:[<ffffffff818273f5>] [<ffffffff818273f5>] trace_hardirqs_off_thunk+0x35/0x3c [<ffffffff818273f5>] trace_hardirqs_off_thunk+0x35/0x3c [ 0.233000] RSP: 0000:ffff880012500000 EFLAGS: 00010086 [ 0.233000] RSP: 0000:ffff880012500000 EFLAGS: 00010086 [ 0.233000] RAX: 0000000082767ff0 RBX: 0000000000000001 RCX: ffffffff82767ff0 [ 0.233000] RAX: 0000000082767ff0 RBX: 0000000000000001 RCX: ffffffff82767ff0 [ 0.233000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82769326 [ 0.233000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82769326 [ 0.233000] RBP: ffff880012500110 R08: 0000000000000000 R09: 0000000000000001 [ 0.233000] RBP: ffff880012500110 R08: 0000000000000000 R09: 0000000000000001 [ 0.233000] R10: ffff880012503e98 R11: ffffffff838c7fb0 R12: 0000000000013ec0 [ 0.233000] R10: ffff880012503e98 R11: ffffffff838c7fb0 R12: 0000000000013ec0 [ 0.233000] R13: 0000000000013ec0 R14: 0000000000000000 R15: 0000000000000000 [ 0.233000] R13: 0000000000013ec0 R14: 0000000000000000 R15: 0000000000000000
BUG: kernel boot hang
Elapsed time: 305
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3/.vmlinuz-b8a868e9ea876a1b40020397305533c095921d7a-20141004114524-27-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-lkp-nex04-129 -serial file:/dev/shm/kboot/serial-quantal-lkp-nex04-129 -daemonize -display none -monitor null
git bisect start cd94c0185489f0cddcbfa80e86258bb4609b6e1d fe82dcec644244676d55a1384c958d5f67979adb --
git bisect good a3f8f887e2a36003026b5d3effdd418d507cf7c8 # 11:19 70+ 0 Merge 'spi/for-linus' into devel-hourly-2014100409 git bisect good 2e6b2ee6893da99e9a156087aee97f90b0c8429c # 11:26 70+ 0 Merge 'trace/for-next' into devel-hourly-2014100409 git bisect good 7ea38a3061ab82dcfb705c3f36f55ddd8c351c83 # 11:31 70+ 1 Merge 'usb/usb-next' into devel-hourly-2014100409 git bisect bad 6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8 # 11:35 0- 24 Merge 'driver-core/driver-core-next' into devel-hourly-2014100409 git bisect bad a33db30bb2f4d53f325e1c465f594894f559843c # 11:39 0- 1 Merge 'ak/x86/fsgs-2' into devel-hourly-2014100409 git bisect bad b8a868e9ea876a1b40020397305533c095921d7a # 11:46 0- 23 x86: Add support for rd/wr fs/gs base git bisect good a0b0be64599f50dc2c9fa85734026701221f186a # 11:53 70+ 1 x86: Naturally align the debug IST stack git bisect good 598d570a05cd31500fb15a843a92f68ddb1b3618 # 11:59 70+ 0 x86: Add intrinsics/macros for new rd/wr fs/gs base instructions # first bad commit: [b8a868e9ea876a1b40020397305533c095921d7a] x86: Add support for rd/wr fs/gs base git bisect good 598d570a05cd31500fb15a843a92f68ddb1b3618 # 12:05 210+ 3 x86: Add intrinsics/macros for new rd/wr fs/gs base instructions git bisect bad cd94c0185489f0cddcbfa80e86258bb4609b6e1d # 12:05 0- 4 0day head guard for 'devel-hourly-2014100409' git bisect good 126d4576cb73c8a440adc37c129589cd66051bcc # 12:11 210+ 7 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux git bisect good 2e1d004b9645628c64a2db55ef6b81fadf5e6e91 # 12:19 210+ 2 Add linux-next specific files for 20141003
This script may reproduce the error.
----------------------------------------------------------------------------
#!/bin/bash
kernel=$1
kvm=(
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel $kernel -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -serial stdio -display none -monitor null
)
append=(
hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw drbd.minor_count=8
)
"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------
Thanks,
Fengguang
_______________________________________________
LKP mailing list
LKP(a)linux.intel.com
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.17.0-rc7-00004-gb8a868e (kbuild@lkp-hsx02) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP PREEMPT Sat Oct 4 11:44:33 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3/.vmlinuz-b8a868e9ea876a1b40020397305533c095921d7a-20141004114524-27-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x06540000, 0x06540fff] PGTABLE [ 0.000000] BRK [0x06541000, 0x06541fff] PGTABLE [ 0.000000] BRK [0x06542000, 0x06542fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 4k [ 0.000000] BRK [0x06543000, 0x06543fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 4k [ 0.000000] BRK [0x06544000, 0x06544fff] PGTABLE [ 0.000000] BRK [0x06545000, 0x06545fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13fdffff] [ 0.000000] [mem 0x12800000-0x13fdffff] page 4k [ 0.000000] RAMDISK: [mem 0x12925000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdffff] [ 0.000000] NODE_DATA [mem 0x128ff000-0x12924fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1287f001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011800000-ffff880011dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57c000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880012400000 s85120 r0 d21376 u1048576 [ 0.000000] pcpu-alloc: s85120 r0 d21376 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1240da40 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3/.vmlinuz-b8a868e9ea876a1b40020397305533c095921d7a-20141004114524-27-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 208788K/327160K available (23975K kernel code, 17422K rwdata, 16352K rodata, 2748K init, 26140K bss, 118372K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:56 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.17.0-rc7-00004-gb8a868e (kbuild@lkp-hsx02) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP PREEMPT Sat Oct 4 11:44:33 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3/.vmlinuz-b8a868e9ea876a1b40020397305533c095921d7a-20141004114524-27-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x06540000, 0x06540fff] PGTABLE [ 0.000000] BRK [0x06541000, 0x06541fff] PGTABLE [ 0.000000] BRK [0x06542000, 0x06542fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 4k [ 0.000000] BRK [0x06543000, 0x06543fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 4k [ 0.000000] BRK [0x06544000, 0x06544fff] PGTABLE [ 0.000000] BRK [0x06545000, 0x06545fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13fdffff] [ 0.000000] [mem 0x12800000-0x13fdffff] page 4k [ 0.000000] RAMDISK: [mem 0x12925000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdffff] [ 0.000000] NODE_DATA [mem 0x128ff000-0x12924fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1287f001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011800000-ffff880011dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57c000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880012400000 s85120 r0 d21376 u1048576 [ 0.000000] pcpu-alloc: s85120 r0 d21376 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1240da40 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3/.vmlinuz-b8a868e9ea876a1b40020397305533c095921d7a-20141004114524-27-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 208788K/327160K available (23975K kernel code, 17422K rwdata, 16352K rodata, 2748K init, 26140K bss, 118372K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:56 0 [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2260.998 MHz processor [ 0.000000] tsc: Detected 2260.998 MHz processor [ 0.005000] Calibrating delay loop (skipped) preset value.. [ 0.005000] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=2260998) 4521.99 BogoMIPS (lpj=2260998) [ 0.006024] pid_max: default: 4096 minimum: 301 [ 0.006024] pid_max: default: 4096 minimum: 301 [ 0.007126] ACPI: Core revision 20140724 [ 0.007126] ACPI: Core revision 20140724 [ 0.027157] ACPI: [ 0.027157] ACPI: All ACPI Tables successfully acquiredAll ACPI Tables successfully acquired
[ 0.031134] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.031134] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.032623] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.032623] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.033216] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.033216] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.034049] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.034049] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.039287] Initializing cgroup subsys freezer [ 0.039287] Initializing cgroup subsys freezer [ 0.040099] Initializing cgroup subsys net_cls [ 0.040099] Initializing cgroup subsys net_cls [ 0.041102] Initializing cgroup subsys perf_event [ 0.041102] Initializing cgroup subsys perf_event [ 0.042041] Initializing cgroup subsys net_prio [ 0.042041] Initializing cgroup subsys net_prio [ 0.043045] Initializing cgroup subsys debug [ 0.043045] Initializing cgroup subsys debug [ 0.044231] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.044231] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.047028] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.047028] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.047028] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.047028] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.050218] debug: unmapping init [mem 0xffffffff84bb4000-0xffffffff84bb8fff] [ 0.050218] debug: unmapping init [mem 0xffffffff84bb4000-0xffffffff84bb8fff] [ 0.059340] Getting VERSION: 1050014 [ 0.059340] Getting VERSION: 1050014 [ 0.060029] Getting VERSION: 1050014 [ 0.060029] Getting VERSION: 1050014 [ 0.061031] Getting ID: 0 [ 0.061031] Getting ID: 0 [ 0.062038] Getting ID: ff000000 [ 0.062038] Getting ID: ff000000 [ 0.063038] Getting LVT0: 8700 [ 0.063038] Getting LVT0: 8700 [ 0.064027] Getting LVT1: 8400 [ 0.064027] Getting LVT1: 8400 [ 0.065133] enabled ExtINT on CPU#0 [ 0.065133] enabled ExtINT on CPU#0 [ 0.070370] ENABLING IO-APIC IRQs [ 0.070370] ENABLING IO-APIC IRQs [ 0.071133] init IO_APIC IRQs [ 0.071133] init IO_APIC IRQs [ 0.072021] apic 0 pin 0 not connected [ 0.072021] apic 0 pin 0 not connected [ 0.073211] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.073211] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.074133] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.074133] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.075078] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.075078] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.076093] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.076093] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.077069] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.077069] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.078074] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.078074] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.079068] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.079068] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.080068] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.080068] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.081068] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.081068] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.082068] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.082068] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.083081] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.083081] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.084074] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.084074] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.085065] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.085065] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.086066] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.086066] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.088078] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.088078] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.090067] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.090067] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.091052] apic 0 pin 16 not connected [ 0.091052] apic 0 pin 16 not connected [ 0.092016] apic 0 pin 17 not connected [ 0.092016] apic 0 pin 17 not connected [ 0.093016] apic 0 pin 18 not connected [ 0.093016] apic 0 pin 18 not connected [ 0.094016] apic 0 pin 19 not connected [ 0.094016] apic 0 pin 19 not connected [ 0.095016] apic 0 pin 20 not connected [ 0.095016] apic 0 pin 20 not connected [ 0.096015] apic 0 pin 21 not connected [ 0.096015] apic 0 pin 21 not connected [ 0.097017] apic 0 pin 22 not connected [ 0.097017] apic 0 pin 22 not connected [ 0.098016] apic 0 pin 23 not connected [ 0.098016] apic 0 pin 23 not connected [ 0.099258] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.099258] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.100018] smpboot: CPU0: [ 0.100018] smpboot: CPU0: Intel Intel Common KVM processorCommon KVM processor (fam: 0f, model: 06 (fam: 0f, model: 06, stepping: 01) , stepping: 01) [ 0.105021] Using local APIC timer interrupts. [ 0.105021] calibrating APIC timer ... [ 0.105021] Using local APIC timer interrupts. [ 0.105021] calibrating APIC timer ... [ 0.107000] ... lapic delta = 6878746 [ 0.107000] ... lapic delta = 6878746 [ 0.107000] ... PM-Timer delta = 393731 [ 0.107000] ... PM-Timer delta = 393731 [ 0.107000] APIC calibration not consistent with PM-Timer: 109ms instead of 100ms [ 0.107000] APIC calibration not consistent with PM-Timer: 109ms instead of 100ms [ 0.107000] APIC delta adjusted to PM-Timer: 6253697 (6878746) [ 0.107000] APIC delta adjusted to PM-Timer: 6253697 (6878746) [ 0.107000] TSC delta adjusted to PM-Timer: 226085015 (248681896) [ 0.107000] TSC delta adjusted to PM-Timer: 226085015 (248681896) [ 0.107000] ..... delta 6253697 [ 0.107000] ..... delta 6253697 [ 0.107000] ..... mult: 268594240 [ 0.107000] ..... mult: 268594240 [ 0.107000] ..... calibration result: 1000591 [ 0.107000] ..... calibration result: 1000591 [ 0.107000] ..... CPU clock speed is 2260.0850 MHz. [ 0.107000] ..... CPU clock speed is 2260.0850 MHz. [ 0.107000] ..... host bus clock speed is 1000.0591 MHz. [ 0.107000] ..... host bus clock speed is 1000.0591 MHz. [ 0.107280] Performance Events: [ 0.107280] Performance Events: unsupported Netburst CPU model 6 unsupported Netburst CPU model 6 no PMU driver, software events only. no PMU driver, software events only. [ 0.121121] [ 0.121121] ********************************************************** [ 0.121121] [ 0.121121] ********************************************************** [ 0.122014] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.122014] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.123015] ** ** [ 0.123015] ** ** [ 0.124015] ** trace_printk() being used. Allocating extra memory. ** [ 0.124015] ** trace_printk() being used. Allocating extra memory. ** [ 0.126012] ** ** [ 0.126012] ** ** [ 0.127014] ** This means that this is a DEBUG kernel and it is ** [ 0.127014] ** This means that this is a DEBUG kernel and it is ** [ 0.128017] ** unsafe for produciton use. ** [ 0.128017] ** unsafe for produciton use. ** [ 0.129013] ** ** [ 0.129013] ** ** [ 0.131029] ** If you see this message and you are not debugging ** [ 0.131029] ** If you see this message and you are not debugging ** [ 0.132013] ** the kernel, report this immediately to your vendor! ** [ 0.132013] ** the kernel, report this immediately to your vendor! ** [ 0.133013] ** ** [ 0.133013] ** ** [ 0.134015] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.134015] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.135014] ********************************************************** [ 0.135014] ********************************************************** [ 0.141434] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.141434] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.148847] x86: Booting SMP configuration: [ 0.148847] x86: Booting SMP configuration: [ 0.149015] .... node #0, CPUs: [ 0.149015] .... node #0, CPUs: #1 #1 [ 0.005000] kvm-clock: cpu 1, msr 0:1287f041, secondary cpu clock [ 0.005000] masked ExtINT on CPU#1 [ 0.005000] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.170151] x86: Booted up 1 node, 2 CPUs [ 0.170151] x86: Booted up 1 node, 2 CPUs [ 0.171017] smpboot: Total of 2 processors activated (9043.99 BogoMIPS) [ 0.171017] smpboot: Total of 2 processors activated (9043.99 BogoMIPS) [ 0.176015] KVM setup async PF for cpu 1 [ 0.176015] KVM setup async PF for cpu 1 [ 0.177000] kvm-stealtime: cpu 1, msr 1250da40 [ 0.177000] kvm-stealtime: cpu 1, msr 1250da40 [ 0.181794] gcov: version magic: 0x3430392a [ 0.181794] gcov: version magic: 0x3430392a [ 0.212404] regulator-dummy: no parameters [ 0.212404] regulator-dummy: no parameters [ 0.215602] NET: Registered protocol family 16 [ 0.215602] NET: Registered protocol family 16 [ 0.232049] double fault: ffff [#1] [ 0.232049] double fault: ffff [#1] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.233000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.233000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.233000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.233000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.233000] RIP: 0010:[<ffffffff818273f5>] [ 0.233000] RIP: 0010:[<ffffffff818273f5>] [<ffffffff818273f5>] trace_hardirqs_off_thunk+0x35/0x3c [<ffffffff818273f5>] trace_hardirqs_off_thunk+0x35/0x3c [ 0.233000] RSP: 0000:ffff880012500000 EFLAGS: 00010086 [ 0.233000] RSP: 0000:ffff880012500000 EFLAGS: 00010086 [ 0.233000] RAX: 0000000082767ff0 RBX: 0000000000000001 RCX: ffffffff82767ff0 [ 0.233000] RAX: 0000000082767ff0 RBX: 0000000000000001 RCX: ffffffff82767ff0 [ 0.233000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82769326 [ 0.233000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82769326 [ 0.233000] RBP: ffff880012500110 R08: 0000000000000000 R09: 0000000000000001 [ 0.233000] RBP: ffff880012500110 R08: 0000000000000000 R09: 0000000000000001 [ 0.233000] R10: ffff880012503e98 R11: ffffffff838c7fb0 R12: 0000000000013ec0 [ 0.233000] R10: ffff880012503e98 R11: ffffffff838c7fb0 R12: 0000000000013ec0 [ 0.233000] R13: 0000000000013ec0 R14: 0000000000000000 R15: 0000000000000000 [ 0.233000] R13: 0000000000013ec0 R14: 0000000000000000 R15: 0000000000000000
BUG: kernel boot hang
Elapsed time: 305
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3/.vmlinuz-b8a868e9ea876a1b40020397305533c095921d7a-20141004114524-27-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-lkp-nex04-129 -serial file:/dev/shm/kboot/serial-quantal-lkp-nex04-129 -daemonize -display none -monitor null
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.17.0-rc7-00003-g598d570a (kbuild@lkp-hsx02) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP PREEMPT Sat Oct 4 11:55:11 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3/.vmlinuz-598d570a05cd31500fb15a843a92f68ddb1b3618-20141004115902-9-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0653f000, 0x0653ffff] PGTABLE [ 0.000000] BRK [0x06540000, 0x06540fff] PGTABLE [ 0.000000] BRK [0x06541000, 0x06541fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 4k [ 0.000000] BRK [0x06542000, 0x06542fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 4k [ 0.000000] BRK [0x06543000, 0x06543fff] PGTABLE [ 0.000000] BRK [0x06544000, 0x06544fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13fdffff] [ 0.000000] [mem 0x12800000-0x13fdffff] page 4k [ 0.000000] RAMDISK: [mem 0x12925000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdffff] [ 0.000000] NODE_DATA [mem 0x128ff000-0x12924fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1287f001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011800000-ffff880011dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57c000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880012400000 s85120 r0 d21376 u1048576 [ 0.000000] pcpu-alloc: s85120 r0 d21376 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1240da40 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3/.vmlinuz-598d570a05cd31500fb15a843a92f68ddb1b3618-20141004115902-9-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 208792K/327160K available (23975K kernel code, 17422K rwdata, 16356K rodata, 2748K init, 26136K bss, 118368K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:56 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.17.0-rc7-00003-g598d570a (kbuild@lkp-hsx02) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP PREEMPT Sat Oct 4 11:55:11 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3/.vmlinuz-598d570a05cd31500fb15a843a92f68ddb1b3618-20141004115902-9-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0653f000, 0x0653ffff] PGTABLE [ 0.000000] BRK [0x06540000, 0x06540fff] PGTABLE [ 0.000000] BRK [0x06541000, 0x06541fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 4k [ 0.000000] BRK [0x06542000, 0x06542fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 4k [ 0.000000] BRK [0x06543000, 0x06543fff] PGTABLE [ 0.000000] BRK [0x06544000, 0x06544fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13fdffff] [ 0.000000] [mem 0x12800000-0x13fdffff] page 4k [ 0.000000] RAMDISK: [mem 0x12925000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdffff] [ 0.000000] NODE_DATA [mem 0x128ff000-0x12924fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1287f001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011800000-ffff880011dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57c000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880012400000 s85120 r0 d21376 u1048576 [ 0.000000] pcpu-alloc: s85120 r0 d21376 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1240da40 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3/.vmlinuz-598d570a05cd31500fb15a843a92f68ddb1b3618-20141004115902-9-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 208792K/327160K available (23975K kernel code, 17422K rwdata, 16356K rodata, 2748K init, 26136K bss, 118368K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:56 0 [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2260.998 MHz processor [ 0.000000] tsc: Detected 2260.998 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. [ 0.003000] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=2260998) 4521.99 BogoMIPS (lpj=2260998) [ 0.006023] pid_max: default: 4096 minimum: 301 [ 0.006023] pid_max: default: 4096 minimum: 301 [ 0.008109] ACPI: Core revision 20140724 [ 0.008109] ACPI: Core revision 20140724 [ 0.026086] ACPI: [ 0.026086] ACPI: All ACPI Tables successfully acquiredAll ACPI Tables successfully acquired
[ 0.029847] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.029847] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.031739] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.031739] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.033295] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.033295] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.034119] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.034119] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.038450] Initializing cgroup subsys freezer [ 0.038450] Initializing cgroup subsys freezer [ 0.039172] Initializing cgroup subsys net_cls [ 0.039172] Initializing cgroup subsys net_cls [ 0.040116] Initializing cgroup subsys perf_event [ 0.040116] Initializing cgroup subsys perf_event [ 0.041050] Initializing cgroup subsys net_prio [ 0.041050] Initializing cgroup subsys net_prio [ 0.042086] Initializing cgroup subsys debug [ 0.042086] Initializing cgroup subsys debug [ 0.044229] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.044229] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.045028] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.045028] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.045028] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.045028] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.046231] debug: unmapping init [mem 0xffffffff84bb4000-0xffffffff84bb8fff] [ 0.046231] debug: unmapping init [mem 0xffffffff84bb4000-0xffffffff84bb8fff] [ 0.050749] Getting VERSION: 1050014 [ 0.050749] Getting VERSION: 1050014 [ 0.051061] Getting VERSION: 1050014 [ 0.051061] Getting VERSION: 1050014 [ 0.052026] Getting ID: 0 [ 0.052026] Getting ID: 0 [ 0.053045] Getting ID: ff000000 [ 0.053045] Getting ID: ff000000 [ 0.055042] Getting LVT0: 8700 [ 0.055042] Getting LVT0: 8700 [ 0.056022] Getting LVT1: 8400 [ 0.056022] Getting LVT1: 8400 [ 0.057120] enabled ExtINT on CPU#0 [ 0.057120] enabled ExtINT on CPU#0 [ 0.060418] ENABLING IO-APIC IRQs [ 0.060418] ENABLING IO-APIC IRQs [ 0.061166] init IO_APIC IRQs [ 0.061166] init IO_APIC IRQs [ 0.062044] apic 0 pin 0 not connected [ 0.062044] apic 0 pin 0 not connected [ 0.063238] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.063238] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.064118] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.064118] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.065133] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.065133] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.066142] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.066142] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.068024] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.068024] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.069127] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.069127] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.070089] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.070089] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.071134] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.071134] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.072061] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.072061] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.074024] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.074024] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.075109] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.075109] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.076132] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.076132] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.077136] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.077136] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.078143] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.078143] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.080065] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.080065] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.082022] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.082022] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.083095] apic 0 pin 16 not connected [ 0.083095] apic 0 pin 16 not connected [ 0.084015] apic 0 pin 17 not connected [ 0.084015] apic 0 pin 17 not connected [ 0.085014] apic 0 pin 18 not connected [ 0.085014] apic 0 pin 18 not connected [ 0.086015] apic 0 pin 19 not connected [ 0.086015] apic 0 pin 19 not connected [ 0.087046] apic 0 pin 20 not connected [ 0.087046] apic 0 pin 20 not connected [ 0.088029] apic 0 pin 21 not connected [ 0.088029] apic 0 pin 21 not connected [ 0.089017] apic 0 pin 22 not connected [ 0.089017] apic 0 pin 22 not connected [ 0.090015] apic 0 pin 23 not connected [ 0.090015] apic 0 pin 23 not connected [ 0.091248] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.091248] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092035] smpboot: CPU0: [ 0.092035] smpboot: CPU0: Intel Intel Common KVM processorCommon KVM processor (fam: 0f, model: 06 (fam: 0f, model: 06, stepping: 01) , stepping: 01) [ 0.096017] Using local APIC timer interrupts. [ 0.096017] calibrating APIC timer ... [ 0.096017] Using local APIC timer interrupts. [ 0.096017] calibrating APIC timer ... [ 0.098000] ... lapic delta = 23062386 [ 0.098000] ... lapic delta = 23062386 [ 0.098000] ... PM-Timer delta = 1320851 [ 0.098000] ... PM-Timer delta = 1320851 [ 0.098000] APIC calibration not consistent with PM-Timer: 368ms instead of 100ms [ 0.098000] APIC calibration not consistent with PM-Timer: 368ms instead of 100ms [ 0.098000] APIC delta adjusted to PM-Timer: 6249965 (23062386) [ 0.098000] APIC delta adjusted to PM-Timer: 6249965 (23062386) [ 0.098000] TSC delta adjusted to PM-Timer: 226100273 (834310477) [ 0.098000] TSC delta adjusted to PM-Timer: 226100273 (834310477) [ 0.098000] ..... delta 6249965 [ 0.098000] ..... delta 6249965 [ 0.098000] ..... mult: 268433952 [ 0.098000] ..... mult: 268433952 [ 0.098000] ..... calibration result: 999994 [ 0.098000] ..... calibration result: 999994 [ 0.098000] ..... CPU clock speed is 2261.0002 MHz. [ 0.098000] ..... CPU clock speed is 2261.0002 MHz. [ 0.098000] ..... host bus clock speed is 999.0994 MHz. [ 0.098000] ..... host bus clock speed is 999.0994 MHz. [ 0.098251] Performance Events: [ 0.098251] Performance Events: unsupported Netburst CPU model 6 unsupported Netburst CPU model 6 no PMU driver, software events only. no PMU driver, software events only. [ 0.110119] [ 0.110119] ********************************************************** [ 0.110119] [ 0.110119] ********************************************************** [ 0.111015] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.111015] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.112031] ** ** [ 0.112031] ** ** [ 0.113034] ** trace_printk() being used. Allocating extra memory. ** [ 0.113034] ** trace_printk() being used. Allocating extra memory. ** [ 0.114027] ** ** [ 0.114027] ** ** [ 0.115031] ** This means that this is a DEBUG kernel and it is ** [ 0.115031] ** This means that this is a DEBUG kernel and it is ** [ 0.117022] ** unsafe for produciton use. ** [ 0.117022] ** unsafe for produciton use. ** [ 0.118026] ** ** [ 0.118026] ** ** [ 0.119027] ** If you see this message and you are not debugging ** [ 0.119027] ** If you see this message and you are not debugging ** [ 0.120039] ** the kernel, report this immediately to your vendor! ** [ 0.120039] ** the kernel, report this immediately to your vendor! ** [ 0.121027] ** ** [ 0.121027] ** ** [ 0.122034] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.122034] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.123035] ********************************************************** [ 0.123035] ********************************************************** [ 0.130542] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.130542] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.137619] x86: Booting SMP configuration: [ 0.137619] x86: Booting SMP configuration: [ 0.138044] .... node #0, CPUs: [ 0.138044] .... node #0, CPUs: #1 #1 [ 0.003000] kvm-clock: cpu 1, msr 0:1287f041, secondary cpu clock [ 0.003000] masked ExtINT on CPU#1 [ 0.003000] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.157451] x86: Booted up 1 node, 2 CPUs [ 0.157451] x86: Booted up 1 node, 2 CPUs [ 0.159012] smpboot: Total of 2 processors activated (9043.99 BogoMIPS) [ 0.159012] smpboot: Total of 2 processors activated (9043.99 BogoMIPS) [ 0.159017] KVM setup async PF for cpu 1 [ 0.159017] KVM setup async PF for cpu 1 [ 0.159028] kvm-stealtime: cpu 1, msr 1250da40 [ 0.159028] kvm-stealtime: cpu 1, msr 1250da40 [ 0.171423] gcov: version magic: 0x3430392a [ 0.171423] gcov: version magic: 0x3430392a [ 0.201603] regulator-dummy: no parameters [ 0.201603] regulator-dummy: no parameters [ 0.203688] NET: Registered protocol family 16 [ 0.203688] NET: Registered protocol family 16 [ 0.223102] ACPI: bus type PCI registered [ 0.223102] ACPI: bus type PCI registered [ 0.226061] dca service started, version 1.12.1 [ 0.226061] dca service started, version 1.12.1 [ 0.229192] PCI: Using configuration type 1 for base access [ 0.229192] PCI: Using configuration type 1 for base access [ 0.410654] ACPI: Added _OSI(Module Device) [ 0.410654] ACPI: Added _OSI(Module Device) [ 0.411017] ACPI: Added _OSI(Processor Device) [ 0.411017] ACPI: Added _OSI(Processor Device) [ 0.412022] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.412022] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.413029] ACPI: Added _OSI(Processor Aggregator Device) [ 0.413029] ACPI: Added _OSI(Processor Aggregator Device) [ 0.453485] ACPI: Interpreter enabled [ 0.453485] ACPI: Interpreter enabled [ 0.454078] ACPI: (supports S0 S5) [ 0.454078] ACPI: (supports S0 S5) [ 0.455019] ACPI: Using IOAPIC for interrupt routing [ 0.455019] ACPI: Using IOAPIC for interrupt routing [ 0.456190] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.456190] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.502724] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.502724] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.503080] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.503080] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.505285] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.505285] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.510036] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.510036] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.512827] PCI host bridge to bus 0000:00 [ 0.512827] PCI host bridge to bus 0000:00 [ 0.513031] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.513031] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.514021] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.514021] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.515056] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] [ 0.515056] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] [ 0.516027] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] [ 0.516027] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] [ 0.518045] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] [ 0.518045] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] [ 0.519077] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] [ 0.519077] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] [ 0.520026] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.520026] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.521025] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff] [ 0.521025] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff] [ 0.523232] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.523232] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.526720] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.526720] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.531179] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.531179] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.537039] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.537039] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.541046] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.541046] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.542022] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.542022] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.543022] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.543022] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.544026] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.544026] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.547470] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.547470] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.549348] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.549348] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.550092] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.550092] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.552911] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.552911] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.557048] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.557048] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.560035] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.560035] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.571920] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.571920] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.573949] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.573949] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.576051] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.576051] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.578904] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.578904] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.588038] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.588038] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.593091] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.593091] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.595025] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.595025] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.608868] ACPI: PCI Interrupt Link [LNKA] (IRQs [ 0.608868] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 5 *10 *10 11 11))
[ 0.610909] ACPI: PCI Interrupt Link [LNKB] (IRQs [ 0.610909] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 5 *10 *10 11 11))
[ 0.612786] ACPI: PCI Interrupt Link [LNKC] (IRQs [ 0.612786] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 5 10 10 *11 *11))
[ 0.614635] ACPI: PCI Interrupt Link [LNKD] (IRQs [ 0.614635] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 5 10 10 *11 *11))
[ 0.616579] ACPI: PCI Interrupt Link [LNKS] (IRQs [ 0.616579] ACPI: PCI Interrupt Link [LNKS] (IRQs *9 *9))
[ 0.629058] SCSI subsystem initialized [ 0.629058] SCSI subsystem initialized [ 0.630411] ACPI: bus type USB registered [ 0.630411] ACPI: bus type USB registered [ 0.631229] usbcore: registered new interface driver usbfs [ 0.631229] usbcore: registered new interface driver usbfs [ 0.633236] usbcore: registered new interface driver hub [ 0.633236] usbcore: registered new interface driver hub [ 0.634340] usbcore: registered new device driver usb [ 0.634340] usbcore: registered new device driver usb [ 0.635749] pps_core: LinuxPPS API ver. 1 registered [ 0.635749] pps_core: LinuxPPS API ver. 1 registered [ 0.637021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.637021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.638106] PTP clock support registered [ 0.638106] PTP clock support registered [ 0.640859] wmi: Mapper loaded [ 0.640859] wmi: Mapper loaded [ 0.644374] PCI: Using ACPI for IRQ routing [ 0.644374] PCI: Using ACPI for IRQ routing [ 0.645024] PCI: pci_cache_line_size set to 64 bytes [ 0.645024] PCI: pci_cache_line_size set to 64 bytes [ 0.647128] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.647128] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.648082] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff] [ 0.648082] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff] [ 0.651896] NET: Registered protocol family 23 [ 0.651896] NET: Registered protocol family 23 [ 0.652209] Bluetooth: Core ver 2.19 [ 0.652209] Bluetooth: Core ver 2.19 [ 0.653153] NET: Registered protocol family 31 [ 0.653153] NET: Registered protocol family 31 [ 0.654045] Bluetooth: HCI device and connection manager initialized [ 0.654045] Bluetooth: HCI device and connection manager initialized [ 0.655136] Bluetooth: HCI socket layer initialized [ 0.655136] Bluetooth: HCI socket layer initialized [ 0.656026] Bluetooth: L2CAP socket layer initialized [ 0.656026] Bluetooth: L2CAP socket layer initialized [ 0.657267] Bluetooth: SCO socket layer initialized [ 0.657267] Bluetooth: SCO socket layer initialized [ 0.660086] NET: Registered protocol family 8 [ 0.660086] NET: Registered protocol family 8 [ 0.661021] NET: Registered protocol family 20 [ 0.661021] NET: Registered protocol family 20 [ 0.665365] hpet0: at MMIO 0xfed00000, IRQs [ 0.665365] hpet0: at MMIO 0xfed00000, IRQs 2 2, 8, 8, 0, 0
[ 0.667489] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.667489] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.675485] Switched to clocksource kvm-clock [ 0.675485] Switched to clocksource kvm-clock [ 0.678588] Warning: could not register all branches stats [ 0.678588] Warning: could not register all branches stats [ 0.680611] Warning: could not register annotated branches stats [ 0.680611] Warning: could not register annotated branches stats [ 1.519728] FS-Cache: Loaded [ 1.519728] FS-Cache: Loaded [ 1.520977] pnp: PnP ACPI init [ 1.520977] pnp: PnP ACPI init [ 1.522419] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.522419] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.548981] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.548981] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.551438] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.551438] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.568891] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.568891] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.571340] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.571340] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.588681] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.588681] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.591176] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.591176] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.613886] pnp 00:03: [dma 2] [ 1.613886] pnp 00:03: [dma 2] [ 1.615216] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.615216] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.628012] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 1.628012] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 1.630966] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.630966] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.653794] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 1.653794] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 1.679738] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.679738] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.702683] pnp: PnP ACPI: found 6 devices [ 1.702683] pnp: PnP ACPI: found 6 devices [ 1.750440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.750440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.763443] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 1.763443] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 1.765337] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 1.765337] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 1.774055] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 1.774055] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 1.786142] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 1.786142] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 1.788032] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 1.788032] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 1.790131] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 1.790131] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 1.792421] NET: Registered protocol family 1 [ 1.792421] NET: Registered protocol family 1 [ 1.833153] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.833153] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.835188] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.835188] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.839213] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.839213] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.841338] pci 0000:00:02.0: Video device with shadowed ROM [ 1.841338] pci 0000:00:02.0: Video device with shadowed ROM [ 1.847638] PCI: CLS 0 bytes, default 64 [ 1.847638] PCI: CLS 0 bytes, default 64 [ 1.850211] Trying to unpack rootfs image as initramfs... [ 1.850211] Trying to unpack rootfs image as initramfs... [ 11.841103] debug: unmapping init [mem 0xffff880012925000-0xffff880013fd7fff] [ 11.841103] debug: unmapping init [mem 0xffff880012925000-0xffff880013fd7fff] [ 11.899116] Scanning for low memory corruption every 60 seconds [ 11.899116] Scanning for low memory corruption every 60 seconds [ 11.923927] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 11.923927] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 11.928364] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 11.928364] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 11.969086] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 11.969086] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 11.989427] PCLMULQDQ-NI instructions are not detected. [ 11.989427] PCLMULQDQ-NI instructions are not detected. [ 11.991141] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 11.991141] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 12.003089] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 12.003089] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 12.005404] AVX or AES-NI instructions are not detected. [ 12.005404] AVX or AES-NI instructions are not detected. [ 12.012444] AVX instructions are not detected. [ 12.012444] AVX instructions are not detected. [ 12.014062] AVX instructions are not detected. [ 12.014062] AVX instructions are not detected. [ 12.053860] AVX instructions are not detected. [ 12.053860] AVX instructions are not detected. [ 12.055368] AVX2 instructions are not detected. [ 12.055368] AVX2 instructions are not detected. [ 12.057020] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 [ 12.057020] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 [ 12.102135] rcu-torture: Creating rcu_torture_writer task [ 12.102135] rcu-torture: Creating rcu_torture_writer task [ 12.136326] rcu-torture: Creating rcu_torture_fakewriter task [ 12.136326] rcu-torture: Creating rcu_torture_fakewriter task [ 12.138316] rcu-torture: rcu_torture_writer task started [ 12.138316] rcu-torture: rcu_torture_writer task started [ 12.144437] rcu-torture: Creating rcu_torture_fakewriter task [ 12.144437] rcu-torture: Creating rcu_torture_fakewriter task [ 12.162481] rcu-torture: rcu_torture_fakewriter task started [ 12.162481] rcu-torture: rcu_torture_fakewriter task started [ 12.164992] rcu-torture: rcu_torture_fakewriter task started [ 12.164992] rcu-torture: rcu_torture_fakewriter task started [ 12.174689] rcu-torture: Creating rcu_torture_fakewriter task [ 12.174689] rcu-torture: Creating rcu_torture_fakewriter task [ 12.187173] rcu-torture: Creating rcu_torture_fakewriter task [ 12.187173] rcu-torture: Creating rcu_torture_fakewriter task [ 12.189267] rcu-torture: rcu_torture_fakewriter task started [ 12.189267] rcu-torture: rcu_torture_fakewriter task started [ 12.195965] rcu-torture: Creating rcu_torture_reader task [ 12.195965] rcu-torture: Creating rcu_torture_reader task [ 12.197820] rcu-torture: rcu_torture_fakewriter task started [ 12.197820] rcu-torture: rcu_torture_fakewriter task started [ 12.226810] rcu-torture: Creating rcu_torture_stats task [ 12.226810] rcu-torture: Creating rcu_torture_stats task [ 12.241095] rcu-torture: rcu_torture_reader task started [ 12.241095] rcu-torture: rcu_torture_reader task started [ 12.243257] rcu-torture: Creating torture_shuffle task [ 12.243257] rcu-torture: Creating torture_shuffle task [ 12.245155] rcu-torture: rcu_torture_stats task started [ 12.245155] rcu-torture: rcu_torture_stats task started [ 12.259429] rcu-torture: Creating torture_stutter task [ 12.259429] rcu-torture: Creating torture_stutter task [ 12.261437] rcu-torture: torture_shuffle task started [ 12.261437] rcu-torture: torture_shuffle task started [ 12.276895] futex hash table entries: 16 (order: -1, 2048 bytes) [ 12.276895] futex hash table entries: 16 (order: -1, 2048 bytes) [ 12.278728] rcu-torture: torture_stutter task started [ 12.278728] rcu-torture: torture_stutter task started [ 12.285728] audit: initializing netlink subsys (disabled) [ 12.285728] audit: initializing netlink subsys (disabled) [ 12.293740] audit: type=2000 audit(1412395372.198:1): initialized [ 12.293740] audit: type=2000 audit(1412395372.198:1): initialized [ 12.910267] tsc: Refined TSC clocksource calibration: 2260.999 MHz [ 12.910267] tsc: Refined TSC clocksource calibration: 2260.999 MHz [ 27.048150] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 27.048150] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 27.290141] zpool: loaded [ 27.290141] zpool: loaded [ 27.293320] zbud: loaded [ 27.293320] zbud: loaded [ 27.299117] VFS: Disk quotas dquot_6.5.2 [ 27.299117] VFS: Disk quotas dquot_6.5.2 [ 27.308800] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 27.308800] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 27.323129] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 27.323129] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 27.378484] efs: 1.0a - http://aeschi.ch.eu.org/efs/ [ 27.378484] efs: 1.0a - http://aeschi.ch.eu.org/efs/ [ 27.389864] QNX4 filesystem 0.2.3 registered. [ 27.389864] QNX4 filesystem 0.2.3 registered. [ 27.404331] SGI XFS with ACLs, security attributes, realtime, debug enabled [ 27.404331] SGI XFS with ACLs, security attributes, realtime, debug enabled [ 27.452349] befs: version: 0.9.3 [ 27.452349] befs: version: 0.9.3 [ 27.475855] ocfs2 stack glue: unable to register sysctl [ 27.475855] ocfs2 stack glue: unable to register sysctl [ 27.477692] ocfs2: Registered cluster interface o2cb [ 27.477692] ocfs2: Registered cluster interface o2cb [ 27.495703] OCFS2 User DLM kernel interface loaded [ 27.495703] OCFS2 User DLM kernel interface loaded [ 27.541314] gfs2: GFS2 installed [ 27.541314] gfs2: GFS2 installed [ 28.138183] NET: Registered protocol family 38 [ 28.138183] NET: Registered protocol family 38 [ 28.152648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 28.152648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 28.161957] io scheduler noop registered (default) [ 28.161957] io scheduler noop registered (default) [ 28.165901] io scheduler cfq registered [ 28.165901] io scheduler cfq registered [ 28.167258] start plist test [ 28.167258] start plist test [ 28.244513] end plist test [ 28.244513] end plist test [ 28.247626] test_string_helpers: Running tests... [ 28.247626] test_string_helpers: Running tests... [ 28.249908] rbtree testing [ 28.249908] rbtree testing -> 192357 cycles -> 192357 cycles [ 37.606451] augmented rbtree testing [ 37.606451] augmented rbtree testing -> 191732 cycles -> 191732 cycles [ 46.962787] rivafb_setup START [ 46.962787] rivafb_setup START [ 46.964830] vmlfb: initializing [ 46.964830] vmlfb: initializing [ 46.966159] Could not find Carillo Ranch MCH device. [ 46.966159] Could not find Carillo Ranch MCH device. [ 46.968214] no IO addresses supplied [ 46.968214] no IO addresses supplied [ 46.969891] hgafb: HGA card not detected. [ 46.969891] hgafb: HGA card not detected. [ 46.971333] hgafb: probe of hgafb.0 failed with error -22 [ 46.971333] hgafb: probe of hgafb.0 failed with error -22 [ 46.973829] usbcore: registered new interface driver udlfb [ 46.973829] usbcore: registered new interface driver udlfb [ 46.975825] usbcore: registered new interface driver smscufx [ 46.975825] usbcore: registered new interface driver smscufx [ 46.994737] uvesafb: failed to execute /sbin/v86d [ 46.994737] uvesafb: failed to execute /sbin/v86d [ 46.996750] uvesafb: make sure that the v86d helper is installed and executable [ 46.996750] uvesafb: make sure that the v86d helper is installed and executable [ 47.003853] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 47.003853] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 47.006623] uvesafb: vbe_init() failed with -22 [ 47.006623] uvesafb: vbe_init() failed with -22 [ 47.016157] uvesafb: probe of uvesafb.0 failed with error -22 [ 47.016157] uvesafb: probe of uvesafb.0 failed with error -22 [ 47.032199] ipmi message handler version 39.2 [ 47.032199] ipmi message handler version 39.2 [ 47.034152] IPMI System Interface driver. [ 47.034152] IPMI System Interface driver. [ 47.036245] ipmi_si: Adding default-specified kcs state machine [ 47.036245] ipmi_si: Adding default-specified kcs state machine
[ 47.038749] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 47.038749] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 47.055309] ipmi_si: Interface detection failed [ 47.055309] ipmi_si: Interface detection failed [ 47.091910] ipmi_si: Adding default-specified smic state machine [ 47.091910] ipmi_si: Adding default-specified smic state machine
[ 47.094447] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 47.094447] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 47.098674] ipmi_si: Interface detection failed [ 47.098674] ipmi_si: Interface detection failed [ 47.103254] ipmi_si: Adding default-specified bt state machine [ 47.103254] ipmi_si: Adding default-specified bt state machine
[ 47.105745] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 47.105745] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 47.109893] ipmi_si: Interface detection failed [ 47.109893] ipmi_si: Interface detection failed [ 47.119831] ipmi_si: Unable to find any System Interface(s) [ 47.119831] ipmi_si: Unable to find any System Interface(s) [ 47.122510] IPMI Watchdog: driver initialized [ 47.122510] IPMI Watchdog: driver initialized [ 47.124368] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 47.124368] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 47.144922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 47.144922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 47.147954] ACPI: Power Button [PWRF] [ 47.147954] ACPI: Power Button [PWRF] [ 47.151855] button: probe of LNXPWRBN:00 failed with error -22 [ 47.151855] button: probe of LNXPWRBN:00 failed with error -22 [ 47.172953] GHES: HEST is not enabled! [ 47.172953] GHES: HEST is not enabled! [ 47.174547] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 47.174547] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 47.179323] xenfs: not registering filesystem on non-xen platform [ 47.179323] xenfs: not registering filesystem on non-xen platform [ 47.386715] HDLC line discipline maxframe=4096 [ 47.386715] HDLC line discipline maxframe=4096 [ 47.392716] N_HDLC line discipline registered. [ 47.392716] N_HDLC line discipline registered. [ 47.394615] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 47.394615] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 47.400935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 47.400935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 47.479737] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 47.479737] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 47.492594] Cyclades driver 2.6 [ 47.492594] Cyclades driver 2.6 [ 47.494662] MOXA Intellio family driver version 6.0k [ 47.494662] MOXA Intellio family driver version 6.0k [ 47.500296] Initializing Nozomi driver 2.1d [ 47.500296] Initializing Nozomi driver 2.1d [ 47.504354] RocketPort device driver module, version 2.09, 12-June-2003 [ 47.504354] RocketPort device driver module, version 2.09, 12-June-2003 [ 47.512409] No rocketport ports found; unloading driver [ 47.512409] No rocketport ports found; unloading driver [ 47.516722] SyncLink GT [ 47.516722] SyncLink GT [ 47.518920] SyncLink GT, tty major#247 [ 47.518920] SyncLink GT, tty major#247 [ 47.523903] SyncLink GT no devices found [ 47.523903] SyncLink GT no devices found [ 47.529329] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 47.529329] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 47.535641] ac.o: No PCI boards found. [ 47.535641] ac.o: No PCI boards found. [ 47.538421] ac.o: For an ISA board you must supply memory and irq parameters. [ 47.538421] ac.o: For an ISA board you must supply memory and irq parameters. [ 47.547626] Non-volatile memory driver v1.3 [ 47.547626] Non-volatile memory driver v1.3 [ 47.553819] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 47.553819] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 47.559336] smapi::smapi_init, ERROR invalid usSmapiID [ 47.559336] smapi::smapi_init, ERROR invalid usSmapiID [ 47.563789] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 47.563789] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 47.572112] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 47.572112] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 47.578350] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 47.578350] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 47.585274] Linux agpgart interface v0.103 [ 47.585274] Linux agpgart interface v0.103 [ 47.591197] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 47.591197] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 47.598799] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 47.598799] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 47.611114] intelfb: Version 0.9.6 [ 47.611114] intelfb: Version 0.9.6 [ 47.704207] brd: module loaded [ 47.704207] brd: module loaded [ 47.734975] loop: module loaded [ 47.734975] loop: module loaded [ 47.741005] skd: v2.2.1-b0260 loaded [ 47.741005] skd: v2.2.1-b0260 loaded [ 47.742708] MM: desc_per_page = 128 [ 47.742708] MM: desc_per_page = 128 [ 47.751326] nbd: registered device at major 43 [ 47.751326] nbd: registered device at major 43 [ 47.789395] mtip32xx Version 1.3.1 [ 47.789395] mtip32xx Version 1.3.1 [ 47.797732] nullb0: unknown partition table [ 47.797732] nullb0: unknown partition table [ 47.809530] nullb1: unknown partition table [ 47.809530] nullb1: unknown partition table [ 47.812113] null: module loaded [ 47.812113] null: module loaded [ 47.813388] dummy-irq: no IRQ given. Use irq=N [ 47.813388] dummy-irq: no IRQ given. Use irq=N [ 47.819971] Phantom Linux Driver, version n0.9.8, init OK [ 47.819971] Phantom Linux Driver, version n0.9.8, init OK [ 47.828184] Guest personality initialized and is inactive [ 47.828184] Guest personality initialized and is inactive [ 47.830738] VMCI host device registered (name=vmci, major=10, minor=61) [ 47.830738] VMCI host device registered (name=vmci, major=10, minor=61) [ 47.837622] Initialized host personality [ 47.837622] Initialized host personality [ 47.843675] usbcore: registered new interface driver rtsx_usb [ 47.843675] usbcore: registered new interface driver rtsx_usb [ 47.847219] usbcore: registered new interface driver viperboard [ 47.847219] usbcore: registered new interface driver viperboard [ 47.853820] Uniform Multi-Platform E-IDE driver [ 47.853820] Uniform Multi-Platform E-IDE driver [ 47.860190] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 47.860190] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 47.868130] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 47.868130] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 47.876109] ide0: BM-DMA at 0xc040-0xc047 [ 47.876109] ide0: BM-DMA at 0xc040-0xc047 [ 47.877921] ide1: BM-DMA at 0xc048-0xc04f [ 47.877921] ide1: BM-DMA at 0xc048-0xc04f [ 47.883804] Probing IDE interface ide0... [ 47.883804] Probing IDE interface ide0... [ 48.425806] Probing IDE interface ide1... [ 48.425806] Probing IDE interface ide1... [ 49.124241] hdc: QEMU DVD-ROM, ATAPI [ 49.124241] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROMCD/DVD-ROM drive drive [ 49.743467] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 49.743467] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 49.746414] hdc: MWDMA2 mode selected [ 49.746414] hdc: MWDMA2 mode selected [ 49.748377] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 49.748377] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 49.750501] ide1 at 0x170-0x177,0x376 on irq 15 [ 49.750501] ide1 at 0x170-0x177,0x376 on irq 15
[ 49.760929] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 49.760929] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 49.769238] ide-gd driver 1.18 [ 49.769238] ide-gd driver 1.18 [ 49.770717] ide-cd driver 5.00 [ 49.770717] ide-cd driver 5.00 [ 49.781291] ide-cd: hdc: ATAPI [ 49.781291] ide-cd: hdc: ATAPI 4X 4X DVD-ROM DVD-ROM drive drive, 512kB Cache , 512kB Cache [ 49.792962] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 49.792962] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 49.817447] Loading iSCSI transport class v2.0-870. [ 49.817447] Loading iSCSI transport class v2.0-870. [ 49.829407] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 49.829407] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 49.841993] Detecting Adaptec I2O RAID controllers... [ 49.841993] Detecting Adaptec I2O RAID controllers... [ 49.844489] Adaptec aacraid driver 1.2-0[30300]-ms [ 49.844489] Adaptec aacraid driver 1.2-0[30300]-ms [ 49.846816] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 49.846816] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 49.850094] scsi: <fdomain> Detection failed (no card) [ 49.850094] scsi: <fdomain> Detection failed (no card) [ 49.852838] megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014 [ 49.852838] megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014 [ 49.868512] mpt2sas version 16.100.00.00 loaded [ 49.868512] mpt2sas version 16.100.00.00 loaded [ 49.870777] mpt3sas version 02.100.00.00 loaded [ 49.870777] mpt3sas version 02.100.00.00 loaded [ 49.873626] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 49.873626] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 49.876733] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 49.876733] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 49.897091] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 49.897091] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 49.900336] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 49.900336] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 49.903459] iscsi: registered transport (bnx2i) [ 49.903459] iscsi: registered transport (bnx2i) [ 49.923948] iscsi: registered transport (be2iscsi) [ 49.923948] iscsi: registered transport (be2iscsi) [ 49.925970] In beiscsi_module_init, tt=ffffffff83d4f180 [ 49.925970] In beiscsi_module_init, tt=ffffffff83d4f180 [ 49.928531] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 49.928531] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 49.932403] VMware PVSCSI driver - version 1.0.5.0-k [ 49.932403] VMware PVSCSI driver - version 1.0.5.0-k [ 49.952709] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 49.952709] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 49.955853] SCSI Media Changer driver v0.25 [ 49.955853] SCSI Media Changer driver v0.25 [ 50.008246] scsi_debug: host protection [ 50.008246] scsi_debug: host protection [ 50.009925] scsi host0: scsi_debug, version 1.84 [20140706], dev_size_mb=8, opts=0x0 [ 50.009925] scsi host0: scsi_debug, version 1.84 [20140706], dev_size_mb=8, opts=0x0 [ 50.023851] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0184 PQ: 0 ANSI: 5 [ 50.023851] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0184 PQ: 0 ANSI: 5 [ 50.038119] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 50.038119] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 50.040975] SSFDC read-only Flash Translation layer [ 50.040975] SSFDC read-only Flash Translation layer [ 50.041438] device id = 2440 [ 50.041438] device id = 2440 [ 50.041451] device id = 2480 [ 50.041451] device id = 2480 [ 50.041464] device id = 24c0 [ 50.041464] device id = 24c0 [ 50.041476] device id = 24d0 [ 50.041476] device id = 24d0 [ 50.041488] device id = 25a1 [ 50.041488] device id = 25a1 [ 50.041500] device id = 2670 [ 50.041500] device id = 2670 [ 50.042141] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 50.042141] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 50.042155] pmc551: not detected [ 50.042155] pmc551: not detected [ 50.071112] sd 0:0:0:0: [sda] Write Protect is off [ 50.071112] sd 0:0:0:0: [sda] Write Protect is off [ 50.081198] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08 [ 50.081198] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08 [ 50.086093] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 50.086093] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 50.108116] sda: unknown partition table [ 50.108116] sda: unknown partition table [ 50.123298] sd 0:0:0:0: [sda] Attached SCSI disk [ 50.123298] sd 0:0:0:0: [sda] Attached SCSI disk [ 50.175547] No valid DiskOnChip devices found [ 50.175547] No valid DiskOnChip devices found [ 50.177849] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.177849] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.181775] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.181775] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.189798] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.189798] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.197816] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.197816] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.205809] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.205809] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.213790] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.213790] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 50.221846] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 50.221846] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 50.228635] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 50.228635] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 50.230537] nand: 128MiB, SLC, page size: 512, OOB size: 16 [ 50.230537] nand: 128MiB, SLC, page size: 512, OOB size: 16 [ 50.237197] flash size: 128 MiB [ 50.237197] flash size: 128 MiB [ 50.238532] page size: 512 bytes [ 50.238532] page size: 512 bytes [ 50.244141] OOB area size: 16 bytes [ 50.244141] OOB area size: 16 bytes [ 50.245627] sector size: 16 KiB [ 50.245627] sector size: 16 KiB [ 50.246964] pages number: 262144 [ 50.246964] pages number: 262144 [ 50.252492] pages per sector: 32 [ 50.252492] pages per sector: 32 [ 50.253870] bus width: 8 [ 50.253870] bus width: 8 [ 50.254957] bits in sector size: 14 [ 50.254957] bits in sector size: 14 [ 50.260615] bits in page size: 9 [ 50.260615] bits in page size: 9 [ 50.261977] bits in OOB size: 4 [ 50.261977] bits in OOB size: 4 [ 50.263296] flash size with OOB: 135168 KiB [ 50.263296] flash size with OOB: 135168 KiB [ 50.269219] page address bytes: 4 [ 50.269219] page address bytes: 4 [ 50.270648] sector address bytes: 3 [ 50.270648] sector address bytes: 3 [ 50.276298] options: 0x42 [ 50.276298] options: 0x42 [ 50.290758] Scanning device for bad blocks [ 50.290758] Scanning device for bad blocks [ 50.642696] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 50.642696] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 50.649153] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 50.649153] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 50.659275] ftl_cs: FTL header not found. [ 50.659275] ftl_cs: FTL header not found. [ 50.673133] eql: Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected]) [ 50.673133] eql: Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected]) [ 50.689356] tun: Universal TUN/TAP device driver, 1.6 [ 50.689356] tun: Universal TUN/TAP device driver, 1.6 [ 50.691426] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 50.691426] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 50.698370] arcnet loaded. [ 50.698370] arcnet loaded. [ 50.703790] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 50.703790] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 50.706850] arcnet: raw mode (`r') encapsulation support loaded. [ 50.706850] arcnet: raw mode (`r') encapsulation support loaded. [ 50.716739] arcnet: COM90xx chipset support [ 50.716739] arcnet: COM90xx chipset support [ 51.322797] S3: No ARCnet cards found. [ 51.322797] S3: No ARCnet cards found. [ 51.328657] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 51.328657] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 51.335797] E-mail me if you actually test this driver, please! [ 51.335797] E-mail me if you actually test this driver, please! [ 51.338370] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 51.338370] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 51.345919] arcnet: RIM I (entirely mem-mapped) support [ 51.345919] arcnet: RIM I (entirely mem-mapped) support [ 51.352288] E-mail me if you actually test the RIM I driver, please! [ 51.352288] E-mail me if you actually test the RIM I driver, please! [ 51.354827] Given: node 00h, shmem 0h, irq 0 [ 51.354827] Given: node 00h, shmem 0h, irq 0 [ 51.360879] No autoprobe for RIM I; you must specify the shmem and irq! [ 51.360879] No autoprobe for RIM I; you must specify the shmem and irq! [ 51.367837] arcnet: COM20020 PCI support [ 51.367837] arcnet: COM20020 PCI support [ 51.369716] vcan: Virtual CAN interface driver [ 51.369716] vcan: Virtual CAN interface driver [ 51.375769] slcan: serial line CAN interface driver [ 51.375769] slcan: serial line CAN interface driver [ 51.377975] slcan: 10 dynamic interface channels. [ 51.377975] slcan: 10 dynamic interface channels. [ 51.384368] CAN device driver interface [ 51.384368] CAN device driver interface [ 51.386310] usbcore: registered new interface driver ems_usb [ 51.386310] usbcore: registered new interface driver ems_usb [ 51.393187] usbcore: registered new interface driver esd_usb2 [ 51.393187] usbcore: registered new interface driver esd_usb2 [ 51.399858] usbcore: registered new interface driver gs_usb [ 51.399858] usbcore: registered new interface driver gs_usb [ 51.402400] usbcore: registered new interface driver kvaser_usb [ 51.402400] usbcore: registered new interface driver kvaser_usb [ 51.409496] usbcore: registered new interface driver peak_usb [ 51.409496] usbcore: registered new interface driver peak_usb [ 51.416154] usbcore: registered new interface driver usb_8dev [ 51.416154] usbcore: registered new interface driver usb_8dev [ 51.418542] sja1000 CAN netdevice driver [ 51.418542] sja1000 CAN netdevice driver [ 51.424375] sja1000_isa: insufficient parameters supplied [ 51.424375] sja1000_isa: insufficient parameters supplied [ 51.432992] cnic: QLogic NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 51.432992] cnic: QLogic NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 51.440845] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 51.440845] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 51.450221] vxge: Copyright(c) 2002-2010 Exar Corp. [ 51.450221] vxge: Copyright(c) 2002-2010 Exar Corp. [ 51.456550] vxge: Driver version: 2.5.3.22640-k [ 51.456550] vxge: Driver version: 2.5.3.22640-k [ 51.458783] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 51.458783] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 51.466120] Solarflare NET driver v4.0 [ 51.466120] Solarflare NET driver v4.0 [ 51.474361] usbcore: registered new interface driver kingsun-sir [ 51.474361] usbcore: registered new interface driver kingsun-sir [ 51.479452] usbcore: registered new interface driver ksdazzle-sir [ 51.479452] usbcore: registered new interface driver ksdazzle-sir [ 51.486321] usbcore: registered new interface driver ks959-sir [ 51.486321] usbcore: registered new interface driver ks959-sir [ 51.492970] PPP generic driver version 2.4.2 [ 51.492970] PPP generic driver version 2.4.2 [ 51.495354] PPP MPPE Compression module registered [ 51.495354] PPP MPPE Compression module registered [ 51.501551] NET: Registered protocol family 24 [ 51.501551] NET: Registered protocol family 24 [ 51.507837] usbcore: registered new interface driver catc [ 51.507837] usbcore: registered new interface driver catc [ 51.510188] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 51.510188] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 51.517523] usbcore: registered new interface driver pegasus [ 51.517523] usbcore: registered new interface driver pegasus [ 51.524093] hso: drivers/net/usb/hso.c: Option Wireless [ 51.524093] hso: drivers/net/usb/hso.c: Option Wireless [ 51.532921] usbcore: registered new interface driver hso [ 51.532921] usbcore: registered new interface driver hso [ 51.548662] usbcore: registered new interface driver cdc_phonet [ 51.548662] usbcore: registered new interface driver cdc_phonet [ 51.551213] usbcore: registered new interface driver ipheth [ 51.551213] usbcore: registered new interface driver ipheth [ 51.555590] Madge ATM Ambassador driver version 1.2.4 [ 51.555590] Madge ATM Ambassador driver version 1.2.4 [ 51.557669] amb: debug bitmap is 0 [ 51.557669] amb: debug bitmap is 0 [ 51.559366] idt77252_init: at ffffffff849c0e8b [ 51.559366] idt77252_init: at ffffffff849c0e8b [ 51.574509] Solos PCI Driver Version 1.04 [ 51.574509] Solos PCI Driver Version 1.04 [ 51.576773] adummy: version 1.0 [ 51.576773] adummy: version 1.0 [ 51.579382] I2O subsystem v1.325 [ 51.579382] I2O subsystem v1.325 [ 51.581404] i2o: max drivers = 8 [ 51.581404] i2o: max drivers = 8 [ 51.584354] I2O Block Device OSM v1.325 [ 51.584354] I2O Block Device OSM v1.325 [ 51.600262] I2O ProcFS OSM v1.316 [ 51.600262] I2O ProcFS OSM v1.316 [ 51.601848] Fusion MPT base driver 3.04.20 [ 51.601848] Fusion MPT base driver 3.04.20 [ 51.603539] Copyright (c) 1999-2008 LSI Corporation [ 51.603539] Copyright (c) 1999-2008 LSI Corporation [ 51.606693] Fusion MPT SPI Host driver 3.04.20 [ 51.606693] Fusion MPT SPI Host driver 3.04.20 [ 51.608809] Fusion MPT SAS Host driver 3.04.20 [ 51.608809] Fusion MPT SAS Host driver 3.04.20 [ 51.626497] usbcore: registered new interface driver hwa-rc [ 51.626497] usbcore: registered new interface driver hwa-rc [ 51.629870] usbcore: registered new interface driver i1480-dfu-usb [ 51.629870] usbcore: registered new interface driver i1480-dfu-usb [ 51.633249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 51.633249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 51.636348] ehci-pci: EHCI PCI platform driver [ 51.636348] ehci-pci: EHCI PCI platform driver [ 51.651921] ehci-platform: EHCI generic platform driver [ 51.651921] ehci-platform: EHCI generic platform driver [ 51.654341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 51.654341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 51.657611] ohci-platform: OHCI generic platform driver [ 51.657611] ohci-platform: OHCI generic platform driver [ 51.659958] uhci_hcd: USB Universal Host Controller Interface driver [ 51.659958] uhci_hcd: USB Universal Host Controller Interface driver [ 51.680788] usbcore: registered new interface driver hwa-hc [ 51.680788] usbcore: registered new interface driver hwa-hc [ 51.683529] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 51.683529] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 51.685966] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 51.685966] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 51.692431] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 51.692431] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 51.711941] usbcore: registered new interface driver cdc_acm [ 51.711941] usbcore: registered new interface driver cdc_acm [ 51.731297] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 51.731297] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 51.734817] usbcore: registered new interface driver usblp [ 51.734817] usbcore: registered new interface driver usblp [ 51.737219] usbcore: registered new interface driver cdc_wdm [ 51.737219] usbcore: registered new interface driver cdc_wdm [ 51.739508] usbcore: registered new interface driver usbtmc [ 51.739508] usbcore: registered new interface driver usbtmc [ 51.742267] usbcore: registered new interface driver usb-storage [ 51.742267] usbcore: registered new interface driver usb-storage [ 51.752829] usbcore: registered new interface driver ums-alauda [ 51.752829] usbcore: registered new interface driver ums-alauda [ 51.755207] usbcore: registered new interface driver ums-datafab [ 51.755207] usbcore: registered new interface driver ums-datafab [ 51.757821] usbcore: registered new interface driver ums-isd200 [ 51.757821] usbcore: registered new interface driver ums-isd200 [ 51.760331] usbcore: registered new interface driver ums-jumpshot [ 51.760331] usbcore: registered new interface driver ums-jumpshot [ 51.762786] usbcore: registered new interface driver ums-karma [ 51.762786] usbcore: registered new interface driver ums-karma [ 51.775298] usbcore: registered new interface driver ums-onetouch [ 51.775298] usbcore: registered new interface driver ums-onetouch [ 51.777954] usbcore: registered new interface driver ums-realtek [ 51.777954] usbcore: registered new interface driver ums-realtek [ 51.780444] usbcore: registered new interface driver ums-sddr55 [ 51.780444] usbcore: registered new interface driver ums-sddr55 [ 51.782800] usbcore: registered new interface driver ums-usbat [ 51.782800] usbcore: registered new interface driver ums-usbat [ 51.785433] usbcore: registered new interface driver mdc800 [ 51.785433] usbcore: registered new interface driver mdc800 [ 51.802941] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 51.802941] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 51.806495] usbcore: registered new interface driver microtekX6 [ 51.806495] usbcore: registered new interface driver microtekX6 [ 51.809694] usbcore: registered new interface driver usbserial [ 51.809694] usbcore: registered new interface driver usbserial [ 51.812407] usbcore: registered new interface driver aircable [ 51.812407] usbcore: registered new interface driver aircable [ 51.829968] usbserial: USB Serial support registered for aircable [ 51.829968] usbserial: USB Serial support registered for aircable [ 51.832473] usbcore: registered new interface driver belkin_sa [ 51.832473] usbcore: registered new interface driver belkin_sa [ 51.835362] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 51.835362] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 51.839434] usbcore: registered new interface driver cp210x [ 51.839434] usbcore: registered new interface driver cp210x [ 51.852322] usbserial: USB Serial support registered for cp210x [ 51.852322] usbserial: USB Serial support registered for cp210x [ 51.855053] usbcore: registered new interface driver cypress_m8 [ 51.855053] usbcore: registered new interface driver cypress_m8 [ 51.864426] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 51.864426] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 51.867754] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 51.867754] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 51.871002] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 51.871002] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 51.874270] usbcore: registered new interface driver digi_acceleport [ 51.874270] usbcore: registered new interface driver digi_acceleport [ 51.889386] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 51.889386] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 51.892805] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 51.892805] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 51.896326] usbcore: registered new interface driver empeg [ 51.896326] usbcore: registered new interface driver empeg [ 51.899307] usbserial: USB Serial support registered for empeg [ 51.899307] usbserial: USB Serial support registered for empeg [ 51.901971] usbcore: registered new interface driver f81232 [ 51.901971] usbcore: registered new interface driver f81232 [ 51.904700] usbserial: USB Serial support registered for f81232 [ 51.904700] usbserial: USB Serial support registered for f81232 [ 51.907418] usbcore: registered new interface driver ftdi_sio [ 51.907418] usbcore: registered new interface driver ftdi_sio [ 51.910090] usbserial: USB Serial support registered for FTDI USB Serial Device [ 51.910090] usbserial: USB Serial support registered for FTDI USB Serial Device [ 51.913667] usbcore: registered new interface driver garmin_gps [ 51.913667] usbcore: registered new interface driver garmin_gps [ 51.916511] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 51.916511] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 51.919706] usbcore: registered new interface driver ipw [ 51.919706] usbcore: registered new interface driver ipw [ 51.922114] usbserial: USB Serial support registered for IPWireless converter [ 51.922114] usbserial: USB Serial support registered for IPWireless converter [ 51.925434] usbcore: registered new interface driver ir_usb [ 51.925434] usbcore: registered new interface driver ir_usb [ 51.927732] usbserial: USB Serial support registered for IR Dongle [ 51.927732] usbserial: USB Serial support registered for IR Dongle [ 51.929893] usbcore: registered new interface driver iuu_phoenix [ 51.929893] usbcore: registered new interface driver iuu_phoenix [ 51.932441] usbserial: USB Serial support registered for iuu_phoenix [ 51.932441] usbserial: USB Serial support registered for iuu_phoenix [ 51.935324] usbcore: registered new interface driver keyspan [ 51.935324] usbcore: registered new interface driver keyspan [ 51.937926] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 51.937926] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 51.941785] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 51.941785] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 51.945132] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 51.945132] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 51.948509] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 51.948509] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 51.951857] usbcore: registered new interface driver keyspan_pda [ 51.951857] usbcore: registered new interface driver keyspan_pda [ 51.954503] usbserial: USB Serial support registered for Keyspan PDA [ 51.954503] usbserial: USB Serial support registered for Keyspan PDA [ 51.957515] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) [ 51.957515] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) [ 51.960418] usbcore: registered new interface driver kl5kusb105 [ 51.960418] usbcore: registered new interface driver kl5kusb105 [ 51.962711] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect [ 51.962711] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect [ 51.966012] usbcore: registered new interface driver kobil_sct [ 51.966012] usbcore: registered new interface driver kobil_sct [ 51.968616] usbserial: USB Serial support registered for KOBIL USB smart card terminal [ 51.968616] usbserial: USB Serial support registered for KOBIL USB smart card terminal [ 51.971369] usbcore: registered new interface driver mct_u232 [ 51.971369] usbcore: registered new interface driver mct_u232 [ 51.973791] usbserial: USB Serial support registered for MCT U232 [ 51.973791] usbserial: USB Serial support registered for MCT U232 [ 51.976177] usbcore: registered new interface driver metro_usb [ 51.976177] usbcore: registered new interface driver metro_usb [ 51.978496] usbserial: USB Serial support registered for Metrologic USB to Serial [ 51.978496] usbserial: USB Serial support registered for Metrologic USB to Serial [ 51.981692] usbcore: registered new interface driver mos7720 [ 51.981692] usbcore: registered new interface driver mos7720 [ 51.984097] usbserial: USB Serial support registered for Moschip 2 port adapter [ 51.984097] usbserial: USB Serial support registered for Moschip 2 port adapter [ 51.987337] usbcore: registered new interface driver mxuport [ 51.987337] usbcore: registered new interface driver mxuport [ 51.998379] usbserial: USB Serial support registered for MOXA UPort [ 51.998379] usbserial: USB Serial support registered for MOXA UPort [ 52.000732] usbcore: registered new interface driver navman [ 52.000732] usbcore: registered new interface driver navman [ 52.003357] usbserial: USB Serial support registered for navman [ 52.003357] usbserial: USB Serial support registered for navman [ 52.006490] usbcore: registered new interface driver omninet [ 52.006490] usbcore: registered new interface driver omninet [ 52.009617] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 52.009617] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 52.013365] usbcore: registered new interface driver opticon [ 52.013365] usbcore: registered new interface driver opticon [ 52.025115] usbserial: USB Serial support registered for opticon [ 52.025115] usbserial: USB Serial support registered for opticon [ 52.030483] usbcore: registered new interface driver oti6858 [ 52.030483] usbcore: registered new interface driver oti6858 [ 52.033428] usbserial: USB Serial support registered for oti6858 [ 52.033428] usbserial: USB Serial support registered for oti6858 [ 52.036468] usbcore: registered new interface driver qcaux [ 52.036468] usbcore: registered new interface driver qcaux [ 52.039396] usbserial: USB Serial support registered for qcaux [ 52.039396] usbserial: USB Serial support registered for qcaux [ 52.045524] usbcore: registered new interface driver safe_serial [ 52.045524] usbcore: registered new interface driver safe_serial [ 52.048371] usbserial: USB Serial support registered for safe_serial [ 52.048371] usbserial: USB Serial support registered for safe_serial [ 52.051237] usbcore: registered new interface driver sierra [ 52.051237] usbcore: registered new interface driver sierra [ 52.054316] usbserial: USB Serial support registered for Sierra USB modem [ 52.054316] usbserial: USB Serial support registered for Sierra USB modem [ 52.056833] usbcore: registered new interface driver ssu100 [ 52.056833] usbcore: registered new interface driver ssu100 [ 52.058852] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 52.058852] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 52.075086] usbcore: registered new interface driver symbolserial [ 52.075086] usbcore: registered new interface driver symbolserial [ 52.077463] usbserial: USB Serial support registered for symbol [ 52.077463] usbserial: USB Serial support registered for symbol [ 52.079686] usbcore: registered new interface driver whiteheat [ 52.079686] usbcore: registered new interface driver whiteheat [ 52.082094] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 52.082094] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 52.085762] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 52.085762] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 52.088870] usbcore: registered new interface driver xsens_mt [ 52.088870] usbcore: registered new interface driver xsens_mt [ 52.091482] usbserial: USB Serial support registered for xsens_mt [ 52.091482] usbserial: USB Serial support registered for xsens_mt [ 52.094639] usbcore: registered new interface driver zte_ev [ 52.094639] usbcore: registered new interface driver zte_ev [ 52.097219] usbserial: USB Serial support registered for zte_ev [ 52.097219] usbserial: USB Serial support registered for zte_ev [ 52.100259] usbcore: registered new interface driver adutux [ 52.100259] usbcore: registered new interface driver adutux [ 52.102648] usbcore: registered new interface driver cypress_cy7c63 [ 52.102648] usbcore: registered new interface driver cypress_cy7c63 [ 52.105070] usbcore: registered new interface driver cytherm [ 52.105070] usbcore: registered new interface driver cytherm [ 52.107153] usbcore: registered new interface driver emi26 - firmware loader [ 52.107153] usbcore: registered new interface driver emi26 - firmware loader [ 52.109910] usbcore: registered new interface driver emi62 - firmware loader [ 52.109910] usbcore: registered new interface driver emi62 - firmware loader [ 52.112498] usbcore: registered new interface driver idmouse [ 52.112498] usbcore: registered new interface driver idmouse [ 52.121921] usbcore: registered new interface driver iowarrior [ 52.121921] usbcore: registered new interface driver iowarrior [ 52.124874] usbcore: registered new interface driver usblcd [ 52.124874] usbcore: registered new interface driver usblcd [ 52.127623] usbcore: registered new interface driver ldusb [ 52.127623] usbcore: registered new interface driver ldusb [ 52.130448] usbcore: registered new interface driver usbled [ 52.130448] usbcore: registered new interface driver usbled [ 52.133145] usbcore: registered new interface driver legousbtower [ 52.133145] usbcore: registered new interface driver legousbtower [ 52.153139] usbcore: registered new interface driver rio500 [ 52.153139] usbcore: registered new interface driver rio500 [ 52.155925] usbcore: registered new interface driver usbtest [ 52.155925] usbcore: registered new interface driver usbtest [ 52.158751] usbcore: registered new interface driver usb_ehset_test [ 52.158751] usbcore: registered new interface driver usb_ehset_test [ 52.161890] usbcore: registered new interface driver trancevibrator [ 52.161890] usbcore: registered new interface driver trancevibrator [ 52.177923] usbcore: registered new interface driver usbsevseg [ 52.177923] usbcore: registered new interface driver usbsevseg [ 52.180852] usbcore: registered new interface driver sisusb [ 52.180852] usbcore: registered new interface driver sisusb [ 52.183850] usbcore: registered new interface driver lvs [ 52.183850] usbcore: registered new interface driver lvs [ 52.187500] usbcore: registered new interface driver ueagle-atm [ 52.187500] usbcore: registered new interface driver ueagle-atm [ 52.190277] xusbatm: malformed module parameters [ 52.190277] xusbatm: malformed module parameters [ 52.204086] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 52.204086] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 52.207382] dummy_hcd dummy_hcd.0: Dummy host controller [ 52.207382] dummy_hcd dummy_hcd.0: Dummy host controller [ 52.211786] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 52.211786] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 52.217491] hub 1-0:1.0: USB hub found [ 52.217491] hub 1-0:1.0: USB hub found [ 52.219242] hub 1-0:1.0: 1 port detected [ 52.219242] hub 1-0:1.0: 1 port detected [ 52.226623] userial_init: registered 4 ttyGS* devices [ 52.226623] userial_init: registered 4 ttyGS* devices [ 52.228405] udc dummy_udc.0: registering UDC driver [g_cdc] [ 52.228405] udc dummy_udc.0: registering UDC driver [g_cdc] [ 52.230511] using random self ethernet address [ 52.230511] using random self ethernet address [ 52.232281] using random host ethernet address [ 52.232281] using random host ethernet address [ 52.234728] g_cdc gadget: adding config #1 'CDC Composite (ECM + ACM)'/ffffffff83ed3500 [ 52.234728] g_cdc gadget: adding config #1 'CDC Composite (ECM + ACM)'/ffffffff83ed3500 [ 52.238318] g_cdc gadget: adding 'cdc_ethernet'/ffff88000a155800 to config 'CDC Composite (ECM + ACM)'/ffffffff83ed3500 [ 52.238318] g_cdc gadget: adding 'cdc_ethernet'/ffff88000a155800 to config 'CDC Composite (ECM + ACM)'/ffffffff83ed3500 [ 52.243594] usb0: HOST MAC b2:dc:87:ac:41:95 [ 52.243594] usb0: HOST MAC b2:dc:87:ac:41:95 [ 52.245588] usb0: MAC ba:37:2d:f5:aa:33 [ 52.245588] usb0: MAC ba:37:2d:f5:aa:33 [ 52.247171] g_cdc gadget: CDC Ethernet: super speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int [ 52.247171] g_cdc gadget: CDC Ethernet: super speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int [ 52.251213] g_cdc gadget: adding 'acm'/ffff88000a155a00 to config 'CDC Composite (ECM + ACM)'/ffffffff83ed3500 [ 52.251213] g_cdc gadget: adding 'acm'/ffff88000a155a00 to config 'CDC Composite (ECM + ACM)'/ffffffff83ed3500 [ 52.255455] g_cdc gadget: acm ttyGS0: super speed IN/ep6in-bulk OUT/ep7out-bulk NOTIFY/ep10in-int [ 52.255455] g_cdc gadget: acm ttyGS0: super speed IN/ep6in-bulk OUT/ep7out-bulk NOTIFY/ep10in-int [ 52.259172] g_cdc gadget: cfg 1/ffffffff83ed3500 speeds: super high full [ 52.259172] g_cdc gadget: cfg 1/ffffffff83ed3500 speeds: super high full [ 52.262224] g_cdc gadget: interface 0 = cdc_ethernet/ffff88000a155800 [ 52.262224] g_cdc gadget: interface 0 = cdc_ethernet/ffff88000a155800 [ 52.265139] g_cdc gadget: interface 1 = cdc_ethernet/ffff88000a155800 [ 52.265139] g_cdc gadget: interface 1 = cdc_ethernet/ffff88000a155800 [ 52.267971] g_cdc gadget: interface 2 = acm/ffff88000a155a00 [ 52.267971] g_cdc gadget: interface 2 = acm/ffff88000a155a00 [ 52.270084] g_cdc gadget: interface 3 = acm/ffff88000a155a00 [ 52.270084] g_cdc gadget: interface 3 = acm/ffff88000a155a00 [ 52.272497] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008 [ 52.272497] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008 [ 52.275236] g_cdc gadget: g_cdc ready [ 52.275236] g_cdc gadget: g_cdc ready [ 52.276525] dummy_udc dummy_udc.0: binding gadget driver 'g_cdc' [ 52.276525] dummy_udc dummy_udc.0: binding gadget driver 'g_cdc' [ 52.278689] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 52.278689] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 52.281252] usbip_core: USB/IP Core v1.0.0 [ 52.281252] usbip_core: USB/IP Core v1.0.0 [ 52.283764] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller [ 52.283764] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller [ 52.286094] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2 [ 52.286094] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2 [ 52.293328] hub 2-0:1.0: USB hub found [ 52.293328] hub 2-0:1.0: USB hub found [ 52.295000] hub 2-0:1.0: 8 ports detected [ 52.295000] hub 2-0:1.0: 8 ports detected [ 52.299943] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0 [ 52.299943] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0 [ 52.317178] usbcore: registered new device driver usbip-host [ 52.317178] usbcore: registered new device driver usbip-host [ 52.319348] usbip_host: USB/IP Host Driver v1.0.0 [ 52.319348] usbip_host: USB/IP Host Driver v1.0.0 [ 52.321693] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 52.321693] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 52.336735] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 52.336735] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 52.346643] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 52.346643] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 52.358222] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 52.358222] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 52.504204] g_cdc gadget: resume [ 52.504204] g_cdc gadget: resume [ 52.505702] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 52.505702] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 52.546430] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 52.546430] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 52.552347] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 52.552347] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 52.555303] cm109: Keymap for Komunikate KIP1000 phone loaded [ 52.555303] cm109: Keymap for Komunikate KIP1000 phone loaded [ 52.557873] usbcore: registered new interface driver cm109 [ 52.557873] usbcore: registered new interface driver cm109 [ 52.560173] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 52.560173] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 52.563213] usbcore: registered new interface driver ims_pcu [ 52.563213] usbcore: registered new interface driver ims_pcu [ 52.565253] usbcore: registered new interface driver keyspan_remote [ 52.565253] usbcore: registered new interface driver keyspan_remote [ 52.565965] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 52.565965] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 52.584137] usbcore: registered new interface driver powermate [ 52.584137] usbcore: registered new interface driver powermate [ 52.587210] usbcore: registered new interface driver yealink [ 52.587210] usbcore: registered new interface driver yealink [ 52.589609] i2c /dev entries driver [ 52.589609] i2c /dev entries driver [ 52.606236] usbcore: registered new interface driver i2c-diolan-u2c [ 52.606236] usbcore: registered new interface driver i2c-diolan-u2c [ 52.608772] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF [ 52.608772] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF [ 52.612351] usbcore: registered new interface driver i2c-tiny-usb [ 52.612351] usbcore: registered new interface driver i2c-tiny-usb [ 52.615309] pps_ldisc: PPS line discipline registered [ 52.615309] pps_ldisc: PPS line discipline registered [ 52.617472] Driver for 1-wire Dallas network protocol. [ 52.617472] Driver for 1-wire Dallas network protocol. [ 52.633154] usbcore: registered new interface driver DS9490R [ 52.633154] usbcore: registered new interface driver DS9490R [ 52.635543] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 52.635543] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 52.638582] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 52.638582] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 52.644085] g_cdc gadget: resume [ 52.644085] g_cdc gadget: resume [ 52.645227] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 52.645227] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 52.660289] applesmc: supported laptop not found! [ 52.660289] applesmc: supported laptop not found! [ 52.662181] applesmc: driver init failed (ret=-19)! [ 52.662181] applesmc: driver init failed (ret=-19)! [ 52.682811] f71882fg: Not a Fintek device [ 52.682811] f71882fg: Not a Fintek device [ 52.684485] f71882fg: Not a Fintek device [ 52.684485] f71882fg: Not a Fintek device [ 52.690795] pc87360: PC8736x not detected, module not inserted [ 52.690795] pc87360: PC8736x not detected, module not inserted [ 52.694311] Bluetooth: Virtual HCI driver ver 1.5 [ 52.694311] Bluetooth: Virtual HCI driver ver 1.5 [ 52.723918] usbcore: registered new interface driver bcm203x [ 52.723918] usbcore: registered new interface driver bcm203x [ 52.725659] dummy_udc dummy_udc.0: set_address = 2 [ 52.725659] dummy_udc dummy_udc.0: set_address = 2 [ 52.739859] usbcore: registered new interface driver bpa10x [ 52.739859] usbcore: registered new interface driver bpa10x [ 52.752223] usbcore: registered new interface driver bfusb [ 52.752223] usbcore: registered new interface driver bfusb [ 52.754797] usbcore: registered new interface driver btusb [ 52.754797] usbcore: registered new interface driver btusb [ 52.758657] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 52.758657] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 52.767884] usbcore: registered new interface driver ath3k [ 52.767884] usbcore: registered new interface driver ath3k [ 52.770612] sdhci: Secure Digital Host Controller Interface driver [ 52.770612] sdhci: Secure Digital Host Controller Interface driver [ 52.773499] sdhci: Copyright(c) Pierre Ossman [ 52.773499] sdhci: Copyright(c) Pierre Ossman [ 52.776415] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 52.776415] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 52.790740] usb 1-1: Dual-Role OTG device on HNP port [ 52.790740] usb 1-1: Dual-Role OTG device on HNP port [ 52.791466] usbcore: registered new interface driver vub300 [ 52.791466] usbcore: registered new interface driver vub300 [ 52.791759] sdhci-pltfm: SDHCI platform and OF driver helper [ 52.791759] sdhci-pltfm: SDHCI platform and OF driver helper [ 52.793526] ledtrig-cpu: registered to indicate activity on CPUs [ 52.793526] ledtrig-cpu: registered to indicate activity on CPUs [ 52.794734] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 52.794734] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 52.799605] usbcore: registered new interface driver usbkbd [ 52.799605] usbcore: registered new interface driver usbkbd [ 52.799890] dell_wmi: No known WMI GUID found [ 52.799890] dell_wmi: No known WMI GUID found [ 52.799903] dell_wmi_aio: No known WMI GUID found [ 52.799903] dell_wmi_aio: No known WMI GUID found [ 52.800132] Initializing HPQ6001 module [ 52.800132] Initializing HPQ6001 module [ 52.801761] FUJ02B1: call_fext_func: FUNC interface is not present [ 52.801761] FUJ02B1: call_fext_func: FUNC interface is not present [ 52.801765] fujitsu_laptop: driver 0.6.0 successfully loaded [ 52.801765] fujitsu_laptop: driver 0.6.0 successfully loaded [ 52.801924] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI [ 52.801924] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI [ 52.802918] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 52.802918] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 52.802919] hv_vmbus: registering driver hv_balloon [ 52.802919] hv_vmbus: registering driver hv_balloon [ 52.806498] intel_rapl: driver does not support CPU family 15 model 6 [ 52.806498] intel_rapl: driver does not support CPU family 15 model 6 [ 52.806518] oprofile: using NMI interrupt. [ 52.806518] oprofile: using NMI interrupt. [ 52.806662] NET: Registered protocol family 26 [ 52.806662] NET: Registered protocol family 26 [ 52.806822] NET: Registered protocol family 17 [ 52.806822] NET: Registered protocol family 17 [ 52.820482] NET: Registered protocol family 15 [ 52.820482] NET: Registered protocol family 15 [ 52.822285] NET: Registered protocol family 5 [ 52.822285] NET: Registered protocol family 5 [ 52.822374] can: controller area network core (rev 20120528 abi 9) [ 52.822374] can: controller area network core (rev 20120528 abi 9) [ 52.822451] can: failed to create /proc/net/can . CONFIG_PROC_FS missing? [ 52.822451] can: failed to create /proc/net/can . CONFIG_PROC_FS missing? [ 52.822457] NET: Registered protocol family 29 [ 52.822457] NET: Registered protocol family 29 [ 52.822476] can: raw protocol (rev 20120528) [ 52.822476] can: raw protocol (rev 20120528) [ 52.822583] can: netlink gateway (rev 20130117) max_hops=1 [ 52.822583] can: netlink gateway (rev 20130117) max_hops=1 [ 52.824781] IrCOMM protocol (Dag Brattli) [ 52.824781] IrCOMM protocol (Dag Brattli) [ 52.842312] Bluetooth: RFCOMM socket layer initialized [ 52.842312] Bluetooth: RFCOMM socket layer initialized [ 52.842372] Bluetooth: RFCOMM ver 1.11 [ 52.842372] Bluetooth: RFCOMM ver 1.11 [ 52.842411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 52.842411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 52.842415] Bluetooth: BNEP filters: protocol multicast [ 52.842415] Bluetooth: BNEP filters: protocol multicast [ 52.842423] Bluetooth: BNEP socket layer initialized [ 52.842423] Bluetooth: BNEP socket layer initialized [ 52.842433] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 52.842433] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 52.842440] Bluetooth: HIDP socket layer initialized [ 52.842440] Bluetooth: HIDP socket layer initialized [ 52.842517] lec:lane_module_init: lec.c: initialized [ 52.842517] lec:lane_module_init: lec.c: initialized [ 52.842530] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 52.842530] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 52.844708] DECnet: Routing cache hash table of 256 buckets, 16Kbytes [ 52.844708] DECnet: Routing cache hash table of 256 buckets, 16Kbytes [ 52.844800] NET: Registered protocol family 12 [ 52.844800] NET: Registered protocol family 12 [ 52.852523] NET: Registered protocol family 36 [ 52.852523] NET: Registered protocol family 36 [ 52.854504] batman_adv: B.A.T.M.A.N. advanced 2014.4.0 (compatibility version 15) loaded [ 52.854504] batman_adv: B.A.T.M.A.N. advanced 2014.4.0 (compatibility version 15) loaded [ 52.854517] openvswitch: Open vSwitch switching datapath [ 52.854517] openvswitch: Open vSwitch switching datapath [ 52.854836] mpls_gso: MPLS GSO support [ 52.854836] mpls_gso: MPLS GSO support [ 52.860369] [ 52.860369] printing PIC contents [ 52.860369] [ 52.860369] printing PIC contents [ 52.860384] ... PIC IMR: ffff [ 52.860384] ... PIC IMR: ffff [ 52.860394] ... PIC IRR: 9013 [ 52.860394] ... PIC IRR: 9013 [ 52.860410] ... PIC ISR: 0000 [ 52.860410] ... PIC ISR: 0000 [ 52.860421] ... PIC ELCR: 0c00 [ 52.860421] ... PIC ELCR: 0c00 [ 52.860434] printing local APIC contents on CPU#0/0: [ 52.860434] printing local APIC contents on CPU#0/0: [ 52.860446] ... APIC ID: 00000000 (0) [ 52.860446] ... APIC ID: 00000000 (0) [ 52.860453] ... APIC VERSION: 01050014 [ 52.860453] ... APIC VERSION: 01050014 [ 52.860461] ... APIC TASKPRI: 00000000 (00) [ 52.860461] ... APIC TASKPRI: 00000000 (00) [ 52.860468] ... APIC PROCPRI: 00000000 [ 52.860468] ... APIC PROCPRI: 00000000 [ 52.860475] ... APIC LDR: 01000000 [ 52.860475] ... APIC LDR: 01000000 [ 52.860482] ... APIC DFR: ffffffff [ 52.860482] ... APIC DFR: ffffffff [ 52.860489] ... APIC SPIV: 000001ff [ 52.860489] ... APIC SPIV: 000001ff [ 52.860491] ... APIC ISR field: [ 52.860491] ... APIC ISR field: [ 52.860545] 0000000000000000000000000000000000000000000000000000000000000000 [ 52.860545] 0000000000000000000000000000000000000000000000000000000000000000 [ 52.860547] ... APIC TMR field: [ 52.860547] ... APIC TMR field: [ 52.860623] 000000000e200000000000000000000000000000000000000000000000000000 [ 52.860623] 000000000e200000000000000000000000000000000000000000000000000000 [ 52.860625] ... APIC IRR field: [ 52.860625] ... APIC IRR field: [ 52.860678] 0000000000000000000000000000000000000000000000000000000000000000 [ 52.860678] 0000000000000000000000000000000000000000000000000000000000000000 [ 52.860689] ... APIC ESR: 00000000 [ 52.860689] ... APIC ESR: 00000000 [ 52.860700] ... APIC ICR: 000008fd [ 52.860700] ... APIC ICR: 000008fd [ 52.860703] ... APIC ICR2: 02000000 [ 52.860703] ... APIC ICR2: 02000000 [ 52.860710] ... APIC LVTT: 000000ef [ 52.860710] ... APIC LVTT: 000000ef [ 52.860717] ... APIC LVTPC: 00010000 [ 52.860717] ... APIC LVTPC: 00010000 [ 52.860724] ... APIC LVT0: 00010700 [ 52.860724] ... APIC LVT0: 00010700 [ 52.860731] ... APIC LVT1: 00000400 [ 52.860731] ... APIC LVT1: 00000400 [ 52.860738] ... APIC LVTERR: 000000fe [ 52.860738] ... APIC LVTERR: 000000fe [ 52.860745] ... APIC TMICT: 0000b89b [ 52.860745] ... APIC TMICT: 0000b89b [ 52.860752] ... APIC TMCCT: 00003e96 [ 52.860752] ... APIC TMCCT: 00003e96 [ 52.860759] ... APIC TDCR: 00000003 [ 52.860759] ... APIC TDCR: 00000003 [ 52.860761] [ 52.860761] [ 52.860766] number of MP IRQ sources: 15. [ 52.860766] number of MP IRQ sources: 15. [ 52.860770] number of IO-APIC #0 registers: 24. [ 52.860770] number of IO-APIC #0 registers: 24. [ 52.860773] testing the IO APIC....................... [ 52.860773] testing the IO APIC....................... [ 52.860804] IO APIC #0...... [ 52.860804] IO APIC #0...... [ 52.860807] .... register #00: 00000000 [ 52.860807] .... register #00: 00000000 [ 52.860810] ....... : physical APIC id: 00 [ 52.860810] ....... : physical APIC id: 00 [ 52.860813] ....... : Delivery Type: 0 [ 52.860813] ....... : Delivery Type: 0 [ 52.860816] ....... : LTS : 0 [ 52.860816] ....... : LTS : 0 [ 52.860819] .... register #01: 00170011 [ 52.860819] .... register #01: 00170011 [ 52.860822] ....... : max redirection entries: 17 [ 52.860822] ....... : max redirection entries: 17 [ 52.860825] ....... : PRQ implemented: 0 [ 52.860825] ....... : PRQ implemented: 0 [ 52.860828] ....... : IO APIC version: 11 [ 52.860828] ....... : IO APIC version: 11 [ 52.860831] .... register #02: 00000000 [ 52.860831] .... register #02: 00000000 [ 52.860834] ....... : arbitration: 00 [ 52.860834] ....... : arbitration: 00 [ 52.860837] .... IRQ redirection table: [ 52.860837] .... IRQ redirection table: [ 52.860860] 1 0 0 0 0 0 0 00 [ 52.860860] 1 0 0 0 0 0 0 00 [ 52.860881] 0 0 0 0 0 1 1 31 [ 52.860881] 0 0 0 0 0 1 1 31 [ 52.860902] 0 0 0 0 0 1 1 30 [ 52.860902] 0 0 0 0 0 1 1 30 [ 52.860925] 0 0 0 0 0 1 1 33 [ 52.860925] 0 0 0 0 0 1 1 33 [ 52.860946] 1 0 0 0 0 1 1 34 [ 52.860946] 1 0 0 0 0 1 1 34 [ 52.860968] 1 1 0 0 0 1 1 35 [ 52.860968] 1 1 0 0 0 1 1 35 [ 52.860988] 0 0 0 0 0 1 1 36 [ 52.860988] 0 0 0 0 0 1 1 36 [ 52.862248] 0 0 0 0 0 1 1 37 [ 52.862248] 0 0 0 0 0 1 1 37 [ 52.862274] 0 0 0 0 0 1 1 38 [ 52.862274] 0 0 0 0 0 1 1 38 [ 52.862297] 1 1 0 0 0 1 1 39 [ 52.862297] 1 1 0 0 0 1 1 39 [ 52.862319] 1 1 0 0 0 1 1 3A [ 52.862319] 1 1 0 0 0 1 1 3A [ 52.862343] 1 1 0 0 0 1 1 3B [ 52.862343] 1 1 0 0 0 1 1 3B [ 52.862367] 0 0 0 0 0 1 1 3C [ 52.862367] 0 0 0 0 0 1 1 3C [ 52.862390] 0 0 0 0 0 1 1 3D [ 52.862390] 0 0 0 0 0 1 1 3D [ 52.862414] 0 0 0 0 0 1 1 3E [ 52.862414] 0 0 0 0 0 1 1 3E [ 52.862436] 0 0 0 0 0 1 1 3F [ 52.862436] 0 0 0 0 0 1 1 3F [ 52.862457] 1 0 0 0 0 0 0 00 [ 52.862457] 1 0 0 0 0 0 0 00 [ 52.862480] 1 0 0 0 0 0 0 00 [ 52.862480] 1 0 0 0 0 0 0 00 [ 52.862501] 1 0 0 0 0 0 0 00 [ 52.862501] 1 0 0 0 0 0 0 00 [ 52.862522] 1 0 0 0 0 0 0 00 [ 52.862522] 1 0 0 0 0 0 0 00 [ 52.862543] 1 0 0 0 0 0 0 00 [ 52.862543] 1 0 0 0 0 0 0 00 [ 52.862586] 1 0 0 0 0 0 0 00 [ 52.862586] 1 0 0 0 0 0 0 00 [ 52.862608] 1 0 0 0 0 0 0 00 [ 52.862608] 1 0 0 0 0 0 0 00 [ 52.862630] 1 0 0 0 0 0 0 00 [ 52.862630] 1 0 0 0 0 0 0 00 [ 52.862633] IRQ to pin mappings: [ 52.862633] IRQ to pin mappings: [ 52.862644] IRQ0 -> 0:2 [ 52.862644] IRQ0 -> 0:2 [ 52.862651] IRQ1 -> 0:1 [ 52.862651] IRQ1 -> 0:1 [ 52.862659] IRQ3 -> 0:3 [ 52.862659] IRQ3 -> 0:3 [ 52.862667] IRQ4 -> 0:4 [ 52.862667] IRQ4 -> 0:4 [ 52.862675] IRQ5 -> 0:5 [ 52.862675] IRQ5 -> 0:5 [ 52.862682] IRQ6 -> 0:6 [ 52.862682] IRQ6 -> 0:6 [ 52.862690] IRQ7 -> 0:7 [ 52.862690] IRQ7 -> 0:7 [ 52.862697] IRQ8 -> 0:8 [ 52.862697] IRQ8 -> 0:8 [ 52.862705] IRQ9 -> 0:9 [ 52.862705] IRQ9 -> 0:9 [ 52.862713] IRQ10 -> 0:10 [ 52.862713] IRQ10 -> 0:10 [ 52.862722] IRQ11 -> 0:11 [ 52.862722] IRQ11 -> 0:11 [ 52.862731] IRQ12 -> 0:12 [ 52.862731] IRQ12 -> 0:12 [ 52.862739] IRQ13 -> 0:13 [ 52.862739] IRQ13 -> 0:13 [ 52.862746] IRQ14 -> 0:14 [ 52.862746] IRQ14 -> 0:14 [ 52.862754] IRQ15 -> 0:15 [ 52.862754] IRQ15 -> 0:15 [ 52.862757] .................................... done. [ 52.862757] .................................... done. [ 52.864660] bootconsole [earlyser0] disabled [ 52.864660] bootconsole [earlyser0] disabled [ 53.218713] Running ring buffer tests... [ 53.230363] usb 1-1: device v0525 pa4aa is not supported [ 53.231428] g_cdc gadget: suspend [ 53.232376] usb usb1-port1: unable to enumerate USB device [ 54.291991] hrtimer: interrupt took 2983858 ns [ 63.256702] finished [ 63.257990] CPU 0: [ 63.258649] events: 88257 [ 63.259976] dropped bytes: 0 [ 63.260949] alloced bytes: 6787088 [ 63.262479] written bytes: 6656472 [ 63.263553] biggest event: 242 [ 63.264591] smallest event: 4 [ 63.302799] read events: 12726 [ 63.303858] lost events: 75531 [ 63.304877] total events: 88257 [ 63.305901] recorded len bytes: 974184 [ 63.306937] recorded size bytes: 955245 [ 63.307976] With dropped events, record len and size may not match [ 63.307976] alloced and written from above [ 63.310624] CPU 1: [ 63.311272] events: 52679 [ 63.312344] dropped bytes: 0 [ 63.313318] alloced bytes: 4112348 [ 63.314380] written bytes: 4034068 [ 63.315447] biggest event: 203 [ 63.316465] smallest event: 4 [ 63.352936] read events: 12405 [ 63.353968] lost events: 40274 [ 63.354997] total events: 52679 [ 63.356002] recorded len bytes: 975000 [ 63.357245] recorded size bytes: 956525 [ 63.358296] With dropped events, record len and size may not match [ 63.358296] alloced and written from above [ 63.360707] Ring buffer PASSED! [ 63.366898] RIO: rio_register_scan for mport_id=-1 [ 63.383953] register_blkdev: cannot get major 3 for hd [ 63.385739] console [netcon0] enabled [ 63.386718] netconsole: network logging started [ 63.387946] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 63.389544] EDD information not available. [ 63.404769] debug: unmapping init [mem 0xffffffff84905000-0xffffffff84bb3fff] [ 63.409279] Write protecting the kernel read-only data: 40960k [ 63.421670] debug: unmapping init [mem 0xffff880002779000-0xffff8800027fffff] [ 63.423901] debug: unmapping init [mem 0xffff8800037f9000-0xffff8800037fffff] [ 63.482962] random: init urandom read with 49 bits of entropy available /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory [ 72.261776] rcu-torture: rtc: ffffffff8599d240 ver: 1 tfle: 0 rta: 1 rtaf: 0 rtf: 0 rtmbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 1 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=1000) barrier: 0/0:0 [ 72.261776] rcu-torture: Reader Pipe: 2 0 0 0 0 0 0 0 0 0 0 [ 72.261776] rcu-torture: Reader Batch: 2 0 0 0 0 0 0 0 0 0 0 [ 72.261776] rcu-torture: Free-Block Circulation: 0 0 0 0 0 0 0 0 0 0 0
mount: proc has wrong device number or fs type proc not supported /etc/rc6.d/S40umountfs: line 20: /proc/mounts: No such file or directory
cat: /proc/1/maps: No such file or directory
cat: /proc/1/maps: No such file or directory
cat: /proc/1/maps: No such file or directory
cat: /proc/1/maps: No such file or directory
cat: /proc/1/maps: No such file or directory
cat: /proc/1/maps: No such file or directory
umount: /var/run: not mounted
umount: /var/lock: not mounted
umount: /dev/shm: not mounted
mount: / is busy
* Will now restart
[ 130.625037] Unregister pv shared memory for cpu 1 [ 130.632993] Unregister pv shared memory for cpu 0 [ 130.634409] rcu-torture: Unscheduled system shutdown detected [ 130.636175] torture thread rcu_torture_writer parking due to system shutdown [ 130.637819] torture thread rcu_torture_fakewriter parking due to system shutdown [ 130.639599] torture thread rcu_torture_reader parking due to system shutdown [ 130.640955] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 130.642393] torture thread rcu_torture_fakewriter parking due to system shutdown
BUG: kernel boot crashed
Elapsed time: 185
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3/.vmlinuz-598d570a05cd31500fb15a843a92f68ddb1b3618-20141004115902-9-lkp-nex04 branch=linux-devel/devel-hourly-2014100409 BOOT_IMAGE=/kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-lkp-nex04-179 -serial file:/dev/shm/kboot/serial-quantal-lkp-nex04-179 -daemonize -display none -monitor null
HEAD is now at cd94c01... 0day head guard for 'devel-hourly-2014100409'
git checkout fe82dcec644244676d55a1384c958d5f67979adb
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:fe82dcec644244676d55a1384c958d5f67979adb:bisect-linux-3
2014-10-04 10:19:14 fe82dcec644244676d55a1384c958d5f67979adb reuse /kernel/x86_64-randconfig-hsb0-10041007/fe82dcec644244676d55a1384c958d5f67979adb/vmlinuz-3.17.0-rc7
2014-10-04 10:19:14 detecting boot state ... 44 70 SUCCESS
bisect: good commit fe82dcec644244676d55a1384c958d5f67979adb
git bisect start cd94c0185489f0cddcbfa80e86258bb4609b6e1d fe82dcec644244676d55a1384c958d5f67979adb --
/c/kernel-tests/linear-bisect: ["-b", "cd94c0185489f0cddcbfa80e86258bb4609b6e1d", "-g", "fe82dcec644244676d55a1384c958d5f67979adb", "/c/kernel-tests/bisect-test-boot-failure.sh", "/c/boot-bisect/linux-3/obj-bisect"]
Bisecting: 3833 revisions left to test after this (roughly 12 steps)
[a3f8f887e2a36003026b5d3effdd418d507cf7c8] Merge 'spi/for-linus' into devel-hourly-2014100409
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:a3f8f887e2a36003026b5d3effdd418d507cf7c8:bisect-linux-3
2014-10-04 10:21:46 a3f8f887e2a36003026b5d3effdd418d507cf7c8 compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-a3f8f887e2a36003026b5d3effdd418d507cf7c8 Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/a3f8f887e2a36003026b5d3effdd418d507cf7c8
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-a3f8f887e2a36003026b5d3effdd418d507cf7c8 [1;35m2014-10-04 11:12:46 No build served file /kbuild-tests/build-served/x86_64-randconfig-hsb0-10041007-a3f8f887e2a36003026b5d3effdd418d507cf7c8[0m Retry build ..
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-a3f8f887e2a36003026b5d3effdd418d507cf7c8
kernel: /kernel/x86_64-randconfig-hsb0-10041007/a3f8f887e2a36003026b5d3effdd418d507cf7c8/vmlinuz-3.17.0-rc7-02880-ga3f8f88
2014-10-04 11:17:46 detecting boot state .. 40 70 SUCCESS
Bisecting: 953 revisions left to test after this (roughly 10 steps)
[2e6b2ee6893da99e9a156087aee97f90b0c8429c] Merge 'trace/for-next' into devel-hourly-2014100409
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:2e6b2ee6893da99e9a156087aee97f90b0c8429c:bisect-linux-3
2014-10-04 11:19:47 2e6b2ee6893da99e9a156087aee97f90b0c8429c compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-2e6b2ee6893da99e9a156087aee97f90b0c8429c Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/2e6b2ee6893da99e9a156087aee97f90b0c8429c
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-2e6b2ee6893da99e9a156087aee97f90b0c8429c
kernel: /kernel/x86_64-randconfig-hsb0-10041007/2e6b2ee6893da99e9a156087aee97f90b0c8429c/vmlinuz-3.17.0-rc7-03298-g2e6b2ee
2014-10-04 11:22:47 detecting boot state .... 2 12 70 SUCCESS
Bisecting: 535 revisions left to test after this (roughly 10 steps)
[7ea38a3061ab82dcfb705c3f36f55ddd8c351c83] Merge 'usb/usb-next' into devel-hourly-2014100409
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:7ea38a3061ab82dcfb705c3f36f55ddd8c351c83:bisect-linux-3
2014-10-04 11:26:18 7ea38a3061ab82dcfb705c3f36f55ddd8c351c83 compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-7ea38a3061ab82dcfb705c3f36f55ddd8c351c83 Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/7ea38a3061ab82dcfb705c3f36f55ddd8c351c83
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-7ea38a3061ab82dcfb705c3f36f55ddd8c351c83
kernel: /kernel/x86_64-randconfig-hsb0-10041007/7ea38a3061ab82dcfb705c3f36f55ddd8c351c83/vmlinuz-3.17.0-rc7-03791-g7ea38a3
2014-10-04 11:28:18 detecting boot state .... 8. 70 SUCCESS
Bisecting: 42 revisions left to test after this (roughly 6 steps)
[6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8] Merge 'driver-core/driver-core-next' into devel-hourly-2014100409
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8:bisect-linux-3
2014-10-04 11:31:48 6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8 compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8 Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8 [1;35m2014-10-04 11:33:48 No build served file /kbuild-tests/build-served/x86_64-randconfig-hsb0-10041007-6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8[0m Retry build ..
kernel: /kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/vmlinuz-3.17.0-rc7-03812-g6d3ac51
2014-10-04 11:34:48 detecting boot state . TEST FAILURE [ 0.170000] kvm-stealtime: cpu 1, msr 1250da40 [ 0.178861] gcov: version magic: 0x3430392a [ 0.178861] gcov: version magic: 0x3430392a [ 0.198057] double fault: ffff [#1] [ 0.198057] double fault: ffff [#1] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.199000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-03812-g6d3ac51 #1 [ 0.199000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-03812-g6d3ac51 #1 [ 0.199000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.199000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.199000] RIP: 0010:[<ffffffff811718e4>] [ 0.199000] RIP: 0010:[<ffffffff811718e4>] [<ffffffff811718e4>] trace_hardirqs_off_caller+0x15/0x10c [<ffffffff811718e4>] trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] RSP: 0000:ffff880012500000 EFLAGS: 00010006 [ 0.199000] RSP: 0000:ffff880012500000 EFLAGS: 00010006 [ 0.199000] RAX: 0000000082770b30 RBX: 0000000000000001 RCX: ffffffff82770b30 [ 0.199000] RAX: 0000000082770b30 RBX: 0000000000000001 RCX: ffffffff82770b30 [ 0.199000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82771e66 [ 0.199000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82771e66 [ 0.199000] RBP: ffff880012500010 R08: 000000000000004a R09: ffffffff82838480 [ 0.199000] RBP: ffff880012500010 R08: 000000000000004a R09: ffffffff82838480 [ 0.199000] R10: ffffffff82839b00 R11: 0000000000000035 R12: ffff88001235bfc0 [ 0.199000] R10: ffffffff82839b00 R11: 0000000000000035 R12: ffff88001235bfc0 [ 0.199000] R13: ffff88001235bfc0 R14: 0000000000000000 R15: 0000000000000000 [ 0.199000] R13: ffff88001235bfc0 R14: 0000000000000000 R15: 0000000000000000 [ 0.199000] FS: 0000000000000000(0000) GS:ffff880012500000(0000) knlGS:0000000000000000 [ 0.199000] FS: 0000000000000000(0000) GS:ffff880012500000(0000) knlGS:0000000000000000 [ 0.199000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.199000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.199000] CR2: ffff8800124ffff8 CR3: 000000000380b000 CR4: 00000000000006a0 [ 0.199000] CR2: ffff8800124ffff8 CR3: 000000000380b000 CR4: 00000000000006a0 [ 0.199000] Stack: [ 0.199000] Stack: [ 0.199000] 0000000000000001 [ 0.199000] 0000000000000001 ffff88001235bfc0 ffff88001235bfc0 ffff880012500130 ffff880012500130 ffffffff8183492a ffffffff8183492a
[ 0.199000] 0000000000000035 [ 0.199000] 0000000000000035 ffffffff82839b00 ffffffff82839b00 ffffffff82838480 ffffffff82838480 000000000000004a 000000000000004a
[ 0.199000] 0000000082770b30 [ 0.199000] 0000000082770b30 ffffffff82770b30 ffffffff82770b30 0000000000000000 0000000000000000 0000000000000001 0000000000000001
[ 0.199000] Call Trace: [ 0.199000] Call Trace: [ 0.199000] <IRQ> [ 0.199000] <IRQ>
[ 0.199000] [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30 [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff811718e4>] ? trace_hardirqs_off_caller+0x15/0x10c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff8183492a>] trace_hardirqs_off_thunk+0x3a/0x3c [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82770b30>] ? irq_return+0xc/0xc [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771e66>] ? error_sti+0x5/0x6 [ 0.199000] [<ffffffff82771bdf>] ? async_page_fault+0xf/0x30
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-192:20141004113448:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-56:20141004113448:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-112:20141004113500:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-117:20141004113458:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-147:20141004113453:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-156:20141004113452:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-157:20141004113457:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-163:20141004113454:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-170:20141004113459:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-22:20141004113457:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-2:20141004113458:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-31:20141004113458:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-38:20141004113453:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-64:20141004113453:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-80:20141004113459:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-94:20141004113459:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-101:20141004113500:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-146:20141004113501:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-191:20141004113501:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-104:20141004113505:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-116:20141004113506:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-68:20141004113504:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-76:20141004113504:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/6d3ac51e9688b5cc2d4a63ba5f2e9b057db75ac8/dmesg-quantal-lkp-nex04-95:20141004113506:x86_64-randconfig-hsb0-10041007::
0:24:24 all_good:bad:all_bad boots
Bisecting: 21 revisions left to test after this (roughly 5 steps)
[a33db30bb2f4d53f325e1c465f594894f559843c] Merge 'ak/x86/fsgs-2' into devel-hourly-2014100409
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:a33db30bb2f4d53f325e1c465f594894f559843c:bisect-linux-3
2014-10-04 11:35:43 a33db30bb2f4d53f325e1c465f594894f559843c compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-a33db30bb2f4d53f325e1c465f594894f559843c Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-a33db30bb2f4d53f325e1c465f594894f559843c [1;35m2014-10-04 11:37:44 No build served file /kbuild-tests/build-served/x86_64-randconfig-hsb0-10041007-a33db30bb2f4d53f325e1c465f594894f559843c[0m Retry build ..
kernel: /kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/vmlinuz-3.17.0-rc7-03799-ga33db30
2014-10-04 11:39:05 detecting boot state . TEST FAILURE [ 0.193264] regulator-dummy: no parameters [ 0.196401] NET: Registered protocol family 16 [ 0.196401] NET: Registered protocol family 16 [ 0.209050] double fault: ffff [#1] [ 0.209050] double fault: ffff [#1] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.210000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-03799-ga33db30 #1 [ 0.210000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-03799-ga33db30 #1 [ 0.210000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.210000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.210000] RIP: 0010:[<ffffffff81834925>] [ 0.210000] RIP: 0010:[<ffffffff81834925>] [<ffffffff81834925>] trace_hardirqs_off_thunk+0x35/0x3c [<ffffffff81834925>] trace_hardirqs_off_thunk+0x35/0x3c [ 0.210000] RSP: 0000:ffff880012500000 EFLAGS: 00010086 [ 0.210000] RSP: 0000:ffff880012500000 EFLAGS: 00010086 [ 0.210000] RAX: 0000000082770a70 RBX: 0000000000000001 RCX: ffffffff82770a70 [ 0.210000] RAX: 0000000082770a70 RBX: 0000000000000001 RCX: ffffffff82770a70 [ 0.210000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82771da6 [ 0.210000] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82771da6 [ 0.210000] RBP: ffff880012500110 R08: 0000000000000000 R09: 0000000000000001 [ 0.210000] RBP: ffff880012500110 R08: 0000000000000000 R09: 0000000000000001 [ 0.210000] R10: ffff880012503e98 R11: ffffffff838c7ff0 R12: 0000000000013ec0 [ 0.210000] R10: ffff880012503e98 R11: ffffffff838c7ff0 R12: 0000000000013ec0 [ 0.210000] R13: 0000000000013ec0 R14: 0000000000000000 R15: 0000000000000000 [ 0.210000] R13: 0000000000013ec0 R14: 0000000000000000 R15: 0000000000000000 [ 0.210000] BUG: unable to handle kernel [ 0.210000] BUG: unable to handle kernel paging requestpaging request at ffffffff84bdb140 at ffffffff84bdb140 [ 0.210000] IP: [ 0.210000] IP: [<ffffffff81023eb0>] oops_begin+0x1/0x256 [<ffffffff81023eb0>] oops_begin+0x1/0x256 [ 0.210000] PGD 380e067 [ 0.210000] PGD 380e067 PUD 380f063 PUD 380f063 PMD 12121063 PMD 12121063 PTE 6bPTE 6b
[ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Oops: 0003 [#889] [ 0.210000] Oops: 0003 [#889] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.210000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff8800121ad618 [ 0.210000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff8800121ad618 [ 0.210000] BUG: unable to handle kernel [ 0.210000] BUG: unable to handle kernel paging requestpaging request at ffffffff84bd63c0 at ffffffff84bd63c0 [ 0.210000] IP: [ 0.210000] IP: [<ffffffff8101aa75>] __show_regs+0x31/0x3c0 [<ffffffff8101aa75>] __show_regs+0x31/0x3c0 [ 0.210000] PGD 380e067 [ 0.210000] PGD 380e067 PUD 380f063 PUD 380f063 PMD 12121063 PMD 12121063 PTE ffffffff81072c5dPTE ffffffff81072c5d
[ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Oops: 000b [#890] [ 0.210000] Oops: 000b [#890] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.210000] BUG: unable to handle kernel [ 0.210000] BUG: unable to handle kernel paging requestpaging request at ffffffff84bdb140 at ffffffff84bdb140 [ 0.210000] IP: [ 0.210000] IP: [<ffffffff81023eb0>] oops_begin+0x1/0x256 [<ffffffff81023eb0>] oops_begin+0x1/0x256 [ 0.210000] PGD 380e067 [ 0.210000] PGD 380e067 PUD 380f063 PUD 380f063 PMD 12121063 PMD 12121063 PTE 1PTE 1
[ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Oops: 0003 [#891] [ 0.210000] Oops: 0003 [#891] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.210000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff8800121ad618 [ 0.210000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff8800121ad618 [ 0.210000] BUG: unable to handle kernel [ 0.210000] BUG: unable to handle kernel paging requestpaging request at ffffffff84bd63c0 at ffffffff84bd63c0 [ 0.210000] IP: [ 0.210000] IP: [<ffffffff8101aa75>] __show_regs+0x31/0x3c0 [<ffffffff8101aa75>] __show_regs+0x31/0x3c0 [ 0.210000] PGD 380e067 [ 0.210000] PGD 380e067 PUD 380f063 PUD 380f063 PMD 12121063 PMD 12121063 PTE 0PTE 0
[ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Thread overran stack, or stack corrupted [ 0.210000] Oops: 000b [#892] [ 0.210000] Oops: 000b [#892] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
Elapsed time: 30 /kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-65:20141004113914:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-10:20141004113921:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-120:20141004113920:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-12:20141004113925:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-142:20141004113918:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-148:20141004113928:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-149:20141004113919:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-153:20141004113920:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/a33db30bb2f4d53f325e1c465f594894f559843c/dmesg-quantal-lkp-nex04-182:20141004113925:x86_64-randconfig-hsb0-10041007::
0:9:1 all_good:bad:all_bad boots
linear-bisect: bad branch may be ak/x86/fsgs-2
linear-bisect: handle over to git bisect
linear-bisect: git bisect start a33db30bb2f4d53f325e1c465f594894f559843c 7ea38a3061ab82dcfb705c3f36f55ddd8c351c83 --
Previous HEAD position was a33db30... Merge 'ak/x86/fsgs-2' into devel-hourly-2014100409
HEAD is now at b4d3318... Merge remote-tracking branch 'crypto/master'
Bisecting: 3 revisions left to test after this (roughly 2 steps)
[b8a868e9ea876a1b40020397305533c095921d7a] x86: Add support for rd/wr fs/gs base
linear-bisect: git bisect run /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:b8a868e9ea876a1b40020397305533c095921d7a:bisect-linux-3
2014-10-04 11:42:59 b8a868e9ea876a1b40020397305533c095921d7a compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-b8a868e9ea876a1b40020397305533c095921d7a Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-b8a868e9ea876a1b40020397305533c095921d7a
kernel: /kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/vmlinuz-3.17.0-rc7-00004-gb8a868e
2014-10-04 11:45:59 detecting boot state . TEST FAILURE [ 0.170000] kvm-stealtime: cpu 1, msr 1250da40 [ 0.177584] gcov: version magic: 0x3430392a [ 0.177584] gcov: version magic: 0x3430392a [ 0.201055] double fault: ffff [#1] [ 0.201055] double fault: ffff [#1] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.202000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.202000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.202000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.202000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.202000] RIP: 0010:[<ffffffff818273c9>] [ 0.202000] RIP: 0010:[<ffffffff818273c9>] [<ffffffff818273c9>] trace_hardirqs_off_thunk+0x9/0x3c [<ffffffff818273c9>] trace_hardirqs_off_thunk+0x9/0x3c [ 0.202000] RSP: 0000:ffff8800124fffc0 EFLAGS: 00010086 [ 0.202000] RSP: 0000:ffff8800124fffc0 EFLAGS: 00010086 [ 0.202000] RAX: 0000000082767ff0 RBX: 0000000000000001 RCX: ffffffff82767ff0 [ 0.202000] RAX: 0000000082767ff0 RBX: 0000000000000001 RCX: ffffffff82767ff0 [ 0.202000] RDX: 000000000000004e RSI: ffffffff82839a80 RDI: ffffffff82769326 [ 0.202000] RDX: 000000000000004e RSI: ffffffff82839a80 RDI: ffffffff82769326 [ 0.202000] RBP: ffff8800125000d0 R08: 000000000000004e R09: ffffffff82838400 [ 0.202000] RBP: ffff8800125000d0 R08: 000000000000004e R09: ffffffff82838400 [ 0.202000] R10: ffffffff82839a80 R11: 0000000000000038 R12: ffff8800121ad500 [ 0.202000] R10: ffffffff82839a80 R11: 0000000000000038 R12: ffff8800121ad500 [ 0.202000] R13: ffff880012513ec0 R14: 0000000000000000 R15: 0000000000000000 [ 0.202000] R13: ffff880012513ec0 R14: 0000000000000000 R15: 0000000000000000 [ 0.202000] FS: 0000000000000000(0000) GS:ffff880012500000(0000) knlGS:0000000000000000 [ 0.202000] FS: 0000000000000000(0000) GS:ffff880012500000(0000) knlGS:0000000000000000 [ 0.202000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.202000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.202000] CR2: ffff8800124fffb8 CR3: 000000000380b000 CR4: 00000000000006a0 [ 0.202000] CR2: ffff8800124fffb8 CR3: 000000000380b000 CR4: 00000000000006a0 [ 0.202000] Stack: [ 0.202000] Stack: [ 0.202000] BUG: unable to handle kernel [ 0.202000] BUG: unable to handle kernel paging requestpaging request at ffff8800124fffc0 at ffff8800124fffc0 [ 0.202000] IP: [ 0.202000] IP: [<ffffffff81021196>] show_stack_log_lvl+0x2a3/0x319 [<ffffffff81021196>] show_stack_log_lvl+0x2a3/0x319 [ 0.202000] PGD 6540067 [ 0.202000] PGD 6540067 PUD 6541067 PUD 6541067 PMD 127ef067 PMD 127ef067 PTE 80000000124ff060PTE 80000000124ff060
[ 0.202000] Oops: 0000 [#2] [ 0.202000] Oops: 0000 [#2] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.202000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.202000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-00004-gb8a868e #1 [ 0.202000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.202000] task: ffff8800121ad500 ti: ffff88001234c000 task.ti: ffff88001234c000 [ 0.202000] RIP: 0010:[<ffffffff81021196>] [ 0.202000] RIP: 0010:[<ffffffff81021196>] [<ffffffff81021196>] show_stack_log_lvl+0x2a3/0x319 [<ffffffff81021196>] show_stack_log_lvl+0x2a3/0x319 [ 0.202000] RSP: 0000:ffff880012507e18 EFLAGS: 00010046 [ 0.202000] RSP: 0000:ffff880012507e18 EFLAGS: 00010046 [ 0.202000] RAX: 0000000000000002 RBX: 0000000000000000 RCX: 000000000000c798 [ 0.202000] RAX: 0000000000000002 RBX: 0000000000000000 RCX: 000000000000c798 [ 0.202000] RDX: 000000000000c700 RSI: 0000000000000000 RDI: ffffffff8410f900 [ 0.202000] RDX: 000000000000c700 RSI: 0000000000000000 RDI: ffffffff8410f900 [ 0.202000] RBP: ffff880012507e68 R08: ffffffff83623e73 R09: 0000000000000000 [ 0.202000] RBP: ffff880012507e68 R08: ffffffff83623e73 R09: 0000000000000000 [ 0.202000] R10: 0000000000000001 R11: 0000000000004fba R12: ffff880012503fc0 [ 0.202000] R10: 0000000000000001 R11: 0000000000004fba R12: ffff880012503fc0 [ 0.202000] R13: 0000000000000000 R14: ffff8800124fffc0 R15: 0000000000000000 [ 0.202000] R13: 0000000000000000 R14: ffff8800124fffc0 R15: 0000000000000000 [ 0.202000] FS: 0000000000000000(0000) GS:ffff880012500000(0000) knlGS:0000000000000000 [ 0.202000] FS: 0000000000000000(0000) GS:ffff880012500000(0000) knlGS:0000000000000000 [ 0.202000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.202000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.202000] CR2: ffff8800124fffc0 CR3: 000000000380b000 CR4: 00000000000006a0 [ 0.202000] CR2: ffff8800124fffc0 CR3: 000000000380b000 CR4: 00000000000006a0 [ 0.202000] Stack: [ 0.202000] Stack: [ 0.202000] ffffffff83623e73 [ 0.202000] ffffffff83623e73 0000000000000000 0000000000000000 ffff880012507f58 ffff880012507f58 ffff8800124fffc0 ffff8800124fffc0
[ 0.202000] ffff8800124fffc0 [ 0.202000] ffff8800124fffc0 ffff8800124fffc0 ffff8800124fffc0 000000000000002b 000000000000002b ffff880012507f58 ffff880012507f58
[ 0.202000] 0000000000000040 [ 0.202000] 0000000000000040 0000000000000000 0000000000000000 ffff880012507ec8 ffff880012507ec8 ffffffff810212bf ffffffff810212bf
[ 0.202000] Call Trace: [ 0.202000] Call Trace: [ 0.202000] <#DF> [ 0.202000] <#DF>
[ 0.202000] [ 0.202000] [<ffffffff810212bf>] show_regs+0xb3/0x30f [<ffffffff810212bf>] show_regs+0xb3/0x30f [ 0.202000] [<ffffffff811350e9>] ? atomic_notifier_call_chain+0x16/0x1f [ 0.202000] [<ffffffff811350e9>] ? atomic_notifier_call_chain+0x16/0x1f [ 0.202000] [<ffffffff8102337e>] __die+0xf9/0x14d [ 0.202000] [<ffffffff8102337e>] __die+0xf9/0x14d [ 0.202000] [<ffffffff81023447>] die+0x75/0xc0 [ 0.202000] [<ffffffff81023447>] die+0x75/0xc0 [ 0.202000] [<ffffffff8101daea>] do_double_fault+0x6d/0x76 [ 0.202000] [<ffffffff8101daea>] do_double_fault+0x6d/0x76 [ 0.202000] [<ffffffff82768b40>] double_fault+0x30/0x40 [ 0.202000] [<ffffffff82768b40>] double_fault+0x30/0x40 [ 0.202000] [<ffffffff82767ff0>] ? irq_return+0xc/0xc [ 0.202000] [<ffffffff82767ff0>] ? irq_return+0xc/0xc [ 0.202000] [<ffffffff82769326>] ? error_sti+0x5/0x6 [ 0.202000] [<ffffffff82769326>] ? error_sti+0x5/0x6 [ 0.202000] [<ffffffff818273c9>] ? trace_hardirqs_off_thunk+0x9/0x3c [ 0.202000] [<ffffffff818273c9>] ? trace_hardirqs_off_thunk+0x9/0x3c [ 0.202000] <<EOE>> [ 0.202000] <<EOE>>
[ 0.202000] <UNK> [ 0.202000] <UNK> Code: Code: 83 83 c0 c0 02 02 48 48 ff ff 04 04 c5 c5 58 58 5c 5c 17 17 84 84 85 85 f6 f6 74 74 1c 1c 48 48 c7 c7 c7 c7 ad ad ca ca 79 79 83 83 31 31 c0 c0 48 48 ff ff 05 05 de de 71 71 bb bb 03 03 e8 e8 06 06 5b 5b 71 71 01 01 48 48 ff ff 05 05 da da 71 71 bb bb 03 03 <49> <49> 8b 8b 36 36 4d 4d 8d 8d 7e 7e 08 08 48 48 c7 c7 c7 c7 6b 6b 3e 3e 62 62 83 83 31 31 c0 c0 41 41 ff ff c5 c5 4d 4d 89 89
[ 0.202000] RIP [ 0.202000] RIP [<ffffffff81021196>] show_stack_log_lvl+0x2a3/0x319 [<ffffffff81021196>] show_stack_log_lvl+0x2a3/0x319 [ 0.202000] RSP <ffff880012507e18> [ 0.202000] RSP <ffff880012507e18> [ 0.202000] CR2: ffff8800124fffc0 [ 0.202000] CR2: ffff8800124fffc0 [ 0.202000] ---[ end trace e4346433deb61cf3 ]--- [ 0.202000] ---[ end trace e4346433deb61cf3 ]---
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-177:20141004114546:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-113:20141004114549:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-100:20141004114550:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-127:20141004114556:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-141:20141004114557:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-14:20141004114555:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-176:20141004114550:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-188:20141004114558:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-41:20141004114556:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-42:20141004114552:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-53:20141004114553:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-75:20141004114550:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-91:20141004114557:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-96:20141004114557:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-98:20141004114555:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-104:20141004114559:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-119:20141004114558:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-138:20141004114559:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-168:20141004114559:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-184:20141004114602:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-187:20141004114558:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-76:20141004114558:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/b8a868e9ea876a1b40020397305533c095921d7a/dmesg-quantal-lkp-nex04-124:20141004114603:x86_64-randconfig-hsb0-10041007::
0:23:23 all_good:bad:all_bad boots
Bisecting: 1 revision left to test after this (roughly 1 step)
[a0b0be64599f50dc2c9fa85734026701221f186a] x86: Naturally align the debug IST stack
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:a0b0be64599f50dc2c9fa85734026701221f186a:bisect-linux-3
2014-10-04 11:46:30 a0b0be64599f50dc2c9fa85734026701221f186a compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-a0b0be64599f50dc2c9fa85734026701221f186a Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/a0b0be64599f50dc2c9fa85734026701221f186a
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-a0b0be64599f50dc2c9fa85734026701221f186a [1;35m2014-10-04 11:48:31 No build served file /kbuild-tests/build-served/x86_64-randconfig-hsb0-10041007-a0b0be64599f50dc2c9fa85734026701221f186a[0m Retry build ..
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-a0b0be64599f50dc2c9fa85734026701221f186a
kernel: /kernel/x86_64-randconfig-hsb0-10041007/a0b0be64599f50dc2c9fa85734026701221f186a/vmlinuz-3.17.0-rc7-00002-ga0b0be6
2014-10-04 11:50:31 detecting boot state .. 3 6 67 70 SUCCESS
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[598d570a05cd31500fb15a843a92f68ddb1b3618] x86: Add intrinsics/macros for new rd/wr fs/gs base instructions
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux-3/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3
2014-10-04 11:53:31 598d570a05cd31500fb15a843a92f68ddb1b3618 compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-598d570a05cd31500fb15a843a92f68ddb1b3618 Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-598d570a05cd31500fb15a843a92f68ddb1b3618 [1;35m2014-10-04 11:55:31 No build served file /kbuild-tests/build-served/x86_64-randconfig-hsb0-10041007-598d570a05cd31500fb15a843a92f68ddb1b3618[0m Retry build ..
kernel: /kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a
2014-10-04 11:56:31 detecting boot state ... 48 70 SUCCESS
b8a868e9ea876a1b40020397305533c095921d7a is the first bad commit commit b8a868e9ea876a1b40020397305533c095921d7a
Author: Andi Kleen <[email protected]> Date: Wed Apr 23 13:26:20 2014 -0700
x86: Add support for rd/wr fs/gs base
IvyBridge added new instructions to directly write the fs and gs 64bit base registers. Previously this had to be done with a system call to write to MSRs. The main use case is fast user space threading and switching the fs/gs registers quickly there. Another use case is having (relatively) cheap access to a new address register per thread.
The instructions are opt-in and have to be explicitely enabled by the OS.
Previously Linux couldn't support this because the paranoid entry code relied on the gs base never being negative outside the kernel to decide when to use swaps. It would check the gs MSR value and assume it was already running in kernel if the value was already negative.
To make this work we have to revamp the paranoid exception path to not rely on this. We can use the new instructions to get (relatively) quick access to the values.
This is also significantly faster than a MSR read, so will speed NMIs (critical for profiling)
The original patch compared the gs with the kernel gs and assumed that if it was the same swapgs is not needed (and no user space processing was needed). This was nice and simple and didn't need a lot of changes.
But this had the side effect that if a user process set its GS to the same as the kernel it may lose rescheduling checks (so a racing reschedule IPI would have been only acted upon the next non paranoid interrupt)
This version now switches to full save/restore of the GS. This requires quite some changes in the paranoid path. Unfortunately didn't come up with a simpler scheme:
The kernel gs for the paranoid path is now stored at the bottom of the IST stack (so that it can be derived from RSP). For this we need to know the size of the IST stack (4K or 8K), which is now passed in as a stack parameter to save_paranoid.
Previously we had a flag in EBX that indicated whether SWAPGS needs to be called later or not. In the new scheme this turns into a tristate, with a new "restore from R15" mode. The exit paths are all adjusted to handle this correctly.
There is one complication: to allow debuggers (especially from the int3 or debug vectors) access to the user GS we need to save it in the task struct. Normally the next context switch would overwrite it with the wrong value from kernel_gs, so we set new flag also in task_struct that prevents it.
Also to prevent recursive interrupts clobbering this state in the task_struct this is only done for interrupts coming from ring 3.
After a schedule comes back we check if the flag is still set. If it wasn't set the GS is back in the (swapped) kernel gs so we revert to the SWAPGS mode, instead of restoring GS.
Then after these changes we need to also use the new instructions to save/restore fs and gs, so that the new values set by the users won't disappear. This is also significantly faster for the case when the 64bit base has to be switched (that is when GS is larger than 4GB), as we can replace the slow MSR write with a faster wr[fg]sbase execution.
The instructions do not context switch
the segment index, so the old invariant that fs or gs index have to be 0 for a different 64bit value to stick is still true. Previously it was enforced by arch_prctl, now the user program has to make sure it keeps the segment indexes zero. If it doesn't the changes may not stick.
This is in term enables fast switching when there are enough threads that their TLS segment does not fit below 4GB, or alternatively programs that use fs as an additional base register will not get a sigificant context switch penalty.
It is all done in a single patch to avoid bisect crash holes.
v2: Change to save/restore GS instead of using swapgs based on the value. Large scale changes.
:040000 040000 72be5ec449f27226e19fa757839ca3f32cc9cb53 40849afca9867b6bb3538fe81567afa52de36238 M arch
bisect run success
HEAD is now at 598d570a... x86: Add intrinsics/macros for new rd/wr fs/gs base instructions
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:598d570a05cd31500fb15a843a92f68ddb1b3618:bisect-linux-3
2014-10-04 11:59:02 598d570a05cd31500fb15a843a92f68ddb1b3618 reuse /kernel/x86_64-randconfig-hsb0-10041007/598d570a05cd31500fb15a843a92f68ddb1b3618/vmlinuz-3.17.0-rc7-00003-g598d570a
2014-10-04 11:59:02 detecting boot state ........ 106 116 117 202 210 SUCCESS
Previous HEAD position was 598d570a... x86: Add intrinsics/macros for new rd/wr fs/gs base instructions
HEAD is now at cd94c01... 0day head guard for 'devel-hourly-2014100409'
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linux-devel:devel-hourly-2014100409:cd94c0185489f0cddcbfa80e86258bb4609b6e1d:bisect-linux-3
TEST FAILURE
[ 0.246406] regulator-dummy: no parameters [ 0.251226] NET: Registered protocol family 16 [ 0.251226] NET: Registered protocol family 16 [ 0.275045] double fault: ffff [#1] [ 0.275045] double fault: ffff [#1] PREEMPT PREEMPT SMP SMP DEBUG_PAGEALLOCDEBUG_PAGEALLOC
[ 0.276000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-03833-gcd94c01 #138 [ 0.276000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc7-03833-gcd94c01 #138
/kernel/x86_64-randconfig-hsb0-10041007/cd94c0185489f0cddcbfa80e86258bb4609b6e1d/dmesg-quantal-lkp-nex04-80:20141004101903:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/cd94c0185489f0cddcbfa80e86258bb4609b6e1d/dmesg-yocto-lkp-nex04-45:20141004101308:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/cd94c0185489f0cddcbfa80e86258bb4609b6e1d/dmesg-quantal-lkp-nex04-192:20141004102354:x86_64-randconfig-hsb0-10041007::
/kernel/x86_64-randconfig-hsb0-10041007/cd94c0185489f0cddcbfa80e86258bb4609b6e1d/dmesg-quantal-lkp-nex04-137:20141004102354:x86_64-randconfig-hsb0-10041007::
17:4:4 all_good:bad:all_bad boots
HEAD is now at cd94c01 0day head guard for 'devel-hourly-2014100409'
========= linus/master =========
Note: checking out 'linus/master'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 126d457... Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/linus:master:126d4576cb73c8a440adc37c129589cd66051bcc:bisect-linux-3
2014-10-04 12:05:37 126d4576cb73c8a440adc37c129589cd66051bcc compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-126d4576cb73c8a440adc37c129589cd66051bcc Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/126d4576cb73c8a440adc37c129589cd66051bcc
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-126d4576cb73c8a440adc37c129589cd66051bcc
kernel: /kernel/x86_64-randconfig-hsb0-10041007/126d4576cb73c8a440adc37c129589cd66051bcc/vmlinuz-3.17.0-rc7-00094-g126d457
2014-10-04 12:07:38 detecting boot state ..... 51 184 210 SUCCESS
========= next/master =========
From git://gitmirror/next
+ 42fcd42...ddf678b akpm -> next/akpm (forced update) + 249a541...7086e78 akpm-base -> next/akpm-base (forced update) + 8953338...2e1d004 master -> next/master (forced update) fe82dce..b601ce0 stable -> next/stable
From git://gitmirror/next
* [new tag] next-20141002 -> next-20141002
* [new tag] next-20141003 -> next-20141003
Previous HEAD position was 126d457... Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
HEAD is now at 2e1d004... Add linux-next specific files for 20141003
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-hsb0-10041007/next:master:2e1d004b9645628c64a2db55ef6b81fadf5e6e91:bisect-linux-3
2014-10-04 12:12:21 2e1d004b9645628c64a2db55ef6b81fadf5e6e91 compiling
Queued build task to /kbuild-tests/build-queue/lkp-hsx02/x86_64-randconfig-hsb0-10041007-2e1d004b9645628c64a2db55ef6b81fadf5e6e91 Check for kernel in /kernel/x86_64-randconfig-hsb0-10041007/2e1d004b9645628c64a2db55ef6b81fadf5e6e91
waiting for completion of /kbuild-tests/build-queue/lkp-hsx02-smoke/x86_64-randconfig-hsb0-10041007-2e1d004b9645628c64a2db55ef6b81fadf5e6e91
kernel: /kernel/x86_64-randconfig-hsb0-10041007/2e1d004b9645628c64a2db55ef6b81fadf5e6e91/vmlinuz-3.17.0-rc7-next-20141003
2014-10-04 12:15:21 detecting boot state ... 59 92 138 204 210 SUCCESS
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.17.0-rc7 Kernel Configuration
#CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ARCH_WANT_HUGE_PMD_SHARE=yCONFIG_ARCH_WANT_GENERAL_HUGETLB=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_CONSTRUCTORS=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_FHANDLE is not setCONFIG_USELIB=yCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=y
# CONFIG_AUDITSYSCALL is not set
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not setCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not setCONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_RCU_FAST_NO_HZ is not set CONFIG_TREE_RCU_TRACE=yCONFIG_RCU_BOOST=yCONFIG_RCU_BOOST_PRIO=1 CONFIG_RCU_BOOST_DELAY=500 CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set CONFIG_RCU_NOCB_CPU_ZERO=y
# CONFIG_RCU_NOCB_CPU_ALL is not set CONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y CONFIG_ARCH_USES_NUMA_PROT_NONE=y
# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set CONFIG_NUMA_BALANCING=yCONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set CONFIG_CGROUP_PERF=yCONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_ANON_INODES=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=yCONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_PRINTK=yCONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set CONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set CONFIG_EVENTFD=yCONFIG_SHMEM=y
# CONFIG_AIO is not set CONFIG_PCI_QUIRKS=yCONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=yCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_SLUB_CPU_PARTIAL=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=yCONFIG_OPROFILE_EVENT_MULTIPLEX=yCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=yCONFIG_JUMP_LABEL=yCONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_KPROBES_ON_FTRACE=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_CONTIGUOUS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ALIGNED_STRUCT_PAGE=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_HAVE_CC_STACKPROTECTOR=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not setCONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not setCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=yCONFIG_HAVE_ARCH_SOFT_DIRTY=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
#
# GCOV-based kernel profiling
#CONFIG_GCOV_KERNEL=yCONFIG_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_FORMAT_AUTODETECT is not set
# CONFIG_GCOV_FORMAT_3_4 is not setCONFIG_GCOV_FORMAT_4_7=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=1
# CONFIG_MODULES is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_CMDLINE_PARSER=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not setCONFIG_ACORN_PARTITION_EESOX=yCONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not setCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not setCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not setCONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_CFQ is not setCONFIG_DEFAULT_NOOP=yCONFIG_DEFAULT_IOSCHED="noop"CONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUE_RWLOCK=yCONFIG_QUEUE_RWLOCK=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not setCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not setCONFIG_XEN=yCONFIG_XEN_DOM0=yCONFIG_XEN_PVHVM=yCONFIG_XEN_MAX_DOMAIN_MEMORY=500CONFIG_XEN_SAVE_RESTORE=yCONFIG_XEN_DEBUG_FS=y
# CONFIG_XEN_PVH is not setCONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not setCONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_PARAVIRT_CLOCK=yCONFIG_NO_BOOTMEM=yCONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not setCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=y
# CONFIG_DMI is not setCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_MAXSMP=yCONFIG_NR_CPUS=8192CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_COUNT=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_X86_16BIT is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not setCONFIG_NUMA=y
# CONFIG_AMD_NUMA is not setCONFIG_X86_64_ACPI_NUMA=yCONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not setCONFIG_NODES_SHIFT=10CONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_MEMBLOCK=yCONFIG_HAVE_MEMBLOCK_NODE_MAP=yCONFIG_ARCH_DISCARD_MEMBLOCK=yCONFIG_MOVABLE_NODE=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not setCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_BALLOON_COMPACTION is not setCONFIG_COMPACTION=yCONFIG_MIGRATION=yCONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not setCONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not setCONFIG_ZPOOL=yCONFIG_ZBUD=yCONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not setCONFIG_GENERIC_EARLY_IOREMAP=yCONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not setCONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not setCONFIG_EFI=y
# CONFIG_EFI_STUB is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not setCONFIG_CRASH_DUMP=yCONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x200000CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_CMDLINE_BOOL is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not setCONFIG_HIBERNATE_CALLBACKS=yCONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not setCONFIG_PM_WAKELOCKS=yCONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
# CONFIG_PM_RUNTIME is not setCONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not setCONFIG_ACPI=yCONFIG_ACPI_LEGACY_TABLES_LOOKUP=yCONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=yCONFIG_ACPI_EC_DEBUGFS=yCONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not setCONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not setCONFIG_ACPI_DOCK=y
# CONFIG_ACPI_PROCESSOR is not setCONFIG_ACPI_IPMI=yCONFIG_ACPI_NUMA=yCONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not setCONFIG_ACPI_SBS=yCONFIG_ACPI_HED=yCONFIG_ACPI_CUSTOM_METHOD=yCONFIG_ACPI_BGRT=yCONFIG_ACPI_REDUCED_HARDWARE_ONLY=yCONFIG_HAVE_ACPI_APEI=yCONFIG_HAVE_ACPI_APEI_NMI=yCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_PCI_DOMAINS=yCONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_PCI_REALLOC_ENABLE_AUTO=yCONFIG_PCI_STUB=yCONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_HT_IRQ is not setCONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not setCONFIG_PCI_PASID=y
# CONFIG_PCI_IOAPIC is not setCONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
# CONFIG_ISA_DMA_API is not setCONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not setCONFIG_RAPIDIO=yCONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not setCONFIG_RAPIDIO_DMA_ENGINE=yCONFIG_RAPIDIO_DEBUG=yCONFIG_RAPIDIO_ENUM_BASIC=y
#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_TSI57X is not setCONFIG_RAPIDIO_CPS_XX=yCONFIG_RAPIDIO_TSI568=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=yCONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_COREDUMP=y
# CONFIG_IA32_EMULATION is not setCONFIG_X86_DEV_DMA_OPS=yCONFIG_IOSF_MBI=yCONFIG_PMC_ATOM=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not setCONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=y
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=y
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NET_PTP_CLASSIFY=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=y
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=yCONFIG_ATM=yCONFIG_ATM_LANE=yCONFIG_STP=yCONFIG_BRIDGE=yCONFIG_HAVE_NET_DSA=yCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=y
# CONFIG_VLAN_8021Q is not setCONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=yCONFIG_LLC2=y
# CONFIG_IPX is not setCONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not setCONFIG_LAPB=yCONFIG_PHONET=yCONFIG_IEEE802154=yCONFIG_MAC802154=y
# CONFIG_NET_SCHED is not setCONFIG_DCB=yCONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
# CONFIG_BATMAN_ADV_DEBUG is not setCONFIG_OPENVSWITCH=yCONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not setCONFIG_NETLINK_MMAP=yCONFIG_NETLINK_DIAG=yCONFIG_NET_MPLS_GSO=yCONFIG_HSR=yCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=yCONFIG_CGROUP_NET_PRIO=yCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_HAMRADIO is not setCONFIG_CAN=yCONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not setCONFIG_CAN_GW=y
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=yCONFIG_CAN_SLCAN=yCONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not setCONFIG_CAN_LEDS=yCONFIG_CAN_SJA1000=yCONFIG_CAN_SJA1000_ISA=yCONFIG_CAN_SJA1000_PLATFORM=yCONFIG_CAN_EMS_PCI=y
# CONFIG_CAN_PEAK_PCI is not set
# CONFIG_CAN_KVASER_PCI is not setCONFIG_CAN_PLX_PCI=yCONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not setCONFIG_CAN_C_CAN_PCI=y
# CONFIG_CAN_CC770 is not set
#
# CAN USB interfaces
#CONFIG_CAN_EMS_USB=yCONFIG_CAN_ESD_USB2=yCONFIG_CAN_GS_USB=yCONFIG_CAN_KVASER_USB=yCONFIG_CAN_PEAK_USB=yCONFIG_CAN_8DEV_USB=y
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not setCONFIG_IRNET=yCONFIG_IRCOMM=yCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#
# CONFIG_DONGLE is not setCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=yCONFIG_KS959_DONGLE=y
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not setCONFIG_VLSI_FIR=y
# CONFIG_MCS_FIR is not setCONFIG_BT=yCONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not setCONFIG_BT_BNEP=yCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=yCONFIG_BT_HCIBTSDIO=y
# CONFIG_BT_HCIUART is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=yCONFIG_BT_HCIBFUSB=yCONFIG_BT_HCIVHCI=yCONFIG_BT_MRVL=yCONFIG_BT_MRVL_SDIO=yCONFIG_BT_ATH3K=y
# CONFIG_BT_WILINK is not set
# CONFIG_WIRELESS is not setCONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=yCONFIG_RFKILL_REGULATOR=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not setCONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
#
# Bus devices
#CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not setCONFIG_MTD_CMDLINE_PARTS=yCONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=y
# CONFIG_MTD_BLOCK is not setCONFIG_MTD_BLOCK_RO=yCONFIG_FTL=yCONFIG_NFTL=y
# CONFIG_NFTL_RW is not setCONFIG_INFTL=yCONFIG_RFD_FTL=yCONFIG_SSFDC=yCONFIG_SM_FTL=y
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=yCONFIG_MTD_JEDECPROBE=yCONFIG_MTD_GEN_PROBE=yCONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not setCONFIG_MTD_CFI_LE_BYTE_SWAP=y
# CONFIG_MTD_CFI_GEOMETRY is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_OTP=yCONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not setCONFIG_MTD_CFI_STAA=yCONFIG_MTD_CFI_UTIL=yCONFIG_MTD_RAM=yCONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SBC_GXX is not setCONFIG_MTD_AMD76XROM=yCONFIG_MTD_ICHXROM=yCONFIG_MTD_ESB2ROM=y
# CONFIG_MTD_CK804XROM is not setCONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not setCONFIG_MTD_PCI=yCONFIG_MTD_GPIO_ADDR=y
# CONFIG_MTD_INTEL_VR_NOR is not setCONFIG_MTD_PLATRAM=y
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=yCONFIG_MTD_PMC551_BUGFIX=yCONFIG_MTD_PMC551_DEBUG=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not setCONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not setCONFIG_MTD_NAND_ECC=yCONFIG_MTD_NAND_ECC_SMC=yCONFIG_MTD_NAND=yCONFIG_MTD_NAND_BCH=yCONFIG_MTD_NAND_ECC_BCH=yCONFIG_MTD_SM_COMMON=yCONFIG_MTD_NAND_DENALI=y
# CONFIG_MTD_NAND_DENALI_PCI is not setCONFIG_MTD_NAND_GPIO=yCONFIG_MTD_NAND_IDS=yCONFIG_MTD_NAND_RICOH=yCONFIG_MTD_NAND_DISKONCHIP=yCONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=yCONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not setCONFIG_MTD_NAND_DOCG4=y
# CONFIG_MTD_NAND_CAFE is not setCONFIG_MTD_NAND_NANDSIM=yCONFIG_MTD_NAND_PLATFORM=yCONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not setCONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not setCONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_UBI is not setCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=yCONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not setCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS or INET not selected #CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_NVME is not set CONFIG_BLK_DEV_SKD=yCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_VIRTIO_BLK=yCONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not setCONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=yCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=yCONFIG_TIFM_7XX1=yCONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not setCONFIG_HP_ILO=yCONFIG_APDS9802ALS=yCONFIG_ISL29003=yCONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not setCONFIG_SENSORS_BH1780=y
# CONFIG_SENSORS_BH1770 is not setCONFIG_SENSORS_APDS990X=yCONFIG_HMC6352=yCONFIG_DS1682=yCONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085_I2C is not setCONFIG_USB_SWITCH_FSA9480=yCONFIG_SRAM=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_LEGACY=yCONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not setCONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #CONFIG_TI_ST=y
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not setCONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#CONFIG_INTEL_MIC_BUS=y
#
# Intel MIC Host Driver
#
# CONFIG_INTEL_MIC_HOST is not set
#
# Intel MIC Card Driver
#
# CONFIG_INTEL_MIC_CARD is not setCONFIG_GENWQE=yCONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not setCONFIG_HAVE_IDE=yCONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #CONFIG_IDE_XFER_MODE=yCONFIG_IDE_TIMINGS=yCONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not setCONFIG_IDE_GD=y
# CONFIG_IDE_GD_ATA is not setCONFIG_IDE_GD_ATAPI=yCONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=yCONFIG_BLK_DEV_PLATFORM=yCONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_PCIBUS_ORDER=yCONFIG_BLK_DEV_OFFBOARD=yCONFIG_BLK_DEV_GENERIC=yCONFIG_BLK_DEV_OPTI621=yCONFIG_BLK_DEV_RZ1000=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not setCONFIG_BLK_DEV_ALI15X3=yCONFIG_BLK_DEV_AMD74XX=yCONFIG_BLK_DEV_ATIIXP=yCONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not setCONFIG_BLK_DEV_HPT366=yCONFIG_BLK_DEV_JMICRON=yCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not setCONFIG_BLK_DEV_IT821X=yCONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not setCONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not setCONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not setCONFIG_BLK_DEV_SLC90E66=yCONFIG_BLK_DEV_TRM290=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not setCONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not setCONFIG_CHR_DEV_SCH=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_BOOT_SYSFS=yCONFIG_SCSI_BNX2_ISCSI=yCONFIG_BE2ISCSI=yCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_HPSA=y
# CONFIG_SCSI_3W_9XXX is not setCONFIG_SCSI_3W_SAS=yCONFIG_SCSI_ACARD=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not setCONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not setCONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not setCONFIG_SCSI_MVSAS_TASKLET=yCONFIG_SCSI_MVUMI=yCONFIG_SCSI_DPT_I2O=y
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not setCONFIG_SCSI_ESAS2R=y
# CONFIG_MEGARAID_NEWGEN is not setCONFIG_MEGARAID_LEGACY=yCONFIG_MEGARAID_SAS=yCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not setCONFIG_SCSI_MPT3SAS=yCONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT3SAS_LOGGING is not setCONFIG_SCSI_UFSHCD=yCONFIG_SCSI_UFSHCD_PCI=yCONFIG_SCSI_UFSHCD_PLATFORM=y
# CONFIG_SCSI_HPTIOP is not setCONFIG_VMWARE_PVSCSI=y
# CONFIG_HYPERV_STORAGE is not setCONFIG_SCSI_DMX3191D=yCONFIG_SCSI_FUTURE_DOMAIN=yCONFIG_SCSI_ISCI=yCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not setCONFIG_SCSI_DEBUG=yCONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not setCONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not setCONFIG_FUSION=yCONFIG_FUSION_SPI=yCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not setCONFIG_FIREWIRE_NOSY=yCONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not setCONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
# CONFIG_I2O_CONFIG is not set
# CONFIG_I2O_BUS is not setCONFIG_I2O_BLOCK=y
# CONFIG_I2O_SCSI is not setCONFIG_I2O_PROC=yCONFIG_MACINTOSH_DRIVERS=yCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=yCONFIG_DUMMY=yCONFIG_EQUALIZER=y
# CONFIG_NET_FC is not setCONFIG_NET_TEAM=yCONFIG_NET_TEAM_MODE_BROADCAST=y
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
# CONFIG_NET_TEAM_MODE_RANDOM is not set
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not setCONFIG_MACVLAN=yCONFIG_MACVTAP=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_RIONET=yCONFIG_RIONET_TX_SIZE=128CONFIG_RIONET_RX_SIZE=128CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not setCONFIG_SUNGEM_PHY=yCONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not setCONFIG_ARCNET_1051=yCONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=yCONFIG_ARCNET_RIM_I=yCONFIG_ARCNET_COM20020=yCONFIG_ARCNET_COM20020_PCI=yCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=yCONFIG_ATM_LANAI=yCONFIG_ATM_ENI=y
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=y
# CONFIG_ATM_ZATM is not setCONFIG_ATM_NICSTAR=y
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not setCONFIG_ATM_IDT77252=yCONFIG_ATM_IDT77252_DEBUG=y
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=yCONFIG_ATM_AMBASSADOR_DEBUG=y
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not setCONFIG_ATM_SOLOS=y
#
# CAIF transport drivers
#CONFIG_VHOST_NET=yCONFIG_VHOST_RING=yCONFIG_VHOST=y
#
# Distributed Switch Architecture drivers
#CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not setCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not setCONFIG_ETHERNET=yCONFIG_MDIO=yCONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not setCONFIG_TYPHOON=yCONFIG_NET_VENDOR_ADAPTEC=yCONFIG_ADAPTEC_STARFIRE=y
# CONFIG_NET_VENDOR_ALTEON is not setCONFIG_ALTERA_TSE=y
# CONFIG_NET_VENDOR_AMD is not setCONFIG_NET_XGENE=y
# CONFIG_NET_VENDOR_ARC is not setCONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not setCONFIG_ATL1=yCONFIG_ATL1E=yCONFIG_ATL1C=yCONFIG_ALX=yCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_BNX2=yCONFIG_CNIC=yCONFIG_TIGON3=yCONFIG_BNX2X=y
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not setCONFIG_NET_VENDOR_EMULEX=yCONFIG_BE2NET=yCONFIG_NET_VENDOR_EXAR=yCONFIG_S2IO=yCONFIG_VXGE=yCONFIG_VXGE_DEBUG_TRACE_ALL=y
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not setCONFIG_IP1000=yCONFIG_JME=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not setCONFIG_NET_VENDOR_MICREL=yCONFIG_KS8842=yCONFIG_KS8851_MLL=y
# CONFIG_KSZ884X_PCI is not setCONFIG_FEALNX=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not setCONFIG_NET_VENDOR_OKI=yCONFIG_ETHOC=y
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not setCONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not setCONFIG_NET_VENDOR_SIS=yCONFIG_SIS900=y
# CONFIG_SIS190 is not setCONFIG_SFC=y
# CONFIG_SFC_MTD is not set
# CONFIG_SFC_MCDI_MON is not setCONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not setCONFIG_SMSC9420=yCONFIG_NET_VENDOR_STMICRO=yCONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_PLATFORM is not setCONFIG_STMMAC_PCI=y
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not setCONFIG_NET_VENDOR_SUN=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NIU=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not setCONFIG_NET_VENDOR_WIZNET=yCONFIG_WIZNET_W5100=yCONFIG_WIZNET_W5300=yCONFIG_WIZNET_BUS_DIRECT=y
# CONFIG_WIZNET_BUS_INDIRECT is not set
# CONFIG_WIZNET_BUS_ANY is not setCONFIG_FDDI=yCONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not setCONFIG_SKFP=y
# CONFIG_NET_SB1000 is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_AT803X_PHY=yCONFIG_AMD_PHY=y
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not setCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not setCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=y
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not setCONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not setCONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not setCONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not setCONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not setCONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not setCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOATM is not setCONFIG_PPPOE=yCONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not setCONFIG_SLHC=yCONFIG_USB_NET_DRIVERS=yCONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not setCONFIG_USB_HSO=yCONFIG_USB_CDC_PHONET=yCONFIG_USB_IPHETH=y
# CONFIG_WLAN is not set
#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
# CONFIG_WAN is not set
# CONFIG_IEEE802154_DRIVERS is not setCONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_HYPERV_NET is not set
# CONFIG_ISDN is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=yCONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not setCONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not setCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_88PM80X_ONKEY=yCONFIG_INPUT_AD714X=yCONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_BMA150 is not setCONFIG_INPUT_MAX8925_ONKEY=y
# CONFIG_INPUT_MC13783_PWRBUTTON is not setCONFIG_INPUT_MMA8450=y
# CONFIG_INPUT_MPU3050 is not setCONFIG_INPUT_APANEL=yCONFIG_INPUT_GP2A=yCONFIG_INPUT_GPIO_BEEPER=yCONFIG_INPUT_GPIO_TILT_POLLED=yCONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_ATI_REMOTE2 is not setCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not setCONFIG_INPUT_POWERMATE=yCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_RETU_PWRBUTTON=y
# CONFIG_INPUT_UINPUT is not setCONFIG_INPUT_PCF8574=yCONFIG_INPUT_PWM_BEEPER=yCONFIG_INPUT_GPIO_ROTARY_ENCODER=yCONFIG_INPUT_DA9052_ONKEY=yCONFIG_INPUT_WM831X_ON=y
# CONFIG_INPUT_ADXL34X is not setCONFIG_INPUT_IMS_PCU=yCONFIG_INPUT_CMA3000=yCONFIG_INPUT_CMA3000_I2C=yCONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_SERIO_ALTERA_PS2=yCONFIG_SERIO_PS2MULT=yCONFIG_SERIO_ARC_PS2=y
# CONFIG_HYPERV_KEYBOARD is not setCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not setCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_SERIAL_NONSTANDARD=yCONFIG_ROCKETPORT=yCONFIG_CYCLADES=yCONFIG_CYZ_INTR=yCONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINKMP is not setCONFIG_SYNCLINK_GT=yCONFIG_NOZOMI=y
# CONFIG_ISI is not setCONFIG_N_HDLC=y
# CONFIG_N_GSM is not setCONFIG_TRACE_ROUTER=yCONFIG_TRACE_SINK=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y
# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_MFD_HSU=yCONFIG_SERIAL_MFD_HSU_CONSOLE=yCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_SERIAL_SCCNXP=yCONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not setCONFIG_SERIAL_ALTERA_UART=yCONFIG_SERIAL_ALTERA_UART_MAXPORTS=4CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200CONFIG_SERIAL_ALTERA_UART_CONSOLE=yCONFIG_SERIAL_ARC=yCONFIG_SERIAL_ARC_CONSOLE=yCONFIG_SERIAL_ARC_NR_PORTS=1CONFIG_SERIAL_RP2=yCONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not setCONFIG_TTY_PRINTK=yCONFIG_HVC_DRIVER=y
# CONFIG_HVC_XEN is not setCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=yCONFIG_IPMI_SI_PROBE_DEFAULTS=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not setCONFIG_HW_RANDOM_VIRTIO=yCONFIG_HW_RANDOM_TPM=yCONFIG_NVRAM=yCONFIG_R3964=yCONFIG_APPLICOM=yCONFIG_MWAVE=y
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HPET_MMAP_DEFAULT=yCONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not setCONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not setCONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not setCONFIG_TCG_INFINEON=yCONFIG_TCG_ST33_I2C=yCONFIG_TCG_XEN=yCONFIG_TELCLOCK=yCONFIG_DEVPORT=y
#
# I2C support
#CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not setCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not setCONFIG_I2C_CHARDEV=yCONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#CONFIG_I2C_MUX_GPIO=yCONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not setCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_NFORCE2=yCONFIG_I2C_NFORCE2_S4985=y
# CONFIG_I2C_SIS5595 is not setCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set CONFIG_I2C_DESIGNWARE_PCI=yCONFIG_I2C_GPIO=y
# CONFIG_I2C_KEMPLD is not setCONFIG_I2C_OCORES=yCONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=yCONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_ROBOTFUZZ_OSIF=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=yCONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not setCONFIG_SPMI=y
# CONFIG_HSI is not set
#
# PPS support
#CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=yCONFIG_DP83640_PHY=yCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=yCONFIG_GPIO_DEVRES=yCONFIG_GPIO_ACPI=yCONFIG_GPIOLIB_IRQCHIP=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=yCONFIG_GPIO_GENERIC=yCONFIG_GPIO_DA9052=yCONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_F7188X is not setCONFIG_GPIO_SCH311X=yCONFIG_GPIO_SCH=yCONFIG_GPIO_ICH=yCONFIG_GPIO_VX855=yCONFIG_GPIO_LYNXPOINT=y
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_LP3943 is not setCONFIG_GPIO_MAX7300=yCONFIG_GPIO_MAX732X=yCONFIG_GPIO_MAX732X_IRQ=yCONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not setCONFIG_GPIO_PCF857X=yCONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SX150X is not setCONFIG_GPIO_TC3589X=yCONFIG_GPIO_TPS65912=yCONFIG_GPIO_WM831X=yCONFIG_GPIO_WM8350=yCONFIG_GPIO_WM8994=yCONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not setCONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_INTEL_MID is not setCONFIG_GPIO_ML_IOH=yCONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#CONFIG_GPIO_KEMPLD=y
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_TPS6586X is not set
#
# USB GPIO expanders:
#
# CONFIG_GPIO_VIPERBOARD is not setCONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not setCONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not setCONFIG_W1_MASTER_DS1WM=yCONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=yCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2408=yCONFIG_W1_SLAVE_DS2408_READBACK=yCONFIG_W1_SLAVE_DS2413=yCONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not setCONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not setCONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_DS2780 is not setCONFIG_W1_SLAVE_DS2781=yCONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=y
# CONFIG_MAX8925_POWER is not setCONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not setCONFIG_WM8350_POWER=yCONFIG_TEST_POWER=yCONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not setCONFIG_BATTERY_DS2781=yCONFIG_BATTERY_DS2782=yCONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27x00=yCONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not setCONFIG_BATTERY_MAX17040=yCONFIG_BATTERY_MAX17042=yCONFIG_CHARGER_ISP1704=yCONFIG_CHARGER_MAX8903=yCONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not setCONFIG_CHARGER_MAX8998=yCONFIG_CHARGER_BQ2415X=yCONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24735 is not setCONFIG_CHARGER_SMB347=yCONFIG_CHARGER_TPS65090=yCONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not setCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not setCONFIG_SENSORS_ADM1025=yCONFIG_SENSORS_ADM1026=yCONFIG_SENSORS_ADM1029=yCONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not setCONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not setCONFIG_SENSORS_ADT7470=yCONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not setCONFIG_SENSORS_K8TEMP=yCONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_FAM15H_POWER is not setCONFIG_SENSORS_APPLESMC=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not setCONFIG_SENSORS_DS1621=yCONFIG_SENSORS_DA9052_ADC=yCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=yCONFIG_SENSORS_F71882FG=yCONFIG_SENSORS_F75375S=yCONFIG_SENSORS_MC13783_ADC=yCONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_GL518SM is not setCONFIG_SENSORS_GL520SM=yCONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not setCONFIG_SENSORS_GPIO_FAN=yCONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not setCONFIG_SENSORS_CORETEMP=yCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not setCONFIG_SENSORS_POWR1220=yCONFIG_SENSORS_LINEAGE=yCONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not setCONFIG_SENSORS_LTC4222=yCONFIG_SENSORS_LTC4245=yCONFIG_SENSORS_LTC4260=yCONFIG_SENSORS_LTC4261=yCONFIG_SENSORS_MAX16065=yCONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not setCONFIG_SENSORS_MAX197=yCONFIG_SENSORS_MAX6639=yCONFIG_SENSORS_MAX6642=yCONFIG_SENSORS_MAX6650=yCONFIG_SENSORS_MAX6697=yCONFIG_SENSORS_HTU21=yCONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_LM63 is not setCONFIG_SENSORS_LM73=yCONFIG_SENSORS_LM75=yCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not setCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not setCONFIG_SENSORS_LM90=yCONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not setCONFIG_SENSORS_LM95245=yCONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not setCONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not setCONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not setCONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not setCONFIG_SENSORS_SHTC1=yCONFIG_SENSORS_SIS5595=yCONFIG_SENSORS_DME1737=yCONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not setCONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not setCONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not setCONFIG_SENSORS_SMM665=yCONFIG_SENSORS_ADC128D818=yCONFIG_SENSORS_ADS1015=yCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_AMC6821=yCONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not setCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not setCONFIG_SENSORS_TMP401=y
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not setCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not setCONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not setCONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_WM8350 is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not setCONFIG_SENSORS_ATK0110=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not setCONFIG_SSB_DEBUG=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not setCONFIG_PMIC_DA903X=yCONFIG_PMIC_DA9052=yCONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not setCONFIG_MFD_DA9063=yCONFIG_MFD_MC13XXX=yCONFIG_MFD_MC13XXX_I2C=y
# CONFIG_HTC_PASIC3 is not setCONFIG_HTC_I2CPLD=yCONFIG_LPC_ICH=yCONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not setCONFIG_MFD_KEMPLD=yCONFIG_MFD_88PM800=yCONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not setCONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not setCONFIG_MFD_MAX8907=yCONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not setCONFIG_MFD_MAX8998=yCONFIG_MFD_VIPERBOARD=yCONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not setCONFIG_MFD_RDC321X=yCONFIG_MFD_RTSX_PCI=yCONFIG_MFD_RTSX_USB=yCONFIG_MFD_RC5T583=yCONFIG_MFD_SEC_CORE=yCONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not setCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=yCONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not setCONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not setCONFIG_MFD_TPS65090=yCONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS65218 is not setCONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not setCONFIG_MFD_TPS65912=yCONFIG_MFD_TPS65912_I2C=yCONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not setCONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not setCONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not setCONFIG_MFD_VX855=y
# CONFIG_MFD_ARIZONA_I2C is not setCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=yCONFIG_MFD_WM831X_I2C=yCONFIG_MFD_WM8350=yCONFIG_MFD_WM8350_I2C=yCONFIG_MFD_WM8994=yCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=yCONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not setCONFIG_REGULATOR_USERSPACE_CONSUMER=yCONFIG_REGULATOR_88PM800=yCONFIG_REGULATOR_ACT8865=yCONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_AS3711 is not setCONFIG_REGULATOR_DA903X=yCONFIG_REGULATOR_DA9052=yCONFIG_REGULATOR_DA9063=yCONFIG_REGULATOR_DA9210=yCONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not setCONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL6271A is not setCONFIG_REGULATOR_LP3971=yCONFIG_REGULATOR_LP3972=yCONFIG_REGULATOR_LP872X=yCONFIG_REGULATOR_LP8755=yCONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_MAX1586 is not setCONFIG_REGULATOR_MAX8649=yCONFIG_REGULATOR_MAX8660=yCONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not setCONFIG_REGULATOR_MAX8973=yCONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_S2MPA01 is not setCONFIG_REGULATOR_S2MPS11=y
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS6105X is not setCONFIG_REGULATOR_TPS62360=yCONFIG_REGULATOR_TPS65023=yCONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65090 is not setCONFIG_REGULATOR_TPS65217=yCONFIG_REGULATOR_TPS6586X=yCONFIG_REGULATOR_TPS65912=yCONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8350 is not setCONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_WM8994 is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not setCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=yCONFIG_INTEL_GTT=y
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
#
# Direct Rendering Manager
#
# CONFIG_DRM is not set
#
# Frame buffer Devices
#CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not setCONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not setCONFIG_FB_CYBER2000=yCONFIG_FB_CYBER2000_DDC=yCONFIG_FB_ARC=yCONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_UVESA=yCONFIG_FB_VESA=yCONFIG_FB_EFI=yCONFIG_FB_N411=yCONFIG_FB_HGA=yCONFIG_FB_OPENCORES=yCONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not setCONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not setCONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not setCONFIG_FB_I740=yCONFIG_FB_LE80578=yCONFIG_FB_CARILLO_RANCH=yCONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not set
# CONFIG_FB_INTEL_I2C is not setCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not setCONFIG_FB_RADEON=yCONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not setCONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not setCONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not setCONFIG_FB_SAVAGE=yCONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not setCONFIG_FB_NEOMAGIC=yCONFIG_FB_KYRO=yCONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_3DFX_I2C=yCONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not setCONFIG_FB_ARK=yCONFIG_FB_PM3=yCONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not setCONFIG_CARMINE_DRAM_CUSTOM=yCONFIG_FB_SMSCUFX=yCONFIG_FB_UDL=yCONFIG_FB_VIRTUAL=yCONFIG_XEN_FBDEV_FRONTEND=yCONFIG_FB_METRONOME=yCONFIG_FB_MB862XX=yCONFIG_FB_MB862XX_PCI_GDC=yCONFIG_FB_MB862XX_I2C=yCONFIG_FB_BROADSHEET=y
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_HYPERV is not setCONFIG_FB_SIMPLE=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=yCONFIG_LCD_PLATFORM=yCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_CARILLO_RANCH is not setCONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA903X is not setCONFIG_BACKLIGHT_DA9052=yCONFIG_BACKLIGHT_MAX8925=yCONFIG_BACKLIGHT_APPLE=yCONFIG_BACKLIGHT_SAHARA=yCONFIG_BACKLIGHT_WM831X=yCONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not setCONFIG_BACKLIGHT_LM3630A=yCONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_AS3711 is not setCONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not setCONFIG_VGASTATE=y
# CONFIG_LOGO is not setCONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not setCONFIG_UHID=y
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_ACRUX=yCONFIG_HID_ACRUX_FF=yCONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not setCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not setCONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not setCONFIG_HID_KYE=yCONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not setCONFIG_HID_GYRATION=yCONFIG_HID_ICADE=yCONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not setCONFIG_HID_LCPOWER=yCONFIG_HID_LENOVO=y
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not setCONFIG_HID_MONTEREY=yCONFIG_HID_MULTITOUCH=yCONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not setCONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not setCONFIG_HID_SAITEK=yCONFIG_HID_SAMSUNG=y
# CONFIG_HID_SPEEDLINK is not setCONFIG_HID_STEELSERIES=yCONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_HYPERV_MOUSE is not setCONFIG_HID_SMARTJOYPLUS=yCONFIG_SMARTJOYPLUS_FF=yCONFIG_HID_TIVO=y
# CONFIG_HID_TOPSEED is not setCONFIG_HID_THINGM=yCONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_WACOM is not setCONFIG_HID_WIIMOTE=yCONFIG_HID_XINMO=yCONFIG_HID_ZEROPLUS=yCONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
# CONFIG_USB_HID is not setCONFIG_HID_PID=y
#
# USB HID Boot Protocol drivers
#CONFIG_USB_KBD=y
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#CONFIG_I2C_HID=yCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not setCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_OTG=yCONFIG_USB_OTG_WHITELIST=yCONFIG_USB_OTG_BLACKLIST_HUB=yCONFIG_USB_OTG_FSM=yCONFIG_USB_MON=yCONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=yCONFIG_USB_XHCI_PLATFORM=yCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_PCI=yCONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not setCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=yCONFIG_USB_ISP1362_HCD=yCONFIG_USB_FUSBH200_HCD=yCONFIG_USB_FOTG210_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PCI is not set
# CONFIG_USB_OHCI_HCD_SSB is not setCONFIG_USB_OHCI_HCD_PLATFORM=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_SL811_HCD=yCONFIG_USB_SL811_HCD_ISO=yCONFIG_USB_R8A66597_HCD=yCONFIG_USB_RENESAS_USBHS_HCD=yCONFIG_USB_WHCI_HCD=yCONFIG_USB_HWA_HCD=y
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not setCONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_REALTEK=y CONFIG_USB_STORAGE_DATAFAB=y # CONFIG_USB_STORAGE_FREECOM is not set CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y # CONFIG_USB_STORAGE_SDDR09 is not set CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # CONFIG_USB_UAS is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=yCONFIG_USBIP_CORE=yCONFIG_USBIP_VHCI_HCD=yCONFIG_USBIP_HOST=y
# CONFIG_USBIP_DEBUG is not setCONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not setCONFIG_USB_MUSB_DUAL_ROLE=yCONFIG_USB_MUSB_TUSB6010=y
# CONFIG_USB_MUSB_UX500 is not setCONFIG_MUSB_PIO_ONLY=yCONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not setCONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#CONFIG_USB_DWC3_PCI=y
#
# Debugging features
#CONFIG_USB_DWC3_DEBUG=y
# CONFIG_USB_DWC3_VERBOSE is not set
# CONFIG_DWC3_HOST_USB3_LPM_ENABLE is not set
# CONFIG_USB_DWC2 is not setCONFIG_USB_CHIPIDEA=y
# CONFIG_USB_CHIPIDEA_UDC is not setCONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_DEBUG is not set
#
# USB port drivers
#CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not setCONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not setCONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not setCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=yCONFIG_USB_SERIAL_CP210X=yCONFIG_USB_SERIAL_CYPRESS_M8=yCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not setCONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not setCONFIG_USB_SERIAL_F81232=yCONFIG_USB_SERIAL_GARMIN=yCONFIG_USB_SERIAL_IPW=yCONFIG_USB_SERIAL_IUU=yCONFIG_USB_SERIAL_KEYSPAN_PDA=yCONFIG_USB_SERIAL_KEYSPAN=yCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not setCONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not setCONFIG_USB_SERIAL_KEYSPAN_USA19W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not setCONFIG_USB_SERIAL_KEYSPAN_USA49W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not setCONFIG_USB_SERIAL_KLSI=yCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_METRO=yCONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7840 is not setCONFIG_USB_SERIAL_MXUPORT=yCONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not setCONFIG_USB_SERIAL_OTI6858=yCONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not setCONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not setCONFIG_USB_SERIAL_SIERRAWIRELESS=yCONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not setCONFIG_USB_SERIAL_WWAN=y
# CONFIG_USB_SERIAL_OPTION is not setCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_OPTICON=yCONFIG_USB_SERIAL_XSENS_MT=y
# CONFIG_USB_SERIAL_WISHBONE is not setCONFIG_USB_SERIAL_ZTE=yCONFIG_USB_SERIAL_SSU100=y
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=yCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=yCONFIG_USB_LED=yCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=yCONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=yCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=yCONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not setCONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HSIC_USB3503 is not setCONFIG_USB_LINK_LAYER_TEST=yCONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not setCONFIG_USB_UEAGLEATM=yCONFIG_USB_XUSBATM=y
#
# USB Physical Layer drivers
#CONFIG_USB_PHY=yCONFIG_NOP_USB_XCEIV=yCONFIG_SAMSUNG_USBPHY=yCONFIG_SAMSUNG_USB2PHY=yCONFIG_SAMSUNG_USB3PHY=yCONFIG_USB_GPIO_VBUS=yCONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
# CONFIG_USB_ISP1301 is not setCONFIG_USB_GADGET=yCONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not setCONFIG_USB_GADGET_DEBUG_FS=yCONFIG_USB_GADGET_VBUS_DRAW=2CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#CONFIG_USB_FOTG210_UDC=y
# CONFIG_USB_GR_UDC is not setCONFIG_USB_R8A66597=yCONFIG_USB_RENESAS_USBHS_UDC=yCONFIG_USB_PXA27X=yCONFIG_USB_MV_UDC=yCONFIG_USB_MV_U3D=yCONFIG_USB_M66592=yCONFIG_USB_AMD5536UDC=yCONFIG_USB_NET2272=yCONFIG_USB_NET2272_DMA=yCONFIG_USB_NET2280=yCONFIG_USB_GOKU=y
# CONFIG_USB_EG20T is not setCONFIG_USB_DUMMY_HCD=yCONFIG_USB_LIBCOMPOSITE=yCONFIG_USB_F_ACM=yCONFIG_USB_U_SERIAL=yCONFIG_USB_U_ETHER=yCONFIG_USB_F_ECM=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not setCONFIG_USB_CDC_COMPOSITE=y
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not setCONFIG_UWB=yCONFIG_UWB_HWA=yCONFIG_UWB_WHCI=yCONFIG_UWB_I1480U=yCONFIG_MMC=y
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=yCONFIG_MMC_BLOCK_MINORS=8CONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=yCONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PCI=yCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_SDHCI_ACPI=yCONFIG_MMC_SDHCI_PLTFM=yCONFIG_MMC_TIFM_SD=yCONFIG_MMC_CB710=y
# CONFIG_MMC_VIA_SDMMC is not setCONFIG_MMC_VUB300=y
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not setCONFIG_MMC_REALTEK_PCI=yCONFIG_MMC_REALTEK_USB=y
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
842 lines not shown · raw message
Part of this message is not shown here. View the raw message.