cxusb: remove TechnoTrend CT2-4400 and CT2-4650 devices
Subsystems (2)
PATCH 2/3 cxusb: remove TechnoTrend CT2-4400 and CT2-4650 devices
Remove TechnoTrend CT2-4400 and CT2-4650 devices from cxusb. They are supported by dvb-usb-dvbsky driver in PATCH 3/3.
Signed-off-by Nibble Max <[email protected]>
--- drivers/media/usb/dvb-usb/Kconfig | 1 - drivers/media/usb/dvb-usb/cxusb.c | 298 -------------------------------------- drivers/media/usb/dvb-usb/cxusb.h | 4 - 3 files changed, 303 deletions(-)
drivers/media/usb/dvb-usb/Kconfig +0 -1
@@ -130,7 +130,6 @@ config DVB_USB_CXUSB Medion MD95700 hybrid USB2.0 device. DViCO FusionHDTV (Bluebird) USB2.0 devices - TechnoTrend TVStick CT2-4400 and CT2-4650 CI devices config DVB_USB_M920X tristate "Uli m920x DVB-T USB2.0 support"
drivers/media/usb/dvb-usb/cxusb.c +0 -298
358 lines not on this page · raw message
drivers/media/usb/dvb-usb/cxusb.h +0 -4
@@ -28,14 +28,10 @@#define CMD_ANALOG 0x50#define CMD_DIGITAL 0x51 -#define CMD_SP2_CI_WRITE 0x70 -#define CMD_SP2_CI_READ 0x71 -struct cxusb_state {u8 gpio_write_state[3 ];struct i2c_client *i2c_client_demod;struct i2c_client *i2c_client_tuner; -struct i2c_client *i2c_client_ci; };#endif
Signature · 1 line
1.9.1
Reviewed-by Olli Salonen <[email protected]>
Quoted 418 lines · Nibble Max
Remove TechnoTrend CT2-4400 and CT2-4650 devices from cxusb. They are supported by dvb-usb-dvbsky driver in PATCH 3/3.
Signed-off-by Nibble Max <[email protected]>---
drivers/media/usb/dvb-usb/Kconfig | 1 - drivers/media/usb/dvb-usb/cxusb.c | 298 -------------------------------------- drivers/media/usb/dvb-usb/cxusb.h | 4 - 3 files changed, 303 deletions(-)drivers/media/usb/dvb-usb/Kconfig +0
-1@@ -130,7 +130,6 @@ config DVB_USB_CXUSB Medion MD95700 hybrid USB2.0 device. DViCO FusionHDTV (Bluebird) USB2.0 devices - TechnoTrend TVStick CT2-4400 and CT2-4650 CI devicesconfig
DVB_USB_M920Xtristate "Uli m920x DVB-T USB2.0 support"drivers/media/usb/dvb-usb/cxusb.c +0
-298@@ -44,7 +44,6 @@#include "atbm8830.h" #include "si2168.h" #include "si2157.h" -#include "sp2.h" /* Max transfer size done by I2C transfer functions */ #define MAX_XFER_SIZE 80@@ -147,22 +146,6 @@ static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, } } -static int cxusb_tt_ct2_4400_gpio_tuner (struct dvb_usb_device *d,int onoff) -{ -u8 o[2 ], i; -int rc; - - o[0 ] =0x83 ; - o[1 ] = onoff; - rc =cxusb_ctrl_msg (d,CMD_GPIO_WRITE , o,2 , &i,1 ); - -if (rc) { -deb_info ("gpio_write failed.\n" ); -return -EIO ; - } -return 0 ; -} -/* I2C */ static int cxusb_i2c_xfer (struct i2c_adapter *adap,struct i2c_msg msg[],int num)@@ -524,30 +507,6 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,return 0 ; } -static int cxusb_tt_ct2_4400_rc_query (struct dvb_usb_device *d) -{ -u8 i[2 ]; -int ret; -u32 cmd, keycode; -u8 rc5_cmd, rc5_addr, rc5_toggle; - - ret =cxusb_ctrl_msg (d,0x10 ,NULL ,0 , i,2 ); -if (ret) -return ret; - - cmd = (i[0 ] <<8 ) | i[1 ]; - -if (cmd !=0xffff ) { - rc5_cmd = cmd &0x3F ;/* bits 1-6 for command */ - rc5_addr = (cmd &0x07C0 ) >>6 ;/* bits 7-11 for address */ - rc5_toggle = (cmd &0x0800 ) >>11 ;/* bit 12 for toggle */ - keycode = (rc5_addr <<8 ) | rc5_cmd; -rc_keydown (d->rc_dev,RC_BIT_RC5 , keycode, rc5_toggle); - } - -return 0 ; -} -static struct rc_map_table rc_map_dvico_mce_table[] = { {0xfe02 ,KEY_TV }, {0xfe0e ,KEY_MP3 },@@ -673,70 +632,6 @@ static struct rc_map_table rc_map_d680_dmb_table[] = { { 0x0025, KEY_POWER }, }; -static int cxusb_tt_ct2_4400_read_mac_address (struct dvb_usb_device *d,u8 mac[6 ]) -{ -u8 wbuf[2 ]; -u8 rbuf[6 ]; -int ret; -struct i2c_msg msg[] = { - { - .addr =0x51 , - .flags =0 , - .buf = wbuf, - .len =2 , - }, { - .addr =0x51 , - .flags =I2C_M_RD , - .buf = rbuf, - .len =6 , - } - }; - - wbuf[0 ] =0x1e ; - wbuf[1 ] =0x00 ; - ret =cxusb_i2c_xfer (&d->i2c_adap, msg,2 ); - -if (ret ==2 ) { -memcpy (mac, rbuf,6 ); -return 0 ; - }else { -if (ret <0 ) -return ret; -return -EIO ; - } -} - -static int cxusb_tt_ct2_4650_ci_ctrl (void *priv,u8 read,int addr, -u8 data,int *mem) -{ -struct dvb_usb_device *d = priv; -u8 wbuf[3 ]; -u8 rbuf[2 ]; -int ret; - - wbuf[0 ] = (addr >>8 ) &0xff ; - wbuf[1 ] = addr &0xff ; - -if (read) { - ret =cxusb_ctrl_msg (d,CMD_SP2_CI_READ , wbuf,2 , rbuf,2 ); - }else { - wbuf[2 ] = data; - ret =cxusb_ctrl_msg (d,CMD_SP2_CI_WRITE , wbuf,3 , rbuf,1 ); - } - -if (ret) - goto err; - -if (read) - *mem = rbuf[1 ]; - -return 0 ; -err: -deb_info ("%s: ci usb write returned %d\n" , __func__, ret); -return ret; - -} -static int cxusb_dee1601_demod_init (struct dvb_frontend * fe) {static u8 clock_config [] = {CLOCK_CTL ,0x38 ,0x28 };@@ -1478,127 +1373,6 @@ static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap)return 0 ; } -static int cxusb_tt_ct2_4400_attach (struct dvb_usb_adapter *adap) -{ -struct dvb_usb_device *d = adap->dev; -struct cxusb_state *st = d->priv; -struct i2c_adapter *adapter; -struct i2c_client *client_demod; -struct i2c_client *client_tuner; -struct i2c_client *client_ci; -struct i2c_board_info info; -struct si2168_config si2168_config; -struct si2157_config si2157_config; -struct sp2_config sp2_config; -u8 o[2 ], i; - -/* reset the tuner */ -if (cxusb_tt_ct2_4400_gpio_tuner (d,0 ) <0 ) { -err ("clear tuner gpio failed" ); -return -EIO ; - } -msleep (100 ); -if (cxusb_tt_ct2_4400_gpio_tuner (d,1 ) <0 ) { -err ("set tuner gpio failed" ); -return -EIO ; - } -msleep (100 ); - -/* attach frontend */ -memset (&si2168_config,0 ,sizeof (si2168_config)); - si2168_config.i2c_adapter = &adapter; - si2168_config.fe = &adap->fe_adap[0 ].fe; - si2168_config.ts_mode =SI2168_TS_PARALLEL ; - -/* CT2-4400v2 TS gets corrupted without this */ -if (le16_to_cpu (d->udev->descriptor.idProduct) == -USB_PID_TECHNOTREND_TVSTICK_CT2_4400 ) - si2168_config.ts_mode |=0x40 ; - -memset (&info,0 ,sizeof (struct i2c_board_info )); -strlcpy (info.type,"si2168" ,I2C_NAME_SIZE ); - info.addr =0x64 ; - info.platform_data = &si2168_config; -request_module (info.type); - client_demod =i2c_new_device (&d->i2c_adap, &info); -if (client_demod ==NULL || client_demod->dev.driver ==NULL ) -return -ENODEV ; - -if (!try_module_get (client_demod->dev.driver->owner)) { -i2c_unregister_device (client_demod); -return -ENODEV ; - } - - st->i2c_client_demod = client_demod; - -/* attach tuner */ -memset (&si2157_config,0 ,sizeof (si2157_config)); - si2157_config.fe = adap->fe_adap[0 ].fe; -memset (&info,0 ,sizeof (struct i2c_board_info )); -strlcpy (info.type,"si2157" ,I2C_NAME_SIZE ); - info.addr =0x60 ; - info.platform_data = &si2157_config; -request_module (info.type); - client_tuner =i2c_new_device (adapter, &info); -if (client_tuner ==NULL || client_tuner->dev.driver ==NULL ) { -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); -return -ENODEV ; - } -if (!try_module_get (client_tuner->dev.driver->owner)) { -i2c_unregister_device (client_tuner); -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); -return -ENODEV ; - } - - st->i2c_client_tuner = client_tuner; - -/* initialize CI */ -if (le16_to_cpu (d->udev->descriptor.idProduct) == -USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI ) { - -memcpy (o,"\xc0\x01" ,2 ); -cxusb_ctrl_msg (d,CMD_GPIO_WRITE , o,2 , &i,1 ); -msleep (100 ); - -memcpy (o,"\xc0\x00" ,2 ); -cxusb_ctrl_msg (d,CMD_GPIO_WRITE , o,2 , &i,1 ); -msleep (100 ); - -memset (&sp2_config,0 ,sizeof (sp2_config)); - sp2_config.dvb_adap = &adap->dvb_adap; - sp2_config.priv = d; - sp2_config.ci_control = cxusb_tt_ct2_4650_ci_ctrl; -memset (&info,0 ,sizeof (struct i2c_board_info )); -strlcpy (info.type,"sp2" ,I2C_NAME_SIZE ); - info.addr =0x40 ; - info.platform_data = &sp2_config; -request_module (info.type); - client_ci =i2c_new_device (&d->i2c_adap, &info); -if (client_ci ==NULL || client_ci->dev.driver ==NULL ) { -module_put (client_tuner->dev.driver->owner); -i2c_unregister_device (client_tuner); -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); -return -ENODEV ; - } -if (!try_module_get (client_ci->dev.driver->owner)) { -i2c_unregister_device (client_ci); -module_put (client_tuner->dev.driver->owner); -i2c_unregister_device (client_tuner); -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); -return -ENODEV ; - } - - st->i2c_client_ci = client_ci; - - } - -return 0 ; -} -/* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -1681,7 +1455,6 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties;static struct dvb_usb_device_properties cxusb_d680_dmb_properties;static struct dvb_usb_device_properties cxusb_mygica_d689_properties;static struct dvb_usb_device_properties cxusb_mygica_t230_properties; -static struct dvb_usb_device_properties cxusb_tt_ct2_4400_properties;static int cxusb_probe (struct usb_interface *intf,const struct usb_device_id *id)@@ -1714,8 +1487,6 @@ static int cxusb_probe(struct usb_interface *intf, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_tt_ct2_4400_properties, - THIS_MODULE, NULL, adapter_nr) || 0)return 0 ;@@ -1728,13 +1499,6 @@ static void cxusb_disconnect(struct usb_interface *intf)struct cxusb_state *st = d->priv;struct i2c_client *client; -/* remove I2C client for CI */ - client = st->i2c_client_ci; -if (client) { -module_put (client->dev.driver->owner); -i2c_unregister_device (client); - } -/* remove I2C client for tuner */ client = st->i2c_client_tuner;if (client) {@@ -1773,8 +1537,6 @@ static struct usb_device_id cxusb_table [] = { { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) }, - { USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_TVSTICK_CT2_4400) }, - { USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI) }, { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230) }, {} /* Terminating entry */ };@@ -2422,66 +2184,6 @@ static struct dvb_usb_device_properties cxusb_mygica_d689_properties = { } }; -static struct dvb_usb_device_properties cxusb_tt_ct2_4400_properties = { - .caps =DVB_USB_IS_AN_I2C_ADAPTER , - - .usb_ctrl =CYPRESS_FX2 , - - .size_of_priv =sizeof (struct cxusb_state ), - - .num_adapters =1 , - .read_mac_address = cxusb_tt_ct2_4400_read_mac_address, - - .adapter = { - { - .num_frontends =1 , - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, -/* both frontend and tuner attached in the -same function */ - .frontend_attach = cxusb_tt_ct2_4400_attach, - -/* parameter for the MPEG2-data transfer */ - .stream = { - .type =USB_BULK , - .count =8 , - .endpoint =0x82 , - .u = { - .bulk = { - .buffersize =4096 , - } - } - }, - } }, - }, - }, - - .i2c_algo = &cxusb_i2c_algo, - .generic_bulk_ctrl_endpoint =0x01 , - .generic_bulk_ctrl_endpoint_response =0x81 , - - .rc.core = { - .rc_codes =RC_MAP_TT_1500 , - .allowed_protos =RC_BIT_RC5 , - .rc_query = cxusb_tt_ct2_4400_rc_query, - .rc_interval =150 , - }, - - .num_device_descs =2 , - .devices = { - { -"TechnoTrend TVStick CT2-4400" , - {NULL }, - { &cxusb_table[20 ],NULL }, - }, - { -"TechnoTrend TT-connect CT2-4650 CI" , - {NULL }, - { &cxusb_table[21 ],NULL }, - }, - } -}; -static struct dvb_usb_device_properties cxusb_mygica_t230_properties = { .caps =DVB_USB_IS_AN_I2C_ADAPTER ,drivers/media/usb/dvb-usb/cxusb.h +0
-4@@ -28,14 +28,10 @@#define CMD_ANALOG 0x50#define CMD_DIGITAL 0x51 -#define CMD_SP2_CI_WRITE 0x70 -#define CMD_SP2_CI_READ 0x71 -struct cxusb_state {u8 gpio_write_state[3 ];struct i2c_client *i2c_client_demod;struct i2c_client *i2c_client_tuner; -struct i2c_client *i2c_client_ci; };#endif Signature · 2 lines
-- 1.9.1
Quoted 4 lines · Nibble Max
Remove TechnoTrend CT2-4400 and CT2-4650 devices from cxusb. They are supported by dvb-usb-dvbsky driver in PATCH 3/3.
Signed-off-by Nibble Max <[email protected]>
Reviewed-by Antti Palosaari <[email protected]>
regards
Antti
Signature · 1 line
http://palosaari.fi/