Skip to contentSkip to conversation

Documentation/power/regulators/ ... cleanup ranges

PATCH New Pavel Machek 1 participant 1 message Dec 7, 2014

Subsystems (2)
Voltage and current regulator framework Suspend to RAM
lore
Share & tools
lore

Pavel Machek

author
#0 lore raw

PATCH 1/1 Documentation/power/regulators/ ... cleanup ranges

overview.txt uses '->' to indicate ranges, which is a bit non-traditional. I changed it to '..' to make it clear.

Signed-off-by Pavel Machek <[email protected]>
Documentation/power/regulator/overview.txt +3 -3
index 40ca2d6..4dd5dbb 100644
@@ -90,7 +90,7 @@ Some terms used in this document:-
                    operating parameters and is specified in the regulator
                    datasheet. i.e.
 
-                     - voltage output is in the range 800mV -> 3500mV.
+                     - voltage output is in the range 800mV .. 3500mV.
                      - regulator current output limit is 20mA @ 5V but is
                        10mA @ 10V.
 

@@ -99,8 +99,8 @@ Some terms used in this document:-
                    power domain to a particular power range. i.e.
 
                      - Domain-1 voltage is 3300mV
-                     - Domain-2 voltage is 1400mV -> 1600mV
-                     - Domain-3 current limit is 0mA -> 20mA.
+                     - Domain-2 voltage is 1400mV .. 1600mV
+                     - Domain-3 current limit is 0mA .. 20mA.
 
                    Consumer Level: This is defined by consumer drivers
                    dynamically setting voltage or current limit levels.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html