ARM: dts: use all remaining MTD space foor rootfs of Iomega ix2-200
PATCH 1/1 ARM: dts: use all remaining MTD space foor rootfs of Iomega ix2-200
In reply to a message not in the archiveThe original MTD partition layout for the Iomega ix2-200 leaves most of the available space unused. This patch changes the layout to use all remaining MTD space after the partitions for u-boot/u-boot-env and the kernel uimage as a "rootfs" partition.
Signed-off-by Richard Kunze <[email protected]>
--- arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +2 -2
@@ -196,8 +196,8 @@ }; partition at 400000 { - label = "uInitrd"; - reg = <0x540000 0x1000000>; + label = "rootfs"; + reg = <0x400000 0x1C00000>; }; };
Signature · 1 line
1.9.1
Andrew Lunn
AppliedPATCH 1/1 ARM: dts: use all remaining MTD space foor rootfs of Iomega ix2-200
Quoted 6 lines · Richard Kunze
The original MTD partition layout for the Iomega ix2-200 leaves most of the available space unused. This patch changes the layout to use all remaining MTD space after the partitions for u-boot/u-boot-env and the kernel uimage as a "rootfs" partition.
Signed-off-by Richard Kunze <[email protected]>
Hi Richard
Applied to mvebu/dt.
Andrew
Quoted 22 lines
--- arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +2
-2@@ -196,8 +196,8 @@ }; partition at 400000 { - label = "uInitrd"; - reg = <0x540000 0x1000000>; + label = "rootfs"; + reg = <0x400000 0x1C00000>; }; };Signature · 1 line
1.9.1