N900 v3.19-rc5 errors

Hello,

I'm getting these two errors when booting DT linux v3.19-rc5 in n900 qemu:

[    0.309234] device-tree: Duplicate name in onenand@0,0, renamed to "#1"
[    0.309417] device-tree: Duplicate name in onenand@0,0, renamed to "#2"
[    0.309844] device-tree: Duplicate name in ethernet@gpmc, renamed to "#1"
[    0.309967] device-tree: Duplicate name in ethernet@gpmc, renamed to "#2"

[    0.730743] ------------[ cut here ]------------
[    0.731018] WARNING: CPU: 0 PID: 31 at drivers/memory/omap-gpmc.c:1757 
gpmc_probe_generic_child+0x128/0x24c()
[    0.731475] enable GPMC debug to configure .dts timings for CS1
[    0.731781] Modules linked in:
[    0.732086] CPU: 0 PID: 31 Comm: kworker/u2:1 Not tainted 3.19.0-rc5+ #234
[    0.732391] Hardware name: Nokia RX-51 board
[    0.732757] Workqueue: deferwq deferred_probe_work_func
[    0.733306] [<c0012678>] (unwind_backtrace) from [<c0010d44>] (show_stack+0x10/0x14)
[    0.733703] [<c0010d44>] (show_stack) from [<c0032194>] (warn_slowpath_common+0x84/0xac)
[    0.734130] [<c0032194>] (warn_slowpath_common) from [<c003223c>] 
(warn_slowpath_fmt+0x2c/0x3c)
[    0.734527] [<c003223c>] (warn_slowpath_fmt) from [<c0308308>] 
(gpmc_probe_generic_child+0x128/0x24c)
[    0.734954] [<c0308308>] (gpmc_probe_generic_child) from [<c0308578>] 
(gpmc_probe_dt+0x14c/0x1dc)
[    0.735626] [<c0308578>] (gpmc_probe_dt) from [<c030877c>] (gpmc_probe+0x174/0x1c8)
[    0.735992] [<c030877c>] (gpmc_probe) from [<c0263d78>] (platform_drv_probe+0x48/0x90)
[    0.736358] [<c0263d78>] (platform_drv_probe) from [<c02624ec>] (really_probe+0xac/0x1e0)
[    0.736785] [<c02624ec>] (really_probe) from [<c0262718>] (driver_probe_device+0x30/0x48)
[    0.737152] [<c0262718>] (driver_probe_device) from [<c0260fe8>] (bus_for_each_drv+0x4c/0x84)
[    0.737548] [<c0260fe8>] (bus_for_each_drv) from [<c02626a0>] (device_attach+0x5c/0x88)
[    0.737915] [<c02626a0>] (device_attach) from [<c0261c1c>] (bus_probe_device+0x28/0x98)
[    0.738281] [<c0261c1c>] (bus_probe_device) from [<c0262010>] 
(deferred_probe_work_func+0x54/0x80)
[    0.738677] [<c0262010>] (deferred_probe_work_func) from [<c0046d48>] 
(process_one_work+0x280/0x45c)
[    0.739074] [<c0046d48>] (process_one_work) from [<c0047180>] (worker_thread+0x230/0x354)
[    0.739440] [<c0047180>] (worker_thread) from [<c004b084>] (kthread+0xcc/0xe0)
[    0.739776] [<c004b084>] (kthread) from [<c000dc78>] (ret_from_fork+0x14/0x3c)
[    0.740173] ---[ end trace 172dd94cb4e47d45 ]---

Pali Rohár
[email protected]

Hello Pali,

can you send me the kernel confguration and qemu command line you are using ?

Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

in n900 qemu:

Hello,

instructions how to use qemu for n900 I wrote on uboot ml:
http://lists.denx.de/pipermail/u-boot/2015-January/200171.html

Just replace u-boot.bin file with bootable kernel image zImage. In above instructions is u-boot.bin booted as regular kernel image by Nokia bootloader. If you do not have qflasher (for generating qemu MTD nand image) + Nokia bootloaders and you are OK with Nokia license I can provide you needed binaries.

Kernel config which I used you can find on:
https://gitorious.org/linux-n900/linux-n900/source/v3.19-rc5-n900:arch/arm/configs/rx51_defconfig

There is also v3.19-rc5-n900 branch which contains some patches:
https://gitorious.org/linux-n900/linux-n900

Pali Rohár
[email protected]

Hi,

I don't see these on real HW.

A.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html