mfd: Add support for COMe-cBL6 to Kontron PLD driver

PATCH Applied Michael Brunner 3 participants 3 messages Jan 27, 2015 – Feb 16, 2015 Multifunction devices (MFD)

Share & tools

Michael Brunner

author

2015-01-27 10:06 UTC #0 lore raw

PATCH 1/1 mfd: Add support for COMe-cBL6 to Kontron PLD driver

This patch adds the DMI system ID of the Kontron COMe-cBL6 board to the Kontron PLD driver. The list of supported products in the module description is also updated.

Signed-off-by Michael Brunner <[email protected]>

Acked-by Christian Rauch <[email protected]>

---
 drivers/mfd/Kconfig       |  1 +
 drivers/mfd/kempld-core.c | 11 +++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

drivers/mfd/Kconfig +1 -0

index 2e6b731..0c066b9 100644
@@ -352,6 +352,7 @@ config MFD_KEMPLD
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
+		* COMe-cBL6
 		* COMe-cBT6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)

drivers/mfd/kempld-core.c +9 -2

index f38ec42..61a1f9b 100644
@@ -508,8 +508,15 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
-	},
-	{
+	}, {
+		.ident = "CBL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CCR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),

Signature · 1 line

1.8.5.1

Guenter Roeck

Reviewed-by on v1 1/1

2015-01-27 14:28 UTC #1 lore raw

Quoted 6 lines · Michael Brunner

This patch adds the DMI system ID of the Kontron COMe-cBL6 board to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>
Acked-by Christian Rauch <[email protected]>

Reviewed-by Guenter Roeck <[email protected]>

Lee Jones

Applied

2015-02-16 14:39 UTC #2 lore raw

In reply to Michael Brunner

Quoted 10 lines · Michael Brunner

This patch adds the DMI system ID of the Kontron COMe-cBL6 board to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>
Acked-by Christian Rauch <[email protected]>
---
 drivers/mfd/Kconfig       |  1 +
 drivers/mfd/kempld-core.c | 11 +++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

Applied, thanks.

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog