bq2415x_charger.c: battery is discharged (fast, 224mA) when it should be charged
Hi!
I connected N900 with full battery using USB. For some reason, charge limit was set to 100mA, battery was "full" and was discharging:
root at n900:/my/tui/ofone# ./tefone
Ready.
Battery 4.017 V 4.039 V 81 % 0 % 0 / 0 / 2056 mAh Full -242.224 / 550 / 100 mA
I adjusted the current limit, but got no change, battery is still discharging, fast:
root at n900:/my/tui/ofone# echo 500 > /sys/class/power_supply/bq24150a-0/current_limit root at n900:/my/tui/ofone# ./tefone
Ready.
Battery 3.994 V 4.034 V 78 % 0 % 0 / 0 / 2056 mAh Full -251.506 / 550 / 500 mA Battery 4.0 V 4.037 V 79 % 0 % 0 / 0 / 2056 mAh Full -223.125 / 550 / 500 mA Battery 4.005 V 4.037 V 79 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 3.994 V 4.037 V 78 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 4.023 V 4.037 V 81 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 4.011 V 4.037 V 80 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 3.994 V 4.031 V 78 % 0 % 0 / 0 / 2056 mAh Full -256.504 / 550 / 500 mA Battery 3.994 V 4.029 V 78 % 0 % 0 / 0 / 2056 mAh Full -224.017 / 550 / 500 mA Battery 3.988 V 4.029 V 77 % 0 % 0 / 0 / 2056 mAh Full -224.731 / 550 / 500 mA Battery 4.005 V 4.023 V 79 % 0 % 0 / 0 / 2056 mAh Full -223.66 / 550 / 500 mA
I'm getting a lot of
[ 208.037719] bq27x00-battery 2-0055: battery is not calibrated! ignoring capacity values [ 238.038024] bq27x00-battery 2-0055: battery is not calibrated! ignoring capacity values
messages, that's why all the 0s in battery information dump.
Any ideas?
Thanks,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hello,
Quoted 6 lines · On Sunday 01 February 2015 10:47:02 Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason, charge limit was set to 100mA, battery was "full" and was discharging:
Make sure you have loaded some usb gadget. Without it battery charging via dedicated wallcharger (and probably also usb host charger) does not working. g_nokia should be OK.
Try also compiling kernel with CONFIG_USB_GADGET_VBUS_DRAW=500
Also for charger autodetection you need to have loaded isp1704_charer.ko module (or compiled into kernel).
And make sure that isp1704_charger is loaded before module bq2415x_charger (there is some probe defer, no idea if it works as excepted).
Quoted 10 lines
root at n900:/my/tui/ofone# ./tefone
Ready.
Battery 4.017 V 4.039 V 81 % 0 % 0 / 0 / 2056 mAh Full -242.224 / 550 / 100 mAI adjusted the current limit, but got no change, battery is still discharging, fast:
root at n900:/my/tui/ofone# echo 500 >
/sys/class/power_supply/bq24150a-0/current_limit
You can try to write "host" to sysfs entry "mode". Another value is "dedicated" for wallchargers.
Quoted 18 lines
root at n900:/my/tui/ofone# ./tefone
Ready.
Battery 3.994 V 4.034 V 78 % 0 % 0 / 0 / 2056 mAh Full -251.506 / 550 / 500 mA Battery 4.0 V 4.037 V 79 % 0 %0 / 0 / 2056 mAh Full -223.125 / 550 / 500 mA Battery 4.005 V 4.037 V 79 % 0 % 0 / 0 / 2056 mAh Full -224.91/ 550 / 500 mA Battery 3.994 V 4.037 V 78 % 0 % 0 / 0 /
2056 mAh Full -224.91 / 550 / 500 mA Battery 4.023 V
4.037 V 81 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 /
500 mA Battery 4.011 V 4.037 V 80 % 0 % 0 / 0 / 2056
mAh Full -224.91 / 550 / 500 mA Battery 3.994 V 4.031 V
78 % 0 % 0 / 0 / 2056 mAh Full -256.504 / 550 / 500 mA
Battery 3.994 V 4.029 V 78 % 0 % 0 / 0 / 2056 mAh Full
-224.017 / 550 / 500 mA Battery 3.988 V 4.029 V 77 % 0
% 0 / 0 / 2056 mAh Full -224.731 / 550 / 500 mA Battery
4.005 V 4.023 V 79 % 0 % 0 / 0 / 2056 mAh Full -223.66
/ 550 / 500 mA
Quoted 7 lines
I'm getting a lot of
[ 208.037719] bq27x00-battery 2-0055: battery is notcalibrated! ignoring capacity values [ 238.038024] bq27x00-battery 2-0055: battery is not calibrated! ignoring capacity values
Message is print every time when somebody try to read those properties. I think that printing it only one time should be enough. Change to WARN_ONCE?
Also design capacity from bq27x00_battery is incorrect (2056) on all N900 devices. It comes from some EEPROM memory stored in N900 and without HW hacking it is not possible to rewrite.
I would suggest to add support for bq27x00_battery module to do not report design capacity. Maybe in N900 DT file can be property which tell driver to ignore it.
Quoted 6 lines
messages, that's why all the 0s in battery information dump.
Any ideas?
Thanks,
Pavel
Signature · 9 lines
Pali Roh?r pali.rohar at gmail.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150201/d652accd/attachment.sig>
Hi!
Quoted 11 lines · Pali Roh?r
Quoted 6 lines · On Sunday 01 February 2015 10:47:02 Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason, charge limit was set to 100mA, battery was "full" and was discharging:
Make sure you have loaded some usb gadget. Without it battery charging via dedicated wallcharger (and probably also usb host charger) does not working.
g_nokiashould be OK.
I had that loaded (was running from root over USB at the moment.)
Quoted 8 lines
Try also compiling kernel with
CONFIG_USB_GADGET_VBUS_DRAW=500Also for charger autodetection you need to have loaded isp1704_charer.ko module (or compiled into kernel).
And make sure that
isp1704_chargeris loaded before modulebq2415x_charger(there is some probe defer, no idea if it works as excepted).
It seems bq2415x_charger is the problem: it all started working when I did echo reset > mode...
Best regards,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 22 lines · Pavel Machek
Hi!
Quoted 11 lines · Pali Roh?r
Quoted 6 lines · On Sunday 01 February 2015 10:47:02 Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason, charge limit was set to 100mA, battery was "full" and was discharging:
Make sure you have loaded some usb gadget. Without it battery charging via dedicated wallcharger (and probably also usb host charger) does not working.
g_nokiashould be OK.I had that loaded (was running from root over USB at the moment.)
Quoted 5 lines
Try also compiling kernel with
CONFIG_USB_GADGET_VBUS_DRAW=500Also for charger autodetection you need to have loaded isp1704_charer.ko module (or compiled into kernel).
Quoted 6 lines
Quoted 3 lines
And make sure that
isp1704_chargeris loaded before modulebq2415x_charger(there is some probe defer, no idea if it works as excepted).It seems
bq2415x_chargeris the problem: it all started working when I did echo reset > mode...
It does not switch from "Full" to "Charging", and it does not seem to switch from "Charging" to "Full", either...:
root at n900:/my/tui/ofone# ./tefone
Ready.
Battery 4.152 V 4.161 V 95 % 0 % 0 / 0 / 2056 mAh Charging 40.876 / 650 / 500 mA Battery 4.152 V 4.161 V 95 % 0 % 0 / 0 / 2056 mAh Charging 48.195 / 650 / 500 mA Battery 4.152 V 4.164 V 95 % 0 % 0 / 0 / 2056 mAh Charging 43.554 / 650 / 500 mA Battery 4.14 V 4.164 V 94 % 0 % 0 / 0 / 2056 mAh Charging 40.162 / 650 / 500 mA Battery 4.158 V 4.172 V 95 % 0 % 0 / 0 / 2056 mAh Charging 54.621 / 650 / 500 mA Battery 4.158 V 4.175 V 95 % 0 % 0 / 0 / 2056 mAh Charging 33.736 / 650 / 500 mA aHello, world Battery 4.164 V 4.175 V 96 % 0 % 0 / 0 / 2056 mAh Charging 2.142 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 19.992 / 650 / 500 mA Battery 4.158 V 4.177 V 95 % 0 % 0 / 0 / 2056 mAh Charging 18.207 / 650 / 500 mA Battery 4.158 V 4.177 V 95 % 0 % 0 / 0 / 2056 mAh Charging 17.493 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 16.243 / 650 / 500 mA Battery 4.158 V 4.177 V 95 % 0 % 0 / 0 / 2056 mAh Charging 16.243 / 650 / 500 mA
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 26 lines · Pavel Machek
Hi!
I connected N900 with full battery using USB. For some reason, charge limit was set to 100mA, battery was "full" and was discharging:
root at n900:/my/tui/ofone# ./tefone
Ready.
Battery 4.017 V 4.039 V 81 % 0 % 0 / 0 / 2056 mAh Full -242.224 / 550 / 100 mAI adjusted the current limit, but got no change, battery is still discharging, fast:
root at n900:/my/tui/ofone# echo 500 >
/sys/class/power_supply/bq24150a-0/current_limitroot at n900:/my/tui/ofone# ./tefone
Ready.Battery 3.994 V 4.034 V 78 % 0 % 0 / 0 / 2056 mAh Full -251.506 / 550 / 500 mA Battery 4.0 V 4.037 V 79 % 0 % 0 / 0 / 2056 mAh Full -223.125 / 550 / 500 mA Battery 4.005 V 4.037 V 79 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 3.994 V 4.037 V 78 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 4.023 V 4.037 V 81 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 4.011 V 4.037 V 80 % 0 % 0 / 0 / 2056 mAh Full -224.91 / 550 / 500 mA Battery 3.994 V 4.031 V 78 % 0 % 0 / 0 / 2056 mAh Full -256.504 / 550 / 500 mA Battery 3.994 V 4.029 V 78 % 0 % 0 / 0 / 2056 mAh Full -224.017 / 550 / 500 mA Battery 3.988 V 4.029 V 77 % 0 % 0 / 0 / 2056 mAh Full -224.731 / 550 / 500 mA Battery 4.005 V 4.023 V 79 % 0 % 0 / 0 / 2056 mAh Full -223.66 / 550 / 500 mA
Quoted 8 lines
I'm getting a lot of
[ 208.037719] bq27x00-battery 2-0055: battery is not calibrated! ignoring capacity values [ 238.038024] bq27x00-battery 2-0055: battery is not calibrated! ignoring capacity valuesmessages, that's why all the 0s in battery information dump.
Any ideas?
Reset kicked the charger back into the charging mode:
root at n900:/sys/class/power_supply/bq24150a-0# echo reset > mode root at n900:/sys/class/power_supply/bq24150a-0# cat mode auto (host)
root at n900:/sys/class/power_supply/bq24150a-0#
Battery 4.017 V 4.037 V 81 % 0 % 0 / 0 / 2056 mAh Charging -109.42 / 650 / 500 mA Battery 4.017 V 4.039 V 81 % 0 % 0 / 0 / 2056 mAh Charging -103.173 / 650 / 500 mA
...and discharge current reduced. I tried adjusting current limit, but it still discharges at 100mA (with screen on).
USB extension cable was probably part of a problem. It works better with n900 plugged in directly into the PC.
(But it still will not terminate the charge:
Battery 4.158 V 4.177 V 95 % 0 % 0 / 0 / 2056 mAh Charging 13.03 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 13.03 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 10.888 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 1.249 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 10.353 / 650 / 500 mA Battery 4.158 V 4.177 V 95 % 0 % 0 / 0 / 2056 mAh Charging 9.639 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 10.71 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 7.497 / 650 / 500 mA Battery 4.158 V 4.177 V 95 % 0 % 0 / 0 / 2056 mAh Charging 9.639 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 6.247 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 5.533 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 4.284 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 4.284 / 650 / 500 mA Battery 4.164 V 4.177 V 96 % 0 % 0 / 0 / 2056 mAh Charging 3.927 / 650 / 500 mA
)
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html