n900 audio: any ideas how to get headset speaker to work?
Hi!
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the left or wired headset? Because I suspect that echo cancelation is not going to be simple...
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 7 lines · On Sunday 15 February 2015 11:21:52 Pavel Machek wrote:
Hi!
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the
left or wired headset? Because I suspect that echo
cancelation is not going to be simple...
Pavel
I do not know but maybe this file could help:
There are definitions of alsa channels and settings for different profiles.
Signature · 9 lines
Pali Roh?r pali.rohar at gmail.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150215/ee897062/attachment.sig>
Quoted 9 lines · Pali Roh?r
Quoted 7 lines · On Sunday 15 February 2015 11:21:52 Pavel Machek wrote:
Hi!
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the
left or wired headset? Because I suspect that echo
cancelation is not going to be simple...
Pavel
Quoted 5 lines
I do not know but maybe this file could help:
There are definitions of alsa channels and settings for different profiles.
Thanks... it seems to be what I needed. More code to write...
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 17 lines · On Sunday 15 February 2015 17:20:29 Pavel Machek wrote:
Quoted 16 lines · Pali Roh?r
Quoted 8 lines · On Sunday 15 February 2015 11:21:52 Pavel Machek wrote:
Hi!
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the left or wired headset? Because I suspect that echo cancelation is not going to be simple...
Pavel
I do not know but maybe this file could help:
https://gitorious.org/community-ssu/policy-settings-rx51/sou
rce/dcb6429c12006dc9850cc942b7143358fe3fd330:rx51/etc/alsape d.conf
Quoted 5 lines
Quoted 2 lines
There are definitions of alsa channels and settings for different profiles.
Thanks... it seems to be what I needed. More code to write...
Pavel
Will you create asoundrc file with both speakers for n900?
I would like to see n900 sound setup without pulseaudio...
Signature · 9 lines
Pali Roh?r pali.rohar at gmail.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150215/da5d411f/attachment.sig>
Quoted 16 lines · Pali Roh?r
Quoted 15 lines · On Sunday 15 February 2015 17:20:29 Pavel Machek wrote:
Quoted 14 lines · Pali Roh?r
Quoted 6 lines · On Sunday 15 February 2015 11:21:52 Pavel Machek wrote:
Hi!
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the left or wired headset? Because I suspect that echo cancelation is not going to be simple...
I do not know but maybe this file could help:
https://gitorious.org/community-ssu/policy-settings-rx51/sou
rce/dcb6429c12006dc9850cc942b7143358fe3fd330:rx51/etc/alsape d.conf
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
There are definitions of alsa channels and settings for different profiles.
Thanks... it seems to be what I needed. More code to write...
Will you create asoundrc file with both speakers for n900?
I would like to see n900 sound setup without pulseaudio...
I actually have pulseaudio running (and plan to keep it since Debian has it by default).
It seems mixer names changed a lot between Maemo kernel and 3.19. I have parser for alsaped.conf, but was not able to identify matching mixers.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
2015-02-15 11:21 GMT+01:00 Pavel Machek <[email protected]>:
Quoted 10 lines
Hi!
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the left or wired headset? Because I suspect that echo cancelation is not going to be simple...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi,
in case of direct alsa output (not PA), setup is pretty complex. Headphones referenced as line. All audio outputs are differential. Here are controls that affects volumes...
global:
PCM (volume)
left/right DAC mux (below)
-- DAC_L1/R1 passes sound to loudspeakers, line, (maybe others) -- DAC_L2/R2 passes sound to loudspeakers, NOT line, (maybe others) -- DAC_L3/R3 passes sound to NOT loudspeakers, line, (maybe others) if DAC_L1/R1 is chosen, you can hear lower volume on both
outputs in compare to dedicated outputs (DAC_L2/R2, DAC_L3/R3), probabbly due to higher load of ADC
loudspeakers:
Speaker function (on)
HP (unmute)
HP DAC (volume)
left HP Mixer DACL1 (below)
right HP Mixer DACR1 (below)
--unmute theese two, this will pass left channel sound to left
channel output and vice versa
left HP Mixer DACR1 (below)
right HP Mixer DACL1 (below)
--mute these two, this controls channel crosstalk ( amount of left
channel sound going to right channel output and vice versa)
line:
line (unmute)
line DAC (volume)
jack function (headphone)
TPA6130A2 Headphone (volume)
left Line Mixer DACL1 (below)
right Line Mixer DACR1 (below)
--unmute theese two, this will pass left channel sound to left
channel output and vice versa
left Line Mixer DACR1 (below)
right Line Mixer DACL1 (below)
--mute these two, this controls channel crosstalk ( amount of left
channel sound going to right channel output and vice versa)
Ahoj!
Quoted 9 lines
Quoted 8 lines
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the left or wired headset? Because I suspect that echo cancelation is not going to be simple...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 4 lines
Hi,
in case of direct alsa output (not PA), setup is pretty complex. Headphones referenced as line. All audio outputs are differential. Here are controls that affects volumes...
Aha, thanks for nice explanation. Now it starts to make sense... I got headset connected to 3.5" jack to work.
Now, I guess I'd like the internal speaker on the left to work, too... Aha, so n900 has two stereo "loud" speakers on the keyboard part, plus extra speaker on the left display part for communication?
I got the two stereo ones to work now.
Any idea what is the last speaker on display is called? HPCOM? Mono?
Quoted 24 lines
global:
PCM (volume)
left/right DAC mux (below)
-- DAC_L1/R1 passes sound to loudspeakers, line, (maybe others) -- DAC_L2/R2 passes sound to loudspeakers, NOT line, (maybe others) -- DAC_L3/R3 passes sound to NOT loudspeakers, line, (maybe others) if DAC_L1/R1 is chosen, you can hear lower volume on both
outputs in compare to dedicated outputs (DAC_L2/R2, DAC_L3/R3), probabbly due to higher load of ADCloudspeakers:
Speaker function (on)
HP (unmute)
HP DAC (volume)
left HP Mixer DACL1 (below)
right HP Mixer DACR1 (below)
--unmute theese two, this will pass left channel sound to left
channel output and vice versa
left HP Mixer DACR1 (below)
right HP Mixer DACL1 (below)
--mute these two, this controls channel crosstalk ( amount of left
channel sound going to right channel output and vice versa)
Quoted 13 lines
line:
line (unmute)
line DAC (volume)
jack function (headphone)
TPA6130A2 Headphone (volume)
left Line Mixer DACL1 (below)
right Line Mixer DACR1 (below)
--unmute theese two, this will pass left channel sound to left
channel output and vice versa
left Line Mixer DACR1 (below)
right Line Mixer DACL1 (below)
--mute these two, this controls channel crosstalk ( amount of left
channel sound going to right channel output and vice versa)
Thanks a lot!
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
2015-02-16 10:57 GMT+01:00 Pavel Machek <[email protected]>:
Quoted 16 lines
Ahoj!
Quoted 9 lines
Quoted 8 lines
By default, output goes to loudspeaker (top right relative to keyboard). Any ideas how to switch it to the speaker on the left or wired headset? Because I suspect that echo cancelation is not going to be simple...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.htmlQuoted 4 lines
Hi,
in case of direct alsa output (not PA), setup is pretty complex. Headphones referenced as line. All audio outputs are differential. Here are controls that affects volumes...
Quoted 7 lines
Aha, thanks for nice explanation. Now it starts to make sense... I got headset connected to 3.5" jack to work.
Now, I guess I'd like the internal speaker on the left to work, too... Aha, so n900 has two stereo "loud" speakers on the keyboard part, plus extra speaker on the left display part for communication?
Yes, exactly.
Quoted 3 lines
I got the two stereo ones to work now.
Any idea what is the last speaker on display is called? HPCOM? Mono?
In schematics, earphone is connected to Left HP, channel B (loudspeakers are channel A). But even after enabling all its controls, earphone stays muted. My N900 may have broken flex causing my touchscreen problems too. Better try it yourself.
Quoted 43 lines
Quoted 24 lines
global:
PCM (volume)
left/right DAC mux (below)
-- DAC_L1/R1 passes sound to loudspeakers, line, (maybe others) -- DAC_L2/R2 passes sound to loudspeakers, NOT line, (maybe others) -- DAC_L3/R3 passes sound to NOT loudspeakers, line, (maybe others) if DAC_L1/R1 is chosen, you can hear lower volume on both
outputs in compare to dedicated outputs (DAC_L2/R2, DAC_L3/R3), probabbly due to higher load of ADCloudspeakers:
Speaker function (on)
HP (unmute)
HP DAC (volume)
left HP Mixer DACL1 (below)
right HP Mixer DACR1 (below)
--unmute theese two, this will pass left channel sound to left
channel output and vice versa
left HP Mixer DACR1 (below)
right HP Mixer DACL1 (below)
--mute these two, this controls channel crosstalk ( amount of left
channel sound going to right channel output and vice versa)Quoted 13 lines
line:
line (unmute)
line DAC (volume)
jack function (headphone)
TPA6130A2 Headphone (volume)
left Line Mixer DACL1 (below)
right Line Mixer DACR1 (below)
--unmute theese two, this will pass left channel sound to left
channel output and vice versa
left Line Mixer DACR1 (below)
right Line Mixer DACL1 (below)
--mute these two, this controls channel crosstalk ( amount of left
channel sound going to right channel output and vice versa)Thanks a lot!
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html