Skip to contentSkip to conversation

rtl8192cu: unreliable connection

DISCUSSION Philipp Matthias Hahn 1 participant 1 message Feb 20, 2015

lore
Share & tools
lore
#0 lore raw

Hello,

I have an rtl8192cu based USB WLAN dongle from D-Link, which works very unreliable for me.
It is not directly recognized by my 3.18.7 linux kernel and I currently have

Quoted 3 lines
# cat /etc/modprobe.d/wlan-pmhahn.conf 
install rtl8192cu /sbin/modprobe --ignore-install rtl8192cu $CMDLINE_OPTS ; echo "2001 330D" >/sys/bus/usb/drivers/rtl8192cu/new_id
options rtl8192cu swenc=1

I'm able to transmit some data, but normally after some time opening new TCP connections (especially SSL/TLS encrypted ones) fail. Ping on the other hand does not show any significant problems:

Quoted 2 lines

953 packets transmitted, 950 received, 0% packet loss, time 953130ms rtt min/avg/max/mdev = 43.433/75.560/457.843/34.281 ms

dmesg shows this repeating pattern:

Quoted 77 lines
[  132.185612] rtl8192cu: MAC auto ON okay!
[  132.218366] rtl8192cu: Tx queue select: 0x05
[  133.583883] wlan0: authenticate with c0:25:06:ac:54:90
[  133.599402] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
[  133.620267] wlan0: authenticated
[  133.621021] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
[  133.625534] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
[  133.625559] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
[  133.625565] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[  133.626745] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[  133.626751] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[  133.626769] wlan0: associated
[ 2553.461180] wlan0: deauthenticating from c0:25:06:ac:54:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2553.461737] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2553.476041] cfg80211: Calling CRDA to update world regulatory domain
[ 2553.484929] cfg80211: World regulatory domain updated:
[ 2553.484932] cfg80211:  DFS Master region: unset
[ 2553.484933] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2553.484935] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2553.484937] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2553.484939] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2553.484942] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2553.484944] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2553.484946] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2553.484948] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2553.484950] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2562.569359] wlan0: authenticate with c0:25:06:ac:54:90
[ 2562.584177] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
[ 2562.593924] wlan0: authenticated
[ 2562.595018] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
[ 2562.623431] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
[ 2562.623459] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
[ 2562.623468] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2562.625029] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2562.625034] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2562.625053] wlan0: associated
[ 2566.667513] wlan0: deauthenticated from c0:25:06:ac:54:90 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 2566.672628] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2566.689055] cfg80211: Calling CRDA to update world regulatory domain
[ 2566.692128] cfg80211: World regulatory domain updated:
[ 2566.692131] cfg80211:  DFS Master region: unset
[ 2566.692132] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2566.692135] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2566.692137] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2566.692139] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2566.692141] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2566.692143] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2566.692145] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2566.692147] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2566.692149] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2567.566395] wlan0: authenticate with c0:25:06:ac:54:90
[ 2567.591386] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
[ 2567.629133] wlan0: authenticated
[ 2567.630070] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
[ 2567.660368] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
[ 2567.660387] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2567.660404] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
[ 2567.660406] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2567.661988] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2567.661994] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2567.662024] wlan0: associated
[ 2572.908712] wlan0: deauthenticated from c0:25:06:ac:54:90 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 2572.913573] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2572.930075] cfg80211: Calling CRDA to update world regulatory domain
[ 2572.932805] cfg80211: World regulatory domain updated:
[ 2572.932807] cfg80211:  DFS Master region: unset
[ 2572.932809] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2572.932811] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2572.932813] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2572.932815] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2572.932817] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2572.932820] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2572.932822] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2572.932824] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2572.932826] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2573.807378] wlan0: authenticate with c0:25:06:ac:54:90
[ 2573.832330] wlan0: send auth to c0:25:06:ac:54:90 (try 1/3)
Quoted 8 lines
[ 2573.835813] wlan0: authenticated
[ 2573.836045] wlan0: associate with c0:25:06:ac:54:90 (try 1/3)
[ 2573.862830] wlan0: RX AssocResp from c0:25:06:ac:54:90 (capab=0x431 status=0 aid=3)
[ 2573.862857] rtl8192cu:rtl92cu_set_hw_reg():<0-0> switch case not processed
[ 2573.862865] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2573.863933] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2573.863938] rtl8192c_common:rtl92c_fill_h2c_cmd(): return H2C cmd because of Fw download fail!!!
[ 2573.863955] wlan0: associated
# lsusb  -s 1:13 -v
Quoted 80 lines

Bus 001 Device 013: ID 2001:330d D-Link Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x2001 D-Link Corp.
  idProduct          0x330d 
  bcdDevice            2.00
  iManufacturer           1 Realtek
  iProduct                2 802.11n WLAN Adapter
  iSerial                 3 00e04c000001
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

Quoted 7 lines
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Any helpful ideas?

Thanks in advance.

Philipp

Signature · 3 lines
  / /  (_)__  __ ____  __ Philipp Hahn
 / /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ [email protected]