rpi_2 builds fine with make, fails with buildman
Hello,
Can anyone confirm that on current u-boot/master, rpi_2 build fine with
git clean -xfd; make rpi_2_defconfig; make
but fails with
tools/buildman/buildman rpi_2
with the following error:
Review
Quoted 5 lines
arm: + rpi_2(quoted diff) +4
-0+make[3]: *** No rule to make target 'arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed by 'arch/arm/cpu/armv7/bcm2835/built-in.o'. Stop. +make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2 +make[1]: *** [arch/arm/cpu/armv7] Error 2 +make: *** [sub-make] Error 2
My gut feeling is that the problem lies with the fact that arch/arm/cpu/armv7/bcm2835/ contains a Makefile which refers to init.o, reset.o, timer.o and mbox.o but the source code for these resides in another directory, arch/arm/cpu/arm1176/bcm2835/.
CC:ing Stephen as directory arch/arm/cpu/armv7/bcm2835/ was introduced by his commit db75356f (committed by Tom, also cc:) and Simon, since the issue is related to buildman.
Amicalement,
Signature · 1 line
Albert.
Quoted 23 lines · Albert ARIBAUD
Hello,
Can anyone confirm that on current u-boot/master,
rpi_2build fine withgit clean -xfd; make
rpi_2_defconfig; makebut fails with
tools/buildman/buildmanrpi_2with the following error:
Review
Quoted 5 lines
arm: + rpi_2(quoted diff) +4
-0+make[3]: *** No rule to make target 'arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed by 'arch/arm/cpu/armv7/bcm2835/built-in.o'. Stop. +make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2 +make[1]: *** [arch/arm/cpu/armv7] Error 2 +make: *** [sub-make] Error 2My gut feeling is that the problem lies with the fact that
arch/arm/cpu/armv7/bcm2835/contains aMakefilewhich refers to init.o, reset.o, timer.o and mbox.o but the source code for these resides in another directory,arch/arm/cpu/arm1176/bcm2835/.
Quoted 3 lines
CC:ing Stephen as directory
arch/arm/cpu/armv7/bcm2835/was introduced by his commitdb75356f(committed by Tom, also cc:) and Simon, since the issue is related to buildman.
This problem exists with quite a few boards, including the rpi port before the addition of rpi_2 support. It's a bit intermittent which may be why you didn't notice before.
See the following, and replies:
http://lists.denx.de/pipermail/u-boot/2015-February/205255.html
Hello Stephen,
Quoted 28 lines · Stephen Warren
Quoted 23 lines · Albert ARIBAUD
Hello,
Can anyone confirm that on current u-boot/master,
rpi_2build fine withgit clean -xfd; make
rpi_2_defconfig; makebut fails with
tools/buildman/buildmanrpi_2with the following error:
Review
Quoted 5 lines
arm: + rpi_2(quoted diff) +4
-0+make[3]: *** No rule to make target 'arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed by 'arch/arm/cpu/armv7/bcm2835/built-in.o'. Stop. +make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2 +make[1]: *** [arch/arm/cpu/armv7] Error 2 +make: *** [sub-make] Error 2My gut feeling is that the problem lies with the fact that
arch/arm/cpu/armv7/bcm2835/contains aMakefilewhich refers to init.o, reset.o, timer.o and mbox.o but the source code for these resides in another directory,arch/arm/cpu/arm1176/bcm2835/.Quoted 3 lines
CC:ing Stephen as directory
arch/arm/cpu/armv7/bcm2835/was introduced by his commitdb75356f(committed by Tom, also cc:) and Simon, since the issue is related to buildman.
Quoted 6 lines
This problem exists with quite a few boards, including the rpi port before the addition of
rpi_2support. It's a bit intermittent which may be why you didn't notice before.See the following, and replies:
http://lists.denx.de/pipermail/u-boot/2015-February/205255.html
Thanks. Indeed it hadn't bitten me so far.
Amicalement,
Signature · 1 line
Albert.