ldconfig - unknown machine 40
Thomas,
Quoted 10 lines · Thomas Petazzoni
Dear Matthias 'muh' Pauligk,
Quoted 4 lines · Matthias 'muh' Pauligk
I faced the same problem using buildroot's toolchain.
The ld-config is present in the host directory, but theMakefileis looking at the wrong path.
So I made a small patch to fix this issue, which is working fine for me:
Quoted 7 lines
The problem is unfortunately not that simple: yes you have a ldconfig for glibc toolchains. But not for uClibc based toolchains.
Best regards,
Thomas
... sorry for dredging up an old thread; however, I was wondering if you would mind commenting more on ldconfig for glibc toolchains. Should a host ldconfig be build for Buildroot built glibc toolchains?
I built a glibc 2.20 arm-buildroot-linux-gnueabihf toolchain from Buildroot 2015.05-git-00331-gcef6a78 and I don't have an arm-buildroot-linux-gnueabihf-ldconfig. Thus, when the build gets to the finalizing target directory stage, I observe the 'ldconfig - unknown machine 40' message.
:
:
# Mandatory configuration file and auxilliary cache directory
# for recent versions of ldconfig
touch /home/dkehn/devel/buildroot/output/target/etc/ld.so.conf
mkdir -p
/home/dkehn/devel/buildroot/output/target/var/cache/ldconfig
if [ -x
"/home/dkehn/devel/buildroot/output/host/usr/bin/arm-buildroot-linux-gnueabihf-ldconfig"
]; \
then \
/home/dkehn/devel/buildroot/output/host/usr/bin/arm-buildroot-linux-gnueabihf-ldconfig
-r /home/dkehn/devel/buildroot/output/target; \
else \
/sbin/ldconfig -r /home/dkehn/devel/buildroot/output/target;
\
fi
/sbin/ldconfig:
/usr/lib/libglibmm_generate_extra_defs-2.4.so.1 is for
unknown machine 40. /sbin/ldconfig: /usr/lib/libxslt.so.1.1.28 is for unknown
machine 40.
:
:I thought arm-buildroot-linux-gnueabihf-ldconfig would be present.
Thanks and Regards,
..doug