drm/i915: Add missing MacBook Pro models with dual channel LVDS
Subsystems (2)
PATCH 1/1 drm/i915: Add missing MacBook Pro models with dual channel LVDS
Single channel LVDS maxes out at 112 MHz. All 17" models with i915 graphics had a resolution of 1920x1200 (193 MHz), necessitating dual channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz) or 1680x1050 (119 MHz), both versions used dual channel LVDS even though the smaller one would have fit into a single channel.
--- drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_lvds.c +24 -2
@@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident ="Apple MacBook Pro (Core i5/i7 Series)" , + .ident ="Apple MacBook Pro 15\" (2010)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro6,2" ), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2011)" , .matches = {DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ),DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro8,2" ), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2012)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro9,1" ), + }, + }, { }/* terminating entry */ };
@@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)if (i915.lvds_channel_mode >0 )return i915.lvds_channel_mode ==2 ; +/* single channel LVDS is limited to 112 kHz */ +if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + >112999 ) +return true; +if (dmi_check_system (intel_dual_link_lvds))return true;
@@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev) out:mutex_unlock (&dev->mode_config.mutex); +intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link =compute_is_dual_link_lvds (lvds_encoder);DRM_DEBUG_KMS ("detected %s-link lvds configuration\n" , lvds_encoder->is_dual_link ?"dual" :"single" );
@@ -1118,7 +1141,6 @@ out: }drm_connector_register (connector); -intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode);intel_panel_setup_backlight (connector,INVALID_PIPE );return ;
Signature · 6 lines
1.8.5.2 (Apple Git-48) _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Lukas Wunner
Single channel LVDS maxes out at 112 MHz. All 17" models with i915 graphics had a resolution of 1920x1200 (193 MHz), necessitating dual channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz) or 1680x1050 (119 MHz), both versions used dual channel LVDS even though the smaller one would have fit into a single channel.
Signed-off-by Lukas Wunner <[email protected]>Tested-by Lukas Wunner <[email protected]>
Quoted 74 lines
--- drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_lvds.c +24
-2@@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident ="Apple MacBook Pro (Core i5/i7 Series)" , + .ident ="Apple MacBook Pro 15\" (2010)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro6,2" ), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2011)" , .matches = {DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ),DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro8,2" ), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2012)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro9,1" ), + }, + }, { }/* terminating entry */ };@@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)if (i915.lvds_channel_mode >0 )return i915.lvds_channel_mode ==2 ; +/* single channel LVDS is limited to 112 kHz */ +if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + >112999 ) +return true; +if (dmi_check_system (intel_dual_link_lvds))return true;@@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev) out:mutex_unlock (&dev->mode_config.mutex); +intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link =compute_is_dual_link_lvds (lvds_encoder);DRM_DEBUG_KMS ("detected %s-link lvds configuration\n" , lvds_encoder->is_dual_link ?"dual" :"single" );@@ -1118,7 +1141,6 @@ out: }drm_connector_register (connector); -intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode);intel_panel_setup_backlight (connector,INVALID_PIPE );return ;Signature · 6 lines
1.8.5.2 (Apple Git-48) _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Joonas Lahtinen
maintainerQuoted 50 lines · Jani Nikula
Quoted 8 lines · Lukas Wunner
Single channel LVDS maxes out at 112 MHz. All 17" models with i915 graphics had a resolution of 1920x1200 (193 MHz), necessitating dual channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz) or 1680x1050 (119 MHz), both versions used dual channel LVDS even though the smaller one would have fit into a single channel.
Signed-off-by Lukas Wunner <[email protected]>Tested-by Lukas Wunner <[email protected]>Acked-by Jani Nikula <[email protected]>Quoted 38 lines
--- drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_lvds.c +17
-1@@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident ="Apple MacBook Pro (Core i5/i7 Series)" , + .ident ="Apple MacBook Pro 15\" (2010)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro6,2" ), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2011)" , .matches = {DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ),DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro8,2" ), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2012)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro9,1" ), + }, + }, { }/* terminating entry */ };
Quoted 5 lines
drivers/gpu/drm/i915/intel_lvds.c static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder) · line 866
Quoted 5 lines
drivers/gpu/drm/i915/intel_lvds.c +1
-0@@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)if (i915.lvds_channel_mode >0 )return i915.lvds_channel_mode ==2 ; +/* single channel LVDS is limited to 112 kHz */
s/kHz/MHz/
Quoted 23 lines
Quoted 23 lines
drivers/gpu/drm/i915/intel_lvds.c +6
-1+if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + >112999 ) +return true; +if (dmi_check_system (intel_dual_link_lvds))return true;@@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev) out:mutex_unlock (&dev->mode_config.mutex); +intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link =compute_is_dual_link_lvds (lvds_encoder);DRM_DEBUG_KMS ("detected %s-link lvds configuration\n" , lvds_encoder->is_dual_link ?"dual" :"single" );@@ -1118,7 +1141,6 @@ out: }drm_connector_register (connector); -intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode);intel_panel_setup_backlight (connector,INVALID_PIPE );
Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/i915/intel_lvds.c +0
-0return ;Signature · 6 lines
1.8.5.2 (Apple Git-48) _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Single channel LVDS maxes out at 112 MHz. All 17" models with i915 graphics had a resolution of 1920x1200 (193 MHz), necessitating dual channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz) or 1680x1050 (119 MHz), both versions used dual channel LVDS even though the smaller one would have fit into a single channel.
v2: Assume dual channel LVDS if the pixel clock necessitates it, eliminating the need to hardcode 17" models, suggested by Jani Nikula.
v3: Fix typo, thanks Joonas Lahtinen.
--- drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_lvds.c +24 -2
@@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident ="Apple MacBook Pro (Core i5/i7 Series)" , + .ident ="Apple MacBook Pro 15\" (2010)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro6,2" ), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2011)" , .matches = {DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ),DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro8,2" ), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2012)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro9,1" ), + }, + }, { }/* terminating entry */ };
@@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)if (i915.lvds_channel_mode >0 )return i915.lvds_channel_mode ==2 ; +/* single channel LVDS is limited to 112 MHz */ +if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + >112999 ) +return true; +if (dmi_check_system (intel_dual_link_lvds))return true;
@@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev) out:mutex_unlock (&dev->mode_config.mutex); +intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link =compute_is_dual_link_lvds (lvds_encoder);DRM_DEBUG_KMS ("detected %s-link lvds configuration\n" , lvds_encoder->is_dual_link ?"dual" :"single" );
@@ -1118,7 +1141,6 @@ out: }drm_connector_register (connector); -intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode);intel_panel_setup_backlight (connector,INVALID_PIPE );return ;
Signature · 5 lines
1.8.5.2 (Apple Git-48) _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Ville Syrjälä
Reviewed-byQuoted 8 lines · Lukas Wunner
Single channel LVDS maxes out at 112 MHz. All 17" models with i915 graphics had a resolution of 1920x1200 (193 MHz), necessitating dual channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz) or 1680x1050 (119 MHz), both versions used dual channel LVDS even though the smaller one would have fit into a single channel.
v2: Assume dual channel LVDS if the pixel clock necessitates it, eliminating the need to hardcode 17" models, suggested by Jani Nikula.
I would suggest splitting that into a separate patch. Otherwise it's going to harder to revert either change separately, should the need arise. So that part is
I have no clue about the Mac stuff so won't pretend to say anything about that.
Quoted 80 lines
v3: Fix typo, thanks Joonas Lahtinen.
Signed-off-by Lukas Wunner <[email protected]>Tested-by Lukas Wunner <[email protected]>Acked-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_lvds.c +24
-2@@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)static const struct dmi_system_id intel_dual_link_lvds[] = { { .callback = intel_dual_link_lvds_callback, - .ident ="Apple MacBook Pro (Core i5/i7 Series)" , + .ident ="Apple MacBook Pro 15\" (2010)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro6,2" ), + }, + }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2011)" , .matches = {DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ),DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro8,2" ), }, }, + { + .callback = intel_dual_link_lvds_callback, + .ident ="Apple MacBook Pro 15\" (2012)" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Apple Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"MacBookPro9,1" ), + }, + }, { }/* terminating entry */ };@@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)if (i915.lvds_channel_mode >0 )return i915.lvds_channel_mode ==2 ; +/* single channel LVDS is limited to 112 MHz */ +if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock + >112999 ) +return true; +if (dmi_check_system (intel_dual_link_lvds))return true;@@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev) out:mutex_unlock (&dev->mode_config.mutex); +intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode); + lvds_encoder->is_dual_link =compute_is_dual_link_lvds (lvds_encoder);DRM_DEBUG_KMS ("detected %s-link lvds configuration\n" , lvds_encoder->is_dual_link ?"dual" :"single" );@@ -1118,7 +1141,6 @@ out: }drm_connector_register (connector); -intel_panel_init (&intel_connector->panel, fixed_mode, downclock_mode);intel_panel_setup_backlight (connector,INVALID_PIPE );return ;Signature · 5 lines
1.8.5.2 (Apple Git-48) _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Ville,
Quoted 4 lines
I would suggest splitting that into a separate patch. Otherwise it's going to harder to revert either change separately, should the need arise. So that part is
Reviewed-by Ville Syrjälä <[email protected]>
Okay, commit split in two as requested.
Question:
Daniel Vetter hardcoded the MacBookPro8,2 with commit 618563e3945b9d0864154bab3c607865b557cecc, noting:
"Add a dual link lvds quirk for MacBook Pro 8,2 When booting with EFI, Apple botched this one up."
Nouveau recognizes just fine that dual channel LVDS is necessary, it seems to retrieve this information from VBIOS.
On the other hand, when i915 initializes, it logs the following complaint (on a MacBookPro9,1): "[drm] failed to find VBIOS tables".
Would it be possible to somehow point i915 to the correct location where it can find the VBIOS? Or can we somehow copy the VBIOS nouveau is using? I'm wondering, even if we had to hardcode memory locations to do that, wouldn't that make more sense rather than hardcoding the DMI IDs?
Thanks,
Lukas
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Lukas Wunner
Hi Ville,
Quoted 4 lines
I would suggest splitting that into a separate patch. Otherwise it's going to harder to revert either change separately, should the need arise. So that part is
Reviewed-by Ville Syrjälä <[email protected]>Okay, commit split in two as requested.
I'll look into them, thanks.
Quoted 10 lines
Question:
Daniel Vetter hardcoded the MacBookPro8,2 with commit
618563e3945b9d0864154bab3c607865b557cecc, noting:
"Add a dual link lvds quirk for MacBook Pro 8,2 When booting with EFI, Apple botched this one up."Nouveau recognizes just fine that dual channel LVDS is necessary, it seems to retrieve this information from VBIOS.
Quoted 8 lines
On the other hand, when i915 initializes, it logs the following complaint (on a MacBookPro9,1): "[drm] failed to find VBIOS tables".
Would it be possible to somehow point i915 to the correct location where it can find the VBIOS? Or can we somehow copy the VBIOS nouveau is using? I'm wondering, even if we had to hardcode memory locations to do that, wouldn't that make more sense rather than hardcoding the DMI IDs?
These are vendor specific bios tables we're talking about. We couldn't readily use it anyway.
I don't really know, but looks like OS X gets the IGD info from somewhere other than the usual VBT Windows and Linux use, while the nvidia VBIOS is the same also on OS X. *shrug*
BR,
Jani.
Quoted 4 lines
Thanks,
Lukas
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx