Add support for DS28AE00 sequence to w1-therm
Subsystems (2)
PATCH 1/1 Add support for DS28AE00 sequence to w1-therm
This patch provides support for the DS28AE00 digital thermometer.
The DS28AE00 provides an additional two pins for implementing a sequence detection algorithm. This feature allows you to determine the physical location of the chip in the 1-wire bus without needing pre-existing knowledge of the bus ordering. Support is provided through the sysfs w1_seq file. The file will contain a single line with an integer value representing the device index in the bus starting at 0.
Documentation/ABI/stable/sysfs-driver-w1_ds28ae00 new file +6 -0
@@ -0,0 +1,6 @@ +What: /sys/bus/w1/devices/.../w1_seq +Date: Apr 2015 +Contact: Matt Campbell <[email protected]> +Description: Support for the DS28AE00 chain sequence function + see Documentation/w1/slaves/w1_therm for detailed information +Users: any user space application which wants to communicate with DS28AE00
Documentation/w1/slaves/w1_therm +10 -1
@@ -11,12 +11,14 @@ Author: Evgeniy Polyakov <[email protected]> Description ----------- -w1_therm provides basic temperature conversion for ds18*20 devices. +w1_therm provides basic temperature conversion for ds18*20 devices, and the +ds28ae00 device. supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 W1_THERM_DS1825 0x3B +W1_THERM_DS28AE00 0x42 Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two
@@ -48,3 +50,10 @@ resistor). The DS18b20 temperature sensor specification lists a maximum current draw of 1.5mA and that a 5k pullup resistor is not sufficient. The strong pullup is designed to provide the additional current required. + +The DS28AE00 provides an additional two pins for implementing a sequence +detection algorithm. This feature allows you to determine the physical +location of the chip in the 1-wire bus without needing pre-existing +knowledge of the bus ordering. Support is provided through the sysfs +w1_seq file. The file will contain a single line with an integer value +representing the device index in the bus starting at 0.
drivers/w1/slaves/w1_therm.c +101 -1
133 lines not on this page · raw message
Hi everyone
27.04.2015, 16:32, "Matt Campbell" <[email protected]>:
Quoted 1 line
This patch provides support for the DS28AE00 digital thermometer.
Greg, please pull it into you tree, everything looks good to me
Quoted 4 lines · Evgeniy Polyakov
27.04.2015, 16:32, "Matt Campbell" <[email protected]>:
Quoted 1 line
This patch provides support for the DS28AE00 digital thermometer.
Greg, please pull it into you tree, everything looks good to me
Except that the component name seems to be misspelled in all but two places?
http://www.maximintegrated.com/en/pst/run.mvp?q=DS28AE00
SEARCH RESULTS
[empty]
Did you mean: DS28EA00
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds