ixgbe: fix X550 default set_phy_power method
Subsystems (2)
PATCH 1/1 ixgbe: fix X550 default set_phy_power method
Even though X550 may later clear this value for certain devices set it initially to support copper.
Signed-off-by Don Skidmore <[email protected]>
--- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +2 -2
@@ -1,7 +1,7 @@/******************************************************************************* * * Intel 10 Gigabit PCI Express Linux driver -* Copyright(c) 1999 - 2014 Intel Corporation. +* Copyright(c) 1999 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License,
@@ -1855,6 +1855,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = { .read_reg = &ixgbe_read_phy_reg_generic, \ .write_reg = &ixgbe_write_phy_reg_generic, \ .setup_link = &ixgbe_setup_phy_link_generic, \ + .set_phy_power = &ixgbe_set_copper_phy_power, \ .check_overtemp = &ixgbe_tn_check_overtemp, \ .get_firmware_version = &ixgbe_get_phy_firmware_version_generic,
@@ -1864,7 +1865,6 @@ static struct ixgbe_phy_operations phy_ops_X550 = { .identify = &ixgbe_identify_phy_generic, .read_i2c_combined = &ixgbe_read_i2c_combined_generic, .write_i2c_combined = &ixgbe_write_i2c_combined_generic, - .set_phy_power = &ixgbe_set_copper_phy_power, };static struct ixgbe_phy_operations phy_ops_X550EM_x = {