ixgbe: Add SFP+ detection for X550 hardware
Subsystems (2)
PATCH 1/1 ixgbe: Add SFP+ detection for X550 hardware
This patch is part of the future enablement of X550 SFP+ support. This HW uses different SDP so the interrupts need to be set up accordingly.
Signed-off-by Donald C Skidmore <[email protected]>
--- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +9 -3
@@ -4904,9 +4904,15 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)if (adapter->flags &IXGBE_FLAG_FAN_FAIL_CAPABLE ) gpie |=IXGBE_SDP1_GPIEN (hw); -if (hw->mac.type == ixgbe_mac_82599EB) { - gpie |=IXGBE_SDP1_GPIEN_8259X ; - gpie |=IXGBE_SDP2_GPIEN_8259X ; +switch (hw->mac.type) { +case ixgbe_mac_82599EB: + gpie |=IXGBE_SDP1_GPIEN_8259X |IXGBE_SDP2_GPIEN_8259X ; +break ; +case ixgbe_mac_X550EM_x: + gpie |=IXGBE_SDP0_GPIEN_X540 ; +break ; +default : +break ; }IXGBE_WRITE_REG (hw,IXGBE_GPIE , gpie);