Re-use nvram module
Subsystems (10)
RFC v3 1/24 scsi/atari_scsi: Dont select CONFIG_NVRAM
In reply to Finn ThainOn powerpc, setting CONFIG_NVRAM=n builds a kernel with no NVRAM support. Setting CONFIG_NVRAM=m enables the /dev/nvram misc device module without enabling NVRAM support in drivers. Setting CONFIG_NVRAM=y enables the misc device (built-in) and also enables NVRAM support in drivers.
m68k shares the valkyriefb driver with powerpc, and since that driver uses NVRAM, it is affected by CONFIG_ATARI_SCSI, because of the use of "select NVRAM".
Adopt the powerpc convention on m68k to avoid surprises.
---
This patch temporarily disables CONFIG_NVRAM on Atari, to prevent build failures when bisecting the rest of this patch series. It gets enabled again with the introduction of CONFIG_HAVE_ARCH_NVRAM_OPS, once the nvram_* global functions have been moved to an ops struct.
The removal of "select NVRAM" may mean that some kernel configs (such as Debian/m68k) may need tweaking.
--- drivers/char/Kconfig | 5 +---- drivers/scsi/Kconfig | 6 +++--- drivers/scsi/atari_scsi.c | 8 ++++---- 3 files changed, 8 insertions(+), 11 deletions(-)
drivers/char/Kconfig +1 -4
@@ -247,7 +247,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM + depends on X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"),
@@ -265,9 +265,6 @@ config NVRAM should NEVER idly tamper with it. See Ralf Brown's interrupt list for a guide to the use of CMOS bytes by your BIOS. - On Atari machines, /dev/nvram is always configured and does not need - to be selected. - To compile this driver as a module, choose M here: the module will be called nvram.
drivers/scsi/Kconfig +3 -3
@@ -1592,14 +1592,14 @@ config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI select SCSI_SPI_ATTRS - select NVRAM ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have a compatible SCSI controller (e.g. for Medusa). - To compile this driver as a module, choose M here: the - module will be called atari_scsi. + To compile this driver as a module, choose M here: the module will + be called atari_scsi. If you also enable NVRAM support, the SCSI + host's ID is taken from the setting in TT RTC NVRAM. This driver supports both styles of NCR integration into the system: the TT style (separate DMA), and the Falcon style (via
drivers/scsi/atari_scsi.c +4 -4
@@ -875,9 +875,10 @@ static int __init atari_scsi_probe(strucif (ATARIHW_PRESENT (TT_SCSI ) && setup_sg_tablesize >=0 ) atari_scsi_template.sg_tablesize = setup_sg_tablesize; -if (setup_hostid >=0 ) { +if (setup_hostid >=0 ) atari_scsi_template.this_id = setup_hostid &7 ; - }else { +#ifdef CONFIG_NVRAM + else/* Test if a host id is set in the NVRam */ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {unsigned char b =nvram_read_byte (14 );
@@ -888,8 +889,7 @@ static int __init atari_scsi_probe(strucif (b &0x80 ) atari_scsi_template.this_id = b & 7; } - } - +#endif #ifdef REAL_DMA /* If running on a Falcon and if there's TT-Ram (i.e., more than one
RFC v3 3/24 m68k/atari: Replace nvram_{read,write}_byte with arch_nvram_ops
In reply to Finn ThainBy implementing an arch_nvram_ops struct, any platform can re-use the drivers/char/nvram module without needing any arch-specific code in that module. Atari does so here.
Atari has one user of nvram_check_checksum() whereas the other platforms (i.e. x86 and ARM platforms) have none at all. Replace this validate-checksum-and-read-byte sequence with the equivalent rtc_nvram_ops.read() call and remove the now unused functions.
---
The advantage of the new ops struct over the old global nvram_* functions is that the misc device module can be shared by different platforms without requiring every platform to implement every nvram_* function. E.g. only RTC "CMOS" NVRAMs have a checksum and only PowerPC platforms have a "sync" ioctl.
--- arch/m68k/atari/nvram.c | 89 ++++++++++++++++++++++++++++------------------ drivers/scsi/atari_scsi.c | 8 ++-- include/linux/nvram.h | 9 ++++ 3 files changed, 70 insertions(+), 36 deletions(-)
arch/m68k/atari/nvram.c +56 -33
@@ -38,33 +38,12 @@ unsigned char __nvram_read_byte(int i)return CMOS_READ (NVRAM_FIRST_BYTE + i); } -unsigned char nvram_read_byte (int i) -{ -unsigned long flags; -unsigned char c; - -spin_lock_irqsave (&rtc_lock, flags); - c =__nvram_read_byte (i); -spin_unlock_irqrestore (&rtc_lock, flags); -return c; -} -EXPORT_SYMBOL (nvram_read_byte); -/* This races nicely with trying to read with checksum checking */ void __nvram_write_byte (unsigned char c,int i) {CMOS_WRITE (c,NVRAM_FIRST_BYTE + i); } -void nvram_write_byte (unsigned char c,int i) -{ -unsigned long flags; - -spin_lock_irqsave (&rtc_lock, flags); -__nvram_write_byte (c, i); -spin_unlock_irqrestore (&rtc_lock, flags); -} -/* On Ataris, the checksum is over all bytes except the checksum bytes * themselves; these are at the very end. */
@@ -83,18 +62,6 @@ int __nvram_check_checksum(void) (__nvram_read_byte (ATARI_CKS_LOC +1 ) == (sum &0xff )); } -int nvram_check_checksum (void ) -{ -unsigned long flags; -int rv; - -spin_lock_irqsave (&rtc_lock, flags); - rv =__nvram_check_checksum (); -spin_unlock_irqrestore (&rtc_lock, flags); -return rv; -} -EXPORT_SYMBOL (nvram_check_checksum); -static void __nvram_set_checksum (void ) {int i;
@@ -106,6 +73,62 @@ static void __nvram_set_checksum(void)__nvram_write_byte (sum,ATARI_CKS_LOC +1 ); } +static ssize_t nvram_read (char *buf,size_t count,loff_t *ppos) +{ +char *p = buf; +loff_t i; + +spin_lock_irq (&rtc_lock); + +if (!__nvram_check_checksum ()) { +spin_unlock_irq (&rtc_lock); +return -EIO ; + } + +for (i = *ppos; count >0 && i <NVRAM_BYTES ; --count, ++i, ++p) + *p =__nvram_read_byte (i); + +spin_unlock_irq (&rtc_lock); + + *ppos = i; +return p - buf; +} + +static ssize_t nvram_write (char *buf,size_t count,loff_t *ppos) +{ +char *p = buf; +loff_t i; + +spin_lock_irq (&rtc_lock); + +if (!__nvram_check_checksum ()) { +spin_unlock_irq (&rtc_lock); +return -EIO ; + } + +for (i = *ppos; count >0 && i <NVRAM_BYTES ; --count, ++i, ++p) +__nvram_write_byte (*p, i); + +__nvram_set_checksum (); + +spin_unlock_irq (&rtc_lock); + + *ppos = i; +return p - buf; +} + +static ssize_t nvram_get_size (void ) +{ +return NVRAM_BYTES ; +} + +const struct nvram_ops arch_nvram_ops = { + .read = nvram_read, + .write = nvram_write, + .get_size = nvram_get_size, +}; +EXPORT_SYMBOL (arch_nvram_ops); + #ifdef CONFIG_PROC_FS static struct { unsigned char val;
drivers/scsi/atari_scsi.c +5 -3
@@ -880,13 +880,15 @@ static int __init atari_scsi_probe(struc#ifdef CONFIG_NVRAM else/* Test if a host id is set in the NVRam */ - if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) { -unsigned char b =nvram_read_byte (14 ); + if (ATARIHW_PRESENT(TT_CLK)) { +unsigned char b; +loff_t offset =14 ; +ssize_t count = arch_nvram_ops.read (&b,1 , &offset);/* Arbitration enabled? (for TOS) * If yes, use configured host ID */ -if (b &0x80 ) +if ((count ==1 ) && (b &0x80 )) atari_scsi_template.this_id = b &7 ; }#endif
include/linux/nvram.h +9 -0
@@ -10,4 +10,13 @@ extern void __nvram_write_byte(unsignedextern void nvram_write_byte (unsigned char c,int i);extern int __nvram_check_checksum (void );extern int nvram_check_checksum (void ); + +struct nvram_ops { +ssize_t (*read)(char *,size_t ,loff_t *); +ssize_t (*write)(char *,size_t ,loff_t *); +ssize_t (*get_size)(void ); +}; + +extern const struct nvram_ops arch_nvram_ops; +#endif /* _LINUX_NVRAM_H */
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
RFC v3 6/24 x86/thinkpad_acpi: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_write_byte()
In reply to Finn ThainMake use of arch_nvram_ops in the thinkpad_acpi driver so that the nvram_* function exports can be removed.
This patch series was tested on a ThinkPad T43.
--- drivers/platform/x86/thinkpad_acpi.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/platform/x86/thinkpad_acpi.c +10 -10
@@ -2311,30 +2311,30 @@ static void hotkey_read_nvram(struct tp_u8 d;if (m &TP_NVRAM_HKEY_GROUP_HK2 ) { - d =nvram_read_byte (TP_NVRAM_ADDR_HK2 ); + d = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_HK2 ); n->thinkpad_toggle = !!(d &TP_NVRAM_MASK_HKT_THINKPAD ); n->zoom_toggle = !!(d &TP_NVRAM_MASK_HKT_ZOOM ); n->display_toggle = !!(d &TP_NVRAM_MASK_HKT_DISPLAY ); n->hibernate_toggle = !!(d &TP_NVRAM_MASK_HKT_HIBERNATE ); }if (m &TP_ACPI_HKEY_THNKLGHT_MASK ) { - d =nvram_read_byte (TP_NVRAM_ADDR_THINKLIGHT ); + d = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_THINKLIGHT ); n->thinklight_toggle = !!(d &TP_NVRAM_MASK_THINKLIGHT ); }if (m &TP_ACPI_HKEY_DISPXPAND_MASK ) { - d =nvram_read_byte (TP_NVRAM_ADDR_VIDEO ); + d = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_VIDEO ); n->displayexp_toggle = !!(d &TP_NVRAM_MASK_HKT_DISPEXPND ); }if (m &TP_NVRAM_HKEY_GROUP_BRIGHTNESS ) { - d =nvram_read_byte (TP_NVRAM_ADDR_BRIGHTNESS ); + d = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_BRIGHTNESS ); n->brightness_level = (d &TP_NVRAM_MASK_LEVEL_BRIGHTNESS ) >>TP_NVRAM_POS_LEVEL_BRIGHTNESS ; n->brightness_toggle = !!(d &TP_NVRAM_MASK_HKT_BRIGHTNESS ); }if (m &TP_NVRAM_HKEY_GROUP_VOLUME ) { - d =nvram_read_byte (TP_NVRAM_ADDR_MIXER ); + d = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_MIXER ); n->volume_level = (d &TP_NVRAM_MASK_LEVEL_VOLUME ) >>TP_NVRAM_POS_LEVEL_VOLUME ; n->mute = !!(d &TP_NVRAM_MASK_MUTE );
@@ -6155,7 +6155,7 @@ static unsigned int tpacpi_brightness_nv {u8 lnvram; - lnvram = (nvram_read_byte (TP_NVRAM_ADDR_BRIGHTNESS ) + lnvram = (arch_nvram_ops.read_byte (TP_NVRAM_ADDR_BRIGHTNESS ) &TP_NVRAM_MASK_LEVEL_BRIGHTNESS ) >>TP_NVRAM_POS_LEVEL_BRIGHTNESS ; lnvram &= bright_maxlvl;
@@ -6180,7 +6180,7 @@ static void tpacpi_brightness_checkpointif (unlikely (!acpi_ec_read (TP_EC_BACKLIGHT , &lec))) goto unlock; lec &=TP_EC_BACKLIGHT_LVLMSK ; - b_nvram =nvram_read_byte (TP_NVRAM_ADDR_BRIGHTNESS ); + b_nvram = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_BRIGHTNESS );if (lec != ((b_nvram &TP_NVRAM_MASK_LEVEL_BRIGHTNESS ) >>TP_NVRAM_POS_LEVEL_BRIGHTNESS )) {
@@ -6188,7 +6188,7 @@ static void tpacpi_brightness_checkpoint b_nvram &= ~(TP_NVRAM_MASK_LEVEL_BRIGHTNESS <<TP_NVRAM_POS_LEVEL_BRIGHTNESS ); b_nvram |= lec; -nvram_write_byte (b_nvram,TP_NVRAM_ADDR_BRIGHTNESS ); + arch_nvram_ops.write_byte (b_nvram,TP_NVRAM_ADDR_BRIGHTNESS );dbg_printk (TPACPI_DBG_BRGHT ,"updated NVRAM backlight level to %u (0x%02x)\n" , (unsigned int ) lec, (unsigned int ) b_nvram);
@@ -6796,13 +6796,13 @@ static void tpacpi_volume_checkpoint_nvrif (unlikely (!acpi_ec_read (TP_EC_AUDIO , &lec))) goto unlock; lec &= ec_mask; - b_nvram =nvram_read_byte (TP_NVRAM_ADDR_MIXER ); + b_nvram = arch_nvram_ops.read_byte (TP_NVRAM_ADDR_MIXER );if (lec != (b_nvram & ec_mask)) {/* NVRAM needs update */ b_nvram &= ~ec_mask; b_nvram |= lec; -nvram_write_byte (b_nvram,TP_NVRAM_ADDR_MIXER ); + arch_nvram_ops.write_byte (b_nvram,TP_NVRAM_ADDR_MIXER );dbg_printk (TPACPI_DBG_MIXER ,"updated NVRAM mixer status to 0x%02x (0x%02x)\n" , (unsigned int ) lec, (unsigned int ) b_nvram);
RFC v3 12/24 powerpc: Cleanup nvram includes
In reply to Finn ThainThe nvram_read_byte() and nvram_write_byte() definitions in asm/nvram.h duplicate those in linux/nvram.h. Get rid of the former to prepare for adoption of struct arch_nvram_ops (which is defined in linux/nvram.h for general use).
--- arch/powerpc/include/asm/nvram.h | 3 --- arch/powerpc/kernel/setup_32.c | 1 + drivers/char/generic_nvram.c | 4 +++- drivers/video/fbdev/matrox/matroxfb_base.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)
Index: linux/arch/powerpc/include/asm/nvram.h
=================================--- linux.orig/arch/powerpc/include/asm/nvram.h 2015-06-28 11:41:27.000000000 +1000
+++ linux/arch/powerpc/include/asm/nvram.h 2015-06-28 11:41:41.000000000 +1000
@@ -101,7 +101,4 @@ extern int nvram_write_os_partition(stru
/* Determine NVRAM size */
extern ssize_t nvram_get_size(void);
-/* Normal access to NVRAM */
-extern unsigned char nvram_read_byte(int i); -extern void nvram_write_byte(unsigned char c, int i);
#endif /* _ASM_POWERPC_NVRAM_H */
Index: linux/arch/powerpc/kernel/setup_32.c
=================================--- linux.orig/arch/powerpc/kernel/setup_32.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/arch/powerpc/kernel/setup_32.c 2015-06-28 11:41:41.000000000 +1000
@@ -16,6 +16,7 @@
#include <linux/cpu.h>
#include <linux/console.h>
#include <linux/memblock.h>
+#include <linux/nvram.h>
#include <asm/io.h>
#include <asm/prom.h>
Index: linux/drivers/char/generic_nvram.c
=================================--- linux.orig/drivers/char/generic_nvram.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/drivers/char/generic_nvram.c 2015-06-28 11:41:41.000000000 +1000
@@ -20,9 +20,11 @@
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/nvram.h>
#include <asm/uaccess.h>
-#include <asm/nvram.h>
+
#ifdef CONFIG_PPC_PMAC
+#include <asm/nvram.h>
#include <asm/machdep.h>
#endif
Index: linux/drivers/video/fbdev/matrox/matroxfb_base.c
=================================--- linux.orig/drivers/video/fbdev/matrox/matroxfb_base.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/drivers/video/fbdev/matrox/matroxfb_base.c 2015-06-28 11:41:41.000000000 +1000
@@ -111,12 +111,12 @@
#include "matroxfb_g450.h"
#include <linux/matroxfb.h>
#include <linux/interrupt.h>
+#include <linux/nvram.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
-unsigned char nvram_read_byte(int);
static int default_vmode = VMODE_NVRAM;
static int default_cmode = CMODE_NVRAM;
#endif
RFC v3 14/24 powerpc: Implement arch_nvram_ops.get_size() and remove old nvram_* exports
In reply to Finn ThainImplement arch_nvram_ops for PPC32 and make use of it in the generic_nvram misc device module so that the nvram_* function exports can be removed.
--- arch/powerpc/include/asm/nvram.h | 3 --- arch/powerpc/kernel/setup_32.c | 10 +++++++--- drivers/char/generic_nvram.c | 24 ++++++++++++------------ 3 files changed, 19 insertions(+), 18 deletions(-)
arch/powerpc/include/asm/nvram.h +0 -3
@@ -98,7 +98,4 @@ extern int nvram_write_os_partition(struunsigned int err_type, unsigned int error_log_cnt); -/* Determine NVRAM size */ -extern ssize_t nvram_get_size (void ); -#endif /* _ASM_POWERPC_NVRAM_H */
arch/powerpc/kernel/setup_32.c +7 -3
@@ -186,13 +186,12 @@ void nvram_write_byte(unsigned char val, }EXPORT_SYMBOL (nvram_write_byte); -ssize_t nvram_get_size (void ) +static ssize_t ppc_nvram_get_size (void ) {if (ppc_md.nvram_size)return ppc_md.nvram_size (); -return -1 ; +return -ENODEV ; } -EXPORT_SYMBOL (nvram_get_size);void nvram_sync (void ) {
@@ -201,6 +200,11 @@ void nvram_sync(void) }EXPORT_SYMBOL (nvram_sync); +const struct nvram_ops arch_nvram_ops = { + .get_size = ppc_nvram_get_size, +}; +EXPORT_SYMBOL (arch_nvram_ops); +#endif /* CONFIG_NVRAM */ int __init ppc_init (void )
drivers/char/generic_nvram.c +12 -12
@@ -28,8 +28,6 @@#include <asm/machdep.h> #endif -#define NVRAM_SIZE 8192 -static DEFINE_MUTEX (nvram_mutex);static ssize_t nvram_len;
@@ -150,20 +148,22 @@ static struct miscdevice nvram_dev = {int __init nvram_init (void ) { -int ret =0 ; +int ret; -printk (KERN_INFO "Generic non-volatile memory driver v%s\n" , -NVRAM_VERSION ); - ret =misc_register (&nvram_dev); -if (ret !=0 ) - goto out; +if (arch_nvram_ops.get_size ==NULL ) +return -ENODEV ; - nvram_len =nvram_get_size (); + nvram_len = arch_nvram_ops.get_size ();if (nvram_len <0 ) - nvram_len =NVRAM_SIZE ; +return nvram_len; -out: -return ret; + ret =misc_register (&nvram_dev); +if (ret) +return ret; + +pr_info ("Generic non-volatile memory driver v%s\n" ,NVRAM_VERSION ); + +return 0 ; } void __exit nvram_cleanup(void)
RFC v3 16/24 powerpc, fbdev: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_write_byte()
In reply to Finn ThainMake use of arch_nvram_ops in device drivers so that the nvram_* function exports can be removed.
Since they are no longer global symbols, rename the PPC32 nvram_* functions appropriately.
Add the missing CONFIG_NVRAM test to imsttfb to avoid a build failure.
--- arch/powerpc/kernel/setup_32.c | 8 ++++---- drivers/char/generic_nvram.c | 4 ++-- drivers/video/fbdev/controlfb.c | 4 ++-- drivers/video/fbdev/imsttfb.c | 7 +++---- drivers/video/fbdev/matrox/matroxfb_base.c | 2 +- drivers/video/fbdev/platinumfb.c | 4 ++-- drivers/video/fbdev/valkyriefb.c | 4 ++-- 7 files changed, 16 insertions(+), 17 deletions(-)
Index: linux/arch/powerpc/kernel/setup_32.c
=================================--- linux.orig/arch/powerpc/kernel/setup_32.c 2015-06-28 11:41:44.000000000 +1000
+++ linux/arch/powerpc/kernel/setup_32.c 2015-06-28 11:41:46.000000000 +1000
@@ -170,20 +170,18 @@ __setup("l3cr=", ppc_setup_l3cr);
#ifdef CONFIG_GENERIC_NVRAM
-unsigned char nvram_read_byte(int addr) +static unsigned char ppc_nvram_read_byte(int addr)
{
if (ppc_md.nvram_read_val)
return ppc_md.nvram_read_val(addr);
return 0xff;
}
-EXPORT_SYMBOL(nvram_read_byte);
-void nvram_write_byte(unsigned char val, int addr) +static void ppc_nvram_write_byte(unsigned char val, int addr)
{
if (ppc_md.nvram_write_val)
ppc_md.nvram_write_val(addr, val);
}
-EXPORT_SYMBOL(nvram_write_byte);
static ssize_t ppc_nvram_get_size(void)
{
@@ -200,6 +198,8 @@ static long ppc_nvram_sync(void)
}
const struct nvram_ops arch_nvram_ops = {
+ .read_byte = ppc_nvram_read_byte, + .write_byte = ppc_nvram_write_byte, .get_size = ppc_nvram_get_size, .sync = ppc_nvram_sync,
};
Index: linux/drivers/char/generic_nvram.c
=================================--- linux.orig/drivers/char/generic_nvram.c 2015-06-28 11:41:44.000000000 +1000
+++ linux/drivers/char/generic_nvram.c 2015-06-28 11:41:46.000000000 +1000
@@ -64,7 +64,7 @@ static ssize_t read_nvram(struct file *f
if (*ppos >= nvram_len)
return 0;
for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count)
- if (__put_user(nvram_read_byte(i), p))
+ if (__put_user(arch_nvram_ops.read_byte(i), p))
return -EFAULT;
*ppos = i;
return p - buf;
@@ -84,7 +84,7 @@ static ssize_t write_nvram(struct file *
for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count) {
if (__get_user(c, p))
return -EFAULT;
- nvram_write_byte(c, i);
+ arch_nvram_ops.write_byte(c, i);
}
*ppos = i;
return p - buf;
Index: linux/drivers/video/fbdev/controlfb.c
=================================--- linux.orig/drivers/video/fbdev/controlfb.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/drivers/video/fbdev/controlfb.c 2015-06-28 11:41:46.000000000 +1000
@@ -415,7 +415,7 @@ static int __init init_control(struct fb
/* Try to pick a video mode out of NVRAM if we have one. */
#ifdef CONFIG_NVRAM
if (default_cmode = CMODE_NVRAM) {
- cmode = nvram_read_byte(NV_CMODE);
+ cmode = arch_nvram_ops.read_byte(NV_CMODE);
if(cmode < CMODE_8 || cmode > CMODE_32)
cmode = CMODE_8;
} else
@@ -423,7 +423,7 @@ static int __init init_control(struct fb
cmodeÞfault_cmode;
#ifdef CONFIG_NVRAM
if (default_vmode = VMODE_NVRAM) {
- vmode = nvram_read_byte(NV_VMODE);
+ vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (vmode < 1 || vmode > VMODE_MAX ||
control_mac_modes[vmode - 1].m[full] < cmode) {
sense = read_control_sense(p);
Index: linux/drivers/video/fbdev/matrox/matroxfb_base.c
=================================--- linux.orig/drivers/video/fbdev/matrox/matroxfb_base.c 2015-06-28 11:41:41.000000000 +1000
+++ linux/drivers/video/fbdev/matrox/matroxfb_base.c 2015-06-28 11:41:46.000000000 +1000
@@ -1888,7 +1888,7 @@ static int initMatrox2(struct matrox_fb_
default_vmode = VMODE_640_480_60;
#ifdef CONFIG_NVRAM
if (default_cmode = CMODE_NVRAM)
- default_cmode = nvram_read_byte(NV_CMODE);
+ default_cmode = arch_nvram_ops.read_byte(NV_CMODE);
#endif
if (default_cmode < CMODE_8 || default_cmode > CMODE_32)
default_cmode = CMODE_8;
Index: linux/drivers/video/fbdev/platinumfb.c
=================================--- linux.orig/drivers/video/fbdev/platinumfb.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/drivers/video/fbdev/platinumfb.c 2015-06-28 11:41:46.000000000 +1000
@@ -349,7 +349,7 @@ static int platinum_init_fb(struct fb_in
printk(KERN_INFO "platinumfb: Monitor sense value = 0x%x, ", sense); if (default_vmode = VMODE_NVRAM) {
#ifdef CONFIG_NVRAM
- default_vmode = nvram_read_byte(NV_VMODE);
+ default_vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (default_vmode <= 0 || default_vmode > VMODE_MAX ||
!platinum_reg_init[default_vmode-1])
#endif
@@ -362,7 +362,7 @@ static int platinum_init_fb(struct fb_in
default_vmode = VMODE_640_480_60;
#ifdef CONFIG_NVRAM
if (default_cmode = CMODE_NVRAM)
- default_cmode = nvram_read_byte(NV_CMODE);
+ default_cmode = arch_nvram_ops.read_byte(NV_CMODE);
#endif
if (default_cmode < CMODE_8 || default_cmode > CMODE_32)
default_cmode = CMODE_8;
Index: linux/drivers/video/fbdev/valkyriefb.c
=================================--- linux.orig/drivers/video/fbdev/valkyriefb.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/drivers/video/fbdev/valkyriefb.c 2015-06-28 11:41:46.000000000 +1000
@@ -287,7 +287,7 @@ static void __init valkyrie_choose_mode(
/* Try to pick a video mode out of NVRAM if we have one. */
#if !defined(CONFIG_MAC) && defined(CONFIG_NVRAM)
if (default_vmode = VMODE_NVRAM) {
- default_vmode = nvram_read_byte(NV_VMODE);
+ default_vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (default_vmode <= 0
|| default_vmode > VMODE_MAX || !valkyrie_reg_init[default_vmode - 1])
@@ -300,7 +300,7 @@ static void __init valkyrie_choose_mode(
default_vmode = VMODE_640_480_67;
#if !defined(CONFIG_MAC) && defined(CONFIG_NVRAM)
if (default_cmode = CMODE_NVRAM)
- default_cmode = nvram_read_byte(NV_CMODE);
+ default_cmode = arch_nvram_ops.read_byte(NV_CMODE);
#endif
/*
Index: linux/drivers/video/fbdev/imsttfb.c
=================================--- linux.orig/drivers/video/fbdev/imsttfb.c 2015-06-28 11:41:27.000000000 +1000
+++ linux/drivers/video/fbdev/imsttfb.c 2015-06-28 11:41:46.000000000 +1000
@@ -328,7 +328,6 @@ enum {
TVP = 1
};
-#define USE_NV_MODES 1
#define INIT_BPP 8
#define INIT_XRES 640
#define INIT_YRES 480
@@ -1391,17 +1390,17 @@ static void init_imstt(struct fb_info *i
}
}
-#if USE_NV_MODES && defined(CONFIG_PPC32)
+#if defined(CONFIG_NVRAM) && defined(CONFIG_PPC32)
{
int vmode = init_vmode, cmode = init_cmode;
if (vmode = -1) {
- vmode = nvram_read_byte(NV_VMODE);
+ vmode = arch_nvram_ops.read_byte(NV_VMODE);
if (vmode <= 0 || vmode > VMODE_MAX)
vmode = VMODE_640_480_67;
}
if (cmode = -1) {
- cmode = nvram_read_byte(NV_CMODE);
+ cmode = arch_nvram_ops.read_byte(NV_CMODE);
if (cmode < CMODE_8 || cmode > CMODE_32)
cmode = CMODE_8;
}
RFC v3 23/24 m68k/mac: Fix PRAM accessors
In reply to Finn Thain---
Tested on a PowerBook 520 and Quadra 650.
Changes since v2:
- Make use of the RTC_* macros from the previous patch and add a few more besides.
--- arch/m68k/mac/misc.c | 39 +++++++++++++++++++++++++++++++++------ include/uapi/linux/pmu.h | 2 ++ 2 files changed, 35 insertions(+), 6 deletions(-)
arch/m68k/mac/misc.c +33 -6
@@ -119,19 +119,22 @@ static void pmu_write_time(long data)static unsigned char pmu_pram_read_byte (int offset) {struct adb_request req; -if (pmu_request (&req,NULL ,3 ,PMU_READ_NVRAM , - (offset >>8 ) &0xFF , offset &0xFF ) <0 ) + +if (pmu_request (&req,NULL ,3 ,PMU_READ_XPRAM , + offset &0xFF ,1 ) <0 )return 0 ;while (!req.complete)pmu_poll (); -return req.reply[3 ]; + +return req.reply[1 ]; }static void pmu_pram_write_byte (unsigned char data,int offset) {struct adb_request req; -if (pmu_request (&req,NULL ,4 ,PMU_WRITE_NVRAM , - (offset >>8 ) &0xFF , offset &0xFF , data) <0 ) + +if (pmu_request (&req,NULL ,4 ,PMU_WRITE_XPRAM , + offset &0xFF ,1 , data) <0 )return ;while (!req.complete)pmu_poll ();
@@ -257,6 +260,16 @@ static void via_rtc_send(__u8 data)#define RTC_REG_WRITE_PROTECT 13/* +* Inside Mac has no information about two-byte RTC commands but +* the MESS source code has the essentials. +*/ + +#define RTC_REG_XPRAM 14 +#define RTC_CMD_XPRAM_READ (RTC_CMD_READ(RTC_REG_XPRAM) << 8) +#define RTC_CMD_XPRAM_WRITE (RTC_CMD_WRITE(RTC_REG_XPRAM) << 8) +#define RTC_CMD_XPRAM_ARG (a) (((a & 0xE0) << 3) | ((a & 0x1F) << 2)) + +/* * Execute a VIA PRAM/RTC command. For read commands * data should point to a one-byte buffer for the * resulting data. For write commands it should point
@@ -303,11 +316,25 @@ static void via_rtc_command(int command,static unsigned char via_pram_read_byte (int offset) { -return 0 ; +unsigned char temp; + +via_rtc_command (RTC_CMD_XPRAM_READ |RTC_CMD_XPRAM_ARG (offset), &temp); + +return temp; }static void via_pram_write_byte (unsigned char data,int offset) { +unsigned char temp; + + temp =0x55 ; +via_rtc_command (RTC_CMD_WRITE (RTC_REG_WRITE_PROTECT ), &temp); + + temp = data; +via_rtc_command (RTC_CMD_XPRAM_WRITE |RTC_CMD_XPRAM_ARG (offset), &temp); + + temp =0x55 |RTC_FLG_WRITE_PROTECT ; +via_rtc_command (RTC_CMD_WRITE (RTC_REG_WRITE_PROTECT ), &temp); }/*
include/uapi/linux/pmu.h +2 -0
@@ -18,7 +18,9 @@#define PMU_POWER_CTRL 0x11/* control power of some devices */ #define PMU_ADB_CMD 0x20/* send ADB packet */ #define PMU_ADB_POLL_OFF 0x21/* disable ADB auto-poll */ +#define PMU_WRITE_XPRAM 0x32/* write eXtended Parameter RAM */ #define PMU_WRITE_NVRAM 0x33/* write non-volatile RAM */ +#define PMU_READ_XPRAM 0x3a/* read eXtended Parameter RAM */ #define PMU_READ_NVRAM 0x3b/* read non-volatile RAM */ #define PMU_SET_RTC 0x30/* set real-time clock */ #define PMU_READ_RTC 0x38/* read real-time clock */
v3 cover Re-use nvram module
The generic NVRAM module, drivers/char/generic_nvram, implements a /dev/nvram misc device. It is used only by 32-bit PowerPC platforms and isn't generic enough to be more widely used.
The RTC NVRAM module, drivers/char/nvram, also implements a /dev/nvram misc device. It is used by x86, ARM and m68k.
The former module cannot be used on x86, ARM or m68k because it cannot co-exist with the latter module, partly due to the Kconfig logic.
It is possible to modify the modules so that one kernel binary could have either, neither or both. However, automatically loading the appropriate module is then impossible; if both provide the char-major-10-144 alias then the wrong module will end up being loaded. Hence a multi-platform kernel binary needs a single generic nvram module with alias char-major-10-144.
Therefore, drivers/char/nvram.c should be made more generic and the arch-specific code therein should be moved to a more appropriate place under arch/. Also, drivers/char/generic_nvram.c should be removed to reduce code duplication.
In this patch series, Atari-specific code is moved from the nvram module to arch/m68k/atari. More arch-specific code in the nvram module could be moved, probably to arch/x86, but it is difficult to determine just what code is relevant to ARM platforms and what code is x86-only.
In addressing code duplication, this patch series removes three inconsistent /dev/nvram misc device implementations. One of these, drivers/macintosh/nvram.c is entirely unused already. The other two, drivers/char/generic_nvram.c and the misc device implementation in arch/powerpc/kernel/nvram_64.c, are replaced by drivers/char/nvram.c.
A benefit of this work is better consistency -- between PPC32 and PPC64 as well as between PPC_PMAC and MAC. This new uniformity does have implications for userspace, that is, some error codes for some ioctl calls become consistent on all PowerPC platforms.
The drivers/char/nvram module becomes sufficiently generic to be useful to other platforms and architectures, besides those with "CMOS" RTC. At the end of this patch series the module is adopted by the m68k Mac port, which already has PRAM access functions but lacks the /dev/nvram misc device.
This patch series has been compile-tested for arm, m68k, powerpc and x86. The nvram and thinkpad_acpi modules were regression tested on a ThinkPad T43. The /dev/nvram functionality was also regression tested on a G3 PowerMac. The nvram module was also tested on a PowerBook 520 and Quadra 650. Note that my testing doesn't cover PPC64 or Atari.
Changes since v1:
- Minor changes to patches 7, 15 and 20 as described in commit logs.
- Revised patches 21 and 24 to address comments from Geert.
Changes since v2:
- Dropped patch 1, "macintosh/nvram: Remove as unused", because it has since been merged.
- Inserted a new patch, "m68k/mac: Use macros for RTC accesses not magic numbers".
- Revised patches 21 and 23 to address comments from Geert.
--- arch/m68k/Kconfig | 3 arch/m68k/atari/Makefile | 2 arch/m68k/atari/nvram.c | 291 +++++++++++ arch/m68k/kernel/setup_mm.c | 107 ++++ arch/m68k/mac/misc.c | 207 +++++--- arch/powerpc/Kconfig | 5 arch/powerpc/include/asm/nvram.h | 9 arch/powerpc/kernel/nvram_64.c | 203 +------ arch/powerpc/kernel/setup_32.c | 27 - arch/powerpc/platforms/chrp/Makefile | 2 arch/powerpc/platforms/chrp/nvram.c | 14 arch/powerpc/platforms/chrp/setup.c | 2 arch/powerpc/platforms/powermac/Makefile | 5 arch/powerpc/platforms/powermac/nvram.c | 9 arch/powerpc/platforms/powermac/setup.c | 3 drivers/char/Kconfig | 13 drivers/char/Makefile | 6 drivers/char/generic_nvram.c | 174 ------ drivers/char/nvram.c | 742 ++++++++++++----------------- drivers/platform/x86/thinkpad_acpi.c | 20 drivers/scsi/Kconfig | 6 drivers/scsi/atari_scsi.c | 16 drivers/video/fbdev/controlfb.c | 4 drivers/video/fbdev/imsttfb.c | 7 drivers/video/fbdev/matrox/matroxfb_base.c | 4 drivers/video/fbdev/platinumfb.c | 4 drivers/video/fbdev/valkyriefb.c | 4 include/linux/nvram.h | 23 include/uapi/linux/pmu.h | 2 29 files changed, 982 insertions(+), 932 deletions(-)
RFC v3 2/24 m68k/atari: Move Atari-specific code out of drivers/char/nvram.c
Move the m68k-specific code elsewhere to make the driver generic.
Change the vmode calculation from logical OR to bitwise OR, since it is obviously wrong.
---
BTW, I didn't change the SCSI ID location in NVRAM. This code says 16 whereas atari_scsi says 14. Which one is correct?
--- arch/m68k/atari/Makefile | 2 arch/m68k/atari/nvram.c | 255 ++++++++++++++++++++++++++++++++++++++++++ drivers/char/nvram.c | 280 +++++------------------------------------------ 3 files changed, 292 insertions(+), 245 deletions(-)
arch/m68k/atari/nvram.c new file +255 -0
@@ -0,0 +1,255 @@ +/* +* CMOS/NV-RAM driver for Atari. Adapted from drivers/char/nvram.c. +* Copyright (C) 1997 Roman Hodek <[email protected]> +* idea by and with help from Richard Jelinek <[email protected]> +* Portions copyright (c) 2001,2002 Sun Microsystems ([email protected]) +* Further contributions from Cesar Barros, Erik Gilling, Tim Hockin and +* Wim Van Sebroeck. +*/ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/module.h> +#include <linux/nvram.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <asm/atarihw.h> +#include <asm/atariints.h> + +#define NVRAM_BYTES 50 + +/* It is worth noting that these functions all access bytes of general +* purpose memory in the NVRAM - that is to say, they all add the +* NVRAM_FIRST_BYTE offset. Pass them offsets into NVRAM as if you did not +* know about the RTC cruft. +*/ + +/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with +* rtc_lock held. Due to the index-port/data-port design of the RTC, we +* don't want two different things trying to get to it at once. (e.g. the +* periodic 11 min sync from kernel/time/ntp.c vs. this driver.) +*/ + +unsigned char __nvram_read_byte (int i) +{ +return CMOS_READ (NVRAM_FIRST_BYTE + i); +} + +unsigned char nvram_read_byte (int i) +{ +unsigned long flags; +unsigned char c; + +spin_lock_irqsave (&rtc_lock, flags); + c =__nvram_read_byte (i); +spin_unlock_irqrestore (&rtc_lock, flags); +return c; +} +EXPORT_SYMBOL (nvram_read_byte); + +/* This races nicely with trying to read with checksum checking */ +void __nvram_write_byte (unsigned char c,int i) +{ +CMOS_WRITE (c,NVRAM_FIRST_BYTE + i); +} + +void nvram_write_byte (unsigned char c,int i) +{ +unsigned long flags; + +spin_lock_irqsave (&rtc_lock, flags); +__nvram_write_byte (c, i); +spin_unlock_irqrestore (&rtc_lock, flags); +} + +/* On Ataris, the checksum is over all bytes except the checksum bytes +* themselves; these are at the very end. +*/ +#define ATARI_CKS_RANGE_START 0 +#define ATARI_CKS_RANGE_END 47 +#define ATARI_CKS_LOC 48 + +int __nvram_check_checksum (void ) +{ +int i; +unsigned char sum =0 ; + +for (i =ATARI_CKS_RANGE_START ; i <=ATARI_CKS_RANGE_END ; ++i) + sum +=__nvram_read_byte (i); +return (__nvram_read_byte (ATARI_CKS_LOC ) == (~sum &0xff )) && + (__nvram_read_byte (ATARI_CKS_LOC +1 ) == (sum &0xff )); +} + +int nvram_check_checksum (void ) +{ +unsigned long flags; +int rv; + +spin_lock_irqsave (&rtc_lock, flags); + rv =__nvram_check_checksum (); +spin_unlock_irqrestore (&rtc_lock, flags); +return rv; +} +EXPORT_SYMBOL (nvram_check_checksum); + +static void __nvram_set_checksum (void ) +{ +int i; +unsigned char sum =0 ; + +for (i =ATARI_CKS_RANGE_START ; i <=ATARI_CKS_RANGE_END ; ++i) + sum +=__nvram_read_byte (i); +__nvram_write_byte (~sum,ATARI_CKS_LOC ); +__nvram_write_byte (sum,ATARI_CKS_LOC +1 ); +} + +#ifdef CONFIG_PROC_FS +static struct { +unsigned char val; +char *name; +} boot_prefs[] = { + {0x80 ,"TOS" }, + {0x40 ,"ASV" }, + {0x20 ,"NetBSD (?)" }, + {0x10 ,"Linux" }, + {0x00 ,"unspecified" }, +}; + +static char *languages[] = { +"English (US)" , +"German" , +"French" , +"English (UK)" , +"Spanish" , +"Italian" , +"6 (undefined)" , +"Swiss (French)" , +"Swiss (German)" , +}; + +static char *dateformat[] = { +"MM%cDD%cYY" , +"DD%cMM%cYY" , +"YY%cMM%cDD" , +"YY%cDD%cMM" , +"4 (undefined)" , +"5 (undefined)" , +"6 (undefined)" , +"7 (undefined)" , +}; + +static char *colors[] = { +"2" ,"4" ,"16" ,"256" ,"65536" ,"??" ,"??" ,"??" +}; + +static void atari_nvram_proc_read (unsigned char *nvram,struct seq_file *seq, +void *offset) +{ +int checksum; +int i; +unsigned vmode; + +spin_lock_irq (&rtc_lock); + checksum =__nvram_check_checksum (); +spin_unlock_irq (&rtc_lock); + +seq_printf (seq,"Checksum status : %svalid\n" , checksum ?"" :"not " ); + +seq_puts (seq,"Boot preference : " ); +for (i =ARRAY_SIZE (boot_prefs) -1 ; i >=0 ; --i) +if (nvram[1 ] == boot_prefs[i].val) { +seq_printf (seq,"%s\n" , boot_prefs[i].name); +break ; + } +if (i <0 ) +seq_printf (seq,"0x%02x (undefined)\n" , nvram[1 ]); + +seq_printf (seq,"SCSI arbitration : %s\n" , + (nvram[16 ] &0x80 ) ?"on" :"off" ); +seq_puts (seq,"SCSI host ID : " ); +if (nvram[16 ] &0x80 ) +seq_printf (seq,"%d\n" , nvram[16 ] &7 ); +else +seq_puts (seq,"n/a\n" ); + +if (!MACH_IS_FALCON ) +return ; + +seq_puts (seq,"OS language : " ); +if (nvram[6 ] <ARRAY_SIZE (languages)) +seq_printf (seq,"%s\n" , languages[nvram[6 ]]); +else +seq_printf (seq,"%u (undefined)\n" , nvram[6 ]); +seq_puts (seq,"Keyboard language: " ); +if (nvram[7 ] <ARRAY_SIZE (languages)) +seq_printf (seq,"%s\n" , languages[nvram[7 ]]); +else +seq_printf (seq,"%u (undefined)\n" , nvram[7 ]); +seq_puts (seq,"Date format : " ); +seq_printf (seq, dateformat[nvram[8 ] &7 ], + nvram[9 ] ? nvram[9 ] :'/' , nvram[9 ] ? nvram[9 ] :'/' ); +seq_printf (seq,", %dh clock\n" , nvram[8 ] &16 ?24 :12 ); +seq_puts (seq,"Boot delay : " ); +if (nvram[10 ] ==0 ) +seq_puts (seq,"default" ); +else +seq_printf (seq,"%ds%s\n" , nvram[10 ], + nvram[10 ] <8 ?", no memory test" :"" ); + + vmode = (nvram[14 ] <<8 ) | nvram[15 ]; +seq_printf (seq, +"Video mode : %s colors, %d columns, %s %s monitor\n" , + colors[vmode &7 ], vmode &8 ?80 :40 , + vmode &16 ?"VGA" :"TV" , vmode &32 ?"PAL" :"NTSC" ); +seq_printf (seq, +" %soverscan, compat. mode %s%s\n" , + vmode &64 ?"" :"no " , vmode &128 ?"on" :"off" , + vmode &256 ? + (vmode &16 ?", line doubling" :", half screen" ) :"" ); +} + +static int nvram_proc_read (struct seq_file *seq,void *offset) +{ +unsigned char contents[NVRAM_BYTES ]; +int i; + +spin_lock_irq (&rtc_lock); +for (i =0 ; i <NVRAM_BYTES ; ++i) + contents[i] =__nvram_read_byte (i); +spin_unlock_irq (&rtc_lock); + +atari_nvram_proc_read (contents, seq, offset); + +return 0 ; +} + +static int nvram_proc_open (struct inode *inode,struct file *file) +{ +return single_open (file, nvram_proc_read,NULL ); +} + +static const struct file_operations nvram_proc_fops = { + .owner =THIS_MODULE , + .open = nvram_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init atari_nvram_init (void ) +{ +if (!(MACH_IS_ATARI &&ATARIHW_PRESENT (TT_CLK ))) +return -ENODEV ; + +if (!proc_create ("driver/nvram" ,0 ,NULL , &nvram_proc_fops)) { +pr_err ("nvram: can't create /proc/driver/nvram\n" ); +return -ENOMEM ; + } + +return 0 ; +} +device_initcall (atari_nvram_init); +#endif /* CONFIG_PROC_FS */
arch/m68k/atari/Makefile +2 -0
@@ -6,3 +6,5 @@ obj-y := config.o time.o debug.o ataint atasound.o stram.o obj-$(CONFIG_ATARI_KBD_CORE) += atakeyb.o + +obj-$(CONFIG_NVRAM:m=y) += nvram.o
drivers/char/nvram.c +35 -245
350 lines not on this page · raw message
RFC v3 4/24 char/nvram: Re-order functions to remove forward declarations and #ifdefs
In reply to Finn ThainAlso give functions more sensible names: nvram_misc_* for misc device ops, nvram_proc_* for proc file ops and nvram_module_* for init and exit functions. This makes them distict from nvram_ops members.
--- drivers/char/nvram.c | 194 ++++++++++++++++++++++----------------------------- 1 file changed, 86 insertions(+), 108 deletions(-)
drivers/char/nvram.c +86 -108
@@ -54,11 +54,6 @@ static int nvram_open_mode; /* special o#define NVRAM_WRITE 1/* opened for writing (exclusive) */ #define NVRAM_EXCL 2/* opened with O_EXCL */ -#ifdef CONFIG_PROC_FS -static void pc_nvram_proc_read (unsigned char *contents,struct seq_file *seq, -void *offset); -#endif -/* * These functions are provided to be called internally or by other parts of * the kernel. It's up to the caller to ensure correct checksum before reading
@@ -170,7 +165,7 @@ void nvram_set_checksum(void)* The are the file operation function for user access to /dev/nvram */ -static loff_t nvram_llseek (struct file *file,loff_t offset,int origin) +static loff_t nvram_misc_llseek (struct file *file,loff_t offset,int origin) {switch (origin) {case 0 :
@@ -189,8 +184,8 @@ static loff_t nvram_llseek(struct file *return (offset >=0 ) ? (file->f_pos = offset) : -EINVAL ; } -static ssize_t nvram_read (struct file *file,char __user *buf, -size_t count,loff_t *ppos) +static ssize_t nvram_misc_read (struct file *file,char __user *buf, +size_t count,loff_t *ppos) {unsigned char contents[NVRAM_BYTES ];unsigned i = *ppos;
@@ -218,8 +213,8 @@ checksum_err:return -EIO ; } -static ssize_t nvram_write (struct file *file,const char __user *buf, -size_t count,loff_t *ppos) +static ssize_t nvram_misc_write (struct file *file,const char __user *buf, +size_t count,loff_t *ppos) {unsigned char contents[NVRAM_BYTES ];unsigned i = *ppos;
@@ -257,8 +252,8 @@ checksum_err:return -EIO ; } -static long nvram_ioctl (struct file *file,unsigned int cmd, -unsigned long arg) +static long nvram_misc_ioctl (struct file *file,unsigned int cmd, +unsigned long arg) {int i;
@@ -298,7 +293,7 @@ static long nvram_ioctl(struct file *fil } } -static int nvram_open (struct inode *inode,struct file *file) +static int nvram_misc_open (struct inode *inode,struct file *file) {spin_lock (&nvram_state_lock);
@@ -320,7 +315,7 @@ static int nvram_open(struct inode *inodreturn 0 ; } -static int nvram_release (struct inode *inode,struct file *file) +static int nvram_misc_release (struct inode *inode,struct file *file) {spin_lock (&nvram_state_lock);
@@ -337,100 +332,6 @@ static int nvram_release(struct inode *ireturn 0 ; } -#ifndef CONFIG_PROC_FS -static int nvram_add_proc_fs (void ) -{ -return 0 ; -} - -#else - -static int nvram_proc_read (struct seq_file *seq,void *offset) -{ -unsigned char contents[NVRAM_BYTES ]; -int i =0 ; - -spin_lock_irq (&rtc_lock); -for (i =0 ; i <NVRAM_BYTES ; ++i) - contents[i] =__nvram_read_byte (i); -spin_unlock_irq (&rtc_lock); - -pc_nvram_proc_read (contents, seq, offset); - -return 0 ; -} - -static int nvram_proc_open (struct inode *inode,struct file *file) -{ -return single_open (file, nvram_proc_read,NULL ); -} - -static const struct file_operations nvram_proc_fops = { - .owner =THIS_MODULE , - .open = nvram_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int nvram_add_proc_fs (void ) -{ -if (!proc_create ("driver/nvram" ,0 ,NULL , &nvram_proc_fops)) -return -ENOMEM ; -return 0 ; -} - -#endif /* CONFIG_PROC_FS */ - -static const struct file_operations nvram_fops = { - .owner =THIS_MODULE , - .llseek = nvram_llseek, - .read = nvram_read, - .write = nvram_write, - .unlocked_ioctl = nvram_ioctl, - .open = nvram_open, - .release = nvram_release, -}; - -static struct miscdevice nvram_dev = { -NVRAM_MINOR , -"nvram" , - &nvram_fops -}; - -static int __init nvram_init (void ) -{ -int ret; - - ret =misc_register (&nvram_dev); -if (ret) { -printk (KERN_ERR "nvram: can't misc_register on minor=%d\n" , -NVRAM_MINOR ); - goto out; - } - ret =nvram_add_proc_fs (); -if (ret) { -printk (KERN_ERR "nvram: can't create /proc/driver/nvram\n" ); - goto outmisc; - } - ret =0 ; -printk (KERN_INFO "Non-volatile memory driver v" NVRAM_VERSION "\n" ); -out: -return ret; -outmisc: -misc_deregister (&nvram_dev); - goto out; -} - -static void __exit nvram_cleanup_module(void) -{ -remove_proc_entry ("driver/nvram" ,NULL ); -misc_deregister (&nvram_dev); -} - -module_init (nvram_init); -module_exit (nvram_cleanup_module); -#ifdef CONFIG_PROC_FS static char *floppy_types[] = {
@@ -508,7 +409,84 @@ static void pc_nvram_proc_read(unsignedreturn ; } +static int nvram_proc_read (struct seq_file *seq,void *offset) +{ +unsigned char contents[NVRAM_BYTES ]; +int i =0 ; + +spin_lock_irq (&rtc_lock); +for (i =0 ; i <NVRAM_BYTES ; ++i) + contents[i] =__nvram_read_byte (i); +spin_unlock_irq (&rtc_lock); + +pc_nvram_proc_read (contents, seq, offset); + +return 0 ; +} + +static int nvram_proc_open (struct inode *inode,struct file *file) +{ +return single_open (file, nvram_proc_read,NULL ); +} + +static const struct file_operations nvram_proc_fops = { + .owner =THIS_MODULE , + .open = nvram_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* CONFIG_PROC_FS */ +static const struct file_operations nvram_misc_fops = { + .owner =THIS_MODULE , + .llseek = nvram_misc_llseek, + .read = nvram_misc_read, + .write = nvram_misc_write, + .unlocked_ioctl = nvram_misc_ioctl, + .open = nvram_misc_open, + .release = nvram_misc_release, +}; + +static struct miscdevice nvram_misc = { +NVRAM_MINOR , +"nvram" , + &nvram_misc_fops, +}; + +static int __init nvram_module_init (void ) +{ +int ret; + + ret =misc_register (&nvram_misc); +if (ret) { +pr_err ("nvram: can't misc_register on minor=%d\n" ,NVRAM_MINOR ); +return ret; + } + +#ifdef CONFIG_PROC_FS +if (!proc_create ("driver/nvram" ,0 ,NULL , &nvram_proc_fops)) { +pr_err ("nvram: can't create /proc/driver/nvram\n" ); +misc_deregister (&nvram_misc); +return -ENOMEM ; + } +#endif + +pr_info ("Non-volatile memory driver v" NVRAM_VERSION "\n" ); +return 0 ; +} + +static void __exit nvram_module_exit(void) +{ +#ifdef CONFIG_PROC_FS +remove_proc_entry ("driver/nvram" ,NULL ); +#endif +misc_deregister (&nvram_misc); +} + +module_init (nvram_module_init); +module_exit (nvram_module_exit); +MODULE_LICENSE ("GPL" );MODULE_ALIAS_MISCDEV (NVRAM_MINOR );
RFC v3 5/24 char/nvram: Adopt arch_nvram_ops
In reply to Finn ThainDifferent platforms and architectures offer different NVRAM sizes and access methods. E.g. PPC32 has byte-at-a-time read/write functions whereas PPC64 has byte-range read/write functions. Adopt the nvram_ops struct so the nvram module can call such functions as are defined by the various platforms and architectures.
---
The #ifdefs here restrict the procfs and checksumming code to those architectures with PC-style RTC NVRAM. There may be a better place for that code but it's an open question. See https://lkml.org/lkml/2015/2/3/22
The procfs code here, if irrelevant to ARM platforms, could be moved to arch/x86 (like the earlier patch does for m68k code) and the nvram ops could be implemented and exported by the rtc-cmos driver instead. This would eliminate these #ifdefs.
--- drivers/char/nvram.c | 30 +++++++++++++++++++++++++++--- include/linux/nvram.h | 2 ++ 2 files changed, 29 insertions(+), 3 deletions(-)
drivers/char/nvram.c +27 -3
@@ -51,9 +51,12 @@ static DEFINE_MUTEX(nvram_mutex);static DEFINE_SPINLOCK (nvram_state_lock);static int nvram_open_cnt;/* #times opened */ static int nvram_open_mode;/* special open modes */ +static ssize_t nvram_size;#define NVRAM_WRITE 1/* opened for writing (exclusive) */ #define NVRAM_EXCL 2/* opened with O_EXCL */ +#if defined(CONFIG_X86 ) || defined(CONFIG_ARM ) +/* * These functions are provided to be called internally or by other parts of * the kernel. It's up to the caller to ensure correct checksum before reading
@@ -161,6 +164,20 @@ void nvram_set_checksum(void) }#endif /* 0 */ +static ssize_t nvram_get_size (void ) +{ +return NVRAM_BYTES ; +} + +const struct nvram_ops arch_nvram_ops = { + .read_byte = nvram_read_byte, + .write_byte = nvram_write_byte, + .get_size = nvram_get_size, +}; +EXPORT_SYMBOL (arch_nvram_ops); + +#endif /* CONFIG_X86 || CONFIG_ARM */ +/* * The are the file operation function for user access to /dev/nvram */
@@ -332,7 +349,7 @@ static int nvram_misc_release(struct inoreturn 0 ; } -#ifdef CONFIG_PROC_FS +#if defined(CONFIG_PROC_FS ) && (defined(CONFIG_X86 ) || defined(CONFIG_ARM ))static char *floppy_types[] = { "none", "5.25'' 360k", "5.25'' 1.2M", "3.5'' 720k", "3.5'' 1.44M",
@@ -459,13 +476,20 @@ static int __init nvram_module_init(void {int ret; +if (arch_nvram_ops.get_size ==NULL ) +return -ENODEV ; + + nvram_size = arch_nvram_ops.get_size (); +if (nvram_size <0 ) +return nvram_size; + ret =misc_register (&nvram_misc);if (ret) {pr_err ("nvram: can't misc_register on minor=%d\n" ,NVRAM_MINOR );return ret; } -#ifdef CONFIG_PROC_FS +#if defined(CONFIG_PROC_FS ) && (defined(CONFIG_X86 ) || defined(CONFIG_ARM ))if (!proc_create ("driver/nvram" ,0 ,NULL , &nvram_proc_fops)) {pr_err ("nvram: can't create /proc/driver/nvram\n" );misc_deregister (&nvram_misc);
@@ -479,7 +503,7 @@ static int __init nvram_module_init(void static void __exit nvram_module_exit(void) { -#ifdef CONFIG_PROC_FS +#if defined(CONFIG_PROC_FS ) && (defined(CONFIG_X86 ) || defined(CONFIG_ARM ))remove_proc_entry ("driver/nvram" ,NULL );#endif misc_deregister (&nvram_misc);
include/linux/nvram.h +2 -0
@@ -14,6 +14,8 @@ extern int nvram_check_checksum(void);struct nvram_ops {ssize_t (*read)(char *,size_t ,loff_t *);ssize_t (*write)(char *,size_t ,loff_t *); +unsigned char (*read_byte)(int ); +void (*write_byte)(unsigned char ,int );ssize_t (*get_size)(void ); };
RFC v3 7/24 char/nvram: Allow the set_checksum and initialize ioctls to be omitted
In reply to Finn ThainThe drivers/char/nvram module has previously only supported RTC "CMOS" NVRAM, for which it provides appropriate checksum ioctls. Make these ioctls optional so the module can be re-used with other kinds of NVRAM.
The ops struct methods that implement the ioctls now return error codes so that a multi-platform kernel binary can do the right thing when running on hardware without suitable NVRAM.
---
Changed since v1:
- Don't bother acquiring the mutex for unimplemented ioctls.
--- drivers/char/nvram.c | 71 ++++++++++++++++++++++++++++---------------------- include/linux/nvram.h | 2 + 2 files changed, 43 insertions(+), 30 deletions(-)
drivers/char/nvram.c +41 -30
@@ -153,16 +153,25 @@ static void __nvram_set_checksum(void)__nvram_write_byte (sum &0xff ,PC_CKS_LOC +1 ); } -#if 0 -void nvram_set_checksum (void ) +static long nvram_set_checksum (void ) { -unsigned long flags; +spin_lock_irq (&rtc_lock); +__nvram_set_checksum (); +spin_unlock_irq (&rtc_lock); +return 0 ; +} + +static long nvram_initialize (void ) +{ +ssize_t i; -spin_lock_irqsave (&rtc_lock, flags); +spin_lock_irq (&rtc_lock); +for (i =0 ; i <NVRAM_BYTES ; ++i) +__nvram_write_byte (0 , i);__nvram_set_checksum (); -spin_unlock_irqrestore (&rtc_lock, flags); +spin_unlock_irq (&rtc_lock); +return 0 ; } -#endif /* 0 */ static ssize_t nvram_get_size (void ) {
@@ -173,6 +182,8 @@ const struct nvram_ops arch_nvram_ops = .read_byte = nvram_read_byte, .write_byte = nvram_write_byte, .get_size = nvram_get_size, + .set_checksum = nvram_set_checksum, + .initialize = nvram_initialize, };EXPORT_SYMBOL (arch_nvram_ops);
@@ -272,51 +283,51 @@ checksum_err:static long nvram_misc_ioctl (struct file *file,unsigned int cmd,unsigned long arg) { -int i; +long ret = -ENOTTY ;switch (cmd) { -case NVRAM_INIT :/* initialize NVRAM contents and checksum */ if (!capable (CAP_SYS_ADMIN ))return -EACCES ; -mutex_lock (&nvram_mutex); -spin_lock_irq (&rtc_lock); - -for (i =0 ; i <NVRAM_BYTES ; ++i) -__nvram_write_byte (0 , i); -__nvram_set_checksum (); - -spin_unlock_irq (&rtc_lock); -mutex_unlock (&nvram_mutex); -return 0 ; - +if (arch_nvram_ops.initialize !=NULL ) { +mutex_lock (&nvram_mutex); + ret = arch_nvram_ops.initialize (); +mutex_unlock (&nvram_mutex); + } +break ;case NVRAM_SETCKS :/* just set checksum, contents unchanged (maybe useful after * checksum garbaged somehow...) */ if (!capable (CAP_SYS_ADMIN ))return -EACCES ; -mutex_lock (&nvram_mutex); -spin_lock_irq (&rtc_lock); -__nvram_set_checksum (); -spin_unlock_irq (&rtc_lock); -mutex_unlock (&nvram_mutex); -return 0 ; - -default : -return -ENOTTY ; +if (arch_nvram_ops.set_checksum !=NULL ) { +mutex_lock (&nvram_mutex); + ret = arch_nvram_ops.set_checksum (); +mutex_unlock (&nvram_mutex); + } +break ; } +return ret; }static int nvram_misc_open (struct inode *inode,struct file *file) {spin_lock (&nvram_state_lock); +/* Prevent multiple readers/writers if desired. */ if ((nvram_open_cnt && (file->f_flags &O_EXCL )) || - (nvram_open_mode &NVRAM_EXCL ) || - ((file->f_mode &FMODE_WRITE ) && (nvram_open_mode &NVRAM_WRITE ))) { + (nvram_open_mode &NVRAM_EXCL )) { +spin_unlock (&nvram_state_lock); +return -EBUSY ; + } + +/* Prevent multiple writers if the set_checksum ioctl is implemented. */ +if ((arch_nvram_ops.set_checksum !=NULL ) && + (file->f_mode &FMODE_WRITE ) && + (nvram_open_mode &NVRAM_WRITE )) {spin_unlock (&nvram_state_lock);return -EBUSY ; }
include/linux/nvram.h +2 -0
@@ -17,6 +17,8 @@ struct nvram_ops {unsigned char (*read_byte)(int );void (*write_byte)(unsigned char ,int );ssize_t (*get_size)(void ); +long (*set_checksum)(void ); +long (*initialize)(void ); };extern const struct nvram_ops arch_nvram_ops;
RFC v3 8/24 char/nvram: Implement NVRAM read/write methods
In reply to Finn ThainRefactor the RTC "CMOS" NVRAM functions so that they can be used as arch_nvram_ops methods. Checksumming logic is moved from the misc device operations to the nvram read/write operations.
This makes the misc device implementation more generic. This also preserves the locking semantics such that "read if checksum valid" and "write and update checksum" remain atomic operations.
PPC64 implements byte-range read/write methods which are similar to file_operations struct methods. Other platforms provide only byte-at-a-time functions. So the misc device prefers the former but will fall back on the latter.
--- drivers/char/nvram.c | 162 +++++++++++++++++++++++++++++++++++---------------- 1 file changed, 114 insertions(+), 48 deletions(-)
drivers/char/nvram.c +114 -48
@@ -41,6 +41,7 @@#include <linux/init.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/uaccess.h>
@@ -178,9 +179,48 @@ static ssize_t nvram_get_size(void)return NVRAM_BYTES ; } +static ssize_t nvram_read (char *buf,size_t count,loff_t *ppos) +{ +char *p = buf; +loff_t i; + +spin_lock_irq (&rtc_lock); +if (!__nvram_check_checksum ()) { +spin_unlock_irq (&rtc_lock); +return -EIO ; + } +for (i = *ppos; count >0 && i <NVRAM_BYTES ; --count, ++i, ++p) + *p =__nvram_read_byte (i); +spin_unlock_irq (&rtc_lock); + + *ppos = i; +return p - buf; +} + +static ssize_t nvram_write (char *buf,size_t count,loff_t *ppos) +{ +char *p = buf; +loff_t i; + +spin_lock_irq (&rtc_lock); +if (!__nvram_check_checksum ()) { +spin_unlock_irq (&rtc_lock); +return -EIO ; + } +for (i = *ppos; count >0 && i <NVRAM_BYTES ; --count, ++i, ++p) +__nvram_write_byte (*p, i); +__nvram_set_checksum (); +spin_unlock_irq (&rtc_lock); + + *ppos = i; +return p - buf; +} +const struct nvram_ops arch_nvram_ops = { .read_byte = nvram_read_byte, .write_byte = nvram_write_byte, + .read = nvram_read, + .write = nvram_write, .get_size = nvram_get_size, .set_checksum = nvram_set_checksum, .initialize = nvram_initialize,
@@ -215,69 +255,95 @@ static loff_t nvram_misc_llseek(struct fstatic ssize_t nvram_misc_read (struct file *file,char __user *buf,size_t count,loff_t *ppos) { -unsigned char contents[NVRAM_BYTES ]; -unsigned i = *ppos; -unsigned char *tmp; - -spin_lock_irq (&rtc_lock); +loff_t i; +char __user *p = buf; -if (!__nvram_check_checksum ()) - goto checksum_err; - -for (tmp = contents; count-- >0 && i <NVRAM_BYTES ; ++i, ++tmp) - *tmp =__nvram_read_byte (i); - -spin_unlock_irq (&rtc_lock); - -if (copy_to_user (buf, contents, tmp - contents)) +if (!access_ok (VERIFY_WRITE , buf, count))return -EFAULT ; +if (*ppos >= nvram_size) +return 0 ; - *ppos = i; - -return tmp - contents; +/* If the arch provided a byte range read op, use it. Otherwise +* fall back on the byte-at-a-time accessor. +*/ +if (arch_nvram_ops.read !=NULL ) { +char *tmp; +ssize_t ret; + + count =min_t (size_t, count, nvram_size - *ppos); + count =min_t (size_t, count,PAGE_SIZE ); + + tmp =kmalloc (count,GFP_KERNEL ); +if (!tmp) +return -ENOMEM ; + + ret = arch_nvram_ops.read (tmp, count, ppos); +if (ret <=0 ) + goto out; + +if (copy_to_user (buf, tmp, ret)) { + *ppos -= ret; + ret = -EFAULT ; + } + +out: +kfree (tmp); +return ret; + } -checksum_err: -spin_unlock_irq (&rtc_lock); -return -EIO ; +for (i = *ppos; count >0 && i < nvram_size; ++i, ++p, --count) +if (__put_user (arch_nvram_ops.read_byte (i), p)) +return -EFAULT ; + *ppos = i; +return p - buf; }static ssize_t nvram_misc_write (struct file *file,const char __user *buf,size_t count,loff_t *ppos) { -unsigned char contents[NVRAM_BYTES ]; -unsigned i = *ppos; -unsigned char *tmp; - -if (i >=NVRAM_BYTES ) -return 0 ;/* Past EOF */ - -if (count >NVRAM_BYTES - i) - count =NVRAM_BYTES - i; -if (count >NVRAM_BYTES ) -return -EFAULT ;/* Can't happen, but prove it to gcc */ +loff_t i; +const char __user *p = buf; -if (copy_from_user (contents, buf, count)) +if (!access_ok (VERIFY_READ , buf, count))return -EFAULT ; +if (*ppos >= nvram_size) +return 0 ; -spin_lock_irq (&rtc_lock); - -if (!__nvram_check_checksum ()) - goto checksum_err; - -for (tmp = contents; count--; ++i, ++tmp) -__nvram_write_byte (*tmp, i); - -__nvram_set_checksum (); +/* If the arch provided a byte range write op, use it. Otherwise +* fall back on the byte-at-a-time accessor. +*/ +if (arch_nvram_ops.write !=NULL ) { +char *tmp; +ssize_t ret; + + count =min_t (size_t, count, nvram_size - *ppos); + count =min_t (size_t, count,PAGE_SIZE ); + + tmp =kmalloc (count,GFP_KERNEL ); +if (!tmp) +return -ENOMEM ; + +if (copy_from_user (tmp, buf, count)) { + ret = -EFAULT ; + goto out; + } + + ret = arch_nvram_ops.write (tmp, count, ppos); + +out: +kfree (tmp); +return ret; + } -spin_unlock_irq (&rtc_lock); +for (i = *ppos; count >0 && i < nvram_size; ++i, ++p, --count) { +char c; +if (__get_user (c, p)) +return -EFAULT ; + arch_nvram_ops.write_byte (c, i); + } *ppos = i; - -return tmp - contents; - -checksum_err: -spin_unlock_irq (&rtc_lock); -return -EIO ; +return p - buf; } static long nvram_misc_ioctl(struct file *file, unsigned int cmd,
RFC v3 9/24 char/nvram: Use generic fixed_size_llseek()
In reply to Finn Thain--- drivers/char/nvram.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-)
drivers/char/nvram.c +1 -15
@@ -235,21 +235,7 @@ EXPORT_SYMBOL(arch_nvram_ops);static loff_t nvram_misc_llseek (struct file *file,loff_t offset,int origin) { -switch (origin) { -case 0 : -/* nothing to do */ -break ; -case 1 : - offset += file->f_pos; -break ; -case 2 : - offset +=NVRAM_BYTES ; -break ; -default : -return -EINVAL ; - } - -return (offset >=0 ) ? (file->f_pos = offset) : -EINVAL ; +return fixed_size_llseek (file, offset, origin, nvram_size); } static ssize_t nvram_misc_read(struct file *file, char __user *buf,
RFC v3 10/24 m68k/atari: Implement arch_nvram_ops methods and enable CONFIG_HAVE_ARCH_NVRAM_OPS
In reply to Finn ThainAtari RTC NVRAM has a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS.
---
This re-enables the nvram module for Atari.
--- arch/m68k/Kconfig | 3 +++ arch/m68k/atari/nvram.c | 24 ++++++++++++++++++++++++ drivers/char/Kconfig | 2 +- 3 files changed, 28 insertions(+), 1 deletion(-)
arch/m68k/atari/nvram.c +24 -0
@@ -73,6 +73,26 @@ static void __nvram_set_checksum(void)__nvram_write_byte (sum,ATARI_CKS_LOC +1 ); } +static long nvram_set_checksum (void ) +{ +spin_lock_irq (&rtc_lock); +__nvram_set_checksum (); +spin_unlock_irq (&rtc_lock); +return 0 ; +} + +static long nvram_initialize (void ) +{ +loff_t i; + +spin_lock_irq (&rtc_lock); +for (i =0 ; i <NVRAM_BYTES ; ++i) +__nvram_write_byte (0 , i); +__nvram_set_checksum (); +spin_unlock_irq (&rtc_lock); +return 0 ; +} +static ssize_t nvram_read (char *buf,size_t count,loff_t *ppos) {char *p = buf;
@@ -119,6 +139,8 @@ static ssize_t nvram_write(char *buf, sistatic ssize_t nvram_get_size (void ) { +if (!MACH_IS_ATARI ) +return -ENODEV ;return NVRAM_BYTES ; }
@@ -126,6 +148,8 @@ const struct nvram_ops arch_nvram_ops = .read = nvram_read, .write = nvram_write, .get_size = nvram_get_size, + .set_checksum = nvram_set_checksum, + .initialize = nvram_initialize, };EXPORT_SYMBOL (arch_nvram_ops);
drivers/char/Kconfig +1 -1
@@ -247,7 +247,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM + depends on X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM || HAVE_ARCH_NVRAM_OPS ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"),
arch/m68k/Kconfig +3 -0
@@ -71,6 +71,9 @@ config PGTABLE_LEVELS default 2 if SUN3 || COLDFIRE default 3 +config HAVE_ARCH_NVRAM_OPS + def_bool ATARI + source "init/Kconfig" source "kernel/Kconfig.freezer"
RFC v3 11/24 char/nvram: Add "devname:nvram" module alias
In reply to Finn Thain--- drivers/char/nvram.c | 1 + 1 file changed, 1 insertion(+)
drivers/char/nvram.c +1 -0
@@ -577,3 +577,4 @@ module_exit(nvram_module_exit);MODULE_LICENSE ("GPL" );MODULE_ALIAS_MISCDEV (NVRAM_MINOR ); +MODULE_ALIAS ("devname:nvram" );
RFC v3 13/24 powerpc: Add missing ppc_md.nvram_size for CHRP and PowerMac
In reply to Finn ThainAdd the nvram_size() function to those PowerPC platforms that don't already have one: CHRP and PowerMac. This means that the ppc_md.nvram_size() function can be used to implement arch_nvram_ops.get_size()
Since we are addressing inconsistencies here, also rename chrp_nvram_read and chrp_nvram_write, which break the naming convention used across PowerPC platforms for NVRAM accessor functions.
--- arch/powerpc/platforms/chrp/nvram.c | 14 ++++++++++---- arch/powerpc/platforms/powermac/nvram.c | 9 +++++++++ 2 files changed, 19 insertions(+), 4 deletions(-)
arch/powerpc/platforms/chrp/nvram.c +10 -4
@@ -23,7 +23,7 @@ static unsigned int nvram_size;static unsigned char nvram_buf[4 ];static DEFINE_SPINLOCK (nvram_lock); -static unsigned char chrp_nvram_read (int addr) +static unsigned char chrp_nvram_read_byte (int addr) {unsigned int done;unsigned long flags;
@@ -45,7 +45,7 @@ static unsigned char chrp_nvram_read(intreturn ret; } -static void chrp_nvram_write (int addr,unsigned char val) +static void chrp_nvram_write_byte (int addr,unsigned char val) {unsigned int done;unsigned long flags;
@@ -63,6 +63,11 @@ static void chrp_nvram_write(int addr, uspin_unlock_irqrestore (&nvram_lock, flags); } +static ssize_t chrp_nvram_size (void ) +{ +return nvram_size; +} +void __init chrp_nvram_init (void ) {struct device_node *nvram;
@@ -84,8 +89,9 @@ void __init chrp_nvram_init(void)printk (KERN_INFO "CHRP nvram contains %u bytes\n" , nvram_size);of_node_put (nvram); - ppc_md.nvram_read_val = chrp_nvram_read; - ppc_md.nvram_write_val = chrp_nvram_write; + ppc_md.nvram_read_val = chrp_nvram_read_byte; + ppc_md.nvram_write_val = chrp_nvram_write_byte; + ppc_md.nvram_size = chrp_nvram_size;return ; }
arch/powerpc/platforms/powermac/nvram.c +9 -0
@@ -147,6 +147,11 @@ static ssize_t core99_nvram_size(void)static volatile unsigned char __iomem *nvram_addr;static int nvram_mult; +static ssize_t ppc32_nvram_size (void ) +{ +return NVRAM_SIZE ; +} +static unsigned char direct_nvram_read_byte (int addr) {return in_8 (&nvram_data[(addr & (NVRAM_SIZE -1 )) * nvram_mult]);
@@ -590,21 +595,25 @@ int __init pmac_nvram_init(void) nvram_mult =1 ; ppc_md.nvram_read_val = direct_nvram_read_byte; ppc_md.nvram_write_val = direct_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; }else if (nvram_naddrs ==1 ) { nvram_data =ioremap (r1.start, s1); nvram_mult = (s1 +NVRAM_SIZE -1 ) /NVRAM_SIZE ; ppc_md.nvram_read_val = direct_nvram_read_byte; ppc_md.nvram_write_val = direct_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; }else if (nvram_naddrs ==2 ) { nvram_addr =ioremap (r1.start, s1); nvram_data =ioremap (r2.start, s2); ppc_md.nvram_read_val = indirect_nvram_read_byte; ppc_md.nvram_write_val = indirect_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; }else if (nvram_naddrs ==0 && sys_ctrler ==SYS_CTRLER_PMU ) {#ifdef CONFIG_ADB_PMU nvram_naddrs =-1 ; ppc_md.nvram_read_val = pmu_nvram_read_byte; ppc_md.nvram_write_val = pmu_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size;#endif /* CONFIG_ADB_PMU */ }else {printk (KERN_ERR "Incompatible type of NVRAM\n" );
RFC v3 15/24 powerpc: Implement nvram sync ioctl
In reply to Finn ThainAdd the powerpc-specific sync() method to struct nvram_ops and implement the corresponding ioctl in the nvram module. This allows the nvram module to replace the generic_nvram module.
---
On PPC32, the IOC_NVRAM_SYNC ioctl call always returns 0, even for those platforms that don't implement ppc_md.nvram_sync. This patch retains that quirk. It might be better to return failure (which is what PPC64 does).
Changed since v1:
- Don't bother acquiring the mutex for unimplemented ioctls.
--- arch/powerpc/include/asm/nvram.h | 3 --- arch/powerpc/kernel/setup_32.c | 6 +++--- drivers/char/generic_nvram.c | 2 +- drivers/char/nvram.c | 39 +++++++++++++++++++++++++++++++++++++++ include/linux/nvram.h | 4 ++++ 5 files changed, 47 insertions(+), 7 deletions(-)
drivers/char/nvram.c +39 -0
@@ -48,6 +48,11 @@#include <linux/mutex.h> +#ifdef CONFIG_PPC +#include <asm/nvram.h> +#include <asm/machdep.h> +#endif +static DEFINE_MUTEX (nvram_mutex);static DEFINE_SPINLOCK (nvram_state_lock);static int nvram_open_cnt;/* #times opened */
@@ -338,6 +343,37 @@ static long nvram_misc_ioctl(struct filelong ret = -ENOTTY ;switch (cmd) { +#ifdef CONFIG_PPC +#ifdef CONFIG_PPC_PMAC +case OBSOLETE_PMAC_NVRAM_GET_OFFSET : +pr_warn ("nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n" ); +/* fall through */ +case IOC_NVRAM_GET_OFFSET : { +int part, offset; + +if (!machine_is (powermac)) +return -EINVAL ; +if (copy_from_user (&part, + (void __user *)arg,sizeof (part)) !=0 ) +return -EFAULT ; +if (part < pmac_nvram_OF || part > pmac_nvram_NR) +return -EINVAL ; + offset =pmac_get_partition (part); +if (copy_to_user ((void __user *)arg, + &offset,sizeof (offset)) !=0 ) +return -EFAULT ; + ret =0 ; +break ; + } +#endif +case IOC_NVRAM_SYNC : +if (arch_nvram_ops.sync !=NULL ) { +mutex_lock (&nvram_mutex); + ret = arch_nvram_ops.sync (); +mutex_unlock (&nvram_mutex); + } +break ; +#else /* !CONFIG_PPC */ case NVRAM_INIT :/* initialize NVRAM contents and checksum */ if (!capable (CAP_SYS_ADMIN ))
@@ -361,6 +397,7 @@ static long nvram_misc_ioctl(struct file mutex_unlock(&nvram_mutex); }break ; +#endif /* CONFIG_PPC */ }return ret; }
@@ -376,6 +413,7 @@ static int nvram_misc_open(struct inodereturn -EBUSY ; } +#ifndef CONFIG_PPC /* Prevent multiple writers if the set_checksum ioctl is implemented. */ if ((arch_nvram_ops.set_checksum != NULL) && (file->f_mode & FMODE_WRITE) &&
@@ -383,6 +421,7 @@ static int nvram_misc_open(struct inodespin_unlock (&nvram_state_lock); return -EBUSY; } +#endif if (file->f_flags &O_EXCL ) nvram_open_mode |=NVRAM_EXCL ;
include/linux/nvram.h +4 -0
@@ -17,8 +17,12 @@ struct nvram_ops {unsigned char (*read_byte)(int );void (*write_byte)(unsigned char ,int );ssize_t (*get_size)(void ); +#ifdef CONFIG_PPC +long (*sync)(void ); +#else long (*set_checksum)(void );long (*initialize)(void ); +#endif };extern const struct nvram_ops arch_nvram_ops;
arch/powerpc/include/asm/nvram.h +0 -3
@@ -78,9 +78,6 @@ extern int pmac_get_partition(int partitextern u8 pmac_xpram_read (int xpaddr);extern void pmac_xpram_write (int xpaddr,u8 data); -/* Synchronize NVRAM */ -extern void nvram_sync (void ); -/* Initialize NVRAM OS partition */ extern int __init nvram_init_os_partition (struct nvram_os_partition *part);
arch/powerpc/kernel/setup_32.c +3 -3
@@ -170,7 +170,6 @@ __setup("l3cr=", ppc_setup_l3cr);#ifdef CONFIG_GENERIC_NVRAM -/* Generic nvram hooks used by drivers/char/gen_nvram.c */ unsigned char nvram_read_byte (int addr) {if (ppc_md.nvram_read_val)
@@ -193,15 +192,16 @@ static ssize_t ppc_nvram_get_size(void)return -ENODEV ; } -void nvram_sync (void ) +static long ppc_nvram_sync (void ) {if (ppc_md.nvram_sync) ppc_md.nvram_sync (); +return 0 ; } -EXPORT_SYMBOL (nvram_sync);const struct nvram_ops arch_nvram_ops = { .get_size = ppc_nvram_get_size, + .sync = ppc_nvram_sync, };EXPORT_SYMBOL (arch_nvram_ops);
drivers/char/generic_nvram.c +1 -1
@@ -112,7 +112,7 @@ static int nvram_ioctl(struct file *file }#endif /* CONFIG_PPC_PMAC */ case IOC_NVRAM_SYNC : -nvram_sync (); + arch_nvram_ops.sync ();break ;default :return -EINVAL ;
RFC v3 18/24 powerpc: Remove CONFIG_GENERIC_NVRAM and adopt CONFIG_HAVE_ARCH_NVRAM_OPS
In reply to Finn ThainSwitch PPC32 kernels from the generic_nvram module to the nvram module.
Also fix a theoretical bug where CHRP omits the chrp_nvram_init() call when CONFIG_NVRAM_MODULE=m.
As before, when CONFIG_PPC && !CONFIG_PPC_PMAC, the IOC_NVRAM_GET_OFFSET ioctl is unimplemented. For the nvram module, unimplemented ioctls return -ENOTTY. Whereas, for the superseded generic_nvram module they would return -EINVAL.
---
This ioctl change is visible to userspace code but only in an error path. I didn't find any userspace code that uses the IOC_NVRAM_GET_OFFSET ioctl.
The change in the name of the module is also visible. The module that implements /dev/nvram on PowerPC now has suitable aliases, i.e. MODULE_ALIAS_MISCDEV(NVRAM_MINOR); MODULE_ALIAS("devname:nvram");
so that the device special file can be automatically created and the module automatically loaded when needed. Previously this was not the case.
---
Changes since v1:
- Small indentation fix.
--- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/setup_32.c | 2 +- arch/powerpc/platforms/chrp/Makefile | 2 +- arch/powerpc/platforms/chrp/setup.c | 2 +- arch/powerpc/platforms/powermac/setup.c | 3 +-- drivers/char/Kconfig | 10 ++++++---- 6 files changed, 11 insertions(+), 10 deletions(-)
arch/powerpc/Kconfig +1 -1
@@ -178,7 +178,7 @@ config SYSVIPC_COMPAT default y # All PPC32s use generic nvram driver through ppc_md -config GENERIC_NVRAM +config HAVE_ARCH_NVRAM_OPS bool default y if PPC32
arch/powerpc/kernel/setup_32.c +1 -1
@@ -168,7 +168,7 @@ int __init ppc_setup_l3cr(char *str) }__setup ("l3cr=" , ppc_setup_l3cr); -#ifdef CONFIG_GENERIC_NVRAM +#if IS_ENABLED (CONFIG_NVRAM )static unsigned char ppc_nvram_read_byte (int addr) {
arch/powerpc/platforms/chrp/Makefile +1 -1
@@ -1,3 +1,3 @@ obj-y += setup.o time.o pegasos_eth.o pci.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_NVRAM) += nvram.o +obj-$(CONFIG_NVRAM:m=y) += nvram.o
arch/powerpc/platforms/chrp/setup.c +1 -1
@@ -557,7 +557,7 @@ void __init chrp_init_IRQ(void)void __init chrp_init2 (void ) { -#ifdef CONFIG_NVRAM +#if IS_ENABLED (CONFIG_NVRAM )chrp_nvram_init ();#endif
arch/powerpc/platforms/powermac/setup.c +1 -2
@@ -321,8 +321,7 @@ static void __init pmac_setup_arch(void)find_via_pmu ();smu_init (); -#if defined(CONFIG_NVRAM ) || defined(CONFIG_NVRAM_MODULE ) || \ - defined(CONFIG_PPC64 ) +#if IS_ENABLED (CONFIG_NVRAM ) || defined(CONFIG_PPC64 )pmac_nvram_init ();#endif
drivers/char/Kconfig +6 -4
@@ -247,7 +247,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM || HAVE_ARCH_NVRAM_OPS + depends on X86 || (ARM && RTC_DRV_CMOS) || HAVE_ARCH_NVRAM_OPS ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"),
@@ -256,9 +256,11 @@ config NVRAM and most Ataris. The actual number of bytes varies, depending on the nvram in the system, but is usually 114 (128-14 for the RTC). - This memory is conventionally called "CMOS RAM" on PCs and "NVRAM" - on Ataris. /dev/nvram may be used to view settings there, or to - change them (with some utility). It could also be used to frequently + This memory is conventionally called "CMOS RAM" on PCs, + "NVRAM" on Ataris and "PRAM" on Macintoshes. + + /dev/nvram may be used to view settings in NVRAM, or to change them + (with some utility). It could also be used to frequently save a few bits of very important data that may not be lost over power-off and for which writing to disk is too insecure. Note however that most NVRAM space in a PC belongs to the BIOS and you
RFC v3 19/24 char/generic_nvram: Remove as unused
In reply to Finn ThainAnd thus eliminate some twisted CONFIG_GENERIC_NVRAM logic.
--- drivers/char/Makefile | 6 - drivers/char/generic_nvram.c | 176 ------------------------------------------- 2 files changed, 1 insertion(+), 181 deletions(-)
drivers/char/Makefile +1 -5
@@ -30,11 +30,7 @@ obj-$(CONFIG_GEN_RTC) += genrtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o obj-$(CONFIG_DS1302) += ds1302.o obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ -ifeq ($(CONFIG_GENERIC_NVRAM),y) - obj-$(CONFIG_NVRAM) += generic_nvram.o -else - obj-$(CONFIG_NVRAM) += nvram.o -endif +obj-$(CONFIG_NVRAM) += nvram.o obj-$(CONFIG_TOSHIBA) += toshiba.o obj-$(CONFIG_I8K) += i8k.o obj-$(CONFIG_DS1620) += ds1620.o
drivers/char/generic_nvram.c deleted +0 -176
176 lines not on this page · raw message
RFC v3 20/24 powerpc: Adopt nvram module for PPC64
In reply to Finn ThainAdopt nvram module to reduce code duplication.
The IOC_NVRAM_GET_OFFSET ioctl as implemented on PPC64 validates the offset returned by pmac_get_partition(). Add this test to the nvram module.
Note that the old PPC32 generic_nvram module lacked this test. So when CONFIG_PPC32 && CONFIG_PPC_PMAC, the IOC_NVRAM_GET_OFFSET ioctl would have returned 0 (always). But when CONFIG_PPC64 && CONFIG_PPC_PMAC, the IOC_NVRAM_GET_OFFSET ioctl would have returned -1 (which is -EPERM) when the requested partition was not found.
With this patch, the result is now -EINVAL on both PPC32 and PPC64 when the requested PowerMac NVRAM partition is not found.
This is a userspace-visible change, in the non-existent partition case, which would be in an error path for an IOC_NVRAM_GET_OFFSET ioctl syscall.
---
BTW, the IOC_NVRAM_SYNC ioctl call returns -EINVAL on PPC64. This patch retains this behaviour though it might be better to actually perform a sync. Both PPC64 and PPC32 kernels implement ppc_md.nvram_sync() for Core99, but on PPC64 the ioctl is unimplemented (unlike PPC32).
---
Changed since v1:
- The -ENOENT that appeared in v1 was changed to -EINVAL, to be consistent with existing logic, that is,
if (part < pmac_nvram_OF || part > pmac_nvram_NR) return -EINVAL;
--- arch/powerpc/Kconfig | 3 arch/powerpc/kernel/nvram_64.c | 203 ++++--------------------------- arch/powerpc/platforms/powermac/Makefile | 5 arch/powerpc/platforms/powermac/setup.c | 2 drivers/char/nvram.c | 2 5 files changed, 36 insertions(+), 179 deletions(-)
arch/powerpc/Kconfig +1 -2
@@ -177,10 +177,9 @@ config SYSVIPC_COMPAT depends on COMPAT && SYSVIPC default y -# All PPC32s use generic nvram driver through ppc_md config HAVE_ARCH_NVRAM_OPS bool - default y if PPC32 + default y config SCHED_OMIT_FRAME_POINTER bool
arch/powerpc/kernel/nvram_64.c +32 -171
232 lines not on this page · raw message
arch/powerpc/platforms/powermac/Makefile +0 -5
@@ -9,11 +9,6 @@ obj-y += pic.o setup.o time.o feature sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really -# need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really -# CONFIG_NVRAM=y obj-$(CONFIG_NVRAM:m=y) += nvram.o -# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff -obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_PPC32) += bootx_init.o obj-$(CONFIG_SMP) += smp.o
arch/powerpc/platforms/powermac/setup.c +1 -1
@@ -321,7 +321,7 @@ static void __init pmac_setup_arch(void)find_via_pmu ();smu_init (); -#if IS_ENABLED (CONFIG_NVRAM ) || defined(CONFIG_PPC64 ) +#if IS_ENABLED (CONFIG_NVRAM )pmac_nvram_init ();#endif
drivers/char/nvram.c +2 -0
@@ -342,6 +342,8 @@ static long nvram_misc_ioctl(struct fileif (part < pmac_nvram_OF || part > pmac_nvram_NR)return -EINVAL ; offset =pmac_get_partition (part); +if (offset <0 ) +return -EINVAL ;if (copy_to_user ((void __user *)arg, &offset,sizeof (offset)) !=0 )return -EFAULT ;
RFC v3 21/24 m68k/mac: Adopt naming and calling conventions for PRAM routines
In reply to Finn ThainAdopt the existing *_read_byte and *_write_byte naming convention. Rename via_pram_readbyte and via_pram_writebyte to avoid confusion. Adjust calling conventions of mac_pram_* functions to match the arch_nvram_ops struct methods.
---
Changes since v1:
- Don't introduce the arch_nvram_ops struct in this patch, even if it would form a logical progression. Since the struct would get replaced later on, some might see it as churn.
Changes since v2:
- Rename via_pram_send() and via_pram_recv() asvia_rtc_send() and via_rtc_recv() resp.
--- arch/m68k/mac/misc.c | 91 +++++++++++++++++++++++++-------------------------- 1 file changed, 46 insertions(+), 45 deletions(-)
arch/m68k/mac/misc.c +46 -45
@@ -61,7 +61,7 @@ static void cuda_write_time(long data)cuda_poll (); } -static __u8 cuda_read_pram (int offset) +static unsigned char cuda_pram_read_byte (int offset) {struct adb_request req; if (cuda_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
@@ -72,7 +72,7 @@ static __u8 cuda_read_pram(int offset)return req.reply[3 ]; } -static void cuda_write_pram (int offset,__u8 data) +static void cuda_pram_write_byte (unsigned char data,int offset) {struct adb_request req; if (cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
@@ -84,8 +84,8 @@ static void cuda_write_pram(int offset,#else #define cuda_read_time () 0#define cuda_write_time (n) -#define cuda_read_pram NULL -#define cuda_write_pram NULL +#define cuda_pram_read_byte NULL +#define cuda_pram_write_byte NULL#endif #ifdef CONFIG_ADB_PMU68K
@@ -116,7 +116,7 @@ static void pmu_write_time(long data)pmu_poll (); } -static __u8 pmu_read_pram (int offset) +static unsigned char pmu_pram_read_byte (int offset) {struct adb_request req; if (pmu_request(&req, NULL, 3, PMU_READ_NVRAM,
@@ -127,7 +127,7 @@ static __u8 pmu_read_pram(int offset)return req.reply[3 ]; } -static void pmu_write_pram (int offset,__u8 data) +static void pmu_pram_write_byte (unsigned char data,int offset) {struct adb_request req; if (pmu_request(&req, NULL, 4, PMU_WRITE_NVRAM,
@@ -139,8 +139,8 @@ static void pmu_write_pram(int offset, _#else #define pmu_read_time () 0#define pmu_write_time (n) -#define pmu_read_pram NULL -#define pmu_write_pram NULL +#define pmu_pram_read_byte NULL +#define pmu_pram_write_byte NULL#endif #if 0 /* def CONFIG_ADB_MACIISI */
@@ -169,7 +169,7 @@ static void maciisi_write_time(long data (data >> 8) & 0xFF, data & 0xFF); } -static __u8 maciisi_read_pram (int offset) +static unsigned char maciisi_pram_read_byte (int offset) {struct adb_request req; if (maciisi_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
@@ -178,7 +178,7 @@ static __u8 maciisi_read_pram(int offsetreturn req.reply[3 ]; } -static void maciisi_write_pram (int offset,__u8 data) +static void maciisi_pram_write_byte (unsigned char data,int offset) {struct adb_request req; maciisi_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
@@ -187,8 +187,8 @@ static void maciisi_write_pram(int offse#else #define maciisi_read_time () 0#define maciisi_write_time (n) -#define maciisi_read_pram NULL -#define maciisi_write_pram NULL +#define maciisi_pram_read_byte NULL +#define maciisi_pram_write_byte NULL#endif /*
@@ -198,7 +198,7 @@ static void maciisi_write_pram(int offse* the RTC should be enabled. */ -static __u8 via_pram_readbyte (void ) +static __u8 via_rtc_recv (void ) {int i,reg;__u8 data;
@@ -225,7 +225,7 @@ static __u8 via_pram_readbyte(void)return data; } -static void via_pram_writebyte (__u8 data) +static void via_rtc_send (__u8 data) {int i,reg,bit;
@@ -262,17 +262,17 @@ static void via_pram_command(int command via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;if (command &0xFF00 ) {/* extended (two-byte) command */ -via_pram_writebyte ((command &0xFF00 ) >>8 ); -via_pram_writebyte (command &0xFF ); +via_rtc_send ((command &0xFF00 ) >>8 ); +via_rtc_send (command &0xFF ); is_read = command &0x8000 ; }else {/* one-byte command */ -via_pram_writebyte (command); +via_rtc_send (command); is_read = command &0x80 ; }if (is_read) { - *data =via_pram_readbyte (); + *data =via_rtc_recv (); }else { -via_pram_writebyte (*data); +via_rtc_send (*data); }/* All done, disable the RTC */
@@ -282,12 +282,12 @@ static void via_pram_command(int commandlocal_irq_restore (flags); } -static __u8 via_read_pram (int offset) +static unsigned char via_pram_read_byte (int offset) {return 0 ; } -static void via_write_pram (int offset,__u8 data) +static void via_pram_write_byte (unsigned char data,int offset) { }
@@ -453,50 +453,51 @@ void pmu_shutdown(void)*------------------------------------------------------------------- */ -void mac_pram_read (int offset,__u8 *buffer,int len) +unsigned char mac_pram_read_byte (int addr) { -__u8 (*func)(int); -int i; +unsigned char (*func)(int );switch (macintosh_config->adb_type) {case MAC_ADB_IISI : - func = maciisi_read_pram;break ; + func = maciisi_pram_read_byte; +break ;case MAC_ADB_PB1 :case MAC_ADB_PB2 : - func = pmu_read_pram;break ; + func = pmu_pram_read_byte; +break ;case MAC_ADB_CUDA : - func = cuda_read_pram;break ; + func = cuda_pram_read_byte; +break ;default : - func = via_read_pram; - } -if (!func) -return ; -for (i =0 ; i < len ; i++) { - buffer[i] = (*func)(offset++); + func = via_pram_read_byte; } + +if (func) +return (*func)(addr); +return 0xff ; } -void mac_pram_write (int offset,__u8 *buffer,int len) +void mac_pram_write_byte (unsigned char val,int addr) { -void (*func)(int ,__u8 ); -int i; +void (*func)(unsigned char ,int );switch (macintosh_config->adb_type) {case MAC_ADB_IISI : - func = maciisi_write_pram;break ; + func = maciisi_pram_write_byte; +break ;case MAC_ADB_PB1 :case MAC_ADB_PB2 : - func = pmu_write_pram;break ; + func = pmu_pram_write_byte; +break ;case MAC_ADB_CUDA : - func = cuda_write_pram;break ; + func = cuda_pram_write_byte; +break ;default : - func = via_write_pram; - } -if (!func) -return ; -for (i =0 ; i < len ; i++) { - (*func)(offset++, buffer[i]); + func = via_pram_write_byte; } + +if (func) + (*func)(val, addr); }void mac_poweroff (void )
RFC v3 22/24 m68k/mac: Use macros for RTC accesses not magic numbers
In reply to Finn Thain---
This is intended to improve code style and not affect code behaviour. I've tested this on a Quadra 650.
I don't know the meanings of the 4 undocumented write protect register bits 0x55, so I decided against defining 4 macros for those bits.
--- arch/m68k/mac/misc.c | 59 +++++++++++++++++++++++++++++++++++---------------- 1 file changed, 41 insertions(+), 18 deletions(-)
arch/m68k/mac/misc.c +41 -18
@@ -242,6 +242,21 @@ static void via_rtc_send(__u8 data) }/* +* These values can be found in Inside Macintosh vol. III ch. 2 +* which has a description of the RTC chip in the original Mac. +*/ + +#define RTC_FLG_READ BIT(7) +#define RTC_FLG_WRITE_PROTECT BIT(7) +#define RTC_CMD_READ (r) (RTC_FLG_READ | (r << 2)) +#define RTC_CMD_WRITE (r) (r << 2) +#define RTC_REG_SECONDS_0 0 +#define RTC_REG_SECONDS_1 1 +#define RTC_REG_SECONDS_2 2 +#define RTC_REG_SECONDS_3 3 +#define RTC_REG_WRITE_PROTECT 13 + +/* * Execute a VIA PRAM/RTC command. For read commands * data should point to a one-byte buffer for the * resulting data. For write commands it should point
@@ -250,13 +265,17 @@ static void via_rtc_send(__u8 data)* This function disables all interrupts while running. */ -static void via_pram_command (int command,__u8 *data) +static void via_rtc_command (int command,__u8 *data) {unsigned long flags;int is_read;local_irq_save (flags); +/* The least significant bits must be 0b01 according to Inside Mac */ + + command = (command & ~3 ) |1 ; +/* Enable the RTC and make sure the strobe line is high */ via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
@@ -264,10 +283,10 @@ static void via_pram_command(int commandif (command &0xFF00 ) {/* extended (two-byte) command */ via_rtc_send ((command &0xFF00 ) >>8 );via_rtc_send (command &0xFF ); - is_read = command &0x8000 ; + is_read = command & (RTC_FLG_READ <<8 ); }else {/* one-byte command */ via_rtc_send (command); - is_read = command &0x80 ; + is_read = command &RTC_FLG_READ ; }if (is_read) { *data =via_rtc_recv ();
@@ -306,10 +325,10 @@ static long via_read_time(void) } result, last_result;int count =1 ; -via_pram_command (0x81 , &last_result.cdata[3 ]); -via_pram_command (0x85 , &last_result.cdata[2 ]); -via_pram_command (0x89 , &last_result.cdata[1 ]); -via_pram_command (0x8D , &last_result.cdata[0 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_0 ), &last_result.cdata[3 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_1 ), &last_result.cdata[2 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_2 ), &last_result.cdata[1 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_3 ), &last_result.cdata[0 ]);/* * The NetBSD guys say to loop until you get the same reading
@@ -317,10 +336,14 @@ static long via_read_time(void)*/ while (1 ) { -via_pram_command (0x81 , &result.cdata[3 ]); -via_pram_command (0x85 , &result.cdata[2 ]); -via_pram_command (0x89 , &result.cdata[1 ]); -via_pram_command (0x8D , &result.cdata[0 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_0 ), + &result.cdata[3 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_1 ), + &result.cdata[2 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_2 ), + &result.cdata[1 ]); +via_rtc_command (RTC_CMD_READ (RTC_REG_SECONDS_3 ), + &result.cdata[0 ]);if (result.idata == last_result.idata)return result.idata -RTC_OFFSET ;
@@ -356,18 +379,18 @@ static void via_write_time(long time)/* Clear the write protect bit */ temp =0x55 ; -via_pram_command (0x35 , &temp); +via_rtc_command (RTC_CMD_WRITE (RTC_REG_WRITE_PROTECT ), &temp); data.idata = time +RTC_OFFSET ; -via_pram_command (0x01 , &data.cdata[3 ]); -via_pram_command (0x05 , &data.cdata[2 ]); -via_pram_command (0x09 , &data.cdata[1 ]); -via_pram_command (0x0D , &data.cdata[0 ]); +via_rtc_command (RTC_CMD_WRITE (RTC_REG_SECONDS_0 ), &data.cdata[3 ]); +via_rtc_command (RTC_CMD_WRITE (RTC_REG_SECONDS_1 ), &data.cdata[2 ]); +via_rtc_command (RTC_CMD_WRITE (RTC_REG_SECONDS_2 ), &data.cdata[1 ]); +via_rtc_command (RTC_CMD_WRITE (RTC_REG_SECONDS_3 ), &data.cdata[0 ]);/* Set the write protect bit */ - temp =0xD5 ; -via_pram_command (0x35 , &temp); + temp =0x55 |RTC_FLG_WRITE_PROTECT ; +via_rtc_command (RTC_CMD_WRITE (RTC_REG_WRITE_PROTECT ), &temp); }static void via_shutdown (void )
RFC v3 24/24 m68k: Dispatch nvram_ops calls to Atari or Mac functions
In reply to Finn ThainA multi-platform kernel binary needs to decide at run-time how to dispatch the arch_nvram_ops calls. Add platform-independent arch_nvram_ops, for use when multiple platform-specific NVRAM ops implementations are needed.
Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs.
---
Changed since v1:
- Removed Mac and Atari ops struct definitions and the associated #ifdefs.
- Moved extern declarations for fewer lines of code and better readability.
- The IS_ENABLED(CONFIG_NVRAM) tests were moved to this patch, because it is now in this patch that CONFIG_HAVE_ARCH_NVRAM_OPS is enabled for Macs.
--- arch/m68k/Kconfig | 2 arch/m68k/atari/nvram.c | 21 ++------ arch/m68k/kernel/setup_mm.c | 107 ++++++++++++++++++++++++++++++++++++++++++++ arch/m68k/mac/misc.c | 18 +++++++ 4 files changed, 131 insertions(+), 17 deletions(-)
arch/m68k/mac/misc.c +18 -0
@@ -61,6 +61,7 @@ static void cuda_write_time(long data)cuda_poll (); } +#if IS_ENABLED (CONFIG_NVRAM )static unsigned char cuda_pram_read_byte (int offset) {struct adb_request req;
@@ -81,6 +82,8 @@ static void cuda_pram_write_byte(unsignewhile (!req.complete) cuda_poll(); } +#endif /* CONFIG_NVRAM */ +#else #define cuda_read_time () 0#define cuda_write_time (n)
@@ -116,6 +119,7 @@ static void pmu_write_time(long data)pmu_poll (); } +#if IS_ENABLED (CONFIG_NVRAM )static unsigned char pmu_pram_read_byte (int offset) {struct adb_request req;
@@ -139,6 +143,8 @@ static void pmu_pram_write_byte(unsignedwhile (!req.complete) pmu_poll(); } +#endif /* CONFIG_NVRAM */ +#else #define pmu_read_time () 0#define pmu_write_time (n)
@@ -172,6 +178,7 @@ static void maciisi_write_time(long data (data >> 8) & 0xFF, data & 0xFF); } +#if IS_ENABLED (CONFIG_NVRAM )static unsigned char maciisi_pram_read_byte (int offset) {struct adb_request req;
@@ -187,6 +194,8 @@ static void maciisi_pram_write_byte(unsimaciisi_request (&req,NULL ,5 ,CUDA_PACKET ,CUDA_SET_PRAM , (offset >> 8) & 0xFF, offset & 0xFF, data); } +#endif /* CONFIG_NVRAM */ +#else #define maciisi_read_time () 0#define maciisi_write_time (n)
@@ -314,6 +323,7 @@ static void via_rtc_command(int command,local_irq_restore (flags); } +#if IS_ENABLED (CONFIG_NVRAM )static unsigned char via_pram_read_byte (int offset) {unsigned char temp;
@@ -336,6 +346,7 @@ static void via_pram_write_byte(unsigned temp =0x55 |RTC_FLG_WRITE_PROTECT ; via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp); } +#endif /* CONFIG_NVRAM */ /* * Return the current time in seconds since January 1, 1904.
@@ -503,6 +514,7 @@ void pmu_shutdown(void)*------------------------------------------------------------------- */ +#if IS_ENABLED (CONFIG_NVRAM )unsigned char mac_pram_read_byte (int addr) {unsigned char (*func)(int );
@@ -550,6 +562,12 @@ void mac_pram_write_byte(unsigned char v (*func)(val, addr); } +ssize_t mac_pram_get_size (void ) +{ +return 256 ; +} +#endif /* CONFIG_NVRAM */ +void mac_poweroff (void ) {/*
arch/m68k/atari/nvram.c +5 -16
@@ -73,7 +73,7 @@ static void __nvram_set_checksum(void)__nvram_write_byte (sum,ATARI_CKS_LOC +1 ); } -static long nvram_set_checksum (void ) +long atari_nvram_set_checksum (void ) {spin_lock_irq (&rtc_lock);__nvram_set_checksum ();
@@ -81,7 +81,7 @@ static long nvram_set_checksum(void)return 0 ; } -static long nvram_initialize (void ) +long atari_nvram_initialize (void ) {loff_t i;
@@ -93,7 +93,7 @@ static long nvram_initialize(void)return 0 ; } -static ssize_t nvram_read (char *buf,size_t count,loff_t *ppos) +ssize_t atari_nvram_read (char *buf,size_t count,loff_t *ppos) {char *p = buf;loff_t i;
@@ -114,7 +114,7 @@ static ssize_t nvram_read(char *buf, sizreturn p - buf; } -static ssize_t nvram_write (char *buf,size_t count,loff_t *ppos) +ssize_t atari_nvram_write (char *buf,size_t count,loff_t *ppos) {char *p = buf;loff_t i;
@@ -137,22 +137,11 @@ static ssize_t nvram_write(char *buf, sireturn p - buf; } -static ssize_t nvram_get_size (void ) +ssize_t atari_nvram_get_size (void ) { -if (!MACH_IS_ATARI ) -return -ENODEV ;return NVRAM_BYTES ; } -const struct nvram_ops arch_nvram_ops = { - .read = nvram_read, - .write = nvram_write, - .get_size = nvram_get_size, - .set_checksum = nvram_set_checksum, - .initialize = nvram_initialize, -}; -EXPORT_SYMBOL (arch_nvram_ops); - #ifdef CONFIG_PROC_FS static struct { unsigned char val;
arch/m68k/kernel/setup_mm.c +107 -0
116 lines not on this page · raw message
arch/m68k/Kconfig +1 -1
@@ -72,7 +72,7 @@ config PGTABLE_LEVELS default 3 config HAVE_ARCH_NVRAM_OPS - def_bool ATARI + def_bool ATARI || MAC source "init/Kconfig"
RFC v3 17/24 nvram: Drop nvram_* symbol exports and prototypes
In reply to Finn ThainDrivers now use the arch_nvram_ops calls so remove the function exports and prototypes. nvram_check_checksum() is unused so remove it.
--- arch/m68k/atari/nvram.c | 6 +++--- drivers/char/nvram.c | 27 +++++---------------------- include/linux/nvram.h | 8 -------- 3 files changed, 8 insertions(+), 33 deletions(-)
drivers/char/nvram.c +5 -22
@@ -82,13 +82,12 @@ static ssize_t nvram_size;* periodic 11 min sync from kernel/time/ntp.c vs. this driver.) */ -unsigned char __nvram_read_byte (int i) +static unsigned char __nvram_read_byte (int i) {return CMOS_READ (NVRAM_FIRST_BYTE + i); } -EXPORT_SYMBOL (__nvram_read_byte); -unsigned char nvram_read_byte (int i) +static unsigned char nvram_read_byte (int i) {unsigned long flags;unsigned char c;
@@ -98,16 +97,14 @@ unsigned char nvram_read_byte(int i)spin_unlock_irqrestore (&rtc_lock, flags);return c; } -EXPORT_SYMBOL (nvram_read_byte);/* This races nicely with trying to read with checksum checking (nvram_read) */ -void __nvram_write_byte (unsigned char c,int i) +static void __nvram_write_byte (unsigned char c,int i) {CMOS_WRITE (c,NVRAM_FIRST_BYTE + i); } -EXPORT_SYMBOL (__nvram_write_byte); -void nvram_write_byte (unsigned char c,int i) +static void nvram_write_byte (unsigned char c,int i) {unsigned long flags;
@@ -115,14 +112,13 @@ void nvram_write_byte(unsigned char c, i__nvram_write_byte (c, i);spin_unlock_irqrestore (&rtc_lock, flags); } -EXPORT_SYMBOL (nvram_write_byte);/* On PCs, the checksum is built only over bytes 2..31 */ #define PC_CKS_RANGE_START 2#define PC_CKS_RANGE_END 31#define PC_CKS_LOC 32 -int __nvram_check_checksum (void ) +static int __nvram_check_checksum (void ) {int i;unsigned short sum =0 ;
@@ -134,19 +130,6 @@ int __nvram_check_checksum(void)__nvram_read_byte (PC_CKS_LOC +1 );return (sum &0xffff ) == expect; } -EXPORT_SYMBOL (__nvram_check_checksum); - -int nvram_check_checksum (void ) -{ -unsigned long flags; -int rv; - -spin_lock_irqsave (&rtc_lock, flags); - rv =__nvram_check_checksum (); -spin_unlock_irqrestore (&rtc_lock, flags); -return rv; -} -EXPORT_SYMBOL (nvram_check_checksum);static void __nvram_set_checksum (void ) {
include/linux/nvram.h +0 -8
@@ -3,14 +3,6 @@#include <uapi/linux/nvram.h> -/* __foo is foo without grabbing the rtc_lock - get it yourself */ -extern unsigned char __nvram_read_byte (int i); -extern unsigned char nvram_read_byte (int i); -extern void __nvram_write_byte (unsigned char c,int i); -extern void nvram_write_byte (unsigned char c,int i); -extern int __nvram_check_checksum (void ); -extern int nvram_check_checksum (void ); -struct nvram_ops {ssize_t (*read)(char *,size_t ,loff_t *);ssize_t (*write)(char *,size_t ,loff_t *);
arch/m68k/atari/nvram.c +3 -3
@@ -33,13 +33,13 @@* periodic 11 min sync from kernel/time/ntp.c vs. this driver.) */ -unsigned char __nvram_read_byte (int i) +static unsigned char __nvram_read_byte (int i) {return CMOS_READ (NVRAM_FIRST_BYTE + i); }/* This races nicely with trying to read with checksum checking */ -void __nvram_write_byte (unsigned char c,int i) +static void __nvram_write_byte (unsigned char c,int i) {CMOS_WRITE (c,NVRAM_FIRST_BYTE + i); }
@@ -51,7 +51,7 @@ void __nvram_write_byte(unsigned char c,#define ATARI_CKS_RANGE_END 47#define ATARI_CKS_LOC 48 -int __nvram_check_checksum (void ) +static int __nvram_check_checksum (void ) {int i;unsigned char sum =0 ;
Geert Uytterhoeven
maintainerRe: [RFC v3 24/24] m68k: Dispatch nvram_ops calls to Atari or Mac functions
In reply to Finn ThainHi Finn,
Quoted 5 lines
A multi-platform kernel binary needs to decide at run-time how to dispatch the
arch_nvram_opscalls. Add platform-independentarch_nvram_ops, for use when multiple platform-specific NVRAM ops implementations are needed.Enable
CONFIG_HAVE_ARCH_NVRAM_OPSfor Macs.
Thanks for your patch!
Quoted 8 lines · Finn Thain
arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:27.000000000 +1000 +1
-0@@ -568,3 +569,109 @@ static int __init adb_probe_sync_enable __setup("adb_sync", adb_probe_sync_enable); #endif /* CONFIG_ADB */ +
arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:56.000000000 +1000 static int __init adb_probe_sync_enable · line 582
Quoted 10 lines
arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:27.000000000 +1000 +10
-0+#if IS_ENABLED(CONFIG_NVRAM) +extern unsigned char mac_pram_read_byte(int); +extern void mac_pram_write_byte(unsigned char, int); +extern ssize_t mac_pram_get_size(void); + +extern ssize_t atari_nvram_read(char *, size_t, loff_t *); +extern ssize_t atari_nvram_write(char *, size_t, loff_t *); +extern long atari_nvram_set_checksum(void); +extern long atari_nvram_initialize(void); +extern ssize_t atari_nvram_get_size(void);
Forward declarations belong in a header file, to be included by both producers and consumers.
arch/m68k/Kconfig 2015-06-28 11:41:56.000000000 +1000 config PGTABLE_LEVELS · line 75
Quoted 8 lines
arch/m68k/Kconfig 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/Kconfig 2015-06-28 11:41:39.000000000 +1000 +1
-1@@ -72,7 +72,7 @@ config PGTABLE_LEVELS default 3 config HAVE_ARCH_NVRAM_OPS - def_bool ATARI + def_bool ATARI || MAC
For maintainability, it's better to just have "bool" here, and let both the ATARI and MAC config symbols select HAVE_ARCH_NVRAM_OPS.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Geert Uytterhoeven
maintainerRe: [RFC v3 02/24] m68k/atari: Move Atari-specific code out of drivers/char/nvram.c
In reply to Finn ThainHi Finn,
Quoted 2 lines · Finn Thain
Change the vmode calculation from logical OR to bitwise OR, since it is obviously wrong.
Ideally, that should be a separate patch we can put on the fast track.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Re: [RFC v3 02/24] m68k/atari: Move Atari-specific code out of drivers/char/nvram.c
Quoted 8 lines · Geert Uytterhoeven
Hi Finn,
Quoted 2 lines · Finn Thain
Change the vmode calculation from logical OR to bitwise OR, since it is obviously wrong.
Ideally, that should be a separate patch we can put on the fast track.
If you will fast track a portion of this patch series, that's great. I'll send a separate patch. (However, IMHO, that portion which would ideally be fast tracked is a matter of opinion.)
Quoted 5 lines
Gr{oetje,eeting}s,
Geert
Re: [RFC v3 24/24] m68k: Dispatch nvram_ops calls to Atari or Mac functions
In reply to Geert UytterhoevenQuoted 7 lines · Geert Uytterhoeven
Quoted 5 lines · Finn Thain
arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:27.000000000 +1000 +0
-0@@ -568,3 +569,109 @@ static int __init adb_probe_sync_enable
Quoted 16 lines
arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:56.000000000 +1000 static int __init adb_probe_sync_enable · line 582
Quoted 13 lines
arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/kernel/setup_mm.c 2015-06-28 11:41:27.000000000 +1000 +11
-0__setup("adb_sync", adb_probe_sync_enable); #endif /* CONFIG_ADB */ + +#if IS_ENABLED(CONFIG_NVRAM) +extern unsigned char mac_pram_read_byte(int); +extern void mac_pram_write_byte(unsigned char, int); +extern ssize_t mac_pram_get_size(void); + +extern ssize_t atari_nvram_read(char *, size_t, loff_t *); +extern ssize_t atari_nvram_write(char *, size_t, loff_t *); +extern long atari_nvram_set_checksum(void); +extern long atari_nvram_initialize(void); +extern ssize_t atari_nvram_get_size(void);Forward declarations belong in a header file, to be included by both producers and consumers.
Right, will fix. (That was how the v1 patch did this. Looks like I messed it up.)
Quoted 6 lines
Quoted 6 lines
arch/m68k/Kconfig 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/Kconfig 2015-06-28 11:41:39.000000000 +1000 +0
-0@@ -72,7 +72,7 @@ config PGTABLE_LEVELS default 3
Quoted 6 lines
arch/m68k/Kconfig 2015-06-28 11:41:56.000000000 +1000 config PGTABLE_LEVELS · line 75
Quoted 3 lines
arch/m68k/Kconfig 2015-06-28 11:41:56.000000000 +1000 renamed from arch/m68k/Kconfig 2015-06-28 11:41:39.000000000 +1000 +1
-1config HAVE_ARCH_NVRAM_OPS - def_bool ATARI + def_bool ATARI || MACFor maintainability, it's better to just have "bool" here, and let both the ATARI and MAC config symbols select
HAVE_ARCH_NVRAM_OPS.
OK, will fix.
Thanks for your review.
Quoted 5 lines
Gr{oetje,eeting}s,
Geert