4.1.2-stable review

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede <[email protected]>

commit 8bf1b9b3d90194a174493febc731f7783f2adf1a upstream.

The touchscreen controller in the A13 and later has a different temperature curve than the one in the original A10, change the compatible for the A13 and later so that the kernel will use the correct curve.

---
 arch/arm/boot/dts/sun5i-a10s.dtsi |    2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi  |    2 +-
 arch/arm/boot/dts/sun7i-a20.dtsi  |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

@@ -573,7 +573,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 			#thermal-sensor-cells = <0>;

@@ -555,7 +555,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 			#thermal-sensor-cells = <0>;

@@ -1042,7 +1042,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			#thermal-sensor-cells = <0>;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bandan Das <[email protected]>

commit f104765b4f81fd74d69e0eb161e89096deade2db upstream.

If hardware doesn't support DecodeAssist - a feature that provides more information about the intercept in the VMCB, KVM decodes the instruction and then updates the next_rip vmcb control field. However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS]. Since skip_emulated_instruction() doesn't verify nrip support before accepting control.next_rip as valid, avoid writing this field if support isn't present.

---
 arch/x86/kvm/svm.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -511,8 +511,10 @@ static void skip_emulated_instruction(st
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (svm->vmcb->control.next_rip != 0)
+	if (svm->vmcb->control.next_rip != 0) {
+		WARN_ON(!static_cpu_has(X86_FEATURE_NRIPS));
 		svm->next_rip = svm->vmcb->control.next_rip;
+	}
 
 	if (!svm->next_rip) {
 		if (emulate_instruction(vcpu, EMULTYPE_SKIP) !=

@@ -4317,7 +4319,9 @@ static int svm_check_intercept(struct kv
 		break;
 	}
 
-	vmcb->control.next_rip  = info->next_rip;
+	/* TODO: Advertise NRIPS to guest hypervisor unconditionally */
+	if (static_cpu_has(X86_FEATURE_NRIPS))
+		vmcb->control.next_rip  = info->next_rip;
 	vmcb->control.exit_code = icpt_info.exit_code;
 	vmexit = nested_svm_exit_handled(svm);
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stas Sergeev <[email protected]>

[ Upstream commit 538761b794c1542f1c6e31eadd9d7aae118889f7 ]

The commit 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state signaling")
changed mvneta_adjust_link() so that it does not clear the auto-negotiation bits in MVNETA_GMAC_AUTONEG_CONFIG register. This was necessary for auto-negotiation mode to work.
Unfortunately I haven't checked if these bits are ever initialized. It appears they are not.
This patch adds the missing initialization of the auto-negotiation bits in the MVNETA_GMAC_AUTONEG_CONFIG register.
It fixes the following regression:
https://www.mail-archive.com/[email protected]/msg67928.html

Since the patch was tested to fix a regression, it should be applied to stable tree.

---
 drivers/net/ethernet/marvell/mvneta.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -1013,6 +1013,12 @@ static void mvneta_defaults_set(struct m
 		val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
 		val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
 		mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+	} else {
+		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+		val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+		       MVNETA_GMAC_AN_SPEED_EN |
+		       MVNETA_GMAC_AN_DUPLEX_EN);
+		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
 	}
 
 	mvneta_set_ucast_table(pp, -1);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Paasch <[email protected]>

[ Upstream commit dfea2aa654243f70dc53b8648d0bbdeec55a7df1 ]

tcp_fastopen_reset_cipher really cannot be called from interrupt context. It allocates the tcp_fastopen_context with GFP_KERNEL and calls crypto_alloc_cipher, which allocates all kind of stuff with GFP_KERNEL.

Thus, we might sleep when the key-generation is triggered by an incoming TFO cookie-request which would then happen in interrupt- context, as shown by enabling CONFIG_DEBUG_ATOMIC_SLEEP:

[   36.001813] BUG: sleeping function called from invalid context at mm/slub.c:1266
[   36.003624] in_atomic(): 1, irqs_disabled(): 0, pid: 1016, name: packetdrill
[   36.004859] CPU: 1 PID: 1016 Comm: packetdrill Not tainted 4.1.0-rc7 #14
[   36.006085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[   36.008250]  00000000000004f2 ffff88007f8838a8 ffffffff8171d53a ffff880075a084a8
[   36.009630]  ffff880075a08000 ffff88007f8838c8 ffffffff810967d3 ffff88007f883928
[   36.011076]  0000000000000000 ffff88007f8838f8 ffffffff81096892 ffff88007f89be00
[   36.012494] Call Trace:
[   36.012953]  <IRQ>  [<ffffffff8171d53a>] dump_stack+0x4f/0x6d
[   36.014085]  [<ffffffff810967d3>] ___might_sleep+0x103/0x170
[   36.015117]  [<ffffffff81096892>] __might_sleep+0x52/0x90
[   36.016117]  [<ffffffff8118e887>] kmem_cache_alloc_trace+0x47/0x190
[   36.017266]  [<ffffffff81680d82>] ? tcp_fastopen_reset_cipher+0x42/0x130
[   36.018485]  [<ffffffff81680d82>] tcp_fastopen_reset_cipher+0x42/0x130
[   36.019679]  [<ffffffff81680f01>] tcp_fastopen_init_key_once+0x61/0x70
[   36.020884]  [<ffffffff81680f2c>] __tcp_fastopen_cookie_gen+0x1c/0x60
[   36.022058]  [<ffffffff816814ff>] tcp_try_fastopen+0x58f/0x730
[   36.023118]  [<ffffffff81671788>] tcp_conn_request+0x3e8/0x7b0
[   36.024185]  [<ffffffff810e3872>] ? __module_text_address+0x12/0x60
[   36.025327]  [<ffffffff8167b2e1>] tcp_v4_conn_request+0x51/0x60
[   36.026410]  [<ffffffff816727e0>] tcp_rcv_state_process+0x190/0xda0
[   36.027556]  [<ffffffff81661f97>] ? __inet_lookup_established+0x47/0x170
[   36.028784]  [<ffffffff8167c2ad>] tcp_v4_do_rcv+0x16d/0x3d0
[   36.029832]  [<ffffffff812e6806>] ? security_sock_rcv_skb+0x16/0x20
[   36.030936]  [<ffffffff8167cc8a>] tcp_v4_rcv+0x77a/0x7b0
[   36.031875]  [<ffffffff816af8c3>] ? iptable_filter_hook+0x33/0x70
[   36.032953]  [<ffffffff81657d22>] ip_local_deliver_finish+0x92/0x1f0
[   36.034065]  [<ffffffff81657f1a>] ip_local_deliver+0x9a/0xb0
[   36.035069]  [<ffffffff81657c90>] ? ip_rcv+0x3d0/0x3d0
[   36.035963]  [<ffffffff81657569>] ip_rcv_finish+0x119/0x330
[   36.036950]  [<ffffffff81657ba7>] ip_rcv+0x2e7/0x3d0
[   36.037847]  [<ffffffff81610652>] __netif_receive_skb_core+0x552/0x930
[   36.038994]  [<ffffffff81610a57>] __netif_receive_skb+0x27/0x70
[   36.040033]  [<ffffffff81610b72>] process_backlog+0xd2/0x1f0
[   36.041025]  [<ffffffff81611482>] net_rx_action+0x122/0x310
[   36.042007]  [<ffffffff81076743>] __do_softirq+0x103/0x2f0
[   36.042978]  [<ffffffff81723e3c>] do_softirq_own_stack+0x1c/0x30

This patch moves the call to tcp_fastopen_init_key_once to the places where a listener socket creates its TFO-state, which always happens in user-context (either from the setsockopt, or implicitly during the listen()-call)

---
 net/ipv4/af_inet.c      |    2 ++
 net/ipv4/tcp.c          |    7 +++++--
 net/ipv4/tcp_fastopen.c |    2 --
 3 files changed, 7 insertions(+), 4 deletions(-)

@@ -228,6 +228,8 @@ int inet_listen(struct socket *sock, int
 				err = 0;
 			if (err)
 				goto out;
+
+			tcp_fastopen_init_key_once(true);
 		}
 		err = inet_csk_listen_start(sk, backlog);
 		if (err)

@@ -2545,10 +2545,13 @@ static int do_tcp_setsockopt(struct sock
 
 	case TCP_FASTOPEN:
 		if (val >= 0 && ((1 << sk->sk_state) & (TCPF_CLOSE |
-		    TCPF_LISTEN)))
+		    TCPF_LISTEN))) {
+			tcp_fastopen_init_key_once(true);
+
 			err = fastopen_init_queue(sk, val);
-		else
+		} else {
 			err = -EINVAL;
+		}
 		break;
 	case TCP_TIMESTAMP:
 		if (!tp->repair)

@@ -78,8 +78,6 @@ static bool __tcp_fastopen_cookie_gen(co
 	struct tcp_fastopen_context *ctx;
 	bool ok = false;
 
-	tcp_fastopen_init_key_once(true);
-
 	rcu_read_lock();
 	ctx = rcu_dereference(tcp_fastopen_ctx);
 	if (ctx) {

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Horia Geant? <[email protected]>

commit 5fa7dadc898567ce14d6d6d427e7bd8ce6eb5d39 upstream.

---
 drivers/crypto/talitos.c |    1 +
 1 file changed, 1 insertion(+)

@@ -2561,6 +2561,7 @@ static struct talitos_crypto_alg *talito
 		break;
 	default:
 		dev_err(dev, "unknown algorithm type %d\n", t_alg->algt.type);
+		kfree(t_alg);
 		return ERR_PTR(-EINVAL);
 	}
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joerg Roedel <[email protected]>

commit 0b3fff54bc01e8e6064d222a33e6fa7adabd94cd upstream.

Make sure that we are skipping over large PTEs while walking the page-table tree.

---
 drivers/iommu/amd_iommu.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -1869,9 +1869,15 @@ static void free_pt_##LVL (unsigned long
 	pt = (u64 *)__pt;					\
 								\
 	for (i = 0; i < 512; ++i) {				\
+		/* PTE present? */				\
 		if (!IOMMU_PTE_PRESENT(pt[i]))			\
 			continue;				\
 								\
+		/* Large PTE? */				\
+		if (PM_PTE_LEVEL(pt[i]) == 0 ||			\
+		    PM_PTE_LEVEL(pt[i]) == 7)			\
+			continue;				\
+								\
 		p = (unsigned long)IOMMU_PTE_PAGE(pt[i]);	\
 		FN(p);						\
 	}							\

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenzo Pieralisi <[email protected]>

commit e2d997366dc5b6c9d14035867f73957f93e7578c upstream.

According to the PSCI specification and the SMC/HVC calling convention, PSCI function_ids that are not implemented must return NOT_SUPPORTED as return value.

Current KVM implementation takes an unhandled PSCI function_id as an error and injects an undefined instruction into the guest if PSCI implementation is called with a function_id that is not handled by the resident PSCI version (ie it is not implemented), which is not the behaviour expected by a guest when calling a PSCI function_id that is not implemented.

This patch fixes this issue by returning NOT_SUPPORTED whenever the kvm PSCI call is executed for a function_id that is not implemented by the PSCI kvm layer.

---
 arch/arm/kvm/psci.c |   16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

@@ -230,10 +230,6 @@ static int kvm_psci_0_2_call(struct kvm_
 	case PSCI_0_2_FN64_AFFINITY_INFO:
 		val = kvm_psci_vcpu_affinity_info(vcpu);
 		break;
-	case PSCI_0_2_FN_MIGRATE:
-	case PSCI_0_2_FN64_MIGRATE:
-		val = PSCI_RET_NOT_SUPPORTED;
-		break;
 	case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
 		/*
 		 * Trusted OS is MP hence does not require migration

@@ -242,10 +238,6 @@ static int kvm_psci_0_2_call(struct kvm_
 		 */
 		val = PSCI_0_2_TOS_MP;
 		break;
-	case PSCI_0_2_FN_MIGRATE_INFO_UP_CPU:
-	case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU:
-		val = PSCI_RET_NOT_SUPPORTED;
-		break;
 	case PSCI_0_2_FN_SYSTEM_OFF:
 		kvm_psci_system_off(vcpu);
 		/*

@@ -271,7 +263,8 @@ static int kvm_psci_0_2_call(struct kvm_
 		ret = 0;
 		break;
 	default:
-		return -EINVAL;
+		val = PSCI_RET_NOT_SUPPORTED;
+		break;
 	}
 
 	*vcpu_reg(vcpu, 0) = val;

@@ -291,12 +284,9 @@ static int kvm_psci_0_1_call(struct kvm_
 	case KVM_PSCI_FN_CPU_ON:
 		val = kvm_psci_vcpu_on(vcpu);
 		break;
-	case KVM_PSCI_FN_CPU_SUSPEND:
-	case KVM_PSCI_FN_MIGRATE:
+	default:
 		val = PSCI_RET_NOT_SUPPORTED;
 		break;
-	default:
-		return -EINVAL;
 	}
 
 	*vcpu_reg(vcpu, 0) = val;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <[email protected]>

commit 1dace0116d0b05c967d94644fc4dfe96be2ecd3d upstream.

The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign resources correctly without the information from _CRS that tells us which address ranges are claimed by which bridge. In the bugs mentioned below, we incorrectly assign a sound card address (this example is from 1033299):

bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored)
pci 0000:80:01.0: [1106:3288] type 0 class 0x000403
pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit]
pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]

  BUG: unable to handle kernel paging request at ffffc90000378000
  IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel]

We assigned 0xfd_0000_0000, but that is not in any of the host bridge windows, and the sound card doesn't work.

Turn on pci=use_crs automatically for this system.

---
 arch/x86/pci/acpi.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

@@ -81,6 +81,17 @@ static const struct dmi_system_id pci_cr
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
 		},
 	},
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */
+	{
+		.callback = set_use_crs,
+		.ident = "Foxconn K8M890-8237A",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"),
+			DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <[email protected]>

commit 69a1220060c1523fd0515216eaa29e22f133b894 upstream.

The argument to KVM_GET_DIRTY_LOG is a memslot id; it may not match the position in the memslots array, which is sorted by gfn.

---
 arch/mips/kvm/mips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -982,7 +982,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kv
 
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
-		memslot = &kvm->memslots->memslots[log->slot];
+		memslot = id_to_memslot(kvm->memslots, log->slot);
 
 		ga = memslot->base_gfn << PAGE_SHIFT;
 		ga_end = ga + (memslot->npages << PAGE_SHIFT);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Hildenbrand <[email protected]>

commit b938eacea0b6881f2116a061e6da3ec840e75137 upstream.

Commit ea5f49692575 ("KVM: s390: only one external call may be pending at a time") introduced a bug on machines that don't have SIGP interpretation facility installed.
The injection of an external call will now always fail with -EBUSY (if none is already pending).

This leads to the following symptoms:
- An external call will be injected but with the wrong "src cpu id", as this id will not be remembered.
- The target vcpu will not be woken up, therefore the guest will hang if it cannot deal with unexpected failures of the SIGP EXTERNAL CALL instruction.
- If an external call is already pending, -EBUSY will not be reported.

---
 arch/s390/kvm/interrupt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1061,7 +1061,7 @@ static int __inject_extcall(struct kvm_v
 	if (sclp_has_sigpif())
 		return __inject_extcall_sigpif(vcpu, src_id);
 
-	if (!test_and_set_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs))
+	if (test_and_set_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs))
 		return -EBUSY;
 	*extcall = irq->u.extcall;
 	atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Holzheu <[email protected]>

commit 3c8e5105e759e7b2d88ea8a85b1285e535bc7500 upstream.

The REGSET_VX_LOW ELF notes should contain the lower 64 bit halfes of the first sixteen 128 bit vector registers. Unfortunately currently we copy the upper halfes.

Fix this and correctly copy the lower halfes.

---
 arch/s390/kernel/crash_dump.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -415,7 +415,7 @@ static void *nt_s390_vx_low(void *ptr, _
 	ptr += len;
 	/* Copy lower halves of SIMD registers 0-15 */
 	for (i = 0; i < 16; i++) {
-		memcpy(ptr, &vx_regs[i], 8);
+		memcpy(ptr, &vx_regs[i].u[2], 8);
 		ptr += 8;
 	}
 	return ptr;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sebastien Szymanski <[email protected]>

commit da946aeaeadcd24ff0cda9984c6fb8ed2bfd462a upstream.

According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg.

---
 arch/arm/mach-imx/clk-imx6q.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -443,7 +443,7 @@ static void __init imx6q_clocks_init(str
 	clk[IMX6QDL_CLK_GPMI_IO]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
 	clk[IMX6QDL_CLK_GPMI_APB]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
 	clk[IMX6QDL_CLK_ROM]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
-	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
+	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ahb",               base + 0x7c, 4);
 	clk[IMX6QDL_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[IMX6QDL_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
 	clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2("spdif",         "spdif_podf",        base + 0x7c, 14);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <[email protected]>

commit 36c01245eb8046c16eee6431e7dbfbb302635fa8 upstream.

As reported by Manfred Schlaegl here

http://marc.info/?l=linux-netdev&m=143482089824232&w=2

commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs.

As net timestamping is influenced by several players (netstamp_needed and netdev_tstamp_prequeue) Manfred missed a proper timestamp which leads to CAN frame loss.

As skb timestamping became now mandatory for CAN related skbs this patch makes sure that received CAN skbs always have a proper timestamp set. Maybe there's a better solution in the future but this patch fixes the CAN frame loss so far.

---
 drivers/net/can/dev.c   |    5 +++++
 drivers/net/can/slcan.c |    1 +
 drivers/net/can/vcan.c  |    3 +++
 net/can/af_can.c        |    6 +++++-
 4 files changed, 14 insertions(+), 1 deletion(-)

@@ -440,6 +440,9 @@ unsigned int can_get_echo_skb(struct net
 		struct can_frame *cf = (struct can_frame *)skb->data;
 		u8 dlc = cf->can_dlc;
 
+		if (!(skb->tstamp.tv64))
+			__net_timestamp(skb);
+
 		netif_rx(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
 

@@ -575,6 +578,7 @@ struct sk_buff *alloc_can_skb(struct net
 	if (unlikely(!skb))
 		return NULL;
 
+	__net_timestamp(skb);
 	skb->protocol = htons(ETH_P_CAN);
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;

@@ -603,6 +607,7 @@ struct sk_buff *alloc_canfd_skb(struct n
 	if (unlikely(!skb))
 		return NULL;
 
+	__net_timestamp(skb);
 	skb->protocol = htons(ETH_P_CANFD);
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;

@@ -207,6 +207,7 @@ static void slc_bump(struct slcan *sl)
 	if (!skb)
 		return;
 
+	__net_timestamp(skb);
 	skb->dev = sl->dev;
 	skb->protocol = htons(ETH_P_CAN);
 	skb->pkt_type = PACKET_BROADCAST;

@@ -78,6 +78,9 @@ static void vcan_rx(struct sk_buff *skb,
 	skb->dev       = dev;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
+	if (!(skb->tstamp.tv64))
+		__net_timestamp(skb);
+
 	netif_rx_ni(skb);
 }
 

@@ -310,8 +310,12 @@ int can_send(struct sk_buff *skb, int lo
 		return err;
 	}
 
-	if (newskb)
+	if (newskb) {
+		if (!(newskb->tstamp.tv64))
+			__net_timestamp(newskb);
+
 		netif_rx_ni(newskb);
+	}
 
 	/* update statistics */
 	can_stats.tx_frames++;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marcelo Ricardo Leitner <[email protected]>

[ Upstream commit 2d45a02d0166caf2627fe91897c6ffc3b19514c4 ]

->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization.

Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets.

This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler().

Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant().

Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally.

---
 include/net/netns/sctp.h   |    1 +
 include/net/sctp/structs.h |    4 ++++
 net/sctp/socket.c          |   43 ++++++++++++++++++++++++++++++++-----------
 3 files changed, 37 insertions(+), 11 deletions(-)

@@ -31,6 +31,7 @@ struct netns_sctp {
 	struct list_head addr_waitq;
 	struct timer_list addr_wq_timer;
 	struct list_head auto_asconf_splist;
+	/* Lock that protects both addr_waitq and auto_asconf_splist */
 	spinlock_t addr_wq_lock;
 
 	/* Lock that protects the local_addr_list writers */

@@ -223,6 +223,10 @@ struct sctp_sock {
 	atomic_t pd_mode;
 	/* Receive to here while partial delivery is in effect. */
 	struct sk_buff_head pd_lobby;
+
+	/* These must be the last fields, as they will skipped on copies,
+	 * like on accept and peeloff operations
+	 */
 	struct list_head auto_asconf_list;
 	int do_auto_asconf;
 };

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <[email protected]>

[ Upstream commit 2dab80a8b486f02222a69daca6859519e05781d9 ]

After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible.
The spinlocks around sysfs ->set() were removed in commit:
14f98f258f19 ("bridge: range check STP parameters")
There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is:
af615762e972 ("bridge: add ageing_time, stp_state, priority over netlink")

---
 net/bridge/br_ioctl.c  |    2 --
 net/bridge/br_stp_if.c |    4 +++-
 2 files changed, 3 insertions(+), 3 deletions(-)

@@ -247,9 +247,7 @@ static int old_dev_ioctl(struct net_devi
 		if (!ns_capable(dev_net(dev)->user_ns, CAP_NET_ADMIN))
 			return -EPERM;
 
-		spin_lock_bh(&br->lock);
 		br_stp_set_bridge_priority(br, args[1]);
-		spin_unlock_bh(&br->lock);
 		return 0;
 
 	case BRCTL_SET_PORT_PRIORITY:

@@ -243,12 +243,13 @@ bool br_stp_recalculate_bridge_id(struct
 	return true;
 }
 
-/* called under bridge lock */
+/* Acquires and releases bridge lock */
 void br_stp_set_bridge_priority(struct net_bridge *br, u16 newprio)
 {
 	struct net_bridge_port *p;
 	int wasroot;
 
+	spin_lock_bh(&br->lock);
 	wasroot = br_is_root_bridge(br);
 
 	list_for_each_entry(p, &br->port_list, list) {

@@ -266,6 +267,7 @@ void br_stp_set_bridge_priority(struct n
 	br_port_state_selection(br);
 	if (br_is_root_bridge(br) && !wasroot)
 		br_become_root_bridge(br);
+	spin_unlock_bh(&br->lock);
 }
 
 /* called under bridge lock */

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit f98f4514d07871da7a113dd9e3e330743fd70ae4 ]

We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu()

Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb417115fb ("packet: Add 'cpu' fanout policy.")

---
 net/packet/af_packet.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1353,7 +1353,7 @@ static int packet_rcv_fanout(struct sk_b
 			     struct packet_type *pt, struct net_device *orig_dev)
 {
 	struct packet_fanout *f = pt->af_packet_priv;
-	unsigned int num = f->num_members;
+	unsigned int num = READ_ONCE(f->num_members);
 	struct packet_sock *po;
 	unsigned int idx;
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <[email protected]>

[ Upstream commit 468479e6043c84f5a65299cc07cb08a22a28c2b1 ]

PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num.

When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment.

---
 net/packet/af_packet.c |   18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

@@ -1272,16 +1272,6 @@ static void packet_sock_destruct(struct
 	sk_refcnt_debug_dec(sk);
 }
 
-static int fanout_rr_next(struct packet_fanout *f, unsigned int num)
-{
-	int x = atomic_read(&f->rr_cur) + 1;
-
-	if (x >= num)
-		x = 0;
-
-	return x;
-}
-
 static unsigned int fanout_demux_hash(struct packet_fanout *f,
 				      struct sk_buff *skb,
 				      unsigned int num)

@@ -1293,13 +1283,9 @@ static unsigned int fanout_demux_lb(stru
 				    struct sk_buff *skb,
 				    unsigned int num)
 {
-	int cur, old;
+	unsigned int val = atomic_inc_return(&f->rr_cur);
 
-	cur = atomic_read(&f->rr_cur);
-	while ((old = atomic_cmpxchg(&f->rr_cur, cur,
-				     fanout_rr_next(f, num))) != cur)
-		cur = old;
-	return cur;
+	return val % num;
 }
 
 static unsigned int fanout_demux_cpu(struct packet_fanout *f,

This is the start of the stable review cycle for the 4.1.2 release. There are 56 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri Jul 10 07:31:19 UTC 2015. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.2-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.1.2-rc1

Eric W. Biederman <[email protected]>
vfs: Ignore unlocked mounts in fs_fully_visible

Eric W. Biederman <[email protected]>
vfs: Remove incorrect debugging WARN in prepend_path

Fabian Frederick <[email protected]>
fs/ufs: restore s_lock mutex

Fabian Frederick <[email protected]>
fs/ufs: revert "ufs: fix deadlocks introduced by sb mutex merge"

Jan Kara <[email protected]>
fs: Fix S_NOSEC handling

Radim Krčmář <[email protected]>
KVM: x86: make vapics_in_nmi_mode atomic

Radim Krčmář <[email protected]>
KVM: x86: properly restore LVT0

Marc Zyngier <[email protected]>
KVM: arm/arm64: vgic: Avoid injecting reserved IRQ numbers

Cornelia Huck <[email protected]>
KVM: s390: virtio-ccw: don't overwrite config space values

Michael Holzheu <[email protected]>
s390/kdump: fix REGSET_VX_LOW vector register ELF notes

Michael Holzheu <[email protected]>
s390/bpf: Fix backward jumps

Jens Freimann <[email protected]>
KVM: s390: clear floating interrupt bitmap and parameters

David Hildenbrand <[email protected]>
KVM: s390: fix external call injection without sigp interpretation

James Hogan <[email protected]>
MIPS: Fix KVM guest fixmap address

Paolo Bonzini <[email protected]>
KVM: mips: use id_to_memslot correctly

Bjorn Helgaas <[email protected]>
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A

Bjorn Helgaas <[email protected]>
x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing

Anton Blanchard <[email protected]>
powerpc/perf: Fix book3s kernel to userspace backtraces

preeti <[email protected]>
tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode

Thomas Petazzoni <[email protected]>
ARM: mvebu: fix suspend to RAM on big-endian configurations

Dmitry Osipenko <[email protected]>
ARM: tegra20: Store CPU "resettable" status in IRAM

Lorenzo Pieralisi <[email protected]>
ARM: kvm: psci: fix handling of unimplemented functions

Marc Zyngier <[email protected]>
arm: KVM: force execution of HCPTR access on VM exit

J. Bruce Fields <[email protected]>
selinux: fix setting of security labels on NFS

Joe Konno <[email protected]>
intel_pstate: set BYT MSR with wrmsrl_on_cpu()

Jiri Slaby <[email protected]>
mmc: sdhci: fix low memory corruption

Joerg Roedel <[email protected]>
iommu/amd: Handle large pages correctly in free_pagetable

Will Deacon <[email protected]>
iommu/arm-smmu: Fix broken ATOS check

Horia Geant? <[email protected]>
Revert "crypto: talitos - convert to use be16_add_cpu()"

Horia Geant? <[email protected]>
crypto: talitos - avoid memleak in talitos_alg_alloc()

Rui Miguel Silva <[email protected]>
usb: gadget: f_fs: add extra check before unregister_gadget_item

Simon Guinot <[email protected]>
net: mvneta: disable IP checksum with jumbo frames for Armada 370

Simon Guinot <[email protected]>
ARM: mvebu: update Ethernet compatible string for Armada XP

Simon Guinot <[email protected]>
net: mvneta: introduce compatible string "marvell, armada-xp-neta"

Tom Lendacky <[email protected]>
amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocation

Alexander Sverdlin <[email protected]>
sctp: Fix race between OOTB responce and route removal

Eric Dumazet <[email protected]>
bnx2x: fix lockdep splat

Mugunthan V N <[email protected]>
net: phy: fix phy link up when limiting speed via device tree

Or Gerlitz <[email protected]>
mlx4: Disable HA for SRIOV PF RoCE devices

Ido Shamay <[email protected]>
net/mlx4_en: Fix wrong csum complete report when rxvlan offload is disabled

Ido Shamay <[email protected]>
net/mlx4_en: Wake TX queues only when there's enough room

Eran Ben Elisha <[email protected]>
net/mlx4_en: Release TX QP when destroying TX ring

Julian Anastasov <[email protected]>
ip: report the original address of ICMP messages

Palik, Imre <[email protected]>
xen-netback: fix a BUG() during initialization

Christoph Paasch <[email protected]>
tcp: Do not call tcp_fastopen_reset_cipher from interrupt context

Stas Sergeev <[email protected]>
mvneta: add forgotten initialization of autonegotiation bits

Johannes Berg <[email protected]>
mac80211: fix locking in update_vlan_tailroom_need_count()

Julian Anastasov <[email protected]>
neigh: do not modify unlinked entries

Willem de Bruijn <[email protected]>
packet: avoid out of bounds read in round robin fanout

Eric Dumazet <[email protected]>
packet: read num_members once in packet_rcv_fanout()

Nikolay Aleksandrov <[email protected]>
bridge: fix br_stp_set_bridge_priority race conditions

Marcelo Ricardo Leitner <[email protected]>
sctp: fix ASCONF list handling

Oliver Hartkopp <[email protected]>
can: fix loss of CAN frames in raw_rcv

Bandan Das <[email protected]>
KVM: nSVM: Check for NRIPS support before updating control field

Sebastien Szymanski <[email protected]>
ARM: clk-imx6q: refine sata's parent

Hans de Goede <[email protected]>
ARM: dts: sunxi: Adjust touchscreen compatible for sun5i and later

-------------

Diffstat:

 .../bindings/net/marvell-armada-370-neta.txt       |  2 +-
 Makefile                                           |  4 +-
 arch/arm/boot/dts/armada-370-xp.dtsi               |  2 -
 arch/arm/boot/dts/armada-370.dtsi                  |  8 ++++
 arch/arm/boot/dts/armada-xp-mv78260.dtsi           |  2 +-
 arch/arm/boot/dts/armada-xp-mv78460.dtsi           |  2 +-
 arch/arm/boot/dts/armada-xp.dtsi                   | 10 ++++-
 arch/arm/boot/dts/sun5i-a10s.dtsi                  |  2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi                   |  2 +-
 arch/arm/boot/dts/sun7i-a20.dtsi                   |  2 +-
 arch/arm/kvm/interrupts.S                          | 10 ++---
 arch/arm/kvm/interrupts_head.S                     | 20 +++++++++-
 arch/arm/kvm/psci.c                                | 16 ++------
 arch/arm/mach-imx/clk-imx6q.c                      |  2 +-
 arch/arm/mach-mvebu/pm-board.c                     |  3 ++
 arch/arm/mach-tegra/cpuidle-tegra20.c              |  5 +--
 arch/arm/mach-tegra/reset-handler.S                | 10 +++--
 arch/arm/mach-tegra/reset.h                        |  4 ++
 arch/arm/mach-tegra/sleep-tegra20.S                | 37 +++++++++++--------
 arch/arm/mach-tegra/sleep.h                        |  4 ++
 arch/mips/include/asm/mach-generic/spaces.h        |  4 ++
 arch/mips/kvm/mips.c                               |  2 +-
 arch/powerpc/perf/core-book3s.c                    | 11 +++++-
 arch/s390/kernel/crash_dump.c                      |  2 +-
 arch/s390/kvm/interrupt.c                          |  5 ++-
 arch/s390/net/bpf_jit_comp.c                       |  2 +-
 arch/x86/include/asm/kvm_host.h                    |  2 +-
 arch/x86/kvm/i8254.c                               |  2 +-
 arch/x86/kvm/lapic.c                               |  5 ++-
 arch/x86/kvm/svm.c                                 |  8 +++-
 arch/x86/pci/acpi.c                                | 17 ++++++++-
 drivers/cpufreq/intel_pstate.c                     |  2 +-
 drivers/cpuidle/cpuidle-powernv.c                  | 15 ++++++--
 drivers/crypto/talitos.c                           |  4 +-
 drivers/iommu/amd_iommu.c                          |  6 +++
 drivers/iommu/arm-smmu.c                           |  2 +-
 drivers/mmc/host/sdhci.c                           |  2 +-
 drivers/net/can/dev.c                              |  5 +++
 drivers/net/can/slcan.c                            |  1 +
 drivers/net/can/vcan.c                             |  3 ++
 drivers/net/ethernet/amd/xgbe/xgbe-desc.c          |  2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c   |  3 +-
 drivers/net/ethernet/marvell/mvneta.c              | 33 ++++++++++++++++-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c     |  4 --
 drivers/net/ethernet/mellanox/mlx4/en_rx.c         | 17 +++------
 drivers/net/ethernet/mellanox/mlx4/en_tx.c         | 20 ++++++----
 drivers/net/ethernet/mellanox/mlx4/intf.c          |  8 +++-
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h       |  2 +-
 drivers/net/phy/phy_device.c                       |  5 ++-
 drivers/net/xen-netback/xenbus.c                   |  4 ++
 drivers/s390/kvm/virtio_ccw.c                      | 11 +++++-
 drivers/usb/gadget/function/f_fs.c                 | 10 ++++-
 fs/dcache.c                                        | 11 ------
 fs/inode.c                                         |  4 +-
 fs/namespace.c                                     |  8 +++-
 fs/ufs/balloc.c                                    | 34 ++++++++---------
 fs/ufs/ialloc.c                                    | 16 ++++----
 fs/ufs/inode.c                                     |  5 ++-
 fs/ufs/namei.c                                     | 14 ++++---
 fs/ufs/super.c                                     | 10 +++++
 fs/ufs/ufs.h                                       |  1 +
 include/net/netns/sctp.h                           |  1 +
 include/net/sctp/structs.h                         |  4 ++
 net/bridge/br_ioctl.c                              |  2 -
 net/bridge/br_stp_if.c                             |  4 +-
 net/can/af_can.c                                   |  6 ++-
 net/core/neighbour.c                               | 13 +++++++
 net/ipv4/af_inet.c                                 |  2 +
 net/ipv4/ip_sockglue.c                             | 11 +++++-
 net/ipv4/tcp.c                                     |  7 +++-
 net/ipv4/tcp_fastopen.c                            |  2 -
 net/ipv6/datagram.c                                | 12 +++++-
 net/mac80211/key.c                                 | 13 +++++--
 net/packet/af_packet.c                             | 20 ++--------
 net/sctp/output.c                                  |  4 +-
 net/sctp/socket.c                                  | 43 ++++++++++++++++------
 security/selinux/hooks.c                           |  1 +
 virt/kvm/arm/vgic.c                                |  5 +--
 78 files changed, 417 insertions(+), 202 deletions(-)

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <[email protected]>

[ Upstream commit 2c51a97f76d20ebf1f50fef908b986cb051fdff9 ]

The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems:

1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control.

2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash.

Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change.

---
 net/core/neighbour.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

@@ -957,6 +957,8 @@ int __neigh_event_send(struct neighbour
 	rc = 0;
 	if (neigh->nud_state & (NUD_CONNECTED | NUD_DELAY | NUD_PROBE))
 		goto out_unlock_bh;
+	if (neigh->dead)
+		goto out_dead;
 
 	if (!(neigh->nud_state & (NUD_STALE | NUD_INCOMPLETE))) {
 		if (NEIGH_VAR(neigh->parms, MCAST_PROBES) +

@@ -1013,6 +1015,13 @@ out_unlock_bh:
 		write_unlock(&neigh->lock);
 	local_bh_enable();
 	return rc;
+
+out_dead:
+	if (neigh->nud_state & NUD_STALE)
+		goto out_unlock_bh;
+	write_unlock_bh(&neigh->lock);
+	kfree_skb(skb);
+	return 1;
 }
 EXPORT_SYMBOL(__neigh_event_send);
 

@@ -1076,6 +1085,8 @@ int neigh_update(struct neighbour *neigh
 	if (!(flags & NEIGH_UPDATE_F_ADMIN) &&
 	    (old & (NUD_NOARP | NUD_PERMANENT)))
 		goto out;
+	if (neigh->dead)
+		goto out;
 
 	if (!(new & NUD_VALID)) {
 		neigh_del_timer(neigh);

@@ -1225,6 +1236,8 @@ EXPORT_SYMBOL(neigh_update);
  */
 void __neigh_set_probe_once(struct neighbour *neigh)
 {
+	if (neigh->dead)
+		return;
 	neigh->updated = jiffies;
 	if (!(neigh->nud_state & NUD_FAILED))
 		return;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit d53c66a5b80698620f7c9ba2372fff4017e987b8 ]

Michel reported following lockdep splat

[   44.718117] INFO: trying to register non-static key.
[   44.723081] the code is fine but needs lockdep annotation.
[   44.728559] turning off the locking correctness validator.
[   44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0
[   44.770289] Call Trace:
[   44.772741]  [<ffffffff816eb1cd>] dump_stack+0x4c/0x65
[   44.777879]  [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510
[   44.783708]  [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10
[   44.789538]  [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90
[   44.795276]  [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   44.801967]  [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10
[   44.807793]  [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250
[   44.814142]  [<ffffffff81112ba6>] lock_acquire+0xb6/0x290
[   44.819537]  [<ffffffff810d6675>] ? flush_work+0x5/0x280
[   44.824844]  [<ffffffff810d66ad>] flush_work+0x3d/0x280
[   44.830061]  [<ffffffff810d6675>] ? flush_work+0x5/0x280
[   44.835366]  [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20
[   44.841889]  [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50
[   44.847365]  [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90
[   44.853102]  [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0
[   44.859359]  [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   44.866045]  [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0
[   44.872048]  [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x]
[   44.878481]  [<ffffffff810d8670>] cancel_work_sync+0x10/0x20
[   44.884134]  [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x]
[   44.890829]  [<ffffffff8110ce02>] ? up+0x32/0x50
[   44.895439]  [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0
[   44.901005]  [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x]
[   44.907527]  [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0
[   44.912921]  [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x]
[   44.919879]  [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x]
[   44.926664]  [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40
[   44.932148]  [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20
[   44.937364]  [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630
[   44.942582]  [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70
[   44.947972]  [<ffffffff815ac013>] sock_ioctl+0x73/0x280
[   44.953192]  [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0
[   44.958587]  [<ffffffff8110d0b3>] ? up_read+0x23/0x40
[   44.963631]  [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0
[   44.969105]  [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0
[   44.974149]  [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f

As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED, we also need to guard bnx2x_stop_ptp() with same condition, otherwise ptp_task workqueue is not initialized and kernel barfs on cancel_work_sync()

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -9323,7 +9323,8 @@ unload_error:
 	 * function stop ramrod is sent, since as part of this ramrod FW access
 	 * PTP registers.
 	 */
-	bnx2x_stop_ptp(bp);
+	if (bp->flags & PTP_SUPPORTED)
+		bnx2x_stop_ptp(bp);
 
 	/* Disable HW interrupts, NAPI */
 	bnx2x_netif_stop(bp, 1);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Sverdlin <[email protected]>

[ Upstream commit 29c4afc4e98f4dc0ea9df22c631841f9c220b944 ]

There is NULL pointer dereference possible during statistics update if the route used for OOTB responce is removed at unfortunate time. If the route exists when we receive OOTB packet and we finally jump into sctp_packet_transmit() to send ABORT, but in the meantime route is removed under our feet, we take "no_route" path and try to update stats with IP_INC_STATS(sock_net(asoc->base.sk), ...).

But sctp_ootb_pkt_new() used to prepare responce packet doesn't call sctp_transport_set_owner() and therefore there is no asoc associated with this packet. Probably temporary asoc just for OOTB responces is overkill, so just introduce a check like in all other places in sctp_packet_transmit(), where "asoc" is dereferenced.

To reproduce this, one needs to
0. ensure that sctp module is loaded (otherwise ABORT is not generated)
1. remove default route on the machine
2. while true; do
ip route del [interface-specific route]
ip route add [interface-specific route]
done
3. send enough OOTB packets (i.e. HB REQs) from another host to trigger ABORT responce

On x86_64 the crash looks like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp]
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.0.5-1-ARCH #1
Hardware name: ...
task: ffffffff818124c0 ti: ffffffff81800000 task.ti: ffffffff81800000
RIP: 0010:[<ffffffffa05ec9ac>]  [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp]
RSP: 0018:ffff880127c037b8  EFLAGS: 00010296
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000015ff66b480
RDX: 00000015ff66b400 RSI: ffff880127c17200 RDI: ffff880123403700
RBP: ffff880127c03888 R08: 0000000000017200 R09: ffffffff814625af
R10: ffffea00047e4680 R11: 00000000ffffff80 R12: ffff8800b0d38a28
R13: ffff8800b0d38a28 R14: ffff8800b3e88000 R15: ffffffffa05f24e0
FS:  0000000000000000(0000) GS:ffff880127c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 00000000c855b000 CR4: 00000000000007f0
Stack:
 ffff880127c03910 ffff8800b0d38a28 ffffffff8189d240 ffff88011f91b400
 ffff880127c03828 ffffffffa05c94c5 0000000000000000 ffff8800baa1c520
 0000000000000000 0000000000000001 0000000000000000 0000000000000000
Call Trace:
 <IRQ>
 [<ffffffffa05c94c5>] ? sctp_sf_tabort_8_4_8.isra.20+0x85/0x140 [sctp]
 [<ffffffffa05d6b42>] ? sctp_transport_put+0x52/0x80 [sctp]
 [<ffffffffa05d0bfc>] sctp_do_sm+0xb8c/0x19a0 [sctp]
 [<ffffffff810b0e00>] ? trigger_load_balance+0x90/0x210
 [<ffffffff810e0329>] ? update_process_times+0x59/0x60
 [<ffffffff812c7a40>] ? timerqueue_add+0x60/0xb0
 [<ffffffff810e0549>] ? enqueue_hrtimer+0x29/0xa0
 [<ffffffff8101f599>] ? read_tsc+0x9/0x10
 [<ffffffff8116d4b5>] ? put_page+0x55/0x60
 [<ffffffff810ee1ad>] ? clockevents_program_event+0x6d/0x100
 [<ffffffff81462b68>] ? skb_free_head+0x58/0x80
 [<ffffffffa029a10b>] ? chksum_update+0x1b/0x27 [crc32c_generic]
 [<ffffffff81283f3e>] ? crypto_shash_update+0xce/0xf0
 [<ffffffffa05d3993>] sctp_endpoint_bh_rcv+0x113/0x280 [sctp]
 [<ffffffffa05dd4e6>] sctp_inq_push+0x46/0x60 [sctp]
 [<ffffffffa05ed7a0>] sctp_rcv+0x880/0x910 [sctp]
 [<ffffffffa05ecb50>] ? sctp_packet_transmit_chunk+0xb0/0xb0 [sctp]
 [<ffffffffa05ecb70>] ? sctp_csum_update+0x20/0x20 [sctp]
 [<ffffffff814b05a5>] ? ip_route_input_noref+0x235/0xd30
 [<ffffffff81051d6b>] ? ack_ioapic_level+0x7b/0x150
 [<ffffffff814b27be>] ip_local_deliver_finish+0xae/0x210
 [<ffffffff814b2e15>] ip_local_deliver+0x35/0x90
 [<ffffffff814b2a15>] ip_rcv_finish+0xf5/0x370
 [<ffffffff814b3128>] ip_rcv+0x2b8/0x3a0
 [<ffffffff81474193>] __netif_receive_skb_core+0x763/0xa50
 [<ffffffff81476c28>] __netif_receive_skb+0x18/0x60
 [<ffffffff81476cb0>] netif_receive_skb_internal+0x40/0xd0
 [<ffffffff814776c8>] napi_gro_receive+0xe8/0x120
 [<ffffffffa03946aa>] rtl8169_poll+0x2da/0x660 [r8169]
 [<ffffffff8147896a>] net_rx_action+0x21a/0x360
 [<ffffffff81078dc1>] __do_softirq+0xe1/0x2d0
 [<ffffffff8107912d>] irq_exit+0xad/0xb0
 [<ffffffff8157d158>] do_IRQ+0x58/0xf0
 [<ffffffff8157b06d>] common_interrupt+0x6d/0x6d
 <EOI>
 [<ffffffff810e1218>] ? hrtimer_start+0x18/0x20
 [<ffffffffa05d65f9>] ? sctp_transport_destroy_rcu+0x29/0x30 [sctp]
 [<ffffffff81020c50>] ? mwait_idle+0x60/0xa0
 [<ffffffff810216ef>] arch_cpu_idle+0xf/0x20
 [<ffffffff810b731c>] cpu_startup_entry+0x3ec/0x480
 [<ffffffff8156b365>] rest_init+0x85/0x90
 [<ffffffff818eb035>] start_kernel+0x48b/0x4ac
 [<ffffffff818ea120>] ? early_idt_handlers+0x120/0x120
 [<ffffffff818ea339>] x86_64_start_reservations+0x2a/0x2c
 [<ffffffff818ea49c>] x86_64_start_kernel+0x161/0x184
Code: 90 48 8b 80 b8 00 00 00 48 89 85 70 ff ff ff 48 83 bd 70 ff ff ff 00 0f 85 cd fa ff ff 48 89 df 31 db e8 18 63 e7 e0 48 8b 45 80 <48> 8b 40 20 48 8b 40 30 48 8b 80 68 01 00 00 65 48 ff 40 78 e9
RIP  [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp]
 RSP <ffff880127c037b8>
CR2: 0000000000000020
---[ end trace 5aec7fd2dc983574 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
drm_kms_helper: panic occurred, switching back to text console
---[ end Kernel panic - not syncing: Fatal exception in interrupt

---
 net/sctp/output.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -599,7 +599,9 @@ out:
 	return err;
 no_route:
 	kfree_skb(nskb);
-	IP_INC_STATS(sock_net(asoc->base.sk), IPSTATS_MIB_OUTNOROUTES);
+
+	if (asoc)
+		IP_INC_STATS(sock_net(asoc->base.sk), IPSTATS_MIB_OUTNOROUTES);
 
 	/* FIXME: Returning the 'err' will effect all the associations
 	 * associated with a socket, although only one of the paths of the

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tom Lendacky <[email protected]>

[ Upstream commit 472cfe7127760d68b819cf35a26e5a1b44b30f4e ]

When allocating Rx related buffers, alloc_pages is called using an order number that is decreased until successful. A system under stress can experience failures during this allocation process resulting in a warning being issued. This message can be of concern to end users even though the failure is not fatal. Since the failure is not fatal and can occur multiple times, the driver should include the __GFP_NOWARN flag to suppress the warning message from being issued.

---
 drivers/net/ethernet/amd/xgbe/xgbe-desc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -263,7 +263,7 @@ static int xgbe_alloc_pages(struct xgbe_
 	int ret;
 
 	/* Try to obtain pages, decreasing order if necessary */
-	gfp |= __GFP_COLD | __GFP_COMP;
+	gfp |= __GFP_COLD | __GFP_COMP | __GFP_NOWARN;
 	while (order >= 0) {
 		pages = alloc_pages(gfp, order);
 		if (pages)

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Guinot <[email protected]>

[ Upstream commit f522a975a8101895a85354b9c143f41b8248e71a ]

The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed.

This patch introduces a new compatible string "marvell,armada-xp-neta".

---
 Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt |    2 +-
 drivers/net/ethernet/marvell/mvneta.c                             |    1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

@@ -1,7 +1,7 @@
 * Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
 
 Required properties:
-- compatible: should be "marvell,armada-370-neta".
+- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta".
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.

@@ -3185,6 +3185,7 @@ static int mvneta_remove(struct platform
 
 static const struct of_device_id mvneta_match[] = {
 	{ .compatible = "marvell,armada-370-neta" },
+	{ .compatible = "marvell,armada-xp-neta" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mvneta_match);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Guinot <[email protected]>

[ Upstream commit ea3b55fe83b5fcede82d183164b9d6831b26e33b ]

This patch updates the Ethernet DT nodes for Armada XP SoCs with the compatible string "marvell,armada-xp-neta".

---
 arch/arm/boot/dts/armada-370-xp.dtsi     |    2 --
 arch/arm/boot/dts/armada-370.dtsi        |    8 ++++++++
 arch/arm/boot/dts/armada-xp-mv78260.dtsi |    2 +-
 arch/arm/boot/dts/armada-xp-mv78460.dtsi |    2 +-
 arch/arm/boot/dts/armada-xp.dtsi         |   10 +++++++++-
 5 files changed, 19 insertions(+), 5 deletions(-)

@@ -270,7 +270,6 @@
 			};
 
 			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
 				reg = <0x70000 0x4000>;
 				interrupts = <8>;
 				clocks = <&gateclk 4>;

@@ -286,7 +285,6 @@
 			};
 
 			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
 				reg = <0x74000 0x4000>;
 				interrupts = <10>;
 				clocks = <&gateclk 3>;

@@ -307,6 +307,14 @@
 					dmacap,memset;
 				};
 			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-370-neta";
+			};
 		};
 	};
 };

@@ -318,7 +318,7 @@
 			};
 
 			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;

@@ -356,7 +356,7 @@
 			};
 
 			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;

@@ -177,7 +177,7 @@
 			};
 
 			eth2: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x30000 0x4000>;
 				interrupts = <12>;
 				clocks = <&gateclk 2>;

@@ -220,6 +220,14 @@
 				};
 			};
 
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
 			xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Guinot <[email protected]>

[ Upstream commit b65657fc240ae6c1d2a1e62db9a0e61ac9631d7a ]

The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't support TCP/IP checksumming with frame sizes larger than 1600 bytes.

This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set to a value greater than 1600 bytes.

---
 drivers/net/ethernet/marvell/mvneta.c |   26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

@@ -310,6 +310,7 @@ struct mvneta_port {
 	unsigned int link;
 	unsigned int duplex;
 	unsigned int speed;
+	unsigned int tx_csum_limit;
 	int use_inband_status:1;
 };
 

@@ -2508,8 +2509,10 @@ static int mvneta_change_mtu(struct net_
 
 	dev->mtu = mtu;
 
-	if (!netif_running(dev))
+	if (!netif_running(dev)) {
+		netdev_update_features(dev);
 		return 0;
+	}
 
 	/* The interface is running, so we have to force a
 	 * reallocation of the queues

@@ -2538,9 +2541,26 @@ static int mvneta_change_mtu(struct net_
 	mvneta_start_dev(pp);
 	mvneta_port_up(pp);
 
+	netdev_update_features(dev);
+
 	return 0;
 }
 
+static netdev_features_t mvneta_fix_features(struct net_device *dev,
+					     netdev_features_t features)
+{
+	struct mvneta_port *pp = netdev_priv(dev);
+
+	if (pp->tx_csum_limit && dev->mtu > pp->tx_csum_limit) {
+		features &= ~(NETIF_F_IP_CSUM | NETIF_F_TSO);
+		netdev_info(dev,
+			    "Disable IP checksum for MTU greater than %dB\n",
+			    pp->tx_csum_limit);
+	}
+
+	return features;
+}
+
 /* Get mac address */
 static void mvneta_get_mac_addr(struct mvneta_port *pp, unsigned char *addr)
 {

@@ -2862,6 +2882,7 @@ static const struct net_device_ops mvnet
 	.ndo_set_rx_mode     = mvneta_set_rx_mode,
 	.ndo_set_mac_address = mvneta_set_mac_addr,
 	.ndo_change_mtu      = mvneta_change_mtu,
+	.ndo_fix_features    = mvneta_fix_features,
 	.ndo_get_stats64     = mvneta_get_stats64,
 	.ndo_do_ioctl        = mvneta_ioctl,
 };

@@ -3107,6 +3128,9 @@ static int mvneta_probe(struct platform_
 		}
 	}
 
+	if (of_device_is_compatible(dn, "marvell,armada-370-neta"))
+		pp->tx_csum_limit = 1600;
+
 	pp->tx_ring_size = MVNETA_MAX_TXD;
 	pp->rx_ring_size = MVNETA_MAX_RXD;
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rui Miguel Silva <[email protected]>

commit f14e9ad17f46051b02bffffac2036486097de19e upstream.

ffs_closed can race with configfs_rmdir which will call config_item_release, so add an extra check to avoid calling the unregister_gadget_item with an null gadget item.

---
 drivers/usb/gadget/function/f_fs.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

@@ -3435,6 +3435,7 @@ done:
 static void ffs_closed(struct ffs_data *ffs)
 {
 	struct ffs_dev *ffs_obj;
+	struct f_fs_opts *opts;
 
 	ENTER();
 	ffs_dev_lock();

@@ -3449,8 +3450,13 @@ static void ffs_closed(struct ffs_data *
 	    ffs_obj->ffs_closed_callback)
 		ffs_obj->ffs_closed_callback(ffs);
 
-	if (!ffs_obj->opts || ffs_obj->opts->no_configfs
-	    || !ffs_obj->opts->func_inst.group.cg_item.ci_parent)
+	if (ffs_obj->opts)
+		opts = ffs_obj->opts;
+	else
+		goto done;
+
+	if (opts->no_configfs || !opts->func_inst.group.cg_item.ci_parent
+	    || !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount))
 		goto done;
 
 	unregister_gadget_item(ffs_obj->opts->

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Horia Geant? <[email protected]>

commit 69d9cd8c592f1abce820dbce7181bbbf6812cfbd upstream.

This reverts commit 7291a932c6e27d9768e374e9d648086636daf61c.

The conversion to be16_add_cpu() is incorrect in case cryptlen is negative due to premature (i.e. before addition / subtraction) implicit conversion of cryptlen (int -> u16) leading to sign loss.

---
 drivers/crypto/talitos.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -925,7 +925,8 @@ static int sg_to_link_tbl(struct scatter
 		sg_count--;
 		link_tbl_ptr--;
 	}
-	be16_add_cpu(&link_tbl_ptr->len, cryptlen);
+	link_tbl_ptr->len = cpu_to_be16(be16_to_cpu(link_tbl_ptr->len)
+					+ cryptlen);
 
 	/* tag end of link table */
 	link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Will Deacon <[email protected]>

commit d38f0ff9ab35414644995bae187d015c31aae19c upstream.

Commit 83a60ed8f0b5 ("iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS condition") accidentally negated the ID0_ATOSNS predicate in the ATOS feature check, causing the driver to attempt ATOS requests on SMMUv2 hardware without the ATOS feature implemented.

This patch restores the predicate to the correct value.

---
 drivers/iommu/arm-smmu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1567,7 +1567,7 @@ static int arm_smmu_device_cfg_probe(str
 		return -ENODEV;
 	}
 
-	if ((id & ID0_S1TS) && ((smmu->version == 1) || (id & ID0_ATOSNS))) {
+	if ((id & ID0_S1TS) && ((smmu->version == 1) || !(id & ID0_ATOSNS))) {
 		smmu->features |= ARM_SMMU_FEAT_TRANS_OPS;
 		dev_notice(smmu->dev, "\taddress translation ops\n");
 	}

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Hogan <[email protected]>

commit 8e748c8d09a9314eedb5c6367d9acfaacddcdc88 upstream.

KVM guest kernels for trap & emulate run in user mode, with a modified set of kernel memory segments. However the fixmap address is still in the normal KSeg3 region at 0xfffe0000 regardless, causing problems when cache alias handling makes use of them when handling copy on write.

Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped region when CONFIG_KVM_GUEST is defined.

Patchwork: https://patchwork.linux-mips.org/patch/9887/

---
 arch/mips/include/asm/mach-generic/spaces.h |    4 ++++
 1 file changed, 4 insertions(+)

@@ -94,7 +94,11 @@
 #endif
 
 #ifndef FIXADDR_TOP
+#ifdef CONFIG_KVM_GUEST
+#define FIXADDR_TOP		((unsigned long)(long)(int)0x7ffe0000)
+#else
 #define FIXADDR_TOP		((unsigned long)(long)(int)0xfffe0000)
 #endif
+#endif
 
 #endif /* __ASM_MACH_GENERIC_SPACES_H */

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit 62a7f368ffbc13d9aedfdd7aeae711b177db69ac upstream.

When dma mapping (dma_map_sg) fails in sdhci_pre_dma_transfer, -EINVAL is returned. There are 3 callers of sdhci_pre_dma_transfer:
* sdhci_pre_req and sdhci_adma_table_pre: handle negative return
* sdhci_prepare_data: handles 0 (error) and "else" (good) only

sdhci_prepare_data is therefore broken. When it receives -EINVAL from sdhci_pre_dma_transfer, it assumes 1 sg mapping was mapped. Later, this non-existent mapping with address 0 is kmap'ped and written to:
Corrupted low memory at ffff880000001000 (1000 phys) = 22b7d67df2f6d1cf Corrupted low memory at ffff880000001008 (1008 phys) = 63848a5216b7dd95 Corrupted low memory at ffff880000001010 (1010 phys) = 330eb7ddef39e427 Corrupted low memory at ffff880000001018 (1018 phys) = 8017ac7295039bda Corrupted low memory at ffff880000001020 (1020 phys) = 8ce039eac119074f
...

So teach sdhci_prepare_data to understand negative return values from sdhci_pre_dma_transfer and disable DMA in that case, as well as for zero.

It was introduced in 348487cb28e66b032bae1b38424d81bf5b444408 (mmc:
sdhci: use pipeline mmc requests to improve performance). The commit seems to be suspicious also by assigning host->sg_count both in sdhci_pre_dma_transfer and sdhci_adma_table_pre.

---
 drivers/mmc/host/sdhci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -848,7 +848,7 @@ static void sdhci_prepare_data(struct sd
 			int sg_cnt;
 
 			sg_cnt = sdhci_pre_dma_transfer(host, data, NULL);
-			if (sg_cnt == 0) {
+			if (sg_cnt <= 0) {
 				/*
 				 * This only happens when someone fed
 				 * us an invalid request.

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joe Konno <[email protected]>

commit 0dd23f94251f49da99a6cbfb22418b2d757d77d6 upstream.

Commit 007bea098b86 (intel_pstate: Add setting voltage value for baytrail P states.) introduced byt_set_pstate() with the assumption that it would always be run by the CPU whose MSR is to be written by it. It turns out, however, that is not always the case in practice, so modify byt_set_pstate() to enforce the MSR write done by it to always happen on the right CPU.

---
 drivers/cpufreq/intel_pstate.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -535,7 +535,7 @@ static void byt_set_pstate(struct cpudat
 
 	val |= vid;
 
-	wrmsrl(MSR_IA32_PERF_CTL, val);
+	wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
 }
 
 #define BYT_BCLK_FREQS 5

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <[email protected]>

commit 9fc2b4b436cff7d8403034676014f1be9d534942 upstream.

Before calling into the filesystem, vfs_setxattr calls security_inode_setxattr, which ends up calling selinux_inode_setxattr in our case. That returns -EOPNOTSUPP whenever SBLABEL_MNT is not set. SBLABEL_MNT was supposed to be set by sb_finish_set_opts, which sets it only if selinux_is_sblabel_mnt returns true.

The selinux_is_sblabel_mnt logic was broken by eadcabc697e9 "SELinux: do all flags twiddling in one place", which didn't take into the account the SECURITY_FS_USE_NATIVE behavior that had been introduced for nfs with eb9ae686507b "SELinux: Add new labeling type native labels".

This caused setxattr's of security labels over NFSv4.2 to fail.

---
 security/selinux/hooks.c |    1 +
 1 file changed, 1 insertion(+)

@@ -403,6 +403,7 @@ static int selinux_is_sblabel_mnt(struct
 	return sbsec->behavior == SECURITY_FS_USE_XATTR ||
 		sbsec->behavior == SECURITY_FS_USE_TRANS ||
 		sbsec->behavior == SECURITY_FS_USE_TASK ||
+		sbsec->behavior == SECURITY_FS_USE_NATIVE ||
 		/* Special handling. Genfs but also in-core setxattr handler */
 		!strcmp(sb->s_type->name, "sysfs") ||
 		!strcmp(sb->s_type->name, "pstore") ||

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <[email protected]>

commit 85e84ba31039595995dae80b277378213602891b upstream.

On VM entry, we disable access to the VFP registers in order to perform a lazy save/restore of these registers.

On VM exit, we restore access, test if we did enable them before, and save/restore the guest/host registers if necessary. In this sequence, the FPEXC register is always accessed, irrespective of the trapping configuration.

If the guest didn't touch the VFP registers, then the HCPTR access has now enabled such access, but we're missing a barrier to ensure architectural execution of the new HCPTR configuration. If the HCPTR access has been delayed/reordered, the subsequent access to FPEXC will cause a trap, which we aren't prepared to handle at all.

The same condition exists when trapping to enable VFP for the guest.

The fix is to introduce a barrier after enabling VFP access. In the vmexit case, it can be relaxed to only takes place if the guest hasn't accessed its view of the VFP registers, making the access to FPEXC safe.

The set_hcptr macro is modified to deal with both vmenter/vmexit and vmtrap operations, and now takes an optional label that is branched to when the guest hasn't touched the VFP registers.

---
 arch/arm/kvm/interrupts.S      |   10 ++++------
 arch/arm/kvm/interrupts_head.S |   20 ++++++++++++++++++--
 2 files changed, 22 insertions(+), 8 deletions(-)

@@ -170,13 +170,9 @@ __kvm_vcpu_return:
 	@ Don't trap coprocessor accesses for host kernel
 	set_hstr vmexit
 	set_hdcr vmexit
-	set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
+	set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore
 
 #ifdef CONFIG_VFPv3
-	@ Save floating point registers we if let guest use them.
-	tst	r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
-	bne	after_vfp_restore
-
 	@ Switch VFP/NEON hardware state to the host's
 	add	r7, vcpu, #VCPU_VFP_GUEST
 	store_vfp_state r7

@@ -188,6 +184,8 @@ after_vfp_restore:
 	@ Restore FPEXC_EN which we clobbered on entry
 	pop	{r2}
 	VFPFMXR FPEXC, r2
+#else
+after_vfp_restore:
 #endif
 
 	@ Reset Hyp-role

@@ -483,7 +481,7 @@ switch_to_guest_vfp:
 	push	{r3-r7}
 
 	@ NEON/VFP used.  Turn on VFP access.
-	set_hcptr vmexit, (HCPTR_TCP(10) | HCPTR_TCP(11))
+	set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11))
 
 	@ Switch VFP/NEON hardware state to the guest's
 	add	r7, r0, #VCPU_VFP_HOST

@@ -591,8 +591,13 @@ ARM_BE8(rev	r6, r6  )
 .endm
 
 /* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
- * (hardware reset value is 0). Keep previous value in r2. */
-.macro set_hcptr operation, mask
+ * (hardware reset value is 0). Keep previous value in r2.
+ * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if
+ * VFP wasn't already enabled (always executed on vmtrap).
+ * If a label is specified with vmexit, it is branched to if VFP wasn't
+ * enabled.
+ */
+.macro set_hcptr operation, mask, label = none
 	mrc	p15, 4, r2, c1, c1, 2
 	ldr	r3, =\mask
 	.if \operation == vmentry

@@ -601,6 +606,17 @@ ARM_BE8(rev	r6, r6  )
 	bic	r3, r2, r3		@ Don't trap defined coproc-accesses
 	.endif
 	mcr	p15, 4, r3, c1, c1, 2
+	.if \operation != vmentry
+	.if \operation == vmexit
+	tst	r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
+	beq	1f
+	.endif
+	isb
+	.if \label != none
+	b	\label
+	.endif
+1:
+	.endif
 .endm
 
 /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Osipenko <[email protected]>

commit 4d48edb3c3e1234d6b3fcdfb9ac24d7c6de449cb upstream.

Commit 7232398abc6a ("ARM: tegra: Convert PMC to a driver") changed tegra_resume() location storing from late to early and, as a result, broke suspend on Tegra20. PMC scratch register 41 is used by tegra LP1 resume code for retrieving stored physical memory address of common resume function and in the same time used by tegra20_cpu_shutdown() (shared by Tegra20 cpuidle driver and platform SMP code), which is storing CPU1 "resettable" status. It implies strict order of scratch register usage, otherwise resume function address is lost on Tegra20 after disabling non-boot CPU's on suspend. Fix it by storing "resettable" status in IRAM instead of PMC scratch register.

---
 arch/arm/mach-tegra/cpuidle-tegra20.c |    5 +---
 arch/arm/mach-tegra/reset-handler.S   |   10 ++++++---
 arch/arm/mach-tegra/reset.h           |    4 +++
 arch/arm/mach-tegra/sleep-tegra20.S   |   37 +++++++++++++++++++---------------
 arch/arm/mach-tegra/sleep.h           |    4 +++
 5 files changed, 38 insertions(+), 22 deletions(-)

@@ -34,6 +34,7 @@
 #include "iomap.h"
 #include "irq.h"
 #include "pm.h"
+#include "reset.h"
 #include "sleep.h"
 
 #ifdef CONFIG_PM_SLEEP

@@ -70,15 +71,13 @@ static struct cpuidle_driver tegra_idle_
 
 #ifdef CONFIG_PM_SLEEP
 #ifdef CONFIG_SMP
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-
 static int tegra20_reset_sleeping_cpu_1(void)
 {
 	int ret = 0;
 
 	tegra_pen_lock();
 
-	if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE)
+	if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
 		tegra20_cpu_shutdown(1);
 	else
 		ret = -EINVAL;

@@ -169,10 +169,10 @@ after_errata:
 	cmp	r6, #TEGRA20
 	bne	1f
 	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov32	r5, TEGRA_PMC_BASE
-	mov	r0, #0
+	mov32	r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
+	mov	r0, #CPU_NOT_RESETTABLE
 	cmp	r10, #0
-	strne	r0, [r5, #PMC_SCRATCH41]
+	strneb	r0, [r5, #__tegra20_cpu1_resettable_status_offset]
 1:
 #endif
 

@@ -281,6 +281,10 @@ __tegra_cpu_reset_handler_data:
 	.rept	TEGRA_RESET_DATA_SIZE
 	.long	0
 	.endr
+	.globl	__tegra20_cpu1_resettable_status_offset
+	.equ	__tegra20_cpu1_resettable_status_offset, \
+					. - __tegra_cpu_reset_handler_start
+	.byte	0
 	.align L1_CACHE_SHIFT
 
 ENTRY(__tegra_cpu_reset_handler_end)

@@ -35,6 +35,7 @@ extern unsigned long __tegra_cpu_reset_h
 
 void __tegra_cpu_reset_handler_start(void);
 void __tegra_cpu_reset_handler(void);
+void __tegra20_cpu1_resettable_status_offset(void);
 void __tegra_cpu_reset_handler_end(void);
 void tegra_secondary_startup(void);
 

@@ -47,6 +48,9 @@ void tegra_secondary_startup(void);
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
 	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
 	 (u32)__tegra_cpu_reset_handler_start)))
+#define tegra20_cpu1_resettable_status \
+	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+	 (u32)__tegra20_cpu1_resettable_status_offset))
 #endif
 
 #define tegra_cpu_reset_handler_offset \

@@ -97,9 +97,10 @@ ENDPROC(tegra20_hotplug_shutdown)
 ENTRY(tegra20_cpu_shutdown)
 	cmp	r0, #0
 	reteq	lr			@ must not be called for CPU 0
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
 	mov	r12, #CPU_RESETTABLE
-	str	r12, [r1]
+	strb	r12, [r1, r2]
 
 	cpu_to_halt_reg r1, r0
 	ldr	r3, =TEGRA_FLOW_CTRL_VIRT

@@ -182,38 +183,41 @@ ENDPROC(tegra_pen_unlock)
 /*
  * tegra20_cpu_clear_resettable(void)
  *
- * Called to clear the "resettable soon" flag in PMC_SCRATCH41 when
+ * Called to clear the "resettable soon" flag in IRAM variable when
  * it is expected that the secondary CPU will be idle soon.
  */
 ENTRY(tegra20_cpu_clear_resettable)
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
 	mov	r12, #CPU_NOT_RESETTABLE
-	str	r12, [r1]
+	strb	r12, [r1, r2]
 	ret	lr
 ENDPROC(tegra20_cpu_clear_resettable)
 
 /*
  * tegra20_cpu_set_resettable_soon(void)
  *
- * Called to set the "resettable soon" flag in PMC_SCRATCH41 when
+ * Called to set the "resettable soon" flag in IRAM variable when
  * it is expected that the secondary CPU will be idle soon.
  */
 ENTRY(tegra20_cpu_set_resettable_soon)
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
 	mov	r12, #CPU_RESETTABLE_SOON
-	str	r12, [r1]
+	strb	r12, [r1, r2]
 	ret	lr
 ENDPROC(tegra20_cpu_set_resettable_soon)
 
 /*
  * tegra20_cpu_is_resettable_soon(void)
  *
- * Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been
+ * Returns true if the "resettable soon" flag in IRAM variable has been
  * set because it is expected that the secondary CPU will be idle soon.
  */
 ENTRY(tegra20_cpu_is_resettable_soon)
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
-	ldr	r12, [r1]
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
+	ldrb	r12, [r1, r2]
 	cmp	r12, #CPU_RESETTABLE_SOON
 	moveq	r0, #1
 	movne	r0, #0

@@ -256,9 +260,10 @@ ENTRY(tegra20_sleep_cpu_secondary_finish
 	mov	r0, #TEGRA_FLUSH_CACHE_LOUIS
 	bl	tegra_disable_clean_inv_dcache
 
-	mov32	r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r4, =__tegra20_cpu1_resettable_status_offset
 	mov	r3, #CPU_RESETTABLE
-	str	r3, [r0]
+	strb	r3, [r0, r4]
 
 	bl	tegra_cpu_do_idle
 

@@ -274,10 +279,10 @@ ENTRY(tegra20_sleep_cpu_secondary_finish
 
 	bl	tegra_pen_lock
 
-	mov32	r3, TEGRA_PMC_VIRT
-	add	r0, r3, #PMC_SCRATCH41
+	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r4, =__tegra20_cpu1_resettable_status_offset
 	mov	r3, #CPU_NOT_RESETTABLE
-	str	r3, [r0]
+	strb	r3, [r0, r4]
 
 	bl	tegra_pen_unlock
 

@@ -18,6 +18,7 @@
 #define __MACH_TEGRA_SLEEP_H
 
 #include "iomap.h"
+#include "irammap.h"
 
 #define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
 					+ IO_CPU_VIRT)

@@ -29,6 +30,9 @@
 					+ IO_APB_VIRT)
 #define TEGRA_PMC_VIRT	(TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
 
+#define TEGRA_IRAM_RESET_BASE_VIRT (IO_IRAM_VIRT + \
+				TEGRA_IRAM_RESET_HANDLER_OFFSET)
+
 /* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
 #define PMC_SCRATCH37	0x130
 #define PMC_SCRATCH38	0x134

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <[email protected]>

commit 2f5bc307be2480ba89e4c5d118f406f04a4a7299 upstream.

The current Armada XP suspend to RAM implementation, as added in commit 27432825ae19f ("ARM: mvebu: Armada XP GP specific suspend/resume code") does not handle big-endian configurations
properly: the small bit of assembly code putting the DRAM in self-refresh and toggling the GPIOs to turn off power forgets to convert the values to little-endian.

This commit fixes that by making sure the two values we will write to the DRAM controller register and GPIO register are already in little-endian before entering the critical assembly code.

---
 arch/arm/mach-mvebu/pm-board.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -43,6 +43,9 @@ static void mvebu_armada_xp_gp_pm_enter(
 	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
 		ackcmd |= BIT(pic_raw_gpios[i]);
 
+	srcmd = cpu_to_le32(srcmd);
+	ackcmd = cpu_to_le32(ackcmd);
+
 	/*
 	 * Wait a while, the PIC needs quite a bit of time between the
 	 * two GPIO commands.

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Palik, Imre" <[email protected]>

[ Upstream commit 12b322ac85208de564ecf23aa754d796a91de21f ]

Commit edafc132baac ("xen-netback: making the bandwidth limiter runtime settable") introduced the capability to change the bandwidth rate limit at runtime. But it also introduced a possible crashing bug.

If netback receives two XenbusStateConnected without getting the hotplug-status watch firing in between, then it will try to register the watches for the rate limiter again. But this triggers a BUG() in the watch registration code.

The fix modifies connect() to remove the possibly existing packet-rate watches before trying to install those watches. This behaviour is in line with how connect() deals with the hotplug-status watch.

---
 drivers/net/xen-netback/xenbus.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -681,6 +681,9 @@ static int xen_register_watchers(struct
 	char *node;
 	unsigned maxlen = strlen(dev->nodename) + sizeof("/rate");
 
+	if (vif->credit_watch.node)
+		return -EADDRINUSE;
+
 	node = kmalloc(maxlen, GFP_KERNEL);
 	if (!node)
 		return -ENOMEM;

@@ -770,6 +773,7 @@ static void connect(struct backend_info
 	}
 
 	xen_net_read_rate(dev, &credit_bytes, &credit_usec);
+	xen_unregister_watchers(be->vif);
 	xen_register_watchers(dev, be->vif);
 	read_xenbus_vif_flags(be);
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: preeti <[email protected]>

commit cc5a2f7b8f39e7db559778f7913a2410257b3e50 upstream.

On some archs, the local clockevent device stops in deep cpuidle states. The broadcast framework is used to wakeup cpus in these idle states, in which either an external clockevent device is used to send wakeup ipis or the hrtimer broadcast framework kicks in in the absence of such a device. One cpu is nominated as the broadcast cpu and this cpu sends wakeup ipis to sleeping cpus at the appropriate time. This is the implementation in the oneshot mode of broadcast.

In periodic mode of broadcast however, the presence of such cpuidle states results in the cpuidle driver calling tick_broadcast_enable() which shuts down the local clockevent devices of all the cpus and appoints the tick broadcast device as the clockevent device for each of them. This works on those archs where the tick broadcast device is a real clockevent device. But on archs which depend on the hrtimer mode of broadcast, the tick broadcast device hapens to be a pseudo device. The consequence is that the local clockevent devices of all cpus are shutdown and the kernel hangs at boot time in periodic mode.

Let us thus not register the cpuidle states which have CPUIDLE_FLAG_TIMER_STOP flag set, on archs which depend on the hrtimer mode of broadcast in periodic mode. This patch takes care of doing this on powerpc. The cpus would not have entered into such deep cpuidle states in periodic mode on powerpc anyway. So there is no loss here.

---
 drivers/cpuidle/cpuidle-powernv.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

@@ -60,6 +60,8 @@ static int nap_loop(struct cpuidle_devic
 	return index;
 }
 
+/* Register for fastsleep only in oneshot mode of broadcast */
+#ifdef CONFIG_TICK_ONESHOT
 static int fastsleep_loop(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)

@@ -83,7 +85,7 @@ static int fastsleep_loop(struct cpuidle
 
 	return index;
 }
-
+#endif
 /*
  * States for dedicated partition case.
  */

@@ -209,7 +211,14 @@ static int powernv_add_idle_states(void)
 			powernv_states[nr_idle_states].flags = 0;
 			powernv_states[nr_idle_states].target_residency = 100;
 			powernv_states[nr_idle_states].enter = &nap_loop;
-		} else if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
+		}
+
+		/*
+		 * All cpuidle states with CPUIDLE_FLAG_TIMER_STOP set must come
+		 * within this config dependency check.
+		 */
+#ifdef CONFIG_TICK_ONESHOT
+		if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
 			flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
 			/* Add FASTSLEEP state */
 			strcpy(powernv_states[nr_idle_states].name, "FastSleep");

@@ -218,7 +227,7 @@ static int powernv_add_idle_states(void)
 			powernv_states[nr_idle_states].target_residency = 300000;
 			powernv_states[nr_idle_states].enter = &fastsleep_loop;
 		}
-
+#endif
 		powernv_states[nr_idle_states].exit_latency =
 				((unsigned int)latency_ns[i]) / 1000;
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <[email protected]>

commit 72e349f1124a114435e599479c9b8d14bfd1ebcd upstream.

When we take a PMU exception or a software event we call perf_read_regs(). This overloads regs->result with a boolean that describes if we should use the sampled instruction address register (SIAR) or the regs.

If the exception is in kernel, we start with the kernel regs and backtrace through the kernel stack. At this point we switch to the userspace regs and backtrace the user stack with perf_callchain_user().

Unfortunately these regs have not got the perf_read_regs() treatment, so regs->result could be anything. If it is non zero, perf_instruction_pointer() decides to use the SIAR, and we get issues like this:

0.11% qemu-system-ppc [kernel.kallsyms] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--52.35%-- 0
| |
| |--46.39%-- __hrtimer_start_range_ns
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | |
| | |--67.08%-- _raw_spin_lock_irqsave <--- hi mum
| | | |
| | | --100.00%-- 0x7e714
| | | 0x7e714

Notice the bogus _raw_spin_irqsave when we transition from kernel (system_call) to userspace (0x7e714). We inserted what was in the SIAR.

Add a check in regs_use_siar() to check that the regs in question are from a PMU exception. With this fix the backtrace makes sense:

0.47% qemu-system-ppc [kernel.vmlinux] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--53.83%-- 0
| |
| |--44.73%-- hrtimer_try_to_cancel
| | kvmppc_start_thread
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | __ioctl
| | 0x7e714
| | 0x7e714

---
 arch/powerpc/perf/core-book3s.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

@@ -131,7 +131,16 @@ static void pmao_restore_workaround(bool
 
 static bool regs_use_siar(struct pt_regs *regs)
 {
-	return !!regs->result;
+	/*
+	 * When we take a performance monitor exception the regs are setup
+	 * using perf_read_regs() which overloads some fields, in particular
+	 * regs->result to tell us whether to use SIAR.
+	 *
+	 * However if the regs are from another exception, eg. a syscall, then
+	 * they have not been setup using perf_read_regs() and so regs->result
+	 * is something random.
+	 */
+	return ((TRAP(regs) == 0xf00) && regs->result);
 }
 
 /*

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <[email protected]>

commit 3d9fecf6bfb8b12bc2f9a4c7109895a2a2bb9436 upstream.

We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI.

After d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there.

On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work.

Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB.

---
 arch/x86/pci/acpi.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -121,8 +121,10 @@ void __init pci_acpi_crs_quirks(void)
 {
 	int year;
 
-	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
-		pci_use_crs = false;
+	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008) {
+		if (iomem_resource.end <= 0xffffffff)
+			pci_use_crs = false;
+	}
 
 	dmi_check_system(pci_crs_quirks);
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jens Freimann <[email protected]>

commit f2ae45edbca7ba5324eef01719ede0151dc5cead upstream.

commit 6d3da24141 ("KVM: s390: deliver floating interrupts in order of priority") introduced a regression for the reset handling.

We don't clear the bitmap of pending floating interrupts and interrupt parameters. This could result in stale interrupts even after a reset. Let's fix this by clearing the pending bitmap and the parameters for service and machine check interrupts.

---
 arch/s390/kvm/interrupt.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -1606,6 +1606,9 @@ void kvm_s390_clear_float_irqs(struct kv
 	int i;
 
 	spin_lock(&fi->lock);
+	fi->pending_irqs = 0;
+	memset(&fi->srv_signal, 0, sizeof(fi->srv_signal));
+	memset(&fi->mchk, 0, sizeof(fi->mchk));
 	for (i = 0; i < FIRQ_LIST_COUNT; i++)
 		clear_irq_list(&fi->lists[i]);
 	for (i = 0; i < FIRQ_MAX_COUNT; i++)

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Holzheu <[email protected]>

commit b035b60ded132592055c0f9bd1cc280259c7de4b upstream.

Currently all backward jumps crash for JITed s390x eBPF programs with an illegal instruction program check and kernel panic. Because for negative values the opcode of the jump instruction is overriden by the negative branch offset an illegal instruction is generated by the JIT:

 000003ff802da378: c01100000002   lgfi    %r1,2
 000003ff802da37e: fffffff52065   unknown <-- illegal instruction
 000003ff802da384: b904002e       lgr     %r2,%r14

So fix this and mask the offset in order not to damage the opcode.

---
 arch/s390/net/bpf_jit_comp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -227,7 +227,7 @@ static inline void reg_set_seen(struct b
 ({								\
 	/* Branch instruction needs 6 bytes */			\
 	int rel = (addrs[i + off + 1] - (addrs[i + 1] - 6)) / 2;\
-	_EMIT6(op1 | reg(b1, b2) << 16 | rel, op2 | mask);	\
+	_EMIT6(op1 | reg(b1, b2) << 16 | (rel & 0xffff), op2 | mask);	\
 	REG_SET_SEEN(b1);					\
 	REG_SET_SEEN(b2);					\
 })

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <[email protected]>

[ Upstream commit 34b99df4e6256ddafb663c6de0711dceceddfe0e ]

ICMP messages can trigger ICMP and local errors. In this case serr->port is 0 and starting from Linux 4.0 we do not return the original target address to the error queue readers. Add function to define which errors provide addr_offset. With this fix my ping command is not silent anymore.

---
 net/ipv4/ip_sockglue.c |   11 ++++++++++-
 net/ipv6/datagram.c    |   12 +++++++++++-
 2 files changed, 21 insertions(+), 2 deletions(-)

@@ -432,6 +432,15 @@ void ip_local_error(struct sock *sk, int
 		kfree_skb(skb);
 }
 
+/* For some errors we have valid addr_offset even with zero payload and
+ * zero port. Also, addr_offset should be supported if port is set.
+ */
+static inline bool ipv4_datagram_support_addr(struct sock_exterr_skb *serr)
+{
+	return serr->ee.ee_origin == SO_EE_ORIGIN_ICMP ||
+	       serr->ee.ee_origin == SO_EE_ORIGIN_LOCAL || serr->port;
+}
+
 /* IPv4 supports cmsg on all imcp errors and some timestamps
  *
  * Timestamp code paths do not initialize the fields expected by cmsg:

@@ -498,7 +507,7 @@ int ip_recv_error(struct sock *sk, struc
 
 	serr = SKB_EXT_ERR(skb);
 
-	if (sin && serr->port) {
+	if (sin && ipv4_datagram_support_addr(serr)) {
 		sin->sin_family = AF_INET;
 		sin->sin_addr.s_addr = *(__be32 *)(skb_network_header(skb) +
 						   serr->addr_offset);

@@ -325,6 +325,16 @@ void ipv6_local_rxpmtu(struct sock *sk,
 	kfree_skb(skb);
 }
 
+/* For some errors we have valid addr_offset even with zero payload and
+ * zero port. Also, addr_offset should be supported if port is set.
+ */
+static inline bool ipv6_datagram_support_addr(struct sock_exterr_skb *serr)
+{
+	return serr->ee.ee_origin == SO_EE_ORIGIN_ICMP6 ||
+	       serr->ee.ee_origin == SO_EE_ORIGIN_ICMP ||
+	       serr->ee.ee_origin == SO_EE_ORIGIN_LOCAL || serr->port;
+}
+
 /* IPv6 supports cmsg on all origins aside from SO_EE_ORIGIN_LOCAL.
  *
  * At one point, excluding local errors was a quick test to identify icmp/icmp6

@@ -389,7 +399,7 @@ int ipv6_recv_error(struct sock *sk, str
 
 	serr = SKB_EXT_ERR(skb);
 
-	if (sin && serr->port) {
+	if (sin && ipv6_datagram_support_addr(serr)) {
 		const unsigned char *nh = skb_network_header(skb);
 		sin->sin6_family = AF_INET6;
 		sin->sin6_flowinfo = 0;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cornelia Huck <[email protected]>

commit 431dae778aea4eed31bd12e5ee82edc571cd4d70 upstream.

Eric noticed problems with vhost-scsi and virtio-ccw: vhost-scsi complained about overwriting values in the config space, which was triggered by a broken implementation of virtio-ccw's config get/set routines. It was probably sheer luck that we did not hit this before.

When writing a value to the config space, the WRITE_CONF ccw will always write from the beginning of the config space up to and including the value to be set. If the config space up to the value has not yet been retrieved from the device, however, we'll end up overwriting values. Keep track of the known config space and update if needed to avoid this.

Moreover, READ_CONF will only read the number of bytes it has been instructed to retrieve, so we must not copy more than that to the buffer, or we might overwrite trailing values.

---
 drivers/s390/kvm/virtio_ccw.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

@@ -65,6 +65,7 @@ struct virtio_ccw_device {
 	bool is_thinint;
 	bool going_away;
 	bool device_lost;
+	unsigned int config_ready;
 	void *airq_info;
 };
 

@@ -833,8 +834,11 @@ static void virtio_ccw_get_config(struct
 	if (ret)
 		goto out_free;
 
-	memcpy(vcdev->config, config_area, sizeof(vcdev->config));
-	memcpy(buf, &vcdev->config[offset], len);
+	memcpy(vcdev->config, config_area, offset + len);
+	if (buf)
+		memcpy(buf, &vcdev->config[offset], len);
+	if (vcdev->config_ready < offset + len)
+		vcdev->config_ready = offset + len;
 
 out_free:
 	kfree(config_area);

@@ -857,6 +861,9 @@ static void virtio_ccw_set_config(struct
 	if (!config_area)
 		goto out_free;
 
+	/* Make sure we don't overwrite fields. */
+	if (vcdev->config_ready < offset)
+		virtio_ccw_get_config(vdev, 0, NULL, offset);
 	memcpy(&vcdev->config[offset], buf, len);
 	/* Write the config area to the host. */
 	memcpy(config_area, vcdev->config, sizeof(vcdev->config));

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eran Ben Elisha <[email protected]>

[ Upstream commit 0eb08514fdbdcd16fd6870680cd638f203662e9d ]

TX ring QP wasn't released at mlx4_en_destroy_tx_ring. Instead, the code used the deprecated base_tx_qpn field. Move TX QP release to mlx4_en_destroy_tx_ring and remove the base_tx_qpn field.

---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |    4 ----
 drivers/net/ethernet/mellanox/mlx4/en_tx.c     |    1 +
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |    1 -
 3 files changed, 1 insertion(+), 5 deletions(-)

@@ -1973,10 +1973,6 @@ void mlx4_en_free_resources(struct mlx4_
 			mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
 	}
 
-	if (priv->base_tx_qpn) {
-		mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
-		priv->base_tx_qpn = 0;
-	}
 }
 
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)

@@ -180,6 +180,7 @@ void mlx4_en_destroy_tx_ring(struct mlx4
 		mlx4_bf_free(mdev->dev, &ring->bf);
 	mlx4_qp_remove(mdev->dev, &ring->qp);
 	mlx4_qp_free(mdev->dev, &ring->qp);
+	mlx4_qp_release_range(priv->mdev->dev, ring->qpn, 1);
 	mlx4_en_unmap_buffer(&ring->wqres.buf);
 	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
 	kfree(ring->bounce_buf);

@@ -579,7 +579,6 @@ struct mlx4_en_priv {
 	int vids[128];
 	bool wol;
 	struct device *ddev;
-	int base_tx_qpn;
 	struct hlist_head mac_hash[MLX4_EN_MAC_HASH_SIZE];
 	struct hwtstamp_config hwtstamp_config;
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Shamay <[email protected]>

[ Upstream commit 488a9b48e398b157703766e2cd91ea45ac6997c5 ]

Indication of a single completed packet, marked by txbbs_skipped being bigger then zero, in not enough in order to wake up a stopped TX queue. The completed packet may contain a single TXBB, while next packet to be sent (after the wake up) may have multiple TXBBs (LSO/TSO packets for example), causing overflow in queue followed by WQE corruption and TX queue timeout.
Instead, wake the stopped queue only when there's enough room for the worst case (maximum sized WQE) packet that we should need to handle after the queue is opened again.

Also created an helper routine - mlx4_en_is_tx_ring_full, which checks if the current TX ring is full or not. It provides better code readability and removes code duplication.

---
 drivers/net/ethernet/mellanox/mlx4/en_tx.c   |   19 +++++++++++--------
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h |    1 +
 2 files changed, 12 insertions(+), 8 deletions(-)

@@ -66,6 +66,7 @@ int mlx4_en_create_tx_ring(struct mlx4_e
 	ring->size = size;
 	ring->size_mask = size - 1;
 	ring->stride = stride;
+	ring->full_size = ring->size - HEADROOM - MAX_DESC_TXBBS;
 
 	tmp = size * sizeof(struct mlx4_en_tx_info);
 	ring->tx_info = kmalloc_node(tmp, GFP_KERNEL | __GFP_NOWARN, node);

@@ -232,6 +233,11 @@ void mlx4_en_deactivate_tx_ring(struct m
 		       MLX4_QP_STATE_RST, NULL, 0, 0, &ring->qp);
 }
 
+static inline bool mlx4_en_is_tx_ring_full(struct mlx4_en_tx_ring *ring)
+{
+	return ring->prod - ring->cons > ring->full_size;
+}
+
 static void mlx4_en_stamp_wqe(struct mlx4_en_priv *priv,
 			      struct mlx4_en_tx_ring *ring, int index,
 			      u8 owner)

@@ -474,11 +480,10 @@ static bool mlx4_en_process_tx_cq(struct
 
 	netdev_tx_completed_queue(ring->tx_queue, packets, bytes);
 
-	/*
-	 * Wakeup Tx queue if this stopped, and at least 1 packet
-	 * was completed
+	/* Wakeup Tx queue if this stopped, and ring is not full.
 	 */
-	if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) {
+	if (netif_tx_queue_stopped(ring->tx_queue) &&
+	    !mlx4_en_is_tx_ring_full(ring)) {
 		netif_tx_wake_queue(ring->tx_queue);
 		ring->wake_queue++;
 	}

@@ -922,8 +927,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff
 	skb_tx_timestamp(skb);
 
 	/* Check available TXBBs And 2K spare for prefetch */
-	stop_queue = (int)(ring->prod - ring_cons) >
-		      ring->size - HEADROOM - MAX_DESC_TXBBS;
+	stop_queue = mlx4_en_is_tx_ring_full(ring);
 	if (unlikely(stop_queue)) {
 		netif_tx_stop_queue(ring->tx_queue);
 		ring->queue_stopped++;

@@ -992,8 +996,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff
 		smp_rmb();
 
 		ring_cons = ACCESS_ONCE(ring->cons);
-		if (unlikely(((int)(ring->prod - ring_cons)) <=
-			     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
+		if (unlikely(!mlx4_en_is_tx_ring_full(ring))) {
 			netif_tx_wake_queue(ring->tx_queue);
 			ring->wake_queue++;
 		}

@@ -279,6 +279,7 @@ struct mlx4_en_tx_ring {
 	u32			size; /* number of TXBBs */
 	u32			size_mask;
 	u16			stride;
+	u32			full_size;
 	u16			cqn;	/* index of port CQ associated with this ring */
 	u32			buf_size;
 	__be32			doorbell_qpn;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Shamay <[email protected]>

[ Upstream commit 79a258526ce1051cb9684018c25a89d51ac21be8 ]

The check_csum() function relied on hwtstamp_rx_filter to know if rxvlan offload is disabled. This is wrong since rxvlan offload can be switched on/off regardless of hwtstamp_rx_filter.

Also moved check_csum to query CQE information to identify VLAN packets and removed the check of IP packets, since it has been validated before.

---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c |   17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

@@ -723,7 +723,7 @@ static int get_fixed_ipv6_csum(__wsum hw
 }
 #endif
 static int check_csum(struct mlx4_cqe *cqe, struct sk_buff *skb, void *va,
-		      int hwtstamp_rx_filter)
+		      netdev_features_t dev_features)
 {
 	__wsum hw_checksum = 0;
 

@@ -731,14 +731,8 @@ static int check_csum(struct mlx4_cqe *c
 
 	hw_checksum = csum_unfold((__force __sum16)cqe->checksum);
 
-	if (((struct ethhdr *)va)->h_proto == htons(ETH_P_8021Q) &&
-	    hwtstamp_rx_filter != HWTSTAMP_FILTER_NONE) {
-		/* next protocol non IPv4 or IPv6 */
-		if (((struct vlan_hdr *)hdr)->h_vlan_encapsulated_proto
-		    != htons(ETH_P_IP) &&
-		    ((struct vlan_hdr *)hdr)->h_vlan_encapsulated_proto
-		    != htons(ETH_P_IPV6))
-			return -1;
+	if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_VLAN_PRESENT_MASK) &&
+	    !(dev_features & NETIF_F_HW_VLAN_CTAG_RX)) {
 		hw_checksum = get_fixed_vlan_csum(hw_checksum, hdr);
 		hdr += sizeof(struct vlan_hdr);
 	}

@@ -901,7 +895,8 @@ int mlx4_en_process_rx_cq(struct net_dev
 
 			if (ip_summed == CHECKSUM_COMPLETE) {
 				void *va = skb_frag_address(skb_shinfo(gro_skb)->frags);
-				if (check_csum(cqe, gro_skb, va, ring->hwtstamp_rx_filter)) {
+				if (check_csum(cqe, gro_skb, va,
+					       dev->features)) {
 					ip_summed = CHECKSUM_NONE;
 					ring->csum_none++;
 					ring->csum_complete--;

@@ -956,7 +951,7 @@ int mlx4_en_process_rx_cq(struct net_dev
 		}
 
 		if (ip_summed == CHECKSUM_COMPLETE) {
-			if (check_csum(cqe, skb, skb->data, ring->hwtstamp_rx_filter)) {
+			if (check_csum(cqe, skb, skb->data, dev->features)) {
 				ip_summed = CHECKSUM_NONE;
 				ring->csum_complete--;
 				ring->csum_none++;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 51f458d9612177f69c2e2c437034ae15f93078e7 ]

Unfortunately, Michal's change to fix AP_VLAN crypto tailroom caused a locking issue that was reported by lockdep, but only in a few cases - the issue was a classic ABBA deadlock caused by taking the mtx after the key_mtx, where normally they're taken the other way around.

As the key mutex protects the field in question (I'm adding a few annotations to make that clear) only the iteration needs to be protected, but we can also iterate the interface list with just RCU protection while holding the key mutex.

---
 net/mac80211/key.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

@@ -66,12 +66,15 @@ update_vlan_tailroom_need_count(struct i
 	if (sdata->vif.type != NL80211_IFTYPE_AP)
 		return;
 
-	mutex_lock(&sdata->local->mtx);
+	/* crypto_tx_tailroom_needed_cnt is protected by this */
+	assert_key_lock(sdata->local);
 
-	list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(vlan, &sdata->u.ap.vlans, u.vlan.list)
 		vlan->crypto_tx_tailroom_needed_cnt += delta;
 
-	mutex_unlock(&sdata->local->mtx);
+	rcu_read_unlock();
 }
 
 static void increment_tailroom_need_count(struct ieee80211_sub_if_data *sdata)

@@ -95,6 +98,8 @@ static void increment_tailroom_need_coun
 	 * http://mid.gmane.org/[email protected]
 	 */
 
+	assert_key_lock(sdata->local);
+
 	update_vlan_tailroom_need_count(sdata, 1);
 
 	if (!sdata->crypto_tx_tailroom_needed_cnt++) {

@@ -109,6 +114,8 @@ static void increment_tailroom_need_coun
 static void decrease_tailroom_need_count(struct ieee80211_sub_if_data *sdata,
 					 int delta)
 {
+	assert_key_lock(sdata->local);
+
 	WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt < delta);
 
 	update_vlan_tailroom_need_count(sdata, -delta);

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Or Gerlitz <[email protected]>

[ Upstream commit 7254acffeeec3c0a75b9c5364c29a6eb00014930 ]

When in HA mode, the driver exposes an IB (RoCE) device instance with only one port. Under SRIOV, the existing implementation doesn't go well with the PF RoCE driver's role of Special QPs Para-Virtualization, etc.

As such, disable HA for the mlx4 PF RoCE device in SRIOV mode.

---
 drivers/net/ethernet/mellanox/mlx4/intf.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -93,8 +93,14 @@ int mlx4_register_interface(struct mlx4_
 	mutex_lock(&intf_mutex);
 
 	list_add_tail(&intf->list, &intf_list);
-	list_for_each_entry(priv, &dev_list, dev_list)
+	list_for_each_entry(priv, &dev_list, dev_list) {
+		if (mlx4_is_mfunc(&priv->dev) && (intf->flags & MLX4_INTFF_BONDING)) {
+			mlx4_dbg(&priv->dev,
+				 "SRIOV, disabling HA mode for intf proto %d\n", intf->protocol);
+			intf->flags &= ~MLX4_INTFF_BONDING;
+		}
 		mlx4_add_device(intf, priv);
+	}
 
 	mutex_unlock(&intf_mutex);
 

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mugunthan V N <[email protected]>

[ Upstream commit eb686231fce3770299760f24fdcf5ad041f44153 ]

When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine.

---
 drivers/net/phy/phy_device.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -796,10 +796,11 @@ static int genphy_config_advert(struct p
 	if (phydev->supported & (SUPPORTED_1000baseT_Half |
 				 SUPPORTED_1000baseT_Full)) {
 		adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
-		if (adv != oldadv)
-			changed = 1;
 	}
 
+	if (adv != oldadv)
+		changed = 1;
+
 	err = phy_write(phydev, MII_CTRL1000, adv);
 	if (err < 0)
 		return err;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit 2426f3910069ed47c0cc58559a6d088af7920201 upstream.

file_remove_suid() could mistakenly set S_NOSEC inode bit when root was modifying the file. As a result following writes to the file by ordinary user would avoid clearing suid or sgid bits.

Fix the bug by checking actual mode bits before setting S_NOSEC.

---
 fs/inode.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1693,8 +1693,8 @@ int file_remove_suid(struct file *file)
 		error = security_inode_killpriv(dentry);
 	if (!error && killsuid)
 		error = __remove_suid(dentry, killsuid);
-	if (!error && (inode->i_sb->s_flags & MS_NOSEC))
-		inode->i_flags |= S_NOSEC;
+	if (!error)
+		inode_has_no_xattr(inode);
 
 	return error;
 }

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabian Frederick <[email protected]>

commit 13b987ea275840d74d9df9a44326632fab1894da upstream.

This reverts commit 9ef7db7f38d0 ("ufs: fix deadlocks introduced by sb mutex merge") That patch tried to solve commit 0244756edc4b98c ("ufs: sb mutex merge + mutex_destroy") which is itself partially reverted due to multiple deadlocks.

---
 fs/ufs/inode.c |    5 ++++-
 fs/ufs/namei.c |   14 ++++++++------
 2 files changed, 12 insertions(+), 7 deletions(-)

@@ -902,6 +902,9 @@ void ufs_evict_inode(struct inode * inod
 	invalidate_inode_buffers(inode);
 	clear_inode(inode);
 
-	if (want_delete)
+	if (want_delete) {
+		lock_ufs(inode->i_sb);
 		ufs_free_inode(inode);
+		unlock_ufs(inode->i_sb);
+	}
 }

@@ -128,12 +128,12 @@ static int ufs_symlink (struct inode * d
 	if (l > sb->s_blocksize)
 		goto out_notlocked;
 
+	lock_ufs(dir->i_sb);
 	inode = ufs_new_inode(dir, S_IFLNK | S_IRWXUGO);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
-		goto out_notlocked;
+		goto out;
 
-	lock_ufs(dir->i_sb);
 	if (l > UFS_SB(sb)->s_uspi->s_maxsymlinklen) {
 		/* slow symlink */
 		inode->i_op = &ufs_symlink_inode_operations;

@@ -184,9 +184,13 @@ static int ufs_mkdir(struct inode * dir,
 	struct inode * inode;
 	int err;
 
+	lock_ufs(dir->i_sb);
+	inode_inc_link_count(dir);
+
 	inode = ufs_new_inode(dir, S_IFDIR|mode);
+	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
-		return PTR_ERR(inode);
+		goto out_dir;
 
 	inode->i_op = &ufs_dir_inode_operations;
 	inode->i_fop = &ufs_dir_operations;

@@ -194,9 +198,6 @@ static int ufs_mkdir(struct inode * dir,
 
 	inode_inc_link_count(inode);
 
-	lock_ufs(dir->i_sb);
-	inode_inc_link_count(dir);
-
 	err = ufs_make_empty(inode, dir);
 	if (err)
 		goto out_fail;

@@ -215,6 +216,7 @@ out_fail:
 	inode_dec_link_count(inode);
 	unlock_new_inode(inode);
 	iput (inode);
+out_dir:
 	inode_dec_link_count(dir);
 	unlock_ufs(dir->i_sb);
 	goto out;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <[email protected]>

commit 4839ddc27b7212ec58874f62c97da7400c8523be upstream.

Commit fd1d0ddf2ae9 (KVM: arm/arm64: check IRQ number on userland injection) rightly limited the range of interrupts userspace can inject in a guest, but failed to consider the (unlikely) case where a guest is configured with 1024 interrupts.

In this case, interrupts ranging from 1020 to 1023 are unuseable, as they have a special meaning for the GIC CPU interface.

Make sure that these number cannot be used as an IRQ. Also delete a redundant (and similarily buggy) check in kvm_set_irq.

---
 virt/kvm/arm/vgic.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

@@ -1561,7 +1561,7 @@ int kvm_vgic_inject_irq(struct kvm *kvm,
 			goto out;
 	}
 
-	if (irq_num >= kvm->arch.vgic.nr_irqs)
+	if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020))
 		return -EINVAL;
 
 	vcpu_id = vgic_update_irq_pending(kvm, cpuid, irq_num, level);

@@ -2161,10 +2161,7 @@ int kvm_set_irq(struct kvm *kvm, int irq
 
 	BUG_ON(!vgic_initialized(kvm));
 
-	if (spi > kvm->arch.vgic.nr_irqs)
-		return -EINVAL;
 	return kvm_vgic_inject_irq(kvm, 0, spi, level);
-
 }
 
 /* MSI not implemented yet */

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabian Frederick <[email protected]>

commit cdd9eefdf905e92e7fc6cc393314efe68dc6ff66 upstream.

Commit 0244756edc4b98c ("ufs: sb mutex merge + mutex_destroy") generated deadlocks in read/write mode on mkdir.

This patch partially reverts it keeping fixes by Andrew Morton and mutex_destroy()

[AV: fixed a missing bit in ufs_remount()]

---
 fs/ufs/balloc.c |   34 +++++++++++++++++-----------------
 fs/ufs/ialloc.c |   16 ++++++++--------
 fs/ufs/super.c  |   10 ++++++++++
 fs/ufs/ufs.h    |    1 +
 4 files changed, 36 insertions(+), 25 deletions(-)

@@ -51,8 +51,8 @@ void ufs_free_fragments(struct inode *in
 	
 	if (ufs_fragnum(fragment) + count > uspi->s_fpg)
 		ufs_error (sb, "ufs_free_fragments", "internal error");
-	
-	lock_ufs(sb);
+
+	mutex_lock(&UFS_SB(sb)->s_lock);
 	
 	cgno = ufs_dtog(uspi, fragment);
 	bit = ufs_dtogd(uspi, fragment);

@@ -115,13 +115,13 @@ void ufs_free_fragments(struct inode *in
 	if (sb->s_flags & MS_SYNCHRONOUS)
 		ubh_sync_block(UCPI_UBH(ucpi));
 	ufs_mark_sb_dirty(sb);
-	
-	unlock_ufs(sb);
+
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	UFSD("EXIT\n");
 	return;
 
 failed:
-	unlock_ufs(sb);
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	UFSD("EXIT (FAILED)\n");
 	return;
 }

@@ -151,7 +151,7 @@ void ufs_free_blocks(struct inode *inode
 		goto failed;
 	}
 
-	lock_ufs(sb);
+	mutex_lock(&UFS_SB(sb)->s_lock);
 	
 do_more:
 	overflow = 0;

@@ -211,12 +211,12 @@ do_more:
 	}
 
 	ufs_mark_sb_dirty(sb);
-	unlock_ufs(sb);
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	UFSD("EXIT\n");
 	return;
 
 failed_unlock:
-	unlock_ufs(sb);
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 failed:
 	UFSD("EXIT (FAILED)\n");
 	return;

@@ -357,7 +357,7 @@ u64 ufs_new_fragments(struct inode *inod
 	usb1 = ubh_get_usb_first(uspi);
 	*err = -ENOSPC;
 
-	lock_ufs(sb);
+	mutex_lock(&UFS_SB(sb)->s_lock);
 	tmp = ufs_data_ptr_to_cpu(sb, p);
 
 	if (count + ufs_fragnum(fragment) > uspi->s_fpb) {

@@ -378,19 +378,19 @@ u64 ufs_new_fragments(struct inode *inod
 				  "fragment %llu, tmp %llu\n",
 				  (unsigned long long)fragment,
 				  (unsigned long long)tmp);
-			unlock_ufs(sb);
+			mutex_unlock(&UFS_SB(sb)->s_lock);
 			return INVBLOCK;
 		}
 		if (fragment < UFS_I(inode)->i_lastfrag) {
 			UFSD("EXIT (ALREADY ALLOCATED)\n");
-			unlock_ufs(sb);
+			mutex_unlock(&UFS_SB(sb)->s_lock);
 			return 0;
 		}
 	}
 	else {
 		if (tmp) {
 			UFSD("EXIT (ALREADY ALLOCATED)\n");
-			unlock_ufs(sb);
+			mutex_unlock(&UFS_SB(sb)->s_lock);
 			return 0;
 		}
 	}

@@ -399,7 +399,7 @@ u64 ufs_new_fragments(struct inode *inod
 	 * There is not enough space for user on the device
 	 */
 	if (!capable(CAP_SYS_RESOURCE) && ufs_freespace(uspi, UFS_MINFREE) <= 0) {
-		unlock_ufs(sb);
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		UFSD("EXIT (FAILED)\n");
 		return 0;
 	}

@@ -424,7 +424,7 @@ u64 ufs_new_fragments(struct inode *inod
 			ufs_clear_frags(inode, result + oldcount,
 					newcount - oldcount, locked_page != NULL);
 		}
-		unlock_ufs(sb);
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		UFSD("EXIT, result %llu\n", (unsigned long long)result);
 		return result;
 	}

@@ -439,7 +439,7 @@ u64 ufs_new_fragments(struct inode *inod
 						fragment + count);
 		ufs_clear_frags(inode, result + oldcount, newcount - oldcount,
 				locked_page != NULL);
-		unlock_ufs(sb);
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		UFSD("EXIT, result %llu\n", (unsigned long long)result);
 		return result;
 	}

@@ -477,7 +477,7 @@ u64 ufs_new_fragments(struct inode *inod
 		*err = 0;
 		UFS_I(inode)->i_lastfrag = max(UFS_I(inode)->i_lastfrag,
 						fragment + count);
-		unlock_ufs(sb);
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		if (newcount < request)
 			ufs_free_fragments (inode, result + newcount, request - newcount);
 		ufs_free_fragments (inode, tmp, oldcount);

@@ -485,7 +485,7 @@ u64 ufs_new_fragments(struct inode *inod
 		return result;
 	}
 
-	unlock_ufs(sb);
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	UFSD("EXIT (FAILED)\n");
 	return 0;
 }		

@@ -69,11 +69,11 @@ void ufs_free_inode (struct inode * inod
 	
 	ino = inode->i_ino;
 
-	lock_ufs(sb);
+	mutex_lock(&UFS_SB(sb)->s_lock);
 
 	if (!((ino > 1) && (ino < (uspi->s_ncg * uspi->s_ipg )))) {
 		ufs_warning(sb, "ufs_free_inode", "reserved inode or nonexistent inode %u\n", ino);
-		unlock_ufs(sb);
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		return;
 	}
 	

@@ -81,7 +81,7 @@ void ufs_free_inode (struct inode * inod
 	bit = ufs_inotocgoff (ino);
 	ucpi = ufs_load_cylinder (sb, cg);
 	if (!ucpi) {
-		unlock_ufs(sb);
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		return;
 	}
 	ucg = ubh_get_ucg(UCPI_UBH(ucpi));

@@ -115,7 +115,7 @@ void ufs_free_inode (struct inode * inod
 		ubh_sync_block(UCPI_UBH(ucpi));
 	
 	ufs_mark_sb_dirty(sb);
-	unlock_ufs(sb);
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	UFSD("EXIT\n");
 }
 

@@ -193,7 +193,7 @@ struct inode *ufs_new_inode(struct inode
 	sbi = UFS_SB(sb);
 	uspi = sbi->s_uspi;
 
-	lock_ufs(sb);
+	mutex_lock(&sbi->s_lock);
 
 	/*
 	 * Try to place the inode in its parent directory

@@ -331,21 +331,21 @@ cg_found:
 			sync_dirty_buffer(bh);
 		brelse(bh);
 	}
-	unlock_ufs(sb);
+	mutex_unlock(&sbi->s_lock);
 
 	UFSD("allocating inode %lu\n", inode->i_ino);
 	UFSD("EXIT\n");
 	return inode;
 
 fail_remove_inode:
-	unlock_ufs(sb);
+	mutex_unlock(&sbi->s_lock);
 	clear_nlink(inode);
 	unlock_new_inode(inode);
 	iput(inode);
 	UFSD("EXIT (FAILED): err %d\n", err);
 	return ERR_PTR(err);
 failed:
-	unlock_ufs(sb);
+	mutex_unlock(&sbi->s_lock);
 	make_bad_inode(inode);
 	iput (inode);
 	UFSD("EXIT (FAILED): err %d\n", err);

@@ -694,6 +694,7 @@ static int ufs_sync_fs(struct super_bloc
 	unsigned flags;
 
 	lock_ufs(sb);
+	mutex_lock(&UFS_SB(sb)->s_lock);
 
 	UFSD("ENTER\n");
 

@@ -711,6 +712,7 @@ static int ufs_sync_fs(struct super_bloc
 	ufs_put_cstotal(sb);
 
 	UFSD("EXIT\n");
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	unlock_ufs(sb);
 
 	return 0;

@@ -1277,6 +1279,7 @@ static int ufs_remount (struct super_blo
 
 	sync_filesystem(sb);
 	lock_ufs(sb);
+	mutex_lock(&UFS_SB(sb)->s_lock);
 	uspi = UFS_SB(sb)->s_uspi;
 	flags = UFS_SB(sb)->s_flags;
 	usb1 = ubh_get_usb_first(uspi);

@@ -1290,6 +1293,7 @@ static int ufs_remount (struct super_blo
 	new_mount_opt = 0;
 	ufs_set_opt (new_mount_opt, ONERROR_LOCK);
 	if (!ufs_parse_options (data, &new_mount_opt)) {
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		unlock_ufs(sb);
 		return -EINVAL;
 	}

@@ -1297,12 +1301,14 @@ static int ufs_remount (struct super_blo
 		new_mount_opt |= ufstype;
 	} else if ((new_mount_opt & UFS_MOUNT_UFSTYPE) != ufstype) {
 		pr_err("ufstype can't be changed during remount\n");
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		unlock_ufs(sb);
 		return -EINVAL;
 	}
 
 	if ((*mount_flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
 		UFS_SB(sb)->s_mount_opt = new_mount_opt;
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		unlock_ufs(sb);
 		return 0;
 	}

@@ -1326,6 +1332,7 @@ static int ufs_remount (struct super_blo
 	 */
 #ifndef CONFIG_UFS_FS_WRITE
 		pr_err("ufs was compiled with read-only support, can't be mounted as read-write\n");
+		mutex_unlock(&UFS_SB(sb)->s_lock);
 		unlock_ufs(sb);
 		return -EINVAL;
 #else

@@ -1335,11 +1342,13 @@ static int ufs_remount (struct super_blo
 		    ufstype != UFS_MOUNT_UFSTYPE_SUNx86 &&
 		    ufstype != UFS_MOUNT_UFSTYPE_UFS2) {
 			pr_err("this ufstype is read-only supported\n");
+			mutex_unlock(&UFS_SB(sb)->s_lock);
 			unlock_ufs(sb);
 			return -EINVAL;
 		}
 		if (!ufs_read_cylinder_structures(sb)) {
 			pr_err("failed during remounting\n");
+			mutex_unlock(&UFS_SB(sb)->s_lock);
 			unlock_ufs(sb);
 			return -EPERM;
 		}

@@ -1347,6 +1356,7 @@ static int ufs_remount (struct super_blo
 #endif
 	}
 	UFS_SB(sb)->s_mount_opt = new_mount_opt;
+	mutex_unlock(&UFS_SB(sb)->s_lock);
 	unlock_ufs(sb);
 	return 0;
 }

@@ -30,6 +30,7 @@ struct ufs_sb_info {
 	int work_queued; /* non-zero if the delayed work is queued */
 	struct delayed_work sync_work; /* FS sync delayed work */
 	spinlock_t work_lock; /* protects sync_work and work_queued */
+	struct mutex s_lock;
 };
 
 struct ufs_inode_info {

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Eric W. Biederman" <[email protected]>

commit 93e3bce6287e1fb3e60d3324ed08555b5bbafa89 upstream.

The warning message in prepend_path is unclear and outdated. It was added as a warning that the mechanism for generating names of pseudo files had been removed from prepend_path and d_dname should be used instead. Unfortunately the warning reads like a general warning, making it unclear what to do with it.

Remove the warning. The transition it was added to warn about is long over, and I added code several years ago which in rare cases causes the warning to fire on legitimate code, and the warning is now firing and scaring people for no good reason.

---
 fs/dcache.c |   11 -----------
 1 file changed, 11 deletions(-)

@@ -2927,17 +2927,6 @@ restart:
 				vfsmnt = &mnt->mnt;
 				continue;
 			}
-			/*
-			 * Filesystems needing to implement special "root names"
-			 * should do so with ->d_dname()
-			 */
-			if (IS_ROOT(dentry) &&
-			   (dentry->d_name.len != 1 ||
-			    dentry->d_name.name[0] != '/')) {
-				WARN(1, "Root dentry has weird name <%.*s>\n",
-				     (int) dentry->d_name.len,
-				     dentry->d_name.name);
-			}
 			if (!error)
 				error = is_mounted(vfsmnt) ? 1 : 2;
 			break;

4.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Eric W. Biederman" <[email protected]>

commit ceeb0e5d39fcdf4dca2c997bf225c7fc49200b37 upstream.

Limit the mounts fs_fully_visible considers to locked mounts. Unlocked can always be unmounted so considering them adds hassle but no security benefit.

---
 fs/namespace.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -3185,11 +3185,15 @@ bool fs_fully_visible(struct file_system
 		if (mnt->mnt.mnt_root != mnt->mnt.mnt_sb->s_root)
 			continue;
 
-		/* This mount is not fully visible if there are any child mounts
-		 * that cover anything except for empty directories.
+		/* This mount is not fully visible if there are any
+		 * locked child mounts that cover anything except for
+		 * empty directories.
 		 */
 		list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) {
 			struct inode *inode = child->mnt_mountpoint->d_inode;
+			/* Only worry about locked mounts */
+			if (!(mnt->mnt.mnt_flags & MNT_LOCKED))
+				continue;
 			if (!S_ISDIR(inode->i_mode))
 				goto next;
 			if (inode->i_nlink > 2)

Build results:

	total: 124 pass: 124 fail: 0
Qemu test results:
	total: 31 pass: 31 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Hello Greg,

                Here's the complete list of linux-next/UFS patches needed to stop regressions in write mode:

13b987ea2758
fs/ufs: revert "ufs: fix deadlocks introduced by sb mutex merge"

cdd9eefdf905
fs/ufs: restore s_lock mutex

12ecbb4b1d76
ufs: Fix warning from unlock_new_inode()

514d748f69c9
ufs: Fix possible deadlock when looking up directories

e4f95517f182
fs/ufs: restore s_lock mutex_init()

but I only see the 2 first ones in your 4.0/4.1 stable reviews...

Regards,
Fabian

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
[email protected] | (970) 217-8978

08.07.2015 10:35, Greg Kroah-Hartman пишет:

That's because those other ones weren't marked with a stable tag so I didn't catch them :(

I'll queue them up now, thanks for letting me know.

greg k-h

No, you will have to fix this in Linus's tree, right? So I'll take the patch that you get into there when that happens, I don't want to diverge from what is in that tree.

If you are reverting patches in Linus's tree, I'll take that as well.

thanks,

greg k-h

08.07.2015 20:36, Greg Kroah-Hartman пишет:

For Linus tree I am planning a new DT property to explicitly enable the inband status. I don't see any quick fix suitable for -stable, and new DT property will likely not be quickly accepted. If you don't want a revert, then the stable will likely have that regression for quite long, that's the warning.
OTOH, the revert will remove the support for my board, so I won't be able to even test it, which is also not perfect.

Hi,

I do not think the problem is to have a revert in -stable, it's more having in in Linus tree *first* ;-)

ATM, the priority is more on fixing the regressions the initial patch caused *for existing boards*. There were at least three boards which got hit by first regression during 4.1-rc and a new one on the table now that 4.1 is out. I understand your reluctance to revert the patch that made mvneta work for your custom board but it's unfair for others that are hit by the regressions it causes and have to spend time bisecting/fixing it.

Anyway, if you come w/ a fix, I can commit to test it on the boards I have.

Cheers,

a+

08.07.2015 22:36, Arnaud Ebalard пишет: