Skip to contentSkip to conversation

Tascam US-16x08 0644:8047

DISCUSSION Greg 1 participant 1 message Jul 9, 2015

lore
Share & tools
lore

Greg

author
#0 lore raw

Greetings,

I am fairly new to USB dev (in linux in particular, but also in general), but I would very much like to try to get support for the above device working in snd-usb-audio.

- Is this an appropriate place to discuss snd-usb-audio?
- Are there any recommended reading pointers for the quirk table?
- or any highly recommended USB reading material that I might not have found?

I patched parse_audio_format_rates_v2(), get_sample_rate_v2(), and set_sample_rate_v2(), and through some sort of beginner luck was able to get aplay audio out of the first two channels. That was incomplete hackery though (eg fixed sample rate), and I would like to learn how to properly add quirk support. There have been other reports that this device worked OOTB, but I fail to see how!

I've also been examining the traffic to the device with wireshark and a win7 vm, but the learning curve for USB is a bit steep, so I am digesting. (:

If anyone can provide suggestions on lsusb output alone, here's what I have:
http://pastebin.com/pA9MLQet

cheers,
Greg