Linux 4.1.4
Greg KH
maintainerI'm announcing the release of the 4.1.4 kernel.
All users of the 4.1 kernel series must upgrade.
The updated 4.1.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.1.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/ABI/testing/ima_policy | 26 Documentation/ABI/testing/sysfs-ata | 11 Documentation/ABI/testing/sysfs-bus-iio | 6 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt | 4 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt | 4 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt | 38 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt | 32 Documentation/devicetree/bindings/usb/atmel-usb.txt | 6 Documentation/kernel-parameters.txt | 10 Makefile | 2 arch/arm/boot/dts/at91-sama5d4ek.dts | 4 arch/arm/boot/dts/at91sam9g45.dtsi | 2 arch/arm/boot/dts/at91sam9x5.dtsi | 2 arch/arm/boot/dts/imx23.dtsi | 1 arch/arm/boot/dts/sama5d3.dtsi | 2 arch/arm/boot/dts/sama5d4.dtsi | 22 arch/arm/kernel/smp.c | 4 arch/arm/mach-dove/include/mach/irqs.h | 118 +-- arch/arm/mach-dove/irq.c | 8 arch/arm/vdso/vdsomunge.c | 56 - arch/arm64/kernel/smp.c | 4 arch/arm64/mm/hugetlbpage.c | 4 arch/arm64/net/bpf_jit.h | 4 arch/arm64/net/bpf_jit_comp.c | 29 arch/m68k/Kconfig.cpu | 41 - arch/m68k/include/asm/coldfire.h | 2 arch/openrisc/Kconfig | 4 arch/x86/mm/mmap.c | 7 arch/x86/mm/mpx.c | 20 block/bio.c | 15 crypto/asymmetric_keys/asymmetric_keys.h | 3 crypto/asymmetric_keys/asymmetric_type.c | 20 crypto/asymmetric_keys/x509_public_key.c | 23 drivers/acpi/acpi_lpss.c | 7 drivers/acpi/acpica/aclocal.h | 1 drivers/acpi/acpica/tbfadt.c | 21 drivers/acpi/acpica/tbutils.c | 34 drivers/acpi/acpica/tbxfload.c | 3 drivers/acpi/acpica/utxfinit.c | 10 drivers/acpi/osl.c | 12 drivers/acpi/resource.c | 184 ---- drivers/ata/libata-core.c | 23 drivers/ata/libata-eh.c | 13 drivers/ata/libata-scsi.c | 3 drivers/ata/libata-transport.c | 24 drivers/base/firmware_class.c | 16 drivers/base/power/clock_ops.c | 2 drivers/block/loop.c | 30 drivers/block/loop.h | 1 drivers/block/rbd.c | 4 drivers/bluetooth/btbcm.c | 11 drivers/bluetooth/btusb.c | 38 drivers/bus/arm-ccn.c | 2 drivers/char/agp/intel-gtt.c | 2 drivers/char/tpm/tpm-chip.c | 3 drivers/char/tpm/tpm_crb.c | 12 drivers/char/tpm/tpm_ibmvtpm.c | 5 drivers/clk/clk.c | 5 drivers/clk/qcom/clk-rcg2.c | 9 drivers/clk/ti/clk-dra7-atl.c | 5 drivers/clocksource/exynos_mct.c | 43 - drivers/dma/mv_xor.c | 72 + drivers/dma/mv_xor.h | 1 drivers/edac/octeon_edac-l2c.c | 2 drivers/edac/octeon_edac-lmc.c | 2 drivers/edac/octeon_edac-pc.c | 2 drivers/firmware/dmi_scan.c | 13 drivers/gpu/drm/bridge/ptn3460.c | 1 drivers/gpu/drm/drm_crtc.c | 12 drivers/gpu/drm/drm_dp_mst_topology.c | 67 + drivers/gpu/drm/drm_ioc32.c | 60 + drivers/gpu/drm/i915/i915_gem.c | 1 drivers/gpu/drm/i915/i915_gem_gtt.c | 6 drivers/gpu/drm/i915/i915_ioc32.c | 2 drivers/gpu/drm/i915/i915_irq.c | 13 drivers/gpu/drm/i915/i915_reg.h | 1 drivers/gpu/drm/i915/intel_display.c | 13 drivers/gpu/drm/i915/intel_drv.h | 1 drivers/gpu/drm/i915/intel_panel.c | 8 drivers/gpu/drm/i915/intel_ringbuffer.h | 7 drivers/gpu/drm/i915/intel_uncore.c | 26 drivers/gpu/drm/qxl/qxl_cmd.c | 1 drivers/gpu/drm/qxl/qxl_ioctl.c | 4 drivers/gpu/drm/radeon/ci_dpm.c | 2 drivers/gpu/drm/radeon/cik.c | 370 +++++---- drivers/gpu/drm/radeon/cik_sdma.c | 11 drivers/gpu/drm/radeon/evergreen.c | 392 +++++----- drivers/gpu/drm/radeon/r600.c | 155 ++- drivers/gpu/drm/radeon/radeon_audio.c | 36 drivers/gpu/drm/radeon/radeon_audio.h | 2 drivers/gpu/drm/radeon/radeon_cursor.c | 84 -- drivers/gpu/drm/radeon/radeon_device.c | 34 drivers/gpu/drm/radeon/radeon_fb.c | 1 drivers/gpu/drm/radeon/radeon_gart.c | 12 drivers/gpu/drm/radeon/radeon_gem.c | 2 drivers/gpu/drm/radeon/radeon_irq_kms.c | 2 drivers/gpu/drm/radeon/radeon_mode.h | 1 drivers/gpu/drm/radeon/radeon_object.c | 1 drivers/gpu/drm/radeon/si.c | 336 ++++---- drivers/gpu/drm/radeon/si_dpm.c | 1 drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 67 - drivers/gpu/drm/tegra/dpaux.c | 18 drivers/gpu/drm/vgem/vgem_drv.c | 2 drivers/hwmon/mcp3021.c | 14 drivers/hwmon/nct7802.c | 2 drivers/i2c/busses/i2c-at91.c | 70 + drivers/i2c/i2c-mux.c | 3 drivers/i2c/muxes/i2c-mux-pca9541.c | 4 drivers/i2c/muxes/i2c-mux-pca954x.c | 2 drivers/iio/accel/bmc150-accel.c | 2 drivers/iio/adc/Kconfig | 3 drivers/iio/adc/at91_adc.c | 8 drivers/iio/adc/rockchip_saradc.c | 4 drivers/iio/adc/twl4030-madc.c | 3 drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 11 drivers/iio/dac/ad5624r_spi.c | 4 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 18 drivers/iio/light/cm3323.c | 2 drivers/iio/light/tcs3414.c | 2 drivers/iio/proximity/sx9500.c | 2 drivers/iio/temperature/tmp006.c | 3 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 1 drivers/md/bitmap.c | 15 drivers/md/dm-cache-policy-cleaner.c | 3 drivers/md/dm-cache-policy-internal.h | 5 drivers/md/dm-cache-policy-mq.c | 41 - drivers/md/dm-cache-policy.h | 15 drivers/md/dm-cache-target.c | 58 - drivers/md/dm-stats.c | 2 drivers/md/dm-thin.c | 13 drivers/md/md.c | 9 drivers/md/persistent-data/dm-btree-remove.c | 6 drivers/md/persistent-data/dm-btree.c | 2 drivers/md/persistent-data/dm-space-map-metadata.c | 50 - drivers/media/dvb-frontends/af9013.c | 4 drivers/media/dvb-frontends/cx24116.c | 8 drivers/media/dvb-frontends/cx24117.c | 2 drivers/media/dvb-frontends/s5h1420.c | 2 drivers/media/pci/cx18/cx18-streams.c | 1 drivers/media/pci/saa7164/saa7164-encoder.c | 11 drivers/media/pci/saa7164/saa7164-vbi.c | 11 drivers/media/usb/dvb-usb/dib0700_core.c | 70 + drivers/media/usb/dvb-usb/dib0700_devices.c | 6 drivers/media/v4l2-core/videobuf2-core.c | 33 drivers/mmc/card/block.c | 10 drivers/mmc/host/sdhci.c | 9 drivers/net/ethernet/intel/e1000e/82571.c | 2 drivers/net/ethernet/intel/e1000e/ich8lan.c | 10 drivers/net/ethernet/intel/e1000e/netdev.c | 18 drivers/net/wireless/ath/ath9k/htc.h | 6 drivers/net/wireless/ath/ath9k/main.c | 12 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 5 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 drivers/net/wireless/iwlwifi/mvm/time-event.c | 15 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 16 drivers/net/wireless/rtlwifi/rtl8192ee/hw.c | 17 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 13 drivers/net/wireless/rtlwifi/rtl8723be/hw.c | 17 drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 20 drivers/nfc/st21nfcb/i2c.c | 10 drivers/nfc/st21nfcb/st21nfcb.c | 3 drivers/of/address.c | 2 drivers/of/base.c | 2 drivers/phy/phy-berlin-usb.c | 4 drivers/phy/phy-twl4030-usb.c | 1 drivers/pinctrl/mvebu/pinctrl-armada-370.c | 4 drivers/pinctrl/mvebu/pinctrl-armada-375.c | 4 drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 51 - drivers/pinctrl/mvebu/pinctrl-armada-39x.c | 2 drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 37 drivers/pinctrl/pinctrl-zynq.c | 11 drivers/platform/x86/dell-laptop.c | 8 drivers/platform/x86/ideapad-laptop.c | 10 drivers/pnp/system.c | 35 drivers/rtc/rtc-snvs.c | 30 drivers/staging/comedi/drivers/cb_pcimdas.c | 8 drivers/staging/rtl8712/rtl8712_recv.c | 3 drivers/staging/vt6655/device_main.c | 6 drivers/staging/vt6656/main_usb.c | 2 drivers/tty/serial/Kconfig | 2 drivers/tty/serial/atmel_serial.c | 9 drivers/tty/sysrq.c | 19 drivers/usb/core/devio.c | 2 drivers/usb/core/hcd.c | 7 drivers/usb/core/hub.c | 84 -- drivers/usb/core/usb.h | 1 drivers/usb/dwc3/ep0.c | 4 drivers/usb/dwc3/gadget.c | 10 drivers/usb/gadget/composite.c | 11 drivers/usb/gadget/function/f_fs.c | 6 drivers/usb/gadget/function/f_mass_storage.c | 16 drivers/usb/gadget/udc/mv_udc_core.c | 2 drivers/usb/host/ohci-q.c | 7 drivers/usb/host/xhci-mem.c | 2 drivers/usb/musb/musb_virthub.c | 4 drivers/usb/phy/phy-mxs-usb.c | 3 drivers/usb/serial/cp210x.c | 1 drivers/usb/serial/option.c | 1 drivers/usb/serial/usb-serial.c | 1 drivers/w1/slaves/w1_therm.c | 62 + drivers/watchdog/omap_wdt.c | 7 fs/9p/vfs_inode.c | 3 fs/9p/vfs_inode_dotl.c | 3 fs/btrfs/inode-map.c | 17 fs/btrfs/ioctl.c | 22 fs/btrfs/transaction.c | 4 fs/btrfs/tree-log.c | 14 fs/ext4/extents.c | 6 fs/ext4/indirect.c | 2 fs/ext4/inode.c | 45 - fs/ext4/mballoc.c | 16 fs/ext4/migrate.c | 17 fs/ext4/super.c | 4 fs/fuse/inode.c | 2 fs/hpfs/super.c | 18 fs/jbd2/checkpoint.c | 7 fs/jbd2/journal.c | 38 fs/nfs/flexfilelayout/flexfilelayout.c | 2 fs/nfs/flexfilelayout/flexfilelayoutdev.c | 7 fs/nfs/nfs3xdr.c | 2 fs/nfs/nfs4state.c | 2 fs/nfs/pnfs.c | 3 fs/nfs/write.c | 1 fs/overlayfs/readdir.c | 77 + fs/xfs/xfs_attr_inactive.c | 10 fs/xfs/xfs_symlink.c | 2 include/acpi/acpixf.h | 13 include/acpi/actypes.h | 1 include/drm/drm_atomic.h | 24 include/drm/drm_crtc.h | 2 include/drm/drm_dp_mst_helper.h | 4 include/linux/acpi.h | 10 include/linux/ata.h | 1 include/linux/buffer_head.h | 7 include/linux/compiler-intel.h | 2 include/linux/gpio/consumer.h | 15 include/linux/hid-sensor-hub.h | 1 include/linux/jbd2.h | 4 include/linux/libata.h | 3 include/linux/nfs_xdr.h | 2 include/linux/of.h | 5 include/uapi/drm/i915_drm.h | 8 kernel/power/Kconfig | 2 kernel/printk/printk.c | 11 kernel/trace/trace.h | 3 kernel/trace/trace_branch.c | 17 kernel/trace/trace_events_filter.c | 10 lib/bitmap.c | 17 mm/hugetlb.c | 19 mm/memory.c | 20 net/9p/client.c | 4 net/bluetooth/hci_sock.c | 26 net/ceph/osdmap.c | 2 net/ieee802154/socket.c | 6 net/mac80211/cfg.c | 1 net/mac80211/ibss.c | 1 net/mac80211/main.c | 3 net/mac80211/mesh.c | 1 net/sunrpc/backchannel_rqst.c | 2 net/wireless/util.c | 2 samples/trace_events/trace-events-sample.h | 7 security/integrity/evm/evm_main.c | 11 security/integrity/ima/ima.h | 2 security/integrity/ima/ima_fs.c | 4 security/integrity/ima/ima_policy.c | 124 ++- security/integrity/ima/ima_template_lib.c | 3 security/keys/keyring.c | 8 security/selinux/hooks.c | 3 security/selinux/ss/ebitmap.c | 6 sound/soc/codecs/max98925.c | 2 sound/soc/codecs/rt5645.c | 4 sound/soc/codecs/tas2552.c | 4 sound/soc/codecs/wm5102.c | 2 sound/soc/codecs/wm5110.c | 2 sound/soc/codecs/wm8737.c | 6 sound/soc/codecs/wm8903.h | 2 sound/soc/codecs/wm8955.c | 2 sound/soc/codecs/wm8960.c | 2 sound/soc/codecs/wm8997.c | 2 sound/soc/fsl/imx-wm8962.c | 2 sound/soc/omap/Kconfig | 5 sound/soc/qcom/Kconfig | 2 tools/perf/util/cloexec.c | 4 284 files changed, 2886 insertions(+), 1989 deletions(-)
AMAN DEEP (1):
usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function
Aaro Koskinen (1):
EDAC, octeon: Fix broken build due to model helper renames
Adriana Reus (1):
iio: inv-mpu: Specify the expected format/precision for write channels
Al Viro (3):
9p: forgetting to cancel request on interrupted zero-copy RPC 9p: don't leave a half-initialized inode sitting around p9_client_write(): avoid double p9_free_req()
Alan Stern (1):
USB: OHCI: Fix race between ED unlink and URB submission
Aleksei Mamlin (1):
libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
Aleksei Volkov (1):
Bluetooth: btusb: Correct typo in Roper Class 1 Bluetooth Dongle
Alex Deucher (6):
drm/radeon: take the mode_config mutex when dealing with hpds (v2) drm/radeon: clean up radeon_audio_enable
Revert "drm/radeon: dont switch vt on suspend" drm/radeon: only check the sink type on DP connectors drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5 drm/radeon/ci: silence a harmless PCC warning
Alexander Duyck (1):
e1000e: Cleanup handling of VLAN_HLEN as a part of max frame size
Alexander Sverdlin (3):
i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer()
i2c: mux: pca954x: Use __i2c_transfer because of quirks
i2c: use parent adapter quirks in mux
Alexey Khoroshilov (1):
usb: gadget: mv_udc_core: fix phy_regs I/O memory leak
Andrew Morton (1):
openrisc: fix CONFIG_UID16 setting
Andrey Ryabinin (1):
drm/atomic: fix out of bounds read in for_each_*_in_state helpers
Arnd Bergmann (5):
ASoC: qcom: remove incorrect dependencies
ASoC: omap: fix up SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency, again
serial: samsung: only use earlycon for console
tty: remove platform_sysrq_reset_seq
ideapad: fix software rfkill setting
Arne Fitzenreiter (2):
libata: add ATA_HORKAGE_NOTRIM
libata: force disable trim for SuperSSpeed S238
Axel Lin (4):
ASoC: max98925: Fix mask for setting DAI invert mode
ASoC: wm8737: Fixup setting VMID Impedance control register
ASoC: wm8955: Fix setting wrong register for WM8955_K_8_0_MASK bits
ASoC: wm8903: Fix define for WM8903_VMID_RES_250K
Boris Brezillon (1):
ARM: at91/dt: update udc compatible strings
Brian Foster (1):
xfs: don't truncate attribute extents if no extents exist
Chris Mason (1):
Bluetooth: btbcm: allow btbcm_read_verbose_config to fail on Apple
Chris Metcalf (1):
__bitmap_parselist: fix bug in empty string handling
Chris Wilson (3):
drm/i915: Declare the swizzling unknown for L-shaped configurations drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls agp/intel: Fix typo in needs_ilk_vtd_wa()
Christian König (1):
drm/radeon: fix user ptr race condition
Christoffer Dall (1):
arm64: Don't report clear pmds and puds as huge
Christophe Ricard (2):
NFC: st21nfcb: Do not remove header once the payload is sent
NFC: st21nfcb: remove st21nfcb_nci_i2c_disable
Chuck Lever (1):
NFS: Fix size of NFSACL SETACL operations
Chun-Yeow Yeoh (1):
mac80211: fix the beacon csa counter for mesh and ibss
Claudio Cappelli (1):
USB: option: add 2020:4000 ID
Colin Ian King (2):
KEYS: ensure we free the assoc array edit if edit is valid RDMA/ocrdma: fix double free on pd
Constantine Shulyupin (1):
hwmon: (nct7802) fix visibility of temp3
Cyrille Pitchen (1):
i2c: at91: fix a race condition when using the DMA controller
Damian Eppel (1):
clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier
Dan Carpenter (5):
ath9k_htc: memory corruption calling set_bit()
ASoC: imx-wm8962: Add a missing error check
USB: devio: fix a condition in async_completed()
ima: cleanup ima_init_policy() a little
ACPI / resources: free memory on error in add_region_before()
Daniel Baluta (2):
iio: ABI: Clarify proximity output value
iio: proximity: sx9500: Fix proximity value
Daniel Borkmann (1):
compiler-intel: fix wrong compiler barrier() macro
Daniel Kurtz (1):
drm/rockchip: use drm_gem_mmap helpers
Daniel Vetter (4):
drm/vgem: Set unique to "vgem"
drm/dp/mst: make sure mst_primary mstb is valid in work function Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
drm: Stop resetting connector state to unknown
Darrick J. Wong (1):
ext4: don't retry file block mapping on bigalloc fs with non-extent file
Dave Airlie (2):
drm/dp/mst: close deadlock in connector destruction. drm/dp/mst: take lock around looking up the branch device on hpd irq
David Fries (1):
w1_therm reference count family data
David Härdeman (1):
rc-core: fix dib0700 scancode generation for RC5
David Milburn (1):
libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
Dennis Yang (1):
dm btree remove: fix bug in redistribute3
Ding Wang (1):
mmc: card: Fixup request missing in mmc_blk_issue_rw_rq
Dmitry Monakhov (1):
jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()
Dmitry Tunin (1):
ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
Eliad Peller (1):
iwlwifi: mvm: fix ROC reference accounting
Eric Sandeen (1):
xfs: fix remote symlinks on V5/CRC filesystems
Eryu Guan (2):
ext4: be more strict when migrating to non-extent based file
ext4: correctly migrate a file with a hole at the beginning
Fabio Estevam (1):
iio: twl4030-madc: Pass the IRQF_ONESHOT flag
Felipe Balbi (2):
usb: dwc3: gadget: don't clear EP_BUSY too early
usb: musb: host: rely on port_mode to call musb_start()
Felix Fietkau (1):
ath9k: fix DMA stop sequence for AR9003+
Filipe Manana (6):
Btrfs: use kmem_cache_free when freeing entry in inode cache
Btrfs: fix race between caching kthread and returning inode to inode cache
Btrfs: fix fsync data loss after append write
Btrfs: fix memory leak in the extent_same ioctl
Btrfs: fix list transaction->pending_ordered corruption
Btrfs: fix file corruption after cloning inline extents
Firo Yang (2):
NFC: st21nfcb: Remove inappropriate kfree on a devm_kzalloc pointer
md: fix a build warning
Frediano Ziglio (2):
drm/qxl: Do not cause spice-server to clean our objects drm/qxl: Do not leak memory if qxl_release_list_add fails
Geert Uytterhoeven (3):
drm/bridge: ptn3460: Include linux/gpio/consumer.h
PM / clk: Fix clock error check in __pm_clk_add()
gpiolib: Add missing dummies for the unified device properties interface
Goldwyn Rodrigues (1):
md: Skip cluster setup for dm-raid
Greg Kroah-Hartman (1):
Linux 4.1.4
Greg Ungerer (2):
m68knommu: make ColdFire SoC selection a choice
m68knommu: force setting of CONFIG_CLOCK_FREQ for ColdFire
Grigori Goronzy (2):
drm/radeon: fix HDP flushing
drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2)
Haggai Eran (1):
staging: rtl8712: prevent buffer overrun in recvbuf2recvframe
Hai Li (1):
clk: qcom: Use parent rate when set rate to pixel RCG clock
Hans Verkuil (2):
cx18: add missing caps for the PCM video device
saa7164: fix querycap warning
Hartmut Knaack (3):
iio:light:cm3323: clear bitmask before set iio:adc:cc10001_adc: fix Kconfig dependency iio:accel:bmc150-accel: fix counting direction
Heiko Stuebner (1):
iio: adc: rockchip_saradc: add missing MODULE_* data
Hon Ching \\(Vicky\\) Lo (1):
vTPM: set virtual device before passing to ibmvtpm_reset_crq
Ian Abbott (1):
staging: comedi: cb_pcimdas: fix handlers for DI and DO subdevices
Ilya Dryomov (2):
crush: fix a bug in tree bucket decode
rbd: use GFP_NOIO in rbd_obj_request_create()
JM Friedt (1):
iio: DAC: ad5624r_spi: fix bit shift of output data value
Jan Leupold (1):
iio: adc: at91_adc: allow to use full range of startup time
Jani Nikula (1):
drm/i915: fix backlight after resume on 855gm
Jarkko Sakkinen (2):
tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add() tpm, tpm_crb: fail when TPM2 ACPI table contents look corrupted
Jason Gunthorpe (1):
tpm: Fix initialization of the cdev
Jean Delvare (1):
firmware: dmi_scan: Only honor end-of-table for 64-bit tables
Jeff Layton (3):
nfs: increase size of EXCHANGE_ID name string buffer
nfs: fix potential credential leak in ff_layout_update_mirror_cred
nfs: always update creds in mirror, even when we have an already connected ds
Jiang Liu (1):
ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel
Jingoo Han (1):
of/address: use atomic allocation in pci_register_io_range()
Joe Perches (1):
hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead
Joe Thornber (4):
dm cache: fix race when issuing a POLICY_REPLACE operation dm space map metadata: fix occasional leak of a metadata block on resize dm thin: allocate the cell_sort_array dynamically
dm btree: silence lockdep lock inversion in dm_btree_del()
Johannes Thumshirn (1):
USB: serial: Destroy serial_minors IDR on module exit
John Youn (1):
usb: dwc3: Reset the transfer resource index on SET_INTERFACE
Joseph Qi (1):
jbd2: fix ocfs2 corrupt when updating journal superblock fails
Jérôme Glisse (2):
drm/radeon: compute ring fix hibernation (CI GPU family) v2. drm/radeon: SDMA fix hibernation (CI GPU family).
Kirill A. Shutemov (2):
mm: avoid setting up anonymous pages into file mapping x86/mpx: Do not set ->vm_ops on MPX VMAs
Kishon Vijay Abraham I (1):
usb: gadget: composite: Fix NULL pointer dereference
Konstantin Khlebnikov (1):
of: return NUMA_NO_NODE from fallback of_node_to_nid()
Krzysztof Kozlowski (1):
clk: ti: dra7-atl-clock: Fix possible ERR_PTR dereference
Laurent Pinchart (1):
vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers
Lennert Buytenhek (1):
ieee802154: Fix sockaddr_ieee802154 implicit padding information leak.
Linus Torvalds (1):
Fix firmware loader uevent buffer NULL pointer dereference
Lior Amsalem (1):
dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
Lu Baolu (1):
usb: core: lpm: set lpm_capable for root hub device
Ludovic Desroches (1):
ARM: at91/dt: sama5d4ek: mci0 uses slot 0
Lukas Czerner (1):
ext4: fix reservation release on invalidatepage for delalloc fs
Lv Zheng (3):
ACPICA: Tables: Enable both 32-bit and 64-bit FACS
ACPICA: Tables: Fix an issue that FACS initialization is performed twice
ACPICA: Tables: Enable default 64-bit FADT addresses favor
Malcolm Priestley (3):
staging: vt6656: check ieee80211_bss_conf bssid not NULL
staging: vt6655: check ieee80211_bss_conf bssid not NULL
staging: vt6655: device_rx_srv check sk_buff is NULL
Marcel Holtmann (3):
Bluetooth: Fix race condition with user channel and setup stage
Bluetooth: btusb: Fix memory leak in Intel setup routine
Bluetooth: btusb: Fix secure send command length alignment on Intel 8260
Mario Kleiner (1):
drm/radeon: Handle irqs only based on irq ring, not irq status regs.
Martin K. Petersen (6):
libata: Do not blacklist Micron M500DC
libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
libata: Expose TRIM capability in sysfs
libata: Do not blacklist M510DC
block: Do a full clone when splitting discard bios
libata: Fix regression when the NCQ Send and Receive log page is absent
Masahiro Yamada (2):
pinctrl: zynq: fix DEFINE_ZYNQ_PINMUX_FUNCTION_MUX macro
pinctrl: zynq: fix offset address for {SD0,SD1}_WP_CD_SEL
Mauro Carvalho Chehab (4):
cx24117: fix a buffer overflow when checking userspace params
af9013: Don't accept invalid bandwidth
s5h1420: fix a buffer overflow when checking userspace params
cx24116: fix a buffer overflow when checking userspace params
Michal Hocko (1):
ext4: replace open coded nofail allocation in ext4_free_blocks()
Michal Kazior (2):
cfg80211: ignore netif running state when changing iftype
mac80211: prevent possible crypto tx tailroom corruption
Michal Nazarewicz (1):
usb: f_mass_storage: limit number of reported LUNs
Michel Dänzer (2):
drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
Michel Thierry (1):
drm/i915/ppgtt: Break loop in gen8_ppgtt_clear_range failure path
Miklos Szeredi (2):
fuse: initialize fc->release before calling it
ovl: lookup whiteouts outside iterate_dir()
Mikulas Patocka (2):
libata: increase the timeout when setting transfer mode dm stats: fix divide by zero if 'number_of_areas' arg is zero
Mimi Zohar (7):
KEYS: fix "ca_keys=" partial key matching
ima: do not measure or appraise the NSFS filesystem
evm: labeling pseudo filesystems exception
ima: fix ima_show_template_data_ascii()
ima: add support for new "euid" policy condition
ima: extend "mask" policy matching support
ima: update builtin policies
Ming Lei (2):
block: loop: convert to per-device workqueue
block: loop: avoiding too many pending per work I/O
Naoya Horiguchi (1):
mm/hugetlb: introduce minimum hugepage order
NeilBrown (3):
phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
md: clear mddev->private when it has been freed.
md: unlock mddev_lock on an error path.
Nicolas Boichat (1):
ASoC: rt5645: Init jack_detect_work before registering irq
Nicolas Ferre (2):
tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send
ARM: at91/dt: trivial: fix USB udc compatible string
Nikolay Borisov (2):
bufferhead: Add _gfp version for sb_getblk()
ext4: avoid deadlocks in the writeback path by using sb_getblk_gfp
Olga Kornievskaia (1):
fixing infinite OPEN loop in 4.0 stateid recovery
Omar Sandoval (1):
Btrfs: don't invalidate root dentry when subvolume deletion fails
Pali Rohár (1):
dell-laptop: Fix allocating & freeing SMI buffer page
Paul Moore (1):
selinux: don't waste ebitmap space when importing NetLabel categories
Pawel Moll (1):
bus: arm-ccn: Fix node->XP config conversion
Peter Meerwald (2):
iio: light: tcs3414: Fix bug preventing to set integration time
iio: tmp006: Check channel info on write
Peter Sanford (1):
USB: cp210x: add ID for Aruba Networks controllers
Peter Ujfalusi (2):
ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card
ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry
Rafael J. Wysocki (2):
ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage ACPI / LPSS: Fix up acpi_lpss_create_device()
Richard Fitzgerald (1):
ASoC: arizona: Fix noise generator gain TLV
Robert Schlabbach (1):
usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset
Roberto Sassu (1):
ima: skip measurement of cgroupfs files and update documentation
Rodrigo Vivi (1):
drm/i915: Fix IPS related flicker
Rui Miguel Silva (1):
usb: gadget: f_fs: do not set cancel function on synchronous {read,write}Russell King (1):
ARM: dove: fix legacy dove IRQ numbers
Sanidhya Kashyap (1):
hpfs: kstrdup() out of memory handling
Srikar Dronamraju (1):
perf bench numa: Fix to show proper convergence stats
Srinivas Pandruvada (1):
hid-sensor: Fix suspend/resume delay
Stefan Agner (1):
rtc: snvs: fix wakealarm by call enable_irq_wake earlier
Stefan Wahren (3):
usb: phy: mxs: suspend to RAM causes NULL pointer dereference
ARM: dts: mx23: fix iio-hwmon support
clk: Fix JSON output in debugfs
Stephen Boyd (2):
ARM64: smp: Fix suspicious RCU usage with ipi tracepoints
ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints
Stephen Smalley (1):
selinux: fix mprotect PROT_EXEC regression caused by mm change
Steven Rostedt (Red Hat) (5):
tracing/filter: Do not WARN on operand count going below zero tracing/filter: Do not allow infix to exceed end of string
tracing: Fix typo from "static inlin" to "static inline"
tracing: Have branch tracer use recursive field of task struct
tracing: Fix sample output of dynamic arrays
Stevens, Nick (1):
hwmon: (mcp3021) Fix broken output scaling
Subbaraya Sundeep Bhatta (2):
usb: dwc3: gadget: return error if command sent to DGCMD register fails
usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Szabolcs Nagy (1):
ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h
Takashi Iwai (1):
PM / sleep: Increase default DPM watchdog timeout to 60
Theodore Ts'o (4):
ext4: fix race between truncate and __ext4_journalled_writepage()
ext4: call sync_blockdev() before invalidate_bdev() in put_super()
ext4: set lazytime on remount if MS_LAZYTIME is set by mount
ext4: fix fencepost error in lazytime optimization
Thierry Reding (1):
drm/tegra: dpaux: Fix transfers larger than 4 bytes
Thomas Hebb (1):
phy: berlin-usb: fix divider for BG2CD
Thomas Petazzoni (9):
pinctrl: mvebu: armada-370: fix spi0 pin description
pinctrl: mvebu: armada-375: remove incorrect space in pin description
pinctrl: mvebu: armada-375: remove non-existing NAND re/we pins
pinctrl: mvebu: armada-38x: fix PCIe functions
pinctrl: mvebu: armada-38x: fix incorrect total number of GPIOs
pinctrl: mvebu: armada-39x: fix incorrect total number of GPIOs
pinctrl: mvebu: armada-xp: remove non-existing NAND pins
pinctrl: mvebu: armada-xp: remove non-existing VDD cpu_pd functions
pinctrl: mvebu: armada-xp: fix functions of MPP48
Thomas Reitmayr (1):
media: Fix regression in some more dib0700 based devices
Tomas Elf (1):
drm/i915: Snapshot seqno of most recently submitted request.
Tomas Winkler (1):
mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
Trond Myklebust (4):
pNFS: Fix a memory leak when attempted pnfs fails pNFS/flexfiles: Fix the reset of struct pgio_header when resending
NFS: Ensure we set NFS_CONTEXT_RESEND_WRITES when requeuing writes
SUNRPC: Fix a memory leak in the backchannel code
Tvrtko Ursulin (2):
drm/i915: Forward all core DRM ioctls to core compat handling
drm: Provide compat ioctl for addfb2.1
Ulf Hansson (1):
mmc: sdhci: Restore behavior while creating OCR mask
Uwe Kleine-König (1):
watchdog: omap: assert the counter being stopped before reprogramming
Vasily Averin (1):
security_syslog() should be called once only
Vincent Fann (1):
rtlwifi: Remove the clear interrupt routine from all drivers
Xi Wang (2):
arm64: bpf: fix out-of-bounds read in bpf2a64_offset()
arm64: bpf: fix endianness conversion bugs
Zhao Junwang (1):
drm: add a check for x/y in drm_mode_setcrtc
Zidan Wang (1):
ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]
[email protected] (1):
ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes
Greg KH
maintainerDocumentation/ABI/testing/ima_policy +19 -7
@@ -20,17 +20,19 @@ Description: action: measure | dont_measure | appraise | dont_appraise | audit condition:= base | lsm [option] base: [[func=] [mask=] [fsmagic=] [fsuuid=] [uid=] - [fowner]] + [euid=] [fowner=]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] option: [[appraise_type=]] [permit_directio] base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] [FIRMWARE_CHECK] - mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] + mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] + [[^]MAY_EXEC] fsmagic:= hex value fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6) uid:= decimal value + euid:= decimal value fowner:=decimal value lsm: are LSM specific option: appraise_type:= [imasig]
@@ -49,11 +51,25 @@ Description: dont_measure fsmagic=0x01021994 dont_appraise fsmagic=0x01021994 # RAMFS_MAGIC - dont_measure fsmagic=0x858458f6 dont_appraise fsmagic=0x858458f6 + # DEVPTS_SUPER_MAGIC + dont_measure fsmagic=0x1cd1 + dont_appraise fsmagic=0x1cd1 + # BINFMTFS_MAGIC + dont_measure fsmagic=0x42494e4d + dont_appraise fsmagic=0x42494e4d # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 dont_appraise fsmagic=0x73636673 + # SELINUX_MAGIC + dont_measure fsmagic=0xf97cff8c + dont_appraise fsmagic=0xf97cff8c + # CGROUP_SUPER_MAGIC + dont_measure fsmagic=0x27e0eb + dont_appraise fsmagic=0x27e0eb + # NSFS_MAGIC + dont_measure fsmagic=0x6e736673 + dont_appraise fsmagic=0x6e736673 measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC
@@ -70,10 +86,6 @@ Description: Examples of LSM specific definitions: SELinux: - # SELINUX_MAGIC - dont_measure fsmagic=0xf97cff8c - dont_appraise fsmagic=0xf97cff8c - dont_measure obj_type=var_log_t dont_appraise obj_type=var_log_t dont_measure obj_type=auditd_log_t
Documentation/ABI/testing/sysfs-ata +11 -0
@@ -90,6 +90,17 @@ gscr 130: SATA_PMP_GSCR_SII_GPIO Only valid if the device is a PM. +trim + + Shows the DSM TRIM mode currently used by the device. Valid + values are: + unsupported: Drive does not support DSM TRIM + unqueued: Drive supports unqueued DSM TRIM only + queued: Drive supports queued DSM TRIM + forced_unqueued: Drive's unqueued DSM support is known to be + buggy and only unqueued TRIM commands + are sent + spdn_cnt Number of time libata decided to lower the speed of link due to errors.
Documentation/ABI/testing/sysfs-bus-iio +2 -4
@@ -1165,10 +1165,8 @@ Description: object is near the sensor, usually be observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion - to SI units is not possible. Where it is, the units should - be meters. If such a conversion is not possible, the reported - values should behave in the same way as a distance, i.e. lower - values indicate something is closer to the sensor. + to SI units is not possible. Higher proximity measurements + indicate closer objects, and vice versa. What: /sys/.../iio:deviceX/in_illuminance_input What: /sys/.../iio:deviceX/in_illuminance_raw
Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt +2 -2
@@ -92,5 +92,5 @@ mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk) mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0), audio(mclk), uart0(cts) mpp63 63 gpo, spi0(sck), tclk -mpp64 64 gpio, spi0(miso), spi0-1(cs1) -mpp65 65 gpio, spi0(mosi), spi0-1(cs2) +mpp64 64 gpio, spi0(miso), spi0(cs1) +mpp65 65 gpio, spi0(mosi), spi0(cs2)
Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt +2 -2
@@ -22,8 +22,8 @@ mpp5 5 gpio, dev(ad7), spi0(cs2), spi1(cs2) mpp6 6 gpio, dev(ad0), led(p1), audio(rclk) mpp7 7 gpio, dev(ad1), ptp(clk), led(p2), audio(extclk) mpp8 8 gpio, dev (bootcs), spi0(cs0), spi1(cs0) -mpp9 9 gpio, nf(wen), spi0(sck), spi1(sck) -mpp10 10 gpio, nf(ren), dram(vttctrl), led(c1) +mpp9 9 gpio, spi0(sck), spi1(sck), nand(we) +mpp10 10 gpio, dram(vttctrl), led(c1), nand(re) mpp11 11 gpio, dev(a0), led(c2), audio(sdo) mpp12 12 gpio, dev(a1), audio(bclk) mpp13 13 gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)
Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt +19 -19
@@ -27,15 +27,15 @@ mpp8 8 gpio, ge0(txd1), dev(ad10) mpp9 9 gpio, ge0(txd2), dev(ad11) mpp10 10 gpio, ge0(txd3), dev(ad12) mpp11 11 gpio, ge0(txctl), dev(ad13) -mpp12 12 gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14) -mpp13 13 gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15) -mpp14 14 gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1) -mpp15 15 gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1] -mpp16 16 gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq) +mpp12 12 gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq) +mpp13 13 gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq) +mpp14 14 gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1), pcie3(clkreq) +mpp15 15 gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi) +mpp16 16 gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1] mpp17 17 gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt) -mpp18 18 gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1] -mpp19 19 gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts) -mpp20 20 gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts) +mpp18 18 gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0) +mpp19 19 gpio, ge0(col), ptp(event_req), ge0(txerr), sata1(prsnt), ua0(cts) +mpp20 20 gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts) mpp21 21 gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs) mpp22 22 gpio, spi0(mosi), dev(ad0) mpp23 23 gpio, spi0(sck), dev(ad2)
@@ -58,23 +58,23 @@ mpp39 39 gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2) mpp40 40 gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6) mpp41 41 gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last) mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7) -mpp43 43 gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout) -mpp44 44 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout) -mpp45 45 gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout) -mpp46 46 gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout) -mpp47 47 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2] -mpp48 48 gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4) -mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5) -mpp50 50 gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd) +mpp43 43 gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), spi1(cs2), dev(clkout) +mpp44 44 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3] +mpp45 45 gpio, ref(clk_out0), pcie0(rstout) +mpp46 46 gpio, ref(clk_out1), pcie0(rstout) +mpp47 47 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2] +mpp48 48 gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4), pcie0(clkreq) +mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5), pcie1(clkreq) +mpp50 50 gpio, pcie0(rstout), tdm2c(drx), audio(extclk), sd0(cmd) mpp51 51 gpio, tdm2c(dtx), audio(sdo), m(decc_err) -mpp52 52 gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6) +mpp52 52 gpio, pcie0(rstout), tdm2c(intn), audio(sdi), sd0(d6) mpp53 53 gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7) -mpp54 54 gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3) +mpp54 54 gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3) mpp55 55 gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0) mpp56 56 gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi) mpp57 57 gpio, spi1(sck), sd0(clk) mpp58 58 gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1) -mpp59 59 gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2) +mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2) [1]: only available on 88F6820 and 88F6828 [2]: only available on 88F6828
Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt +13 -19
@@ -42,15 +42,15 @@ mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk) mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat) mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt) mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt) -mpp24 24 gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst) -mpp25 25 gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk) -mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd) +mpp24 24 gpio, lcd(hsync), sata1(prsnt), tdm(rst) +mpp25 25 gpio, lcd(vsync), sata0(prsnt), tdm(pclk) +mpp26 26 gpio, lcd(clk), tdm(fsync) mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig) mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq) -mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd) +mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk) mpp30 30 gpio, tdm(int1), sd0(clk) -mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd) -mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd) +mpp31 31 gpio, tdm(int2), sd0(cmd) +mpp32 32 gpio, tdm(int3), sd0(d0) mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat) mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt) mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt)
@@ -58,21 +58,18 @@ mpp36 36 gpio, spi(mosi) mpp37 37 gpio, spi(miso) mpp38 38 gpio, spi(sck) mpp39 39 gpio, spi(cs0) -mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd), - pcie(clkreq0) +mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0) mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), pcie(clkreq1) -mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer), - vdd(cpu0-pd) -mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout), - vdd(cpu2-3-pd){1} +mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer) +mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout) mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2), mem(bat) mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt) mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt) mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3), ref(clkout) -mpp48 48 gpio, tclk, dev(burst/last) +mpp48 48 gpio, dev(clkout), dev(burst/last) * Marvell Armada XP (mv78260 and mv78460 only)
@@ -84,9 +81,9 @@ mpp51 51 gpio, dev(ad16) mpp52 52 gpio, dev(ad17) mpp53 53 gpio, dev(ad18) mpp54 54 gpio, dev(ad19) -mpp55 55 gpio, dev(ad20), vdd(cpu0-pd) -mpp56 56 gpio, dev(ad21), vdd(cpu1-pd) -mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1} +mpp55 55 gpio, dev(ad20) +mpp56 56 gpio, dev(ad21) +mpp57 57 gpio, dev(ad22) mpp58 58 gpio, dev(ad23) mpp59 59 gpio, dev(ad24) mpp60 60 gpio, dev(ad25)
@@ -96,6 +93,3 @@ mpp63 63 gpio, dev(ad28) mpp64 64 gpio, dev(ad29) mpp65 65 gpio, dev(ad30) mpp66 66 gpio, dev(ad31) - -Notes: -* {1} vdd(cpu2-3-pd) only available on mv78460.
Documentation/devicetree/bindings/usb/atmel-usb.txt +3 -3
@@ -60,9 +60,9 @@ Atmel High-Speed USB device controller Required properties: - compatible: Should be one of the following - "at91sam9rl-udc" - "at91sam9g45-udc" - "sama5d3-udc" + "atmel,at91sam9rl-udc" + "atmel,at91sam9g45-udc" + "atmel,sama5d3-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - ep childnode: To specify the number of endpoints and their properties.
Documentation/kernel-parameters.txt +9 -1
@@ -1398,7 +1398,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. The list of supported hash algorithms is defined in crypto/hash_info.h. - ima_tcb [IMA] + ima_policy= [IMA] + The builtin measurement policy to load during IMA + setup. Specyfing "tcb" as the value, measures all + programs exec'd, files mmap'd for exec, and all files + opened with the read mode bit set by either the + effective uid (euid=0) or uid=0. + Format: "tcb" + + ima_tcb [IMA] Deprecated. Use ima_policy= instead. Load a policy which meets the needs of the Trusted Computing Base. This means IMA will measure all programs exec'd, files mmap'd for exec, and all files
Makefile +1 -1
@@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 1 -SUBLEVEL = 3 +SUBLEVEL = 4 EXTRAVERSION = NAME = Series 4800
arch/arm/boot/dts/at91-sama5d4ek.dts +2 -2
@@ -108,8 +108,8 @@ mmc0: mmc@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; - slot@1 { - reg = <1>; + slot@0 { + reg = <0>; bus-width = <4>; cd-gpios = <&pioE 5 0>; };
arch/arm/boot/dts/at91sam9g45.dtsi +1 -1
@@ -1148,7 +1148,7 @@ usb2: gadget@fff78000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,at91sam9g45-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
arch/arm/boot/dts/at91sam9x5.dtsi +1 -1
@@ -1062,7 +1062,7 @@ usb2: gadget@f803c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,at91sam9g45-udc"; reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
arch/arm/boot/dts/imx23.dtsi +1 -0
@@ -435,6 +435,7 @@ interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; clocks = <&clks 26>; + #io-channel-cells = <1>; }; spdif@80054000 {
arch/arm/boot/dts/sama5d3.dtsi +1 -1
@@ -1321,7 +1321,7 @@ usb0: gadget@00500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
arch/arm/boot/dts/sama5d4.dtsi +11 -11
@@ -123,7 +123,7 @@ usb0: gadget@00400000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,sama5d3-udc"; reg = <0x00400000 0x100000 0xfc02c000 0x4000>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1125,10 +1125,10 @@ compatible = "atmel,at91sam9g46-aes"; reg = <0xfc044000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(41)>, - <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(40)>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(41))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk";
@@ -1139,10 +1139,10 @@ compatible = "atmel,at91sam9g46-tdes"; reg = <0xfc04c000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(42)>, - <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(43)>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(42))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(43))>; dma-names = "tx", "rx"; clocks = <&tdes_clk>; clock-names = "tdes_clk";
@@ -1153,8 +1153,8 @@ compatible = "atmel,at91sam9g46-sha"; reg = <0xfc050000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(44)>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(44))>; dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk";
arch/arm/kernel/smp.c +2 -2
@@ -576,7 +576,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)struct pt_regs *old_regs =set_irq_regs (regs);if ((unsigned )ipinr <NR_IPI ) { -trace_ipi_entry (ipi_types[ipinr]); +trace_ipi_entry_rcuidle (ipi_types[ipinr]);__inc_irq_stat (cpu, ipi_irqs[ipinr]); }
@@ -635,7 +635,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs) }if ((unsigned )ipinr <NR_IPI ) -trace_ipi_exit (ipi_types[ipinr]); +trace_ipi_exit_rcuidle (ipi_types[ipinr]);set_irq_regs (old_regs); }
arch/arm/mach-dove/include/mach/irqs.h +59 -59
132 lines not on this page · raw message
arch/arm/mach-dove/irq.c +4 -4
@@ -126,14 +126,14 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) stat =readl_relaxed (dove_irq_base +IRQ_CAUSE_LOW_OFF ); stat &=readl_relaxed (dove_irq_base +IRQ_MASK_LOW_OFF );if (stat) { -unsigned int hwirq =__fls (stat); +unsigned int hwirq =1 +__fls (stat);handle_IRQ (hwirq, regs);return ; } stat =readl_relaxed (dove_irq_base +IRQ_CAUSE_HIGH_OFF ); stat &=readl_relaxed (dove_irq_base +IRQ_MASK_HIGH_OFF );if (stat) { -unsigned int hwirq =32 +__fls (stat); +unsigned int hwirq =33 +__fls (stat);handle_IRQ (hwirq, regs);return ; }
@@ -144,8 +144,8 @@ void __init dove_init_irq(void) {int i; -orion_irq_init (0 ,IRQ_VIRT_BASE +IRQ_MASK_LOW_OFF ); -orion_irq_init (32 ,IRQ_VIRT_BASE +IRQ_MASK_HIGH_OFF ); +orion_irq_init (1 ,IRQ_VIRT_BASE +IRQ_MASK_LOW_OFF ); +orion_irq_init (33 ,IRQ_VIRT_BASE +IRQ_MASK_HIGH_OFF );#ifdef CONFIG_MULTI_IRQ_HANDLER set_handle_irq (dove_legacy_handle_irq);
arch/arm/vdso/vdsomunge.c +33 -23
132 lines not on this page · raw message
arch/arm64/kernel/smp.c +2 -2
@@ -569,7 +569,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)struct pt_regs *old_regs =set_irq_regs (regs);if ((unsigned )ipinr <NR_IPI ) { -trace_ipi_entry (ipi_types[ipinr]); +trace_ipi_entry_rcuidle (ipi_types[ipinr]);__inc_irq_stat (cpu, ipi_irqs[ipinr]); }
@@ -612,7 +612,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs) }if ((unsigned )ipinr <NR_IPI ) -trace_ipi_exit (ipi_types[ipinr]); +trace_ipi_exit_rcuidle (ipi_types[ipinr]);set_irq_regs (old_regs); }
arch/arm64/mm/hugetlbpage.c +2 -2
@@ -40,13 +40,13 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)int pmd_huge (pmd_t pmd) { -return !(pmd_val (pmd) &PMD_TABLE_BIT ); +return pmd_val (pmd) && !(pmd_val (pmd) &PMD_TABLE_BIT ); }int pud_huge (pud_t pud) {#ifndef __PAGETABLE_PMD_FOLDED -return !(pud_val (pud) &PUD_TABLE_BIT ); +return pud_val (pud) && !(pud_val (pud) &PUD_TABLE_BIT );#else return 0 ;#endif
arch/arm64/net/bpf_jit.h +4 -0
@@ -110,6 +110,10 @@/* Rd = Rn >> shift; signed */ #define A64_ASR (sf, Rd, Rn, shift) A64_SBFM(sf, Rd, Rn, shift, (sf) ? 63 : 31) +/* Zero extend */ +#define A64_UXTH (sf, Rd, Rn) A64_UBFM(sf, Rd, Rn, 0, 15) +#define A64_UXTW (sf, Rd, Rn) A64_UBFM(sf, Rd, Rn, 0, 31) +/* Move wide (immediate) */ #define A64_MOVEW (sf, Rd, imm16, shift, type) \ aarch64_insn_gen_movewide(Rd, imm16, shift, \
arch/arm64/net/bpf_jit_comp.c +24 -5
@@ -113,9 +113,9 @@ static inline void emit_a64_mov_i(const int is64, const int reg,static inline int bpf2a64_offset (int bpf_to,int bpf_from,const struct jit_ctx *ctx) { -int to = ctx->offset[bpf_to +1 ]; +int to = ctx->offset[bpf_to];/* -1 to account for the Branch instruction */ -int from = ctx->offset[bpf_from +1 ] -1 ; +int from = ctx->offset[bpf_from] -1 ;return to - from; }
@@ -289,23 +289,41 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)case BPF_ALU |BPF_END |BPF_FROM_BE :#ifdef CONFIG_CPU_BIG_ENDIAN if (BPF_SRC (code) ==BPF_FROM_BE ) -break ; + goto emit_bswap_uxt;#else /* !CONFIG_CPU_BIG_ENDIAN */ if (BPF_SRC (code) ==BPF_FROM_LE ) -break ; + goto emit_bswap_uxt;#endif switch (imm) {case 16 :emit (A64_REV16 (is64, dst, dst), ctx); +/* zero-extend 16 bits into 64 bits */ +emit (A64_UXTH (is64, dst, dst), ctx);break ;case 32 :emit (A64_REV32 (is64, dst, dst), ctx); +/* upper 32 bits already cleared */ break ;case 64 :emit (A64_REV64 (dst, dst), ctx);break ; }break ; +emit_bswap_uxt: +switch (imm) { +case 16 : +/* zero-extend 16 bits into 64 bits */ +emit (A64_UXTH (is64, dst, dst), ctx); +break ; +case 32 : +/* zero-extend 32 bits into 64 bits */ +emit (A64_UXTW (is64, dst, dst), ctx); +break ; +case 64 : +/* nop */ +break ; + } +break ;/* dst = imm */ case BPF_ALU |BPF_MOV |BPF_K :case BPF_ALU64 |BPF_MOV |BPF_K :
@@ -640,10 +658,11 @@ static int build_body(struct jit_ctx *ctx)const struct bpf_insn *insn = &prog->insnsi[i];int ret; + ret =build_insn (insn, ctx); +if (ctx->image ==NULL ) ctx->offset[i] = ctx->idx; - ret =build_insn (insn, ctx);if (ret >0 ) { i++;continue ;
arch/m68k/Kconfig.cpu +19 -22
80 lines not on this page · raw message
arch/m68k/include/asm/coldfire.h +1 -1
@@ -19,7 +19,7 @@* in any case new boards come along from time to time that have yet * another different clocking frequency. */ -#ifdef CONFIG_CLOCK_SET +#ifdef CONFIG_CLOCK_FREQ #define MCF_CLK CONFIG_CLOCK_FREQ#else #error "Don't know what your ColdFire CPU clock frequency is??"
arch/openrisc/Kconfig +1 -3
@@ -17,6 +17,7 @@ config OPENRISC select GENERIC_IRQ_SHOW select GENERIC_IOMAP select GENERIC_CPU_DEVICES + select HAVE_UID16 select GENERIC_ATOMIC64 select GENERIC_CLOCKEVENTS select GENERIC_STRNCPY_FROM_USER
@@ -31,9 +32,6 @@ config MMU config HAVE_DMA_ATTRS def_bool y -config UID16 - def_bool y - config RWSEM_GENERIC_SPINLOCK def_bool y
arch/x86/mm/mmap.c +7 -0
@@ -126,3 +126,10 @@ void arch_pick_mmap_layout(struct mm_struct *mm) mm->get_unmapped_area = arch_get_unmapped_area_topdown; } } + +const char *arch_vma_name (struct vm_area_struct *vma) +{ +if (vma->vm_flags &VM_MPX ) +return "[mpx]" ; +return NULL ; +}
arch/x86/mm/mpx.c +1 -19
@@ -18,26 +18,9 @@#include <asm/processor.h> #include <asm/fpu-internal.h> -static const char *mpx_mapping_name (struct vm_area_struct *vma) -{ -return "[mpx]" ; -} - -static struct vm_operations_struct mpx_vma_ops = { - .name = mpx_mapping_name, -}; - -static int is_mpx_vma (struct vm_area_struct *vma) -{ -return (vma->vm_ops == &mpx_vma_ops); -} -/* * This is really a simplified "vm_mmap". it only handles MPX * bounds tables (the bounds directory is user-allocated). -* -* Later on, we use the vma->vm_ops to uniquely identify these -* VMAs. */ static unsigned long mpx_mmap (unsigned long len) {
@@ -83,7 +66,6 @@ static unsigned long mpx_mmap(unsigned long len) ret = -ENOMEM ; goto out; } - vma->vm_ops = &mpx_vma_ops;if (vm_flags &VM_LOCKED ) {up_write (&mm->mmap_sem);
@@ -661,7 +643,7 @@ static int zap_bt_entries(struct mm_struct *mm,* so stop immediately and return an error. This * probably results in a SIGSEGV. */ -if (!is_mpx_vma (vma)) +if (!(vma->vm_flags &VM_MPX ))return -EINVAL ; len =min (vma->vm_end, end) - addr;
block/bio.c +12 -3
@@ -1814,8 +1814,9 @@ EXPORT_SYMBOL(bio_endio_nodec);* Allocates and returns a new bio which represents @sectors from the start of * @bio, and updates @bio to represent the remaining sectors. * -* The newly allocated bio will point to @bio's bi_io_vec; it is the caller's -* responsibility to ensure that @bio is not freed before the split. +* Unless this is a discard request the newly allocated bio will point +* to @bio's bi_io_vec; it is the caller's responsibility to ensure that +* @bio is not freed before the split. */ struct bio *bio_split (struct bio *bio,int sectors,gfp_t gfp,struct bio_set *bs)
@@ -1825,7 +1826,15 @@ struct bio *bio_split(struct bio *bio, int sectors,BUG_ON (sectors <=0 );BUG_ON (sectors >=bio_sectors (bio)); - split =bio_clone_fast (bio, gfp, bs); +/* +* Discards need a mutable bio_vec to accommodate the payload +* required by the DSM TRIM and UNMAP commands. +*/ +if (bio->bi_rw &REQ_DISCARD ) + split =bio_clone_bioset (bio, gfp, bs); +else + split =bio_clone_fast (bio, gfp, bs); +if (!split)return NULL ;
crypto/asymmetric_keys/asymmetric_keys.h +3 -0
@@ -11,6 +11,9 @@extern struct asymmetric_key_id *asymmetric_key_hex_to_key_id (const char *id); +extern int __asymmetric_key_hex_to_key_id (const char *id, +struct asymmetric_key_id *match_id, +size_t hexlen);static inline const struct asymmetric_key_ids *asymmetric_key_ids (const struct key *key) {
crypto/asymmetric_keys/asymmetric_type.c +14 -6
@@ -104,6 +104,15 @@ static bool asymmetric_match_key_ids(return false; } +/* helper function can be called directly with pre-allocated memory */ +inline int __asymmetric_key_hex_to_key_id (const char *id, +struct asymmetric_key_id *match_id, +size_t hexlen) +{ + match_id->len = hexlen; +return hex2bin (match_id->data, id, hexlen); +} +/** * asymmetric_key_hex_to_key_id - Convert a hex string into a key ID. * @id: The ID as a hex string.
@@ -111,21 +120,20 @@ static bool asymmetric_match_key_ids(struct asymmetric_key_id *asymmetric_key_hex_to_key_id (const char *id) {struct asymmetric_key_id *match_id; -size_t hexlen; +size_t asciihexlen;int ret;if (!*id)return ERR_PTR (-EINVAL ); - hexlen =strlen (id); -if (hexlen &1 ) + asciihexlen =strlen (id); +if (asciihexlen &1 )return ERR_PTR (-EINVAL ); - match_id =kmalloc (sizeof (struct asymmetric_key_id ) + hexlen /2 , + match_id =kmalloc (sizeof (struct asymmetric_key_id ) + asciihexlen /2 ,GFP_KERNEL );if (!match_id)return ERR_PTR (-ENOMEM ); - match_id->len = hexlen /2 ; - ret =hex2bin (match_id->data, id, hexlen /2 ); + ret =__asymmetric_key_hex_to_key_id (id, match_id, asciihexlen /2 );if (ret <0 ) {kfree (match_id);return ERR_PTR (-EINVAL );
crypto/asymmetric_keys/x509_public_key.c +18 -5
@@ -28,17 +28,30 @@ static bool use_builtin_keys;static struct asymmetric_key_id *ca_keyid;#ifndef MODULE +static struct { +struct asymmetric_key_id id; +unsigned char data[10 ]; +} cakey; +static int __init ca_keys_setup (char *str) {if (!str)/* default system keyring */ return 1 ;if (strncmp (str,"id:" ,3 ) ==0 ) { -struct asymmetric_key_id *p; - p =asymmetric_key_hex_to_key_id (str +3 ); -if (p ==ERR_PTR (-EINVAL )) -pr_err ("Unparsable hex string in ca_keys\n" ); -else if (!IS_ERR (p)) +struct asymmetric_key_id *p = &cakey.id; +size_t hexlen = (strlen (str) -3 ) /2 ; +int ret; + +if (hexlen ==0 || hexlen >sizeof (cakey.data)) { +pr_err ("Missing or invalid ca_keys id\n" ); +return 1 ; + } + + ret =__asymmetric_key_hex_to_key_id (str +3 , p, hexlen); +if (ret <0 ) +pr_err ("Unparsable ca_keys id hex string\n" ); +else ca_keyid = p;/* owner key 'id:xxxxxx' */ }else if (strcmp (str,"builtin" ) ==0 ) { use_builtin_keys = true;
drivers/acpi/acpi_lpss.c +5 -2
@@ -352,13 +352,16 @@ static int acpi_lpss_create_device(struct acpi_device *adev, pdata->mmio_size =resource_size (rentry->res); pdata->mmio_base =ioremap (rentry->res->start, pdata->mmio_size); -if (!pdata->mmio_base) - goto err_out;break ; }acpi_dev_free_resource_list (&resource_list); +if (!pdata->mmio_base) { + ret = -ENOMEM ; + goto err_out; + } + pdata->dev_desc = dev_desc;if (dev_desc->setup)
drivers/acpi/acpica/aclocal.h +1 -0
@@ -213,6 +213,7 @@ struct acpi_table_list {#define ACPI_TABLE_INDEX_DSDT (0)#define ACPI_TABLE_INDEX_FACS (1) +#define ACPI_TABLE_INDEX_X_FACS (2)struct acpi_find_context {char *search_for;
drivers/acpi/acpica/tbfadt.c +13 -8
@@ -350,9 +350,18 @@ void acpi_tb_parse_fadt(u32 table_index)/* If Hardware Reduced flag is set, there is no FACS */ if (!acpi_gbl_reduced_hardware) { -acpi_tb_install_fixed_table ((acpi_physical_address ) - acpi_gbl_FADT.Xfacs,ACPI_SIG_FACS , -ACPI_TABLE_INDEX_FACS ); +if (acpi_gbl_FADT.facs) { +acpi_tb_install_fixed_table ((acpi_physical_address ) + acpi_gbl_FADT.facs, +ACPI_SIG_FACS , +ACPI_TABLE_INDEX_FACS ); + } +if (acpi_gbl_FADT.Xfacs) { +acpi_tb_install_fixed_table ((acpi_physical_address ) + acpi_gbl_FADT.Xfacs, +ACPI_SIG_FACS , +ACPI_TABLE_INDEX_X_FACS ); + } } }
@@ -491,13 +500,9 @@ static void acpi_tb_convert_fadt(void) acpi_gbl_FADT.header.length =sizeof (struct acpi_table_fadt );/* -* Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. +* Expand the 32-bit DSDT addresses to 64-bit as necessary. * Later ACPICA code will always use the X 64-bit field. */ - acpi_gbl_FADT.Xfacs =acpi_tb_select_address ("FACS" , - acpi_gbl_FADT.facs, - acpi_gbl_FADT.Xfacs); - acpi_gbl_FADT.Xdsdt =acpi_tb_select_address ("DSDT" , acpi_gbl_FADT.dsdt, acpi_gbl_FADT.Xdsdt);
drivers/acpi/acpica/tbutils.c +23 -11
@@ -68,7 +68,8 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size);acpi_status acpi_tb_initialize_facs (void ) { -acpi_status status; +struct acpi_table_facs *facs32; +struct acpi_table_facs *facs64;/* If Hardware Reduced flag is set, there is no FACS */
@@ -77,11 +78,22 @@ acpi_status acpi_tb_initialize_facs(void)return (AE_OK ); } - status =acpi_get_table_by_index (ACPI_TABLE_INDEX_FACS , - ACPI_CAST_INDIRECT_PTR(struct - acpi_table_header, - &acpi_gbl_FACS)); -return (status); + (void )acpi_get_table_by_index (ACPI_TABLE_INDEX_FACS , + ACPI_CAST_INDIRECT_PTR(struct + acpi_table_header, + &facs32)); + (void )acpi_get_table_by_index (ACPI_TABLE_INDEX_X_FACS , + ACPI_CAST_INDIRECT_PTR(struct + acpi_table_header, + &facs64)); + +if (acpi_gbl_use32_bit_facs_addresses) { + acpi_gbl_FACS = facs32 ? facs32 : facs64; + }else { + acpi_gbl_FACS = facs64 ? facs64 : facs32; + } + +return (AE_OK ); }#endif /* !ACPI_REDUCED_HARDWARE */
@@ -101,7 +113,7 @@ acpi_status acpi_tb_initialize_facs(void)u8 acpi_tb_tables_loaded (void ) { -if (acpi_gbl_root_table_list.current_table_count >=3 ) { +if (acpi_gbl_root_table_list.current_table_count >=4 ) {return (TRUE); }
@@ -357,11 +369,11 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address) table_entry =ACPI_ADD_PTR (u8, table,sizeof (struct acpi_table_header ));/* -* First two entries in the table array are reserved for the DSDT -* and FACS, which are not actually present in the RSDT/XSDT - they -* come from the FADT +* First three entries in the table array are reserved for the DSDT +* and 32bit/64bit FACS, which are not actually present in the +* RSDT/XSDT - they come from the FADT */ - acpi_gbl_root_table_list.current_table_count =2 ; + acpi_gbl_root_table_list.current_table_count =3 ;/* Initialize the root table array from the RSDT/XSDT */
drivers/acpi/acpica/tbxfload.c +2 -1
@@ -166,7 +166,8 @@ static acpi_status acpi_tb_load_namespace(void) (void )acpi_ut_acquire_mutex (ACPI_MTX_TABLES );for (i =0 ; i < acpi_gbl_root_table_list.current_table_count; ++i) { - if ((!ACPI_COMPARE_NAME + if (!acpi_gbl_root_table_list.tables[i].address || + (!ACPI_COMPARE_NAME (&(acpi_gbl_root_table_list.tables[i].signature), ACPI_SIG_SSDT) &&
drivers/acpi/acpica/utxfinit.c +6 -4
@@ -179,10 +179,12 @@ acpi_status __init acpi_enable_subsystem(u32 flags)* Obtain a permanent mapping for the FACS. This is required for the * Global Lock and the Firmware Waking Vector */ - status =acpi_tb_initialize_facs (); -if (ACPI_FAILURE (status)) { -ACPI_WARNING ((AE_INFO ,"Could not map the FACS table" )); -return_ACPI_STATUS (status); +if (!(flags &ACPI_NO_FACS_INIT )) { + status =acpi_tb_initialize_facs (); +if (ACPI_FAILURE (status)) { +ACPI_WARNING ((AE_INFO ,"Could not map the FACS table" )); +return_ACPI_STATUS (status); + } }#endif /* !ACPI_REDUCED_HARDWARE */
drivers/acpi/osl.c +9 -3
@@ -175,10 +175,14 @@ static void __init acpi_request_region (struct acpi_generic_address *gas,if (!addr || !length)return ; -acpi_reserve_region (addr, length, gas->space_id,0 , desc); +/* Resources are never freed */ +if (gas->space_id ==ACPI_ADR_SPACE_SYSTEM_IO ) +request_region (addr, length, desc); +else if (gas->space_id ==ACPI_ADR_SPACE_SYSTEM_MEMORY ) +request_mem_region (addr, length, desc); } -static void __init acpi_reserve_resources (void ) +static int __init acpi_reserve_resources (void ) {acpi_request_region (&acpi_gbl_FADT.xpm1a_event_block, acpi_gbl_FADT.pm1_event_length,"ACPI PM1a_EVT_BLK" );
@@ -207,7 +211,10 @@ static void __init acpi_reserve_resources(void)if (!(acpi_gbl_FADT.gpe1_block_length &0x1 ))acpi_request_region (&acpi_gbl_FADT.xgpe1_block, acpi_gbl_FADT.gpe1_block_length,"ACPI GPE1_BLK" ); + +return 0 ; } +fs_initcall_sync (acpi_reserve_resources);void acpi_os_printf (const char *fmt, ...) {
@@ -1838,7 +1845,6 @@ acpi_status __init acpi_os_initialize(void)acpi_status __init acpi_os_initialize1 (void ) { -acpi_reserve_resources (); kacpid_wq =alloc_workqueue ("kacpid" ,0 ,1 ); kacpi_notify_wq =alloc_workqueue ("kacpi_notify" ,0 ,1 ); kacpi_hotplug_wq =alloc_ordered_workqueue ("kacpi_hotplug" ,0 );
drivers/acpi/resource.c +15 -169
219 lines not on this page · raw message
drivers/ata/libata-core.c +19 -4
@@ -2478,6 +2478,10 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); +if (dev->horkage &ATA_HORKAGE_MAX_SEC_1024 ) + dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024, + dev->max_sectors); +if (dev->horkage &ATA_HORKAGE_MAX_SEC_LBA48 ) dev->max_sectors =ATA_MAX_SECTORS_LBA48 ;
@@ -4146,6 +4150,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, +/* +* Causes silent data corruption with higher max sects. +* http://lkml.kernel.org/g/[email protected] +*/ + { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 }, +/* Devices we expect to fail diagnostics */ /* Devices where NCQ should be avoided */
@@ -4174,9 +4184,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { {"ST3320[68]13AS" ,"SD1[5-9]" ,ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, -/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */ +/* drives which fail FPDMA_AA activation (some may freeze afterwards) */ { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + { "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA },/* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */
@@ -4225,11 +4236,11 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },/* devices that don't properly handle queued TRIM commands */ - { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, - { "Micron_M5[15]0*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | + { "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4238,6 +4249,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { {"Samsung SSD 8*" ,NULL ,ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, + /* devices that don't properly handle TRIM commands */ + { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, +/* * As defined, the DRAT (Deterministic Read After Trim) and RZAT * (Return Zero After Trim) flags in the ATA Command Set are
@@ -4501,7 +4515,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)else /* In the ancient relic department - skip all of this */ return 0 ; - err_mask =ata_exec_internal (dev, &tf,NULL ,DMA_NONE ,NULL ,0 ,0 ); +/* On some disks, this command causes spin-up, so we need longer timeout */ + err_mask =ata_exec_internal (dev, &tf,NULL ,DMA_NONE ,NULL ,0 ,15000 );DPRINTK ("EXIT, err_mask=%x\n" , err_mask);return err_mask;
drivers/ata/libata-eh.c +12 -1
@@ -1507,16 +1507,21 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log, {struct ata_taskfile tf;unsigned int err_mask; +bool dma = false;DPRINTK ("read log page - log 0x%x, page 0x%x\n" , log, page); +retry:ata_tf_init (dev, &tf); -if (dev->dma_mode &&ata_id_has_read_log_dma_ext (dev->id)) { +if (dev->dma_mode &&ata_id_has_read_log_dma_ext (dev->id) && + !(dev->horkage &ATA_HORKAGE_NO_NCQ_LOG )) { tf.command =ATA_CMD_READ_LOG_DMA_EXT ; tf.protocol =ATA_PROT_DMA ; + dma = true; }else { tf.command =ATA_CMD_READ_LOG_EXT ; tf.protocol =ATA_PROT_PIO ; + dma = false; } tf.lbal = log; tf.lbam = page;
@@ -1527,6 +1532,12 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log, err_mask =ata_exec_internal (dev, &tf,NULL ,DMA_FROM_DEVICE , buf, sectors *ATA_SECT_SIZE ,0 ); +if (err_mask && dma) { + dev->horkage |=ATA_HORKAGE_NO_NCQ_LOG ; +ata_dev_warn (dev,"READ LOG DMA EXT failed, trying unqueued\n" ); + goto retry; + } +DPRINTK ("EXIT, err_mask=%x\n" , err_mask);return err_mask; }
drivers/ata/libata-scsi.c +2 -1
@@ -2568,7 +2568,8 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[14 ] = (lowest_aligned >>8 ) &0x3f ; rbuf[15 ] = lowest_aligned; -if (ata_id_has_trim (args->id)) { +if (ata_id_has_trim (args->id) && + !(dev->horkage &ATA_HORKAGE_NOTRIM )) { rbuf[14 ] |=0x80 ;/* LBPME */ if (ata_id_has_zero_after_trim(args->id) &&
drivers/ata/libata-transport.c +24 -0
@@ -560,6 +560,29 @@ show_ata_dev_gscr(struct device *dev, static DEVICE_ATTR(gscr, S_IRUGO, show_ata_dev_gscr, NULL); +static ssize_t +show_ata_dev_trim (struct device *dev, +struct device_attribute *attr,char *buf) +{ +struct ata_device *ata_dev =transport_class_to_dev (dev); +unsigned char *mode; + +if (!ata_id_has_trim (ata_dev->id)) + mode ="unsupported" ; +else if (ata_dev->horkage &ATA_HORKAGE_NOTRIM ) + mode ="forced_unsupported" ; +else if (ata_dev->horkage &ATA_HORKAGE_NO_NCQ_TRIM ) + mode ="forced_unqueued" ; +else if (ata_fpdma_dsm_supported (ata_dev)) + mode ="queued" ; +else + mode ="unqueued" ; + +return snprintf (buf,20 ,"%s\n" , mode); +} + +static DEVICE_ATTR(trim, S_IRUGO, show_ata_dev_trim, NULL); + static DECLARE_TRANSPORT_CLASS(ata_dev_class, "ata_device", NULL, NULL, NULL);
@@ -733,6 +756,7 @@ struct scsi_transport_template *ata_attach_transport(void)SETUP_DEV_ATTRIBUTE (ering);SETUP_DEV_ATTRIBUTE (id);SETUP_DEV_ATTRIBUTE (gscr); +SETUP_DEV_ATTRIBUTE (trim);BUG_ON (count >ATA_DEV_ATTRS ); i->dev_attrs[count] =NULL ;
drivers/base/firmware_class.c +13 -3
@@ -544,10 +544,8 @@ static void fw_dev_release(struct device *dev)kfree (fw_priv); } -static int firmware_uevent (struct device *dev,struct kobj_uevent_env *env) +static int do_firmware_uevent (struct firmware_priv *fw_priv,struct kobj_uevent_env *env) { -struct firmware_priv *fw_priv =to_firmware_priv (dev); -if (add_uevent_var (env,"FIRMWARE=%s" , fw_priv->buf->fw_id))return -ENOMEM ;if (add_uevent_var (env,"TIMEOUT=%i" , loading_timeout))
@@ -558,6 +556,18 @@ static int firmware_uevent(struct device *dev, struct kobj_uevent_env *env)return 0 ; } +static int firmware_uevent (struct device *dev,struct kobj_uevent_env *env) +{ +struct firmware_priv *fw_priv =to_firmware_priv (dev); +int err =0 ; + +mutex_lock (&fw_lock); +if (fw_priv->buf) + err =do_firmware_uevent (fw_priv, env); +mutex_unlock (&fw_lock); +return err; +} +static struct class firmware_class = { .name ="firmware" , .class_attrs = firmware_class_attrs,
drivers/base/power/clock_ops.c +1 -1
@@ -93,7 +93,7 @@ static int __pm_clk_add(struct device *dev, const char *con_id,return -ENOMEM ; } }else { -if (IS_ERR (ce->clk) || !__clk_get (clk)) { +if (IS_ERR (clk) || !__clk_get (clk)) {kfree (ce);return -ENOENT ; }
drivers/block/loop.c +14 -16
@@ -86,8 +86,6 @@ static DEFINE_MUTEX(loop_index_mutex);static int max_part;static int part_shift; -static struct workqueue_struct *loop_wq; - static int transfer_xor(struct loop_device *lo, int cmd, struct page *raw_page, unsigned raw_off, struct page *loop_page, unsigned loop_off,
@@ -725,6 +723,12 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, size =get_loop_size (lo, file);if ((loff_t )(sector_t )size != size) goto out_putf; + error = -ENOMEM ; + lo->wq =alloc_workqueue ("kloopd%d" , +WQ_MEM_RECLAIM |WQ_HIGHPRI |WQ_UNBOUND ,16 , + lo->lo_number); +if (!lo->wq) + goto out_putf; error =0 ;
@@ -872,6 +876,8 @@ static int loop_clr_fd(struct loop_device *lo) lo->lo_flags =0 ;if (!part_shift) lo->lo_disk->flags |=GENHD_FL_NO_PART_SCAN ; +destroy_workqueue (lo->wq); + lo->wq =NULL ;mutex_unlock (&lo->lo_ctl_mutex);/* * Need not hold lo_ctl_mutex to fput backing file.
@@ -1425,9 +1431,13 @@ static int loop_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd) {struct loop_cmd *cmd =blk_mq_rq_to_pdu (bd->rq); +struct loop_device *lo = cmd->rq->q->queuedata;blk_mq_start_request (bd->rq); +if (lo->lo_state != Lo_bound) +return -EIO ; +if (cmd->rq->cmd_flags &REQ_WRITE ) {struct loop_device *lo = cmd->rq->q->queuedata;bool need_sched = true;
@@ -1441,9 +1451,9 @@ static int loop_queue_rq(struct blk_mq_hw_ctx *hctx,spin_unlock_irq (&lo->lo_lock);if (need_sched) -queue_work (loop_wq, &lo->write_work); +queue_work (lo->wq, &lo->write_work); }else { -queue_work (loop_wq, &cmd->read_work); +queue_work (lo->wq, &cmd->read_work); }return BLK_MQ_RQ_QUEUE_OK ;
@@ -1455,9 +1465,6 @@ static void loop_handle_cmd(struct loop_cmd *cmd)struct loop_device *lo = cmd->rq->q->queuedata;int ret = -EIO ; -if (lo->lo_state != Lo_bound) - goto failed; -if (write && (lo->lo_flags &LO_FLAGS_READ_ONLY )) goto failed;
@@ -1806,13 +1813,6 @@ static int __init loop_init(void) goto misc_out; } - loop_wq =alloc_workqueue ("kloopd" , -WQ_MEM_RECLAIM |WQ_HIGHPRI |WQ_UNBOUND ,0 ); -if (!loop_wq) { - err = -ENOMEM ; - goto misc_out; - } -blk_register_region (MKDEV (LOOP_MAJOR ,0 ), range,THIS_MODULE , loop_probe,NULL ,NULL );
@@ -1850,8 +1850,6 @@ static void __exit loop_exit(void)blk_unregister_region (MKDEV (LOOP_MAJOR ,0 ), range);unregister_blkdev (LOOP_MAJOR ,"loop" ); -destroy_workqueue (loop_wq); -misc_deregister (&loop_misc); }
drivers/block/loop.h +1 -0
@@ -54,6 +54,7 @@ struct loop_device {gfp_t old_gfp_mask;spinlock_t lo_lock; +struct workqueue_struct *wq;struct list_head write_cmd_head;struct work_struct write_work;bool write_started;
drivers/block/rbd.c +2 -2
@@ -2001,11 +2001,11 @@ static struct rbd_obj_request *rbd_obj_request_create(const char *object_name,rbd_assert (obj_request_type_valid (type)); size =strlen (object_name) +1 ; - name =kmalloc (size,GFP_KERNEL ); + name =kmalloc (size,GFP_NOIO );if (!name)return NULL ; - obj_request =kmem_cache_zalloc (rbd_obj_request_cache,GFP_KERNEL ); + obj_request =kmem_cache_zalloc (rbd_obj_request_cache,GFP_NOIO );if (!obj_request) {kfree (name);return NULL ;
drivers/bluetooth/btbcm.c +5 -6
@@ -378,12 +378,11 @@ int btbcm_setup_apple(struct hci_dev *hdev)/* Read Verbose Config Version Info */ skb =btbcm_read_verbose_config (hdev); -if (IS_ERR (skb)) -return PTR_ERR (skb); - -BT_INFO ("%s: BCM: chip id %u build %4.4u" , hdev->name, skb->data[1 ], -get_unaligned_le16 (skb->data +5 )); -kfree_skb (skb); +if (!IS_ERR (skb)) { +BT_INFO ("%s: BCM: chip id %u build %4.4u" , hdev->name, skb->data[1 ], +get_unaligned_le16 (skb->data +5 )); +kfree_skb (skb); + }set_bit (HCI_QUIRK_STRICT_DUPLICATE_FILTER , &hdev->quirks);
drivers/bluetooth/btusb.c +25 -13
@@ -268,7 +268,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */ - { USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE }, + { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE }, /* Digianswer devices */ { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
@@ -1993,6 +1993,8 @@ static int btusb_setup_intel(struct hci_dev *hdev) } fw_ptr = fw->data; +kfree_skb (skb); +/* This Intel specific command enables the manufacturer mode of the * controller. *
@@ -2334,6 +2336,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)struct intel_boot_params *params;const struct firmware *fw;const u8 *fw_ptr; +u32 frag_len;char fwname[64 ];ktime_t calltime, delta, rettime;unsigned long long duration;
@@ -2540,24 +2543,33 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) } fw_ptr = fw->data +644 ; + frag_len =0 ;while (fw_ptr - fw->data < fw->size) { -struct hci_command_hdr *cmd = (void *)fw_ptr; -u8 cmd_len; +struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len); - cmd_len =sizeof (*cmd) + cmd->plen; + frag_len +=sizeof (*cmd) + cmd->plen; -/* Send each command from the firmware data buffer as -* a single Data fragment. +/* The paramter length of the secure send command requires +* a 4 byte alignment. It happens so that the firmware file +* contains proper Intel_NOP commands to align the fragments +* as needed. +* +* Send set of commands with 4 byte alignment from the +* firmware data buffer as a single Data fragement. */ - err =btusb_intel_secure_send (hdev,0x01 , cmd_len, fw_ptr); -if (err <0 ) { -BT_ERR ("%s: Failed to send firmware data (%d)" , - hdev->name, err); - goto done; - } +if (!(frag_len %4 )) { + err =btusb_intel_secure_send (hdev,0x01 , frag_len, + fw_ptr); +if (err <0 ) { +BT_ERR ("%s: Failed to send firmware data (%d)" , + hdev->name, err); + goto done; + } - fw_ptr += cmd_len; + fw_ptr += frag_len; + frag_len =0 ; + } }set_bit (BTUSB_FIRMWARE_LOADED , &data->flags);
drivers/bus/arm-ccn.c +1 -1
@@ -212,7 +212,7 @@ static int arm_ccn_node_to_xp_port(int node)static void arm_ccn_pmu_config_set (u64 *config,u32 node_xp,u32 type,u32 port) { - *config &= ~((0xff <<0 ) | (0xff <<8 ) | (0xff <<24 )); + *config &= ~((0xff <<0 ) | (0xff <<8 ) | (0x3 <<24 )); *config |= (node_xp <<0 ) | (type <<8 ) | (port <<24 ); }
drivers/char/agp/intel-gtt.c +1 -1
@@ -581,7 +581,7 @@ static inline int needs_ilk_vtd_wa(void)/* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. */ -if ((gpu_devid ==PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB || +if ((gpu_devid ==PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG || gpu_devid ==PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG ) && intel_iommu_gfx_mapped)return 1 ;
drivers/char/tpm/tpm-chip.c +2 -1
@@ -129,8 +129,9 @@ struct tpm_chip *tpmm_chip_alloc(struct device *dev,device_initialize (&chip->dev); - chip->cdev.owner = chip->pdev->driver->owner;cdev_init (&chip->cdev, &tpm_fops); + chip->cdev.owner = chip->pdev->driver->owner; + chip->cdev.kobj.parent = &chip->dev.kobj;return chip; }
drivers/char/tpm/tpm_crb.c +10 -2
@@ -233,6 +233,14 @@ static int crb_acpi_add(struct acpi_device *device)return -ENODEV ; } +/* At least some versions of AMI BIOS have a bug that TPM2 table has +* zero address for the control area and therefore we must fail. +*/ +if (!buf->control_area_pa) { +dev_err (dev,"TPM2 ACPI table has a zero address for the control area\n" ); +return -EINVAL ; + } +if (buf->hdr.length <sizeof (struct acpi_tpm2 )) {dev_err (dev,"TPM2 ACPI table has wrong size" );return -EINVAL ;
@@ -267,7 +275,7 @@ static int crb_acpi_add(struct acpi_device *device)memcpy_fromio (&pa, &priv->cca->cmd_pa,8 ); pa =le64_to_cpu (pa); - priv->cmd =devm_ioremap_nocache (dev,le64_to_cpu (pa), + priv->cmd =devm_ioremap_nocache (dev, pa,ioread32 (&priv->cca->cmd_size));if (!priv->cmd) {dev_err (dev,"ioremap of the command buffer failed\n" );
@@ -276,7 +284,7 @@ static int crb_acpi_add(struct acpi_device *device)memcpy_fromio (&pa, &priv->cca->rsp_pa,8 ); pa =le64_to_cpu (pa); - priv->rsp =devm_ioremap_nocache (dev,le64_to_cpu (pa), + priv->rsp =devm_ioremap_nocache (dev, pa,ioread32 (&priv->cca->rsp_size));if (!priv->rsp) {dev_err (dev,"ioremap of the response buffer failed\n" );
drivers/char/tpm/tpm_ibmvtpm.c +3 -2
@@ -578,6 +578,9 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev, goto cleanup; } + ibmvtpm->dev = dev; + ibmvtpm->vdev = vio_dev; + crq_q = &ibmvtpm->crq_queue; crq_q->crq_addr = (struct ibmvtpm_crq *)get_zeroed_page (GFP_KERNEL );if (!crq_q->crq_addr) {
@@ -622,8 +625,6 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev, crq_q->index =0 ; - ibmvtpm->dev = dev; - ibmvtpm->vdev = vio_dev;TPM_VPRIV (chip) = (void *)ibmvtpm;spin_lock_init (&ibmvtpm->rtce_lock);
drivers/clk/clk.c +3 -2
@@ -230,11 +230,12 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)if (!c)return ; +/* This should be JSON format, i.e. elements separated with a comma */ seq_printf (s,"\"%s\": { " , c->name);seq_printf (s,"\"enable_count\": %d," , c->enable_count);seq_printf (s,"\"prepare_count\": %d," , c->prepare_count); -seq_printf (s,"\"rate\": %lu" ,clk_core_get_rate (c)); -seq_printf (s,"\"accuracy\": %lu" ,clk_core_get_accuracy (c)); +seq_printf (s,"\"rate\": %lu," ,clk_core_get_rate (c)); +seq_printf (s,"\"accuracy\": %lu," ,clk_core_get_accuracy (c));seq_printf (s,"\"phase\": %d" ,clk_core_get_phase (c)); }
drivers/clk/qcom/clk-rcg2.c +3 -6
@@ -530,19 +530,16 @@ static int clk_pixel_set_rate(struct clk_hw *hw, unsigned long rate,struct clk_rcg2 *rcg =to_clk_rcg2 (hw);struct freq_tbl f = *rcg->freq_tbl;const struct frac_entry *frac = frac_table_pixel; -unsigned long request, src_rate; +unsigned long request;int delta =100000 ;u32 mask =BIT (rcg->hid_width) -1 ;u32 hid_div; -int index =qcom_find_src_index (hw, rcg->parent_map, f.src); -struct clk *parent =clk_get_parent_by_index (hw->clk, index);for (; frac->num; frac++) { request = (rate * frac->den) / frac->num; - src_rate =__clk_round_rate (parent, request); -if ((src_rate < (request - delta)) || - (src_rate > (request + delta))) +if ((parent_rate < (request - delta)) || + (parent_rate > (request + delta)))continue ; regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
drivers/clk/ti/clk-dra7-atl.c +5 -0
@@ -252,6 +252,11 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev) } clk =of_clk_get_from_provider (&clkspec); +if (IS_ERR (clk)) { +pr_err ("%s: failed to get atl clock %d from provider\n" , + __func__, i); +return PTR_ERR (clk); + } cdesc =to_atl_desc (__clk_get_hw (clk)); cdesc->cinfo = cinfo;
drivers/clocksource/exynos_mct.c +30 -13
69 lines not on this page · raw message
drivers/dma/mv_xor.c +46 -26
91 lines not on this page · raw message
drivers/dma/mv_xor.h +1 -0
@@ -31,6 +31,7 @@#define XOR_OPERATION_MODE_XOR 0#define XOR_OPERATION_MODE_MEMCPY 2#define XOR_DESCRIPTOR_SWAP BIT(14) +#define XOR_DESC_SUCCESS 0x40000000#define XOR_DESC_DMA_OWNED BIT(31)#define XOR_DESC_EOD_INT_EN BIT(31)
drivers/edac/octeon_edac-l2c.c +1 -1
@@ -151,7 +151,7 @@ static int octeon_l2c_probe(struct platform_device *pdev) l2c->ctl_name ="octeon_l2c_err" ; -if (OCTEON_IS_MODEL (OCTEON_FAM_1_PLUS )) { +if (OCTEON_IS_OCTEON1PLUS ()) {union cvmx_l2t_err l2t_err;union cvmx_l2d_err l2d_err;
drivers/edac/octeon_edac-lmc.c +1 -1
@@ -234,7 +234,7 @@ static int octeon_lmc_edac_probe(struct platform_device *pdev) layers[0 ].size =1 ; layers[0 ].is_virt_csrow = false; -if (OCTEON_IS_MODEL (OCTEON_FAM_1_PLUS )) { +if (OCTEON_IS_OCTEON1PLUS ()) {union cvmx_lmcx_mem_cfg0 cfg0; cfg0.u64 =cvmx_read_csr (CVMX_LMCX_MEM_CFG0 (0 ));
drivers/edac/octeon_edac-pc.c +1 -1
@@ -73,7 +73,7 @@ static int co_cache_error_event(struct notifier_block *this,edac_device_handle_ce (p->ed, cpu,0 ,"dcache" );/* Clear the error indication */ -if (OCTEON_IS_MODEL (OCTEON_FAM_2 )) +if (OCTEON_IS_OCTEON2 ())write_octeon_c0_dcacheerr (1 );else write_octeon_c0_dcacheerr (0 );
drivers/firmware/dmi_scan.c +9 -4
@@ -89,9 +89,9 @@ static void dmi_table(u8 *buf,/* * Stop when we have seen all the items the table claimed to have -* (SMBIOS < 3.0 only) OR we reach an end-of-table marker OR we run -* off the end of the table (should never happen but sometimes does -* on bogus implementations.) +* (SMBIOS < 3.0 only) OR we reach an end-of-table marker (SMBIOS +* >= 3.0 only) OR we run off the end of the table (should never +* happen but sometimes does on bogus implementations.) */ while ((!dmi_num || i < dmi_num) && (data - buf +sizeof (struct dmi_header )) <= dmi_len) {
@@ -110,8 +110,13 @@ static void dmi_table(u8 *buf,/* * 7.45 End-of-Table (Type 127) [SMBIOS reference spec v3.0.0] +* For tables behind a 64-bit entry point, we have no item +* count and no exact table length, so stop on end-of-table +* marker. For tables behind a 32-bit entry point, we have +* seen OEM structures behind the end-of-table marker on +* some systems, so don't trust it. */ -if (dm->type ==DMI_ENTRY_END_OF_TABLE ) +if (!dmi_num && dm->type ==DMI_ENTRY_END_OF_TABLE )break ; data +=2 ;
drivers/gpu/drm/bridge/ptn3460.c +1 -0
@@ -15,6 +15,7 @@#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/of.h>
drivers/gpu/drm/drm_crtc.c +6 -6
@@ -2749,8 +2749,11 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,if (!drm_core_check_feature (dev,DRIVER_MODESET ))return -EINVAL ; -/* For some reason crtc x/y offsets are signed internally. */ -if (crtc_req->x >INT_MAX || crtc_req->y >INT_MAX ) +/* +* Universal plane src offsets are only 16.16, prevent havoc for +* drivers using universal plane code internally. +*/ +if (crtc_req->x &0xffff0000 || crtc_req->y &0xffff0000 )return -ERANGE ;drm_modeset_lock_all (dev);
@@ -5048,12 +5051,9 @@ void drm_mode_config_reset(struct drm_device *dev)if (encoder->funcs->reset) encoder->funcs->reset (encoder); -list_for_each_entry (connector, &dev->mode_config.connector_list, head) { - connector->status = connector_status_unknown; - +list_for_each_entry (connector, &dev->mode_config.connector_list, head)if (connector->funcs->reset) connector->funcs->reset (connector); - } }EXPORT_SYMBOL (drm_mode_config_reset);
drivers/gpu/drm/drm_dp_mst_topology.c +60 -7
126 lines not on this page · raw message
drivers/gpu/drm/drm_ioc32.c +60 -0
78 lines not on this page · raw message
drivers/gpu/drm/i915/i915_gem.c +1 -0
@@ -2401,6 +2401,7 @@ int __i915_add_request(struct intel_engine_cs *ring, } request->emitted_jiffies = jiffies; + ring->last_submitted_seqno = request->seqno;list_add_tail (&request->list, &ring->request_list); request->file_priv =NULL ;
drivers/gpu/drm/i915/i915_gem_gtt.c +3 -3
@@ -502,17 +502,17 @@ static void gen8_ppgtt_clear_range(struct i915_address_space *vm,struct page *page_table;if (WARN_ON (!ppgtt->pdp.page_directory[pdpe])) -continue ; +break ; pd = ppgtt->pdp.page_directory[pdpe];if (WARN_ON (!pd->page_table[pde])) -continue ; +break ; pt = pd->page_table[pde];if (WARN_ON (!pt->page)) -continue ; +break ; page_table = pt->page;
drivers/gpu/drm/i915/i915_ioc32.c +1 -1
@@ -204,7 +204,7 @@ long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)drm_ioctl_compat_t *fn =NULL ;int ret; -if (nr <DRM_COMMAND_BASE ) +if (nr <DRM_COMMAND_BASE || nr >=DRM_COMMAND_END )return drm_compat_ioctl (filp, cmd, arg);if (nr <DRM_COMMAND_BASE +ARRAY_SIZE (i915_compat_ioctls))
drivers/gpu/drm/i915/i915_irq.c +3 -10
@@ -2650,18 +2650,11 @@ static void gen8_disable_vblank(struct drm_device *dev, int pipe)spin_unlock_irqrestore (&dev_priv->irq_lock, irqflags); } -static struct drm_i915_gem_request * -ring_last_request (struct intel_engine_cs *ring) -{ -return list_entry (ring->request_list.prev, - struct drm_i915_gem_request, list); -} -static bool -ring_idle (struct intel_engine_cs *ring) +ring_idle (struct intel_engine_cs *ring,u32 seqno) {return (list_empty (&ring->request_list) || -i915_gem_request_completed (ring_last_request (ring), false)); +i915_seqno_passed (seqno, ring->last_submitted_seqno)); } static bool
@@ -2883,7 +2876,7 @@ static void i915_hangcheck_elapsed(struct work_struct *work) acthd =intel_ring_get_active_head (ring);if (ring->hangcheck.seqno == seqno) { -if (ring_idle (ring)) { +if (ring_idle (ring, seqno)) { ring->hangcheck.action =HANGCHECK_IDLE ;if (waitqueue_active (&ring->irq_queue)) {
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -3209,6 +3209,7 @@ enum skl_disp_power_wells {#define BLM_POLARITY_PNV (1 << 0)/* pnv only */ #define BLC_HIST_CTL (dev_priv->info.display_mmio_offset + 0x61260) +#define BLM_HISTOGRAM_ENABLE (1 << 31)/* New registers for PCH-split platforms. Safe where new bits show up, the * register layout machtes with gen4 BLC_PWM_CTL[12]. */
drivers/gpu/drm/i915/intel_display.c +13 -0
@@ -12499,6 +12499,16 @@ intel_check_primary_plane(struct drm_plane *plane, intel_crtc->atomic.wait_vblank = true; } +/* +* FIXME: Actually if we will still have any other plane enabled +* on the pipe we could let IPS enabled still, but for +* now lets consider that when we make primary invisible +* by setting DSPCNTR to 0 on update_primary_plane function +* IPS needs to be disable. +*/ +if (!state->visible || !fb) + intel_crtc->atomic.disable_ips = true; + intel_crtc->atomic.fb_bits |=INTEL_FRONTBUFFER_PRIMARY (intel_crtc->pipe);
@@ -12590,6 +12600,9 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)if (intel_crtc->atomic.disable_fbc)intel_fbc_disable (dev); +if (intel_crtc->atomic.disable_ips) +hsw_disable_ips (intel_crtc); +if (intel_crtc->atomic.pre_disable_primary)intel_pre_disable_primary (crtc);
drivers/gpu/drm/i915/intel_drv.h +1 -0
@@ -424,6 +424,7 @@ struct intel_crtc_atomic_commit {/* Sleepable operations to perform before commit */ bool wait_for_flips;bool disable_fbc; +bool disable_ips;bool pre_disable_primary;bool update_wm;unsigned disabled_planes;
drivers/gpu/drm/i915/intel_panel.c +8 -0
@@ -879,6 +879,14 @@ static void i9xx_enable_backlight(struct intel_connector *connector)/* XXX: combine this into above write? */ intel_panel_actually_set_backlight (connector, panel->backlight.level); + +/* +* Needed to enable backlight on some 855gm models. BLC_HIST_CTL is +* 855gm only, but checking for gen2 is safe, as 855gm is the only gen2 +* that has backlight. +*/ +if (IS_GEN2 (dev)) +I915_WRITE (BLC_HIST_CTL ,BLM_HISTOGRAM_ENABLE ); }static void i965_enable_backlight (struct intel_connector *connector)
drivers/gpu/drm/i915/intel_ringbuffer.h +7 -0
@@ -266,6 +266,13 @@ struct intel_engine_cs {* Do we have some not yet emitted requests outstanding? */ struct drm_i915_gem_request *outstanding_lazy_request; +/** +* Seqno of request most recently submitted to request_list. +* Used exclusively by hang checker to avoid grabbing lock while +* inspecting request list. +*/ +u32 last_submitted_seqno; +bool gpu_caches_dirty;wait_queue_head_t irq_queue;
drivers/gpu/drm/i915/intel_uncore.c +19 -7
@@ -1220,10 +1220,12 @@ int i915_reg_read_ioctl(struct drm_device *dev,struct drm_i915_private *dev_priv = dev->dev_private;struct drm_i915_reg_read *reg = data;struct register_whitelist const *entry = whitelist; +unsigned size; +u64 offset;int i, ret =0 ;for (i =0 ; i <ARRAY_SIZE (whitelist); i++, entry++) { -if (entry->offset == reg->offset && +if (entry->offset == (reg->offset & -entry->size) && (1 <<INTEL_INFO (dev)->gen & entry->gen_bitmask))break ; }
@@ -1231,23 +1233,33 @@ int i915_reg_read_ioctl(struct drm_device *dev,if (i ==ARRAY_SIZE (whitelist))return -EINVAL ; +/* We use the low bits to encode extra flags as the register should +* be naturally aligned (and those that are not so aligned merely +* limit the available flags for that register). +*/ + offset = entry->offset; + size = entry->size; + size |= reg->offset ^ offset; +intel_runtime_pm_get (dev_priv); -switch (entry->size) { +switch (size) { +case 8 |1 : + reg->val =I915_READ64_2x32 (offset, offset+4 ); +break ;case 8 : - reg->val =I915_READ64 (reg->offset); + reg->val =I915_READ64 (offset);break ;case 4 : - reg->val =I915_READ (reg->offset); + reg->val =I915_READ (offset);break ;case 2 : - reg->val =I915_READ16 (reg->offset); + reg->val =I915_READ16 (offset);break ;case 1 : - reg->val =I915_READ8 (reg->offset); + reg->val =I915_READ8 (offset);break ;default : -MISSING_CASE (entry->size); ret = -EINVAL ; goto out; }
drivers/gpu/drm/qxl/qxl_cmd.c +1 -0
@@ -505,6 +505,7 @@ int qxl_hw_surface_alloc(struct qxl_device *qdev, cmd = (struct qxl_surface_cmd *)qxl_release_map (qdev, release); cmd->type =QXL_SURFACE_CMD_CREATE ; + cmd->flags =QXL_SURF_FLAG_KEEP_DATA ; cmd->u.surface_create.format = surf->surf.format; cmd->u.surface_create.width = surf->surf.width; cmd->u.surface_create.height = surf->surf.height;
drivers/gpu/drm/qxl/qxl_ioctl.c +3 -1
@@ -122,8 +122,10 @@ static struct qxl_bo *qxlhw_handle_to_bo(struct qxl_device *qdev, qobj =gem_to_qxl_bo (gobj); ret =qxl_release_list_add (release, qobj); -if (ret) +if (ret) { +drm_gem_object_unreference_unlocked (gobj);return NULL ; + }return qobj; }
drivers/gpu/drm/radeon/ci_dpm.c +1 -1
@@ -5818,7 +5818,7 @@ int ci_dpm_init(struct radeon_device *rdev) tmp |=DPM_ENABLED ;break ;default : -DRM_ERROR ("Invalid PCC GPIO: %u!\n" , gpio.shift); +DRM_DEBUG ("Invalid PCC GPIO: %u!\n" , gpio.shift);break ; }WREG32_SMC (CNB_PWRMGT_CNTL , tmp);
drivers/gpu/drm/radeon/cik.c +226 -144
430 lines not on this page · raw message
drivers/gpu/drm/radeon/evergreen.c +217 -175
392 lines not on this page · raw message
drivers/gpu/drm/radeon/r600.c +87 -68
155 lines not on this page · raw message
drivers/gpu/drm/radeon/radeon_audio.c +18 -18
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/radeon/radeon_cursor.c +37 -47
84 lines not on this page · raw message
drivers/gpu/drm/radeon/radeon_device.c +33 -1
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/radeon/radeon_irq_kms.c +2 -0
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/radeon/si.c +192 -144
336 lines not on this page · raw message
drivers/gpu/drm/rockchip/rockchip_drm_gem.c +34 -33
67 lines not on this page · raw message
drivers/i2c/busses/i2c-at91.c +53 -17
70 lines not on this page · raw message
drivers/iio/common/hid-sensors/hid-sensor-trigger.c +10 -1
Lines of this file are not shown. View the raw message.
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +18 -0
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/md/dm-cache-policy-mq.c +28 -13
41 lines not on this page · raw message
drivers/md/dm-cache-target.c +38 -20
58 lines not on this page · raw message
drivers/md/persistent-data/dm-btree-remove.c +3 -3
Lines of this file are not shown. View the raw message.
drivers/md/persistent-data/dm-space-map-metadata.c +35 -15
50 lines not on this page · raw message
drivers/media/pci/saa7164/saa7164-encoder.c +6 -5
Lines of this file are not shown. View the raw message.
drivers/media/pci/saa7164/saa7164-vbi.c +6 -5
Lines of this file are not shown. View the raw message.
drivers/media/usb/dvb-usb/dib0700_core.c +40 -30
70 lines not on this page · raw message
drivers/media/usb/dvb-usb/dib0700_devices.c +6 -0
Lines of this file are not shown. View the raw message.
drivers/media/v4l2-core/videobuf2-core.c +23 -10
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/e1000e/82571.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/e1000e/ich8lan.c +5 -5
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/e1000e/netdev.c +8 -10
Lines of this file are not shown. View the raw message.
drivers/net/wireless/iwlwifi/mvm/debugfs.c +3 -2
Lines of this file are not shown. View the raw message.
drivers/net/wireless/iwlwifi/mvm/mac80211.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/iwlwifi/mvm/time-event.c +9 -6
Lines of this file are not shown. View the raw message.
drivers/net/wireless/rtlwifi/rtl8188ee/hw.c +0 -16
Lines of this file are not shown. View the raw message.
drivers/net/wireless/rtlwifi/rtl8192ee/hw.c +0 -17
Lines of this file are not shown. View the raw message.
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c +0 -13
Lines of this file are not shown. View the raw message.
drivers/net/wireless/rtlwifi/rtl8723be/hw.c +0 -17
Lines of this file are not shown. View the raw message.
drivers/net/wireless/rtlwifi/rtl8821ae/hw.c +0 -20
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mvebu/pinctrl-armada-370.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mvebu/pinctrl-armada-375.c +1 -3
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mvebu/pinctrl-armada-38x.c +21 -30
51 lines not on this page · raw message
drivers/pinctrl/mvebu/pinctrl-armada-39x.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mvebu/pinctrl-armada-xp.c +11 -26
Lines of this file are not shown. View the raw message.
drivers/staging/comedi/drivers/cb_pcimdas.c +4 -4
Lines of this file are not shown. View the raw message.
drivers/usb/core/hub.c +34 -50
84 lines not on this page · raw message
drivers/usb/gadget/function/f_mass_storage.c +13 -3
Lines of this file are not shown. View the raw message.
drivers/w1/slaves/w1_therm.c +47 -15
62 lines not on this page · raw message
fs/ext4/inode.c +37 -8
45 lines not on this page · raw message
fs/nfs/flexfilelayout/flexfilelayoutdev.c +4 -3
Lines of this file are not shown. View the raw message.
fs/overlayfs/readdir.c +49 -28
77 lines not on this page · raw message
samples/trace_events/trace-events-sample.h +5 -2
Lines of this file are not shown. View the raw message.
security/integrity/ima/ima_policy.c +100 -24
124 lines not on this page · raw message
security/integrity/ima/ima_template_lib.c +2 -1
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.