Skip to contentSkip to conversation

"tftp: adjust settings to be suitable for 100Mbit ethernet" breaks imx6

U-Boot Peng Fan 2 participants 3 messages Sep 6, 2015

lore
Share & tools
lore

Peng Fan

author Acked-by Joe Hershberger
#0 lore raw

Hi,

With the following patch, I met tftp errors on mx6qsabresd and mx6ul boards:
"
=> setenv serverip 10.193.102.217; setenv ipaddr 10.193.102.31;tftp ${loadaddr} zImage Using FEC device
TFTP from server 10.193.102.217; our IP address is 10.193.102.31 Filename 'zImage'.
Load address: 0x12000000
Loading: *
TFTP error: 'Failure to negotiate RFC1782 options' (8)
Starting again
"

Without the following patch, tftp work fine on mx6qsabresd and mx6ul board.

"
commit 620776d734e4b126c407f636bda825a594a17723

Author: Pavel Machek <[email protected]>
Date:   Tue Aug 18 14:34:26 2015 +0200

tftp: adjust settings to be suitable for 100Mbit ethernet

Adjust timouts and retry counts to be suitable for loaded ethernet network. With 5 seconds timeout, 10 retries maximum, tftp is impossible even on local network with single full-speed TCP connection.

100msec timeout should be suitable for most networks tftp is used on, that is local ethernets. Timeout count really needs to be way higher, as lost packets are normal when TCP is running over the same network.

Enforce 10msec minimum.

"

Regards,
Peng.

#1 lore raw

Hi Peng,

Quoted 32 lines · Peng Fan

Hi,

With the following patch, I met tftp errors on mx6qsabresd and mx6ul boards:
"
=> setenv serverip 10.193.102.217; setenv ipaddr 10.193.102.31;tftp ${loadaddr} zImage Using FEC device
TFTP from server 10.193.102.217; our IP address is 10.193.102.31 Filename 'zImage'.
Load address: 0x12000000
Loading: *
TFTP error: 'Failure to negotiate RFC1782 options' (8)
Starting again
"

Without the following patch, tftp work fine on mx6qsabresd and mx6ul board.

"
commit 620776d734e4b126c407f636bda825a594a17723

Author: Pavel Machek <[email protected]>
Date:   Tue Aug 18 14:34:26 2015 +0200

tftp: adjust settings to be suitable for 100Mbit ethernet

Adjust timouts and retry counts to be suitable for loaded ethernet network. With 5 seconds timeout, 10 retries maximum, tftp is impossible even on local network with single full-speed TCP connection.

100msec timeout should be suitable for most networks tftp is used on, that is local ethernets. Timeout count really needs to be way higher, as lost packets are normal when TCP is running over the same network.

Quoted 6 lines

Enforce 10msec minimum.

"

The revert patch [1] has already been applied in the u-boot-x86/master branch, waiting for upstream.

[1] http://git.denx.de/?p=u-boot/u-boot-x86.git;a=commitdiff;h=527ba17bfd058bd87d5ed4c65aa6f31bebb25dfe

Regards,
Bin

author
#2 lore raw

Hi Bin,

Quoted 42 lines · Bin Meng

Hi Peng,

Quoted 32 lines · Peng Fan

Hi,

With the following patch, I met tftp errors on mx6qsabresd and mx6ul boards:
"
=> setenv serverip 10.193.102.217; setenv ipaddr 10.193.102.31;tftp ${loadaddr} zImage Using FEC device
TFTP from server 10.193.102.217; our IP address is 10.193.102.31 Filename 'zImage'.
Load address: 0x12000000
Loading: *
TFTP error: 'Failure to negotiate RFC1782 options' (8)
Starting again
"

Without the following patch, tftp work fine on mx6qsabresd and mx6ul board.

"
commit 620776d734e4b126c407f636bda825a594a17723

Author: Pavel Machek <[email protected]>
Date:   Tue Aug 18 14:34:26 2015 +0200

tftp: adjust settings to be suitable for 100Mbit ethernet

Adjust timouts and retry counts to be suitable for loaded ethernet network. With 5 seconds timeout, 10 retries maximum, tftp is impossible even on local network with single full-speed TCP connection.

100msec timeout should be suitable for most networks tftp is used on, that is local ethernets. Timeout count really needs to be way higher, as lost packets are normal when TCP is running over the same network.

Quoted 6 lines

Enforce 10msec minimum.

"

Quoted 4 lines

The revert patch [1] has already been applied in the u-boot-x86/master branch, waiting for upstream.

[1] http://git.denx.de/?p=u-boot/u-boot-x86.git;a=commitdiff;h=527ba17bfd058bd87d5ed4c65aa6f31bebb25dfe

Thanks for this.

Regards,
Peng.

Quoted 3 lines

Regards,
Bin