Bisected broken Ethernet support on ODROID-X (Exynos4412 board)
Hello,
Ethernet support does not work anymore when using the current U-Boot (version v2014.10) on the ODROID-X board. Bisecting shows that this happened starting from commit 874dde80169e0a0c00020e2e0bbcd380c61097e3 ("dm: usb: exynos: Use driver model for USB"):
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=874dde80169e0a0c00020e2e0bbcd380c61097e3
Below are the logs from the serial console.
=== works properly ==
U-Boot 2015.04-00271-g52e6935-dirty (Oct 20 2015 - 16:38:09)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0
reading boot.scr
129 bytes read in 11 ms (10.7 KiB/s)
## Executing script at 40408000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found
=== fails ==
U-Boot 2015.04-00273-g78ab40b-dirty (Oct 20 2015 - 16:41:11)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0
reading boot.scr
129 bytes read in 12 ms (9.8 KiB/s)
## Executing script at 40408000
starting USB...
USB-1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
===
As a test, reverting f56da290b8df14a058b43735494dbbb0f8521a89 ("Drop the code that doesn't use driver model for USB.") and disabling CONFIG_DM_USB in odroid_defconfig makes it work again.
Signature · 2 lines
Best regards, Siarhei Siamashka
Hi,
Quoted 49 lines · Siarhei Siamashka
Hello,
Ethernet support does not work anymore when using the current U-Boot (version v2014.10) on the ODROID-X board. Bisecting shows that this happened starting from commit
874dde80169e0a0c00020e2e0bbcd380c61097e3("dm: usb: exynos: Use driver model for USB"):http://git.denx.de/?p=u-boot.git;a=commitdiff;h=874dde80169e0a0c00020e2e0bbcd380c61097e3Below are the logs from the serial console.
=== works properly ==
U-Boot 2015.04-00271-g52e6935-dirty (Oct 20 2015 - 16:38:09)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 11 ms (10.7 KiB/s)
## Executing script at 40408000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found=== fails ==
U-Boot 2015.04-00273-g78ab40b-dirty (Oct 20 2015 - 16:41:11)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 12 ms (9.8 KiB/s)
## Executing script at 40408000
starting USB...
USB-1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Quoted 5 lines
===
As a test, reverting
f56da290b8df14a058b43735494dbbb0f8521a89("Drop the code that doesn't use driver model for USB.") and disablingCONFIG_DM_USBinodroid_defconfigmakes it work again.
Does this problem happen on the XU3?
Are you able to debug this? You can use 'dm tree' to see what devices are present before and after the 'usb start'.
Regards,
Simon
Quoted 53 lines · On Tue, 20 Oct 2015 09:15:07 -0600 Simon Glass <[email protected]> wrote:
Hi,
Quoted 49 lines · Siarhei Siamashka
Hello,
Ethernet support does not work anymore when using the current U-Boot (version v2014.10) on the ODROID-X board. Bisecting shows that this happened starting from commit
874dde80169e0a0c00020e2e0bbcd380c61097e3("dm: usb: exynos: Use driver model for USB"):http://git.denx.de/?p=u-boot.git;a=commitdiff;h=874dde80169e0a0c00020e2e0bbcd380c61097e3Below are the logs from the serial console.
=== works properly ==
U-Boot 2015.04-00271-g52e6935-dirty (Oct 20 2015 - 16:38:09)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 11 ms (10.7 KiB/s)
## Executing script at 40408000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found=== fails ==
U-Boot 2015.04-00273-g78ab40b-dirty (Oct 20 2015 - 16:41:11)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 12 ms (9.8 KiB/s)
## Executing script at 40408000
starting USB...
USB-1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Quoted 7 lines
Quoted 5 lines
===
As a test, reverting
f56da290b8df14a058b43735494dbbb0f8521a89("Drop the code that doesn't use driver model for USB.") and disablingCONFIG_DM_USBinodroid_defconfigmakes it work again.Does this problem happen on the XU3?
I don't have XU3. My only board is ODROID-X (the same as ODROID-X2, but with slower CPU clock speed and less RAM).
Quoted 1 line
Are you able to debug this?
I'm not sure if I can really spend much time on it. Debugging this issue would require comparing the old exynos usb code and the new dm code to see where exactly they differ. For example, the new 'ehci_usb_probe()' function does not call 'board_usb_init()' while the old 'ehci_hcd_init()' function did:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/usb/host/ehci-exynos.c;h=86cf6312febc30b7e142146c3b4763a6a871d5a6;hb=02e4d3fbc54b345883d9bead4f2a911d0f0f59b1#l329
And just calling 'board_usb_init()' on ODROID-X is still not enough to get this problem resolved for the CONFIG_DM_USB=y configuration, so there must be something else.
I also don't quite like that the usb parts of the U-Boot dts files for exynos differ from the Linux dts files.
So far I'm satisfied that the old exynos usb code still works if its removal is reverted. And debugging U-Boot was not my primary intention when fetching this old ODROID-X board from a closet. I had plans to do some other interesting tests with it :-)
If Przemyslaw Marczak (the ODROID boards maintainer) could confirm the problem on ODROID-X2 and take care of it, then this would be the best for me.
Quoted 2 lines
You can use 'dm tree' to see what devices are present before and after the 'usb start'.
Thanks, this indeed prints some useful information. Here is the log:
U-Boot 2015.10-00001-g0374f7f-dirty (Jan 01 1970 - 00:00:00 +0000)
CPU: Exynos4412 @ 1 GHz Model: Odroid based on Exynos4412 Board: Odroid based on Exynos4412 Model: x DRAM: 1 GiB LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling LDO21 at TFLASH_2.8V: set 2800000 uV; enabling MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0
reading boot.scr
215 bytes read in 107 ms (2 KiB/s)
## Executing script at 40408000
=== dm tree before usb start ===
Class Probed Name
----------------------------------------
root [ + ] root_driver serial [ ] |-- serial at 13800000 serial [ + ] |-- serial at 13810000 serial [ ] |-- serial at 13820000 serial [ ] |-- serial at 13830000 serial [ ] |-- serial at 13840000 i2c [ + ] |-- i2c at 13860000 pmic [ + ] | `-- max77686_pmic at 09 regulator [ ] | |-- LDO1 regulator [ ] | |-- LDO2 regulator [ ] | |-- LDO3 regulator [ ] | |-- LDO4 regulator [ ] | |-- LDO5 regulator [ ] | |-- LDO6 regulator [ ] | |-- LDO7 regulator [ ] | |-- LDO8 regulator [ ] | |-- LDO10 regulator [ ] | |-- LDO11 regulator [ ] | |-- LDO12 regulator [ ] | |-- LDO13 regulator [ ] | |-- LDO14 regulator [ ] | |-- LDO15 regulator [ ] | |-- LDO16 regulator [ ] | |-- LDO17 regulator [ + ] | |-- LDO20 regulator [ + ] | |-- LDO21 regulator [ + ] | |-- LDO22 regulator [ ] | |-- LDO25 regulator [ ] | |-- BUCK1 regulator [ ] | |-- BUCK2 regulator [ ] | |-- BUCK3 regulator [ ] | |-- BUCK4 regulator [ ] | |-- BUCK5 regulator [ ] | |-- BUCK6 regulator [ ] | |-- BUCK7 regulator [ ] | `-- BUCK8 i2c [ ] |-- i2c at 13870000 i2c [ ] |-- i2c at 13880000 i2c [ ] |-- i2c at 13890000 i2c [ ] |-- i2c at 138a0000 i2c [ ] |-- i2c at 138b0000 i2c [ ] |-- i2c at 138c0000 i2c [ ] |-- i2c at 138d0000 gpio [ + ] |-- pinctrl at 11400000 gpio [ + ] | |-- gpa0 gpio [ + ] | |-- gpa1 gpio [ + ] | |-- gpb gpio [ + ] | |-- gpc0 gpio [ + ] | |-- gpc1 gpio [ + ] | |-- gpd0 gpio [ + ] | |-- gpd1 gpio [ + ] | |-- gpf0 gpio [ + ] | |-- gpf1 gpio [ + ] | |-- gpf2 gpio [ + ] | |-- gpf3 gpio [ + ] | |-- gpj0 gpio [ + ] | `-- gpj1 gpio [ + ] |-- pinctrl at 11000000 gpio [ + ] | |-- gpk0 gpio [ + ] | |-- gpk1 gpio [ + ] | |-- gpk2 gpio [ + ] | |-- gpk3 gpio [ + ] | |-- gpl0 gpio [ + ] | |-- gpl1 gpio [ + ] | |-- gpl2 gpio [ + ] | |-- gpy0 gpio [ + ] | |-- gpy1 gpio [ + ] | |-- gpy2 gpio [ + ] | |-- gpy3 gpio [ + ] | |-- gpy4 gpio [ + ] | |-- gpy5 gpio [ + ] | |-- gpy6 gpio [ + ] | |-- gpm0 gpio [ + ] | |-- gpm1 gpio [ + ] | |-- gpm2 gpio [ + ] | |-- gpm3 gpio [ + ] | |-- gpm4 gpio [ + ] | |-- gpx0 gpio [ + ] | |-- gpx1 gpio [ + ] | |-- gpx2 gpio [ + ] | `-- gpx3 gpio [ ] |-- pinctrl at 03860000 gpio [ ] | `-- gpz gpio [ ] |-- pinctrl at 106E0000 gpio [ ] | |-- gpv0 gpio [ ] | |-- gpv1 gpio [ ] | |-- gpv2 gpio [ ] | |-- gpv3 gpio [ ] | `-- gpv4 usb [ ] `-- ehci at 12580000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found === dm tree after usb start ===
Class Probed Name
----------------------------------------
root [ + ] root_driver serial [ ] |-- serial at 13800000 serial [ + ] |-- serial at 13810000 serial [ ] |-- serial at 13820000 serial [ ] |-- serial at 13830000 serial [ ] |-- serial at 13840000 i2c [ + ] |-- i2c at 13860000 pmic [ + ] | `-- max77686_pmic at 09 regulator [ ] | |-- LDO1 regulator [ ] | |-- LDO2 regulator [ ] | |-- LDO3 regulator [ ] | |-- LDO4 regulator [ ] | |-- LDO5 regulator [ ] | |-- LDO6 regulator [ ] | |-- LDO7 regulator [ ] | |-- LDO8 regulator [ ] | |-- LDO10 regulator [ ] | |-- LDO11 regulator [ ] | |-- LDO12 regulator [ ] | |-- LDO13 regulator [ ] | |-- LDO14 regulator [ ] | |-- LDO15 regulator [ ] | |-- LDO16 regulator [ ] | |-- LDO17 regulator [ + ] | |-- LDO20 regulator [ + ] | |-- LDO21 regulator [ + ] | |-- LDO22 regulator [ ] | |-- LDO25 regulator [ ] | |-- BUCK1 regulator [ ] | |-- BUCK2 regulator [ ] | |-- BUCK3 regulator [ ] | |-- BUCK4 regulator [ ] | |-- BUCK5 regulator [ ] | |-- BUCK6 regulator [ ] | |-- BUCK7 regulator [ ] | `-- BUCK8 i2c [ ] |-- i2c at 13870000 i2c [ ] |-- i2c at 13880000 i2c [ ] |-- i2c at 13890000 i2c [ ] |-- i2c at 138a0000 i2c [ ] |-- i2c at 138b0000 i2c [ ] |-- i2c at 138c0000 i2c [ ] |-- i2c at 138d0000 gpio [ + ] |-- pinctrl at 11400000 gpio [ + ] | |-- gpa0 gpio [ + ] | |-- gpa1 gpio [ + ] | |-- gpb gpio [ + ] | |-- gpc0 gpio [ + ] | |-- gpc1 gpio [ + ] | |-- gpd0 gpio [ + ] | |-- gpd1 gpio [ + ] | |-- gpf0 gpio [ + ] | |-- gpf1 gpio [ + ] | |-- gpf2 gpio [ + ] | |-- gpf3 gpio [ + ] | |-- gpj0 gpio [ + ] | `-- gpj1 gpio [ + ] |-- pinctrl at 11000000 gpio [ + ] | |-- gpk0 gpio [ + ] | |-- gpk1 gpio [ + ] | |-- gpk2 gpio [ + ] | |-- gpk3 gpio [ + ] | |-- gpl0 gpio [ + ] | |-- gpl1 gpio [ + ] | |-- gpl2 gpio [ + ] | |-- gpy0 gpio [ + ] | |-- gpy1 gpio [ + ] | |-- gpy2 gpio [ + ] | |-- gpy3 gpio [ + ] | |-- gpy4 gpio [ + ] | |-- gpy5 gpio [ + ] | |-- gpy6 gpio [ + ] | |-- gpm0 gpio [ + ] | |-- gpm1 gpio [ + ] | |-- gpm2 gpio [ + ] | |-- gpm3 gpio [ + ] | |-- gpm4 gpio [ + ] | |-- gpx0 gpio [ + ] | |-- gpx1 gpio [ + ] | |-- gpx2 gpio [ + ] | `-- gpx3 gpio [ ] |-- pinctrl at 03860000 gpio [ ] | `-- gpz gpio [ ] |-- pinctrl at 106E0000 gpio [ ] | |-- gpv0 gpio [ ] | |-- gpv1 gpio [ ] | |-- gpv2 gpio [ ] | |-- gpv3 gpio [ ] | `-- gpv4 usb [ + ] `-- ehci at 12580000 usb_hub [ + ] `-- usb_hub
Signature · 2 lines
Best regards, Siarhei Siamashka
Hi Siarhei,
Quoted 59 lines
Quoted 56 lines · On Tue, 20 Oct 2015 09:15:07 -0600 Simon Glass <[email protected]> wrote:
Hi,
Quoted 52 lines · Siarhei Siamashka
Hello,
Ethernet support does not work anymore when using the current U-Boot (version v2014.10) on the ODROID-X board. Bisecting shows that this happened starting from commit
874dde80169e0a0c00020e2e0bbcd380c61097e3("dm: usb: exynos: Use driver model for USB"):
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=874dde80169e0a0c00020e2e0bbcd380c61097e3Below are the logs from the serial console.
=== works properly ==
U-Boot 2015.04-00271-g52e6935-dirty (Oct 20 2015 - 16:38:09)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 11 ms (10.7 KiB/s)
## Executing script at 40408000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s)
found scanning usb for ethernet devices... 1 Ethernet Device(s) found=== fails ==
U-Boot 2015.04-00273-g78ab40b-dirty (Oct 20 2015 - 16:41:11)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 12 ms (9.8 KiB/s)
## Executing script at 40408000
starting USB...
USB-1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s)
found
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
===
As a test, reverting
f56da290b8df14a058b43735494dbbb0f8521a89("Drop the code that doesn't use driver model for USB.") and disablingCONFIG_DM_USBinodroid_defconfigmakes it work again.Does this problem happen on the XU3?
Yes, It does.
I'm struggling to fix this issue for a few days now.
What is interesting though, you can run ethernet by calling:
"usb start" and afterwards "usb reset".
Quoted 5 lines
I don't have XU3. My only board is ODROID-X (the same as ODROID-X2, but with slower CPU clock speed and less RAM).
Quoted 1 line
Are you able to debug this?
Quoted 7 lines
I'm not sure if I can really spend much time on it. Debugging this issue would require comparing the old exynos usb code and the new dm code to see where exactly they differ. For example, the new '
ehci_usb_probe()' function does not call 'board_usb_init()' while the old 'ehci_hcd_init()' function did:http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/usb/host/ehci-exynos.c;h=86cf6312febc30b7e142146c3b4763a6a871d5a6;hb=02e4d3fbc54b345883d9bead4f2a911d0f0f59b1#l329And just calling '
board_usb_init()' on ODROID-X is still not enough
I will say even more - it seems like the issue is not related to any "basic" initialization (i.e. the lack of calling ehci_usb_probe|reset_usb_phy) called just before calling "usb start".
Quoted 2 lines
to get this problem resolved for the
CONFIG_DM_USB=yconfiguration, so there must be something else.
+1
Quoted 3 lines
I also don't quite like that the usb parts of the U-Boot dts files for exynos differ from the Linux dts files.
This is a really good questions. We have discussed it recently on ELCE and there is no good solution for it.
We made a mistake to allow non Linux compliant bindings to slip into u-boot. Now we must cope with (or fix) this mess.
Quoted 3 lines
So far I'm satisfied that the old exynos usb code still works if its removal is reverted.
As I've stated above - please try "usb start" and "usb reset" afterwards.
Quoted 7 lines
And debugging U-Boot was not my primary
intention when fetching this old ODROID-X board from a closet. I had plans to do some other interesting tests with it :-)If Przemyslaw Marczak (the ODROID boards maintainer) could confirm the problem on ODROID-X2 and take care of it, then this would be the best for me.
I'm working on this issue now.
Quoted 214 lines
Quoted 3 lines
You can use 'dm tree' to see what devices are present before and after the 'usb start'.
Thanks, this indeed prints some useful information. Here is the log:
U-Boot 2015.10-00001-g0374f7f-dirty (Jan 01 1970 - 00:00:00 +0000)
CPU: Exynos4412 @ 1 GHz Model: Odroid based on Exynos4412 Board: Odroid based on Exynos4412 Model: x DRAM: 1 GiB LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling LDO21 at TFLASH_2.8V: set 2800000 uV; enabling MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
215 bytes read in 107 ms (2 KiB/s)
## Executing script at 40408000
=== dm tree before usb start ===
Class Probed Name
----------------------------------------root [ + ] root_driver serial [ ] |-- serial at 13800000 serial [ + ] |-- serial at 13810000 serial [ ] |-- serial at 13820000 serial [ ] |-- serial at 13830000 serial [ ] |-- serial at 13840000 i2c [ + ] |-- i2c at 13860000 pmic [ + ] | `-- max77686_pmic at 09 regulator [ ] | |-- LDO1 regulator [ ] | |-- LDO2 regulator [ ] | |-- LDO3 regulator [ ] | |-- LDO4 regulator [ ] | |-- LDO5 regulator [ ] | |-- LDO6 regulator [ ] | |-- LDO7 regulator [ ] | |-- LDO8 regulator [ ] | |-- LDO10 regulator [ ] | |-- LDO11 regulator [ ] | |-- LDO12 regulator [ ] | |-- LDO13 regulator [ ] | |-- LDO14 regulator [ ] | |-- LDO15 regulator [ ] | |-- LDO16 regulator [ ] | |-- LDO17 regulator [ + ] | |-- LDO20 regulator [ + ] | |-- LDO21 regulator [ + ] | |-- LDO22 regulator [ ] | |-- LDO25 regulator [ ] | |-- BUCK1 regulator [ ] | |-- BUCK2 regulator [ ] | |-- BUCK3 regulator [ ] | |-- BUCK4 regulator [ ] | |-- BUCK5 regulator [ ] | |-- BUCK6 regulator [ ] | |-- BUCK7 regulator [ ] | `-- BUCK8 i2c [ ] |-- i2c at 13870000 i2c [ ] |-- i2c at 13880000 i2c [ ] |-- i2c at 13890000 i2c [ ] |-- i2c at 138a0000 i2c [ ] |-- i2c at 138b0000 i2c [ ] |-- i2c at 138c0000 i2c [ ] |-- i2c at 138d0000 gpio [ + ] |-- pinctrl at 11400000 gpio [ + ] | |-- gpa0 gpio [ + ] | |-- gpa1 gpio [ + ] | |-- gpb gpio [ + ] | |-- gpc0 gpio [ + ] | |-- gpc1 gpio [ + ] | |-- gpd0 gpio [ + ] | |-- gpd1 gpio [ + ] | |-- gpf0 gpio [ + ] | |-- gpf1 gpio [ + ] | |-- gpf2 gpio [ + ] | |-- gpf3 gpio [ + ] | |-- gpj0 gpio [ + ] | `-- gpj1 gpio [ + ] |-- pinctrl at 11000000 gpio [ + ] | |-- gpk0 gpio [ + ] | |-- gpk1 gpio [ + ] | |-- gpk2 gpio [ + ] | |-- gpk3 gpio [ + ] | |-- gpl0 gpio [ + ] | |-- gpl1 gpio [ + ] | |-- gpl2 gpio [ + ] | |-- gpy0 gpio [ + ] | |-- gpy1 gpio [ + ] | |-- gpy2 gpio [ + ] | |-- gpy3 gpio [ + ] | |-- gpy4 gpio [ + ] | |-- gpy5 gpio [ + ] | |-- gpy6 gpio [ + ] | |-- gpm0 gpio [ + ] | |-- gpm1 gpio [ + ] | |-- gpm2 gpio [ + ] | |-- gpm3 gpio [ + ] | |-- gpm4 gpio [ + ] | |-- gpx0 gpio [ + ] | |-- gpx1 gpio [ + ] | |-- gpx2 gpio [ + ] | `-- gpx3 gpio [ ] |-- pinctrl at 03860000 gpio [ ] | `-- gpz gpio [ ] |-- pinctrl at 106E0000 gpio [ ] | |-- gpv0 gpio [ ] | |-- gpv1 gpio [ ] | |-- gpv2 gpio [ ] | |-- gpv3 gpio [ ] | `-- gpv4 usb [ ] `-- ehci at 12580000starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found === dm tree after usb start ===
Class Probed Name
----------------------------------------root [ + ] root_driver serial [ ] |-- serial at 13800000 serial [ + ] |-- serial at 13810000 serial [ ] |-- serial at 13820000 serial [ ] |-- serial at 13830000 serial [ ] |-- serial at 13840000 i2c [ + ] |-- i2c at 13860000 pmic [ + ] | `-- max77686_pmic at 09 regulator [ ] | |-- LDO1 regulator [ ] | |-- LDO2 regulator [ ] | |-- LDO3 regulator [ ] | |-- LDO4 regulator [ ] | |-- LDO5 regulator [ ] | |-- LDO6 regulator [ ] | |-- LDO7 regulator [ ] | |-- LDO8 regulator [ ] | |-- LDO10 regulator [ ] | |-- LDO11 regulator [ ] | |-- LDO12 regulator [ ] | |-- LDO13 regulator [ ] | |-- LDO14 regulator [ ] | |-- LDO15 regulator [ ] | |-- LDO16 regulator [ ] | |-- LDO17 regulator [ + ] | |-- LDO20 regulator [ + ] | |-- LDO21 regulator [ + ] | |-- LDO22 regulator [ ] | |-- LDO25 regulator [ ] | |-- BUCK1 regulator [ ] | |-- BUCK2 regulator [ ] | |-- BUCK3 regulator [ ] | |-- BUCK4 regulator [ ] | |-- BUCK5 regulator [ ] | |-- BUCK6 regulator [ ] | |-- BUCK7 regulator [ ] | `-- BUCK8 i2c [ ] |-- i2c at 13870000 i2c [ ] |-- i2c at 13880000 i2c [ ] |-- i2c at 13890000 i2c [ ] |-- i2c at 138a0000 i2c [ ] |-- i2c at 138b0000 i2c [ ] |-- i2c at 138c0000 i2c [ ] |-- i2c at 138d0000 gpio [ + ] |-- pinctrl at 11400000 gpio [ + ] | |-- gpa0 gpio [ + ] | |-- gpa1 gpio [ + ] | |-- gpb gpio [ + ] | |-- gpc0 gpio [ + ] | |-- gpc1 gpio [ + ] | |-- gpd0 gpio [ + ] | |-- gpd1 gpio [ + ] | |-- gpf0 gpio [ + ] | |-- gpf1 gpio [ + ] | |-- gpf2 gpio [ + ] | |-- gpf3 gpio [ + ] | |-- gpj0 gpio [ + ] | `-- gpj1 gpio [ + ] |-- pinctrl at 11000000 gpio [ + ] | |-- gpk0 gpio [ + ] | |-- gpk1 gpio [ + ] | |-- gpk2 gpio [ + ] | |-- gpk3 gpio [ + ] | |-- gpl0 gpio [ + ] | |-- gpl1 gpio [ + ] | |-- gpl2 gpio [ + ] | |-- gpy0 gpio [ + ] | |-- gpy1 gpio [ + ] | |-- gpy2 gpio [ + ] | |-- gpy3 gpio [ + ] | |-- gpy4 gpio [ + ] | |-- gpy5 gpio [ + ] | |-- gpy6 gpio [ + ] | |-- gpm0 gpio [ + ] | |-- gpm1 gpio [ + ] | |-- gpm2 gpio [ + ] | |-- gpm3 gpio [ + ] | |-- gpm4 gpio [ + ] | |-- gpx0 gpio [ + ] | |-- gpx1 gpio [ + ] | |-- gpx2 gpio [ + ] | `-- gpx3 gpio [ ] |-- pinctrl at 03860000 gpio [ ] | `-- gpz gpio [ ] |-- pinctrl at 106E0000 gpio [ ] | |-- gpv0 gpio [ ] | |-- gpv1 gpio [ ] | |-- gpv2 gpio [ ] | |-- gpv3 gpio [ ] | `-- gpv4 usb [ + ] `-- ehci at 12580000 usb_hub [ + ] `-- usb_hub
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Quoted 70 lines · On Wed, 21 Oct 2015 10:06:09 +0200 Lukasz Majewski <[email protected]>…
Hi Siarhei,
Quoted 59 lines
Quoted 56 lines · On Tue, 20 Oct 2015 09:15:07 -0600 Simon Glass <[email protected]> wrote:
Hi,
Quoted 52 lines · Siarhei Siamashka
Hello,
Ethernet support does not work anymore when using the current U-Boot (version v2014.10) on the ODROID-X board. Bisecting shows that this happened starting from commit
874dde80169e0a0c00020e2e0bbcd380c61097e3("dm: usb: exynos: Use driver model for USB"):
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=874dde80169e0a0c00020e2e0bbcd380c61097e3Below are the logs from the serial console.
=== works properly ==
U-Boot 2015.04-00271-g52e6935-dirty (Oct 20 2015 - 16:38:09)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 11 ms (10.7 KiB/s)
## Executing script at 40408000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s)
found scanning usb for ethernet devices... 1 Ethernet Device(s) found=== fails ==
U-Boot 2015.04-00273-g78ab40b-dirty (Oct 20 2015 - 16:41:11)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 12 ms (9.8 KiB/s)
## Executing script at 40408000
starting USB...
USB-1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s)
foundQuoted 8 lines
Quoted 7 lines
Quoted 5 lines
===
As a test, reverting
f56da290b8df14a058b43735494dbbb0f8521a89("Drop the code that doesn't use driver model for USB.") and disablingCONFIG_DM_USBinodroid_defconfigmakes it work again.Does this problem happen on the XU3?
Quoted 6 lines
Yes, It does.
I'm struggling to fix this issue for a few days now.
What is interesting though, you can run ethernet by calling:
"usb start" and afterwards "usb reset".
That's a very interesting observation indeed.
Quoted 23 lines
Quoted 5 lines
I don't have XU3. My only board is ODROID-X (the same as ODROID-X2, but with slower CPU clock speed and less RAM).
Quoted 1 line
Are you able to debug this?
Quoted 7 lines
I'm not sure if I can really spend much time on it. Debugging this issue would require comparing the old exynos usb code and the new dm code to see where exactly they differ. For example, the new '
ehci_usb_probe()' function does not call 'board_usb_init()' while the old 'ehci_hcd_init()' function did:http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/usb/host/ehci-exynos.c;h=86cf6312febc30b7e142146c3b4763a6a871d5a6;hb=02e4d3fbc54b345883d9bead4f2a911d0f0f59b1#l329And just calling '
board_usb_init()' on ODROID-X is still not enoughI will say even more - it seems like the issue is not related to any "basic" initialization (i.e. the lack of calling ehci_usb_probe|reset_usb_phy) called just before calling "usb start".
Quoted 2 lines
to get this problem resolved for the
CONFIG_DM_USB=yconfiguration, so there must be something else.+1
Quoted 1 line
Quoted 8 lines
Quoted 2 lines
I also don't quite like that the usb parts of the U-Boot dts files for exynos differ from the Linux dts files.
This is a really good questions. We have discussed it recently on ELCE and there is no good solution for it.
We made a mistake to allow non Linux compliant bindings to slip into u-boot. Now we must cope with (or fix) this mess.
OK, I see. Thanks for explaining.
But if the kernel is considered to be the primary source of dts files, then probably U-Boot needs to be eventually adjusted to match?
Quoted 5 lines
Quoted 2 lines
So far I'm satisfied that the old exynos usb code still works if its removal is reverted.
As I've stated above - please try "usb start" and "usb reset" afterwards.
Thanks, doing "usb start" followed by "usb reset" makes the ethernet work on ODROID-X with the CONFIG_DM_USB=y configuration if I also add a missing call to the 'board_usb_init()' function. It does a bit of necessary setup magic for odroid:
http://git.denx.de/?p=u-boot.git;a=blob;f=board/samsung/odroid/odroid.c;hb=v2015.10#l467
And if there is no call to 'board_usb_init()', then the ethernet does not work on ODROID-X after "usb reset".
Quoted 9 lines
Quoted 7 lines
And debugging U-Boot was not my primary
intention when fetching this old ODROID-X board from a closet. I had plans to do some other interesting tests with it :-)If Przemyslaw Marczak (the ODROID boards maintainer) could confirm the problem on ODROID-X2 and take care of it, then this would be the best for me.
I'm working on this issue now.
This is a very good news. Thanks a lot! I'll be happy to test the fixes.
Signature · 2 lines
Best regards, Siarhei Siamashka
Hi Siarhei,
Quoted 114 lines
Quoted 71 lines · On Wed, 21 Oct 2015 10:06:09 +0200 Lukasz Majewski <[email protected]>…
Hi Siarhei,
Quoted 59 lines
Quoted 56 lines · On Tue, 20 Oct 2015 09:15:07 -0600 Simon Glass <[email protected]> wrote:
Hi,
Quoted 52 lines · Siarhei Siamashka
Hello,
Ethernet support does not work anymore when using the current U-Boot (version v2014.10) on the ODROID-X board. Bisecting shows that this happened starting from commit
874dde80169e0a0c00020e2e0bbcd380c61097e3("dm: usb: exynos:
Use driver model for USB"):
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=874dde80169e0a0c00020e2e0bbcd380c61097e3Below are the logs from the serial console.
=== works properly ==
U-Boot 2015.04-00271-g52e6935-dirty (Oct 20 2015 - 16:38:09)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 11 ms (10.7 KiB/s)
## Executing script at 40408000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s)
found scanning usb for ethernet devices... 1 Ethernet Device(s) found=== fails ==
U-Boot 2015.04-00273-g78ab40b-dirty (Oct 20 2015 - 16:41:11)
CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 1 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Net: No ethernet found. Hit any key to stop autoboot: 0reading boot.scr
129 bytes read in 12 ms (9.8 KiB/s)
## Executing script at 40408000
starting USB...
USB-1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet
Device(s) foundQuoted 9 lines
Quoted 8 lines
Quoted 6 lines
===
As a test, reverting
f56da290b8df14a058b43735494dbbb0f8521a89("Drop the code that doesn't use driver model for USB.") and disablingCONFIG_DM_USBinodroid_defconfigmakes it work again.Does this problem happen on the XU3?
Quoted 6 lines
Yes, It does.
I'm struggling to fix this issue for a few days now.
What is interesting though, you can run ethernet by calling:
"usb start" and afterwards "usb reset".That's a very interesting observation indeed.
Quoted 31 lines
Quoted 5 lines
I don't have XU3. My only board is ODROID-X (the same as ODROID-X2, but with slower CPU clock speed and less RAM).
Quoted 1 line
Are you able to debug this?
Quoted 8 lines
I'm not sure if I can really spend much time on it. Debugging this issue would require comparing the old exynos usb code and the new dm code to see where exactly they differ. For example, the new '
ehci_usb_probe()' function does not call 'board_usb_init()' while the old 'ehci_hcd_init()' function did:http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/usb/host/ehci-exynos.c;h=86cf6312febc30b7e142146c3b4763a6a871d5a6;hb=02e4d3fbc54b345883d9bead4f2a911d0f0f59b1#l329And just calling '
board_usb_init()' on ODROID-X is still not enoughI will say even more - it seems like the issue is not related to any "basic" initialization (i.e. the lack of calling ehci_usb_probe|reset_usb_phy) called just before calling "usb start".
Quoted 2 lines
to get this problem resolved for the
CONFIG_DM_USB=yconfiguration, so there must be something else.+1
Quoted 3 lines
I also don't quite like that the usb parts of the U-Boot dts files for exynos differ from the Linux dts files.
This is a really good questions. We have discussed it recently on ELCE and there is no good solution for it.
Quoted 7 lines
Quoted 2 lines
We made a mistake to allow non Linux compliant bindings to slip into u-boot. Now we must cope with (or fix) this mess.
OK, I see. Thanks for explaining.
But if the kernel is considered to be the primary source of dts files, then probably U-Boot needs to be eventually adjusted to match?
We will try to converge to linux kernel, however such process will take some time, since it is almost impossible to change all bindings at once.
Quoted 20 lines
Quoted 6 lines
Quoted 3 lines
So far I'm satisfied that the old exynos usb code still works if its removal is reverted.
As I've stated above - please try "usb start" and "usb reset" afterwards.
Thanks, doing "usb start" followed by "usb reset" makes the ethernet work on ODROID-X with the
CONFIG_DM_USB=yconfiguration if I also add a missing call to the 'board_usb_init()' function. It does a bit of necessary setup magic for odroid:http://git.denx.de/?p=u-boot.git;a=blob;f=board/samsung/odroid/odroid.c;hb=v2015.10#l467And if there is no call to '
board_usb_init()', then the ethernet does not work on ODROID-X after "usb reset".Quoted 4 lines
Quoted 4 lines
And debugging U-Boot was not my primary
intention when fetching this old ODROID-X board from a closet. I had plans to do some other interesting tests with it :-)
Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
If Przemyslaw Marczak (the ODROID boards maintainer) could confirm the problem on ODROID-X2 and take care of it, then this would be the best for me.
I'm working on this issue now.
This is a very good news. Thanks a lot! I'll be happy to test the fixes.
Thanks,
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group