simple_alloc space tramples initrd
Hi,
A powerpc machine I'm working on has this problem where the simple_alloc_init() area is trampling the initrd. The two are placed fairly close together.
I have a fix for this proposed to add a section into arch/powerpc/boot/zImage.lds.S called "mallocarea" to account for this space, but not all powerpc platforms use simple_alloc_init(). So for those platforms it's a waste.
Another alternative is to alter the bootloader to place more space between the kernel image and initrd image.
I wanted to get some feedback on the right way to fix this. It seems like it could be a generic issue on powerpc, or it's possibly already fixed someplace and I just haven't noticed.
Any feedback appreciated.
Daniel
Quoted 5 lines · On Fri, 2016-01-08 at 09:45 -0800, [email protected] wrote:
Hi,
A powerpc machine I'm working on has this problem where the
simple_alloc_init()area is trampling the initrd. The two are placed fairly close together.
Which machine / platform?
Quoted 4 lines
I have a fix for this proposed to add a section into
arch/powerpc/boot/zImage.lds.Scalled "mallocarea" to account for this space, but not all powerpc platforms usesimple_alloc_init(). So for those platforms it's a waste.
Yeah I don't really like the sound of that. We could do it if it was behind a CONFIG option, but hopefully there is a better solution.
Quoted 6 lines
Another alternative is to alter the bootloader to place more space between the kernel image and initrd image.
I wanted to get some feedback on the right way to fix this. It seems like it could be a generic issue on powerpc, or it's possibly already fixed someplace and I just haven't noticed.
I don't really know that code very well. But ideally either the boot loader gives you space, or the platform boot code is smart enough to detect that there is insufficient room and puts the heap somewhere else.
cheers
Quoted 8 lines · Michael Ellerman
Quoted 5 lines · On Fri, 2016-01-08 at 09:45 -0800, [email protected] wrote:
Hi,
A powerpc machine I'm working on has this problem where the
simple_alloc_init()area is trampling the initrd. The two are placed fairly close together.Which machine / platform?
It's not upstream yet. I'm still putting the patches together, that's when this issue came up. I can send an RFC if you want to look at the patches.
Quoted 11 lines
Quoted 4 lines
I have a fix for this proposed to add a section into
arch/powerpc/boot/zImage.lds.Scalled "mallocarea" to account for this space, but not all powerpc platforms usesimple_alloc_init(). So for those platforms it's a waste.Yeah I don't really like the sound of that. We could do it if it was behind a CONFIG option, but hopefully there is a better solution.
Quoted 3 lines
Another alternative is to alter the bootloader to place more space between the kernel image and initrd image.
Quoted 7 lines
Quoted 3 lines
I wanted to get some feedback on the right way to fix this. It seems like it could be a generic issue on powerpc, or it's possibly already fixed someplace and I just haven't noticed.
I don't really know that code very well. But ideally either the boot loader gives you space, or the platform boot code is smart enough to detect that there is insufficient room and puts the heap somewhere else.
It seems like the kernel should be able to handle it. I believe the bootloader passes the initrd location , but I don't think it's evaluated till later in the boot up. For simple_alloc_init() it seems all platforms just assume the space is empty without checking.
Daniel
Quoted 4 lines · On Mon, 2016-01-11 at 08:49 -0800, [email protected] wrote:
Quoted 3 lines · Michael Ellerman
Quoted 2 lines · On Fri, 2016-01-08 at 09:45 -0800, [email protected] wrote:
Hi,
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
A powerpc machine I'm working on has this problem where the
simple_alloc_init()area is trampling the initrd. The two are placed fairly close together.Which machine / platform?
It's not upstream yet. I'm still putting the patches together, that's when this issue came up. I can send an RFC if you want to look at the patches.
OK. Thanks but I don't need more patches to look at :)
I was just trying to narrow down which code you were talking about.
Quoted 7 lines
Quoted 3 lines
I don't really know that code very well. But ideally either the boot loader gives you space, or the platform boot code is smart enough to detect that there is insufficient room and puts the heap somewhere else.
It seems like the kernel should be able to handle it. I believe the bootloader passes the initrd location , but I don't think it's evaluated till later in the boot up. For
simple_alloc_init()it seems all platforms just assume the space is empty without checking.
Yeah that's what I see too, which seems like it's liable to break, but obviously hasn't for anyone else yet.
The bootloader must pass the initrd location, otherwise the kernel can't use it, so it seems like the kernel should be able to notice when they are too close. But it may be complicated by the sequencing of the code.
cheers
Quoted 9 lines · Michael Ellerman
Quoted 8 lines · On Mon, 2016-01-11 at 08:49 -0800, [email protected] wrote:
Quoted 7 lines · Michael Ellerman
Quoted 5 lines · On Fri, 2016-01-08 at 09:45 -0800, [email protected] wrote:
Hi,
A powerpc machine I'm working on has this problem where the
simple_alloc_init()area is trampling the initrd. The two are placed fairly close together.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Which machine / platform?
It's not upstream yet. I'm still putting the patches together, that's when this issue came up. I can send an RFC if you want to look at the patches.
OK. Thanks but I don't need more patches to look at :)
I was just trying to narrow down which code you were talking about.
It's coming eventually anyways ;) ..
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
I don't really know that code very well. But ideally either the boot loader gives you space, or the platform boot code is smart enough to detect that there is insufficient room and puts the heap somewhere else.
It seems like the kernel should be able to handle it. I believe the bootloader passes the initrd location , but I don't think it's evaluated till later in the boot up. For
simple_alloc_init()it seems all platforms just assume the space is empty without checking.
Quoted 6 lines
Yeah that's what I see too, which seems like it's liable to break, but obviously hasn't for anyone else yet.
The bootloader must pass the initrd location, otherwise the kernel can't use it, so it seems like the kernel should be able to notice when they are too close. But it may be complicated by the sequencing of the code.
I found a similar one,
arch/powerpc/boot/ps3.c:platform_init()
I realized that in platform_init() your discovering the initrd location, so you do have access to the values. In ps3 you can see how if the initrd is placed in the 16megs after the kernel image then the simple_alloc code could corrupt it.
I think it would be appropriate to check the initrd location in that function (since it's available) and make a choice to put the simple_alloc area after the initrd if the areas overlap. Does that make sense ?
Daniel
Quoted 10 lines · On Mon, 2016-01-11 at 15:07 -0800, [email protected] wrote:
Quoted 9 lines · Michael Ellerman
Quoted 8 lines · On Mon, 2016-01-11 at 08:49 -0800, [email protected] wrote:
Quoted 6 lines · Michael Ellerman
Quoted 3 lines · On Fri, 2016-01-08 at 09:45 -0800, [email protected] wrote:
A powerpc machine I'm working on has this problem where the
simple_alloc_init()area is trampling the initrd. The two are placed fairly close together.Which machine / platform?
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
It's not upstream yet. I'm still putting the patches together, that's when this issue came up. I can send an RFC if you want to look at the patches.
OK. Thanks but I don't need more patches to look at :)
I was just trying to narrow down which code you were talking about.
It's coming eventually anyways ;) ..
Hah, yeah I know :)
Quoted 19 lines
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
I don't really know that code very well. But ideally either the boot loader gives you space, or the platform boot code is smart enough to detect that there is insufficient room and puts the heap somewhere else.
It seems like the kernel should be able to handle it. I believe the bootloader passes the initrd location , but I don't think it's evaluated till later in the boot up. For
simple_alloc_init()it seems all platforms just assume the space is empty without checking.Quoted 6 lines
Yeah that's what I see too, which seems like it's liable to break, but obviously hasn't for anyone else yet.
The bootloader must pass the initrd location, otherwise the kernel can't use it, so it seems like the kernel should be able to notice when they are too close. But it may be complicated by the sequencing of the code.
I found a similar one,
arch/powerpc/boot/ps3.c:platform_init()
Quoted 7 lines
I realized that in
platform_init()your discovering the initrd location, so you do have access to the values. In ps3 you can see how if the initrd is placed in the 16megs after the kernel image then thesimple_alloccode could corrupt it.I think it would be appropriate to check the initrd location in that function (since it's available) and make a choice to put the
simple_allocarea after the initrd if the areas overlap. Does that make sense ?
Hmm, maybe. I think the ps3 code knows at link time where the initrd is, so that's kind of cheating.
But if on your platform you can find out the initrd location early enough, then yes ideally you take that into account when initialising the allocator.
cheers