example GATT code to talk with a sensortag
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Thanks!
Cheers,
Don
Hello Don,
Quoted 7 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
Quoted 8 lines
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Thanks!
Cheers,
Don
I'm a bit of a newbie myself although maybe slightly further down the path than you.
I've done some Python to communicate between a Raspberry Pi and a Sensor tag. A short video about the experiment is at
https://youtu.be/1ZvFdX5bA8k
My intention is to clean up the code and post it to
https://github.com/ukBaz/python-bluezero within the next couple of weeks so keep an eye on the repository.
Regards,
Barry
Luiz Augusto von Dentz
maintainerHi Don,
Quoted 7 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
Quoted 7 lines
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Thanks!
Cheers,
Don
bluetoothctl has some generic support for GATT attributes, in addition we have some examples in python under test/example-gatt-client and test/example-gatt-server.
Signature · 1 line
Luiz Augusto von Dentz
Quoted 13 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 10 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Quoted 8 lines
Quoted 4 lines
Thanks!
Cheers,
Donbluetoothctl has some generic support for GATT attributes, in addition we have some examples in python under test/example-gatt-client and test/example-gatt-server.
Hi Luis,
Perfect, thanks!!
Cheers,
Don
Quoted 13 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 10 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Quoted 8 lines
Quoted 4 lines
Thanks!
Cheers,
Donbluetoothctl has some generic support for GATT attributes, in addition we have some examples in python under test/example-gatt-client and test/example-gatt-server.
Hi Luiz,
Hmm, the example program complains about no such interface 'org.bluez.GattService1'.
Originally I thought that was a generic bluez interface but now I am wondering if that was specific to the example program.
Any tip on what the expected interface should be (so I know what to add)?
(by the way, I am using bluez-5.36 if that helps)
Cheers,
Don
Luiz Augusto von Dentz
maintainerHi Don,
Quoted 25 lines · Don Zickus
Quoted 13 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 10 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Quoted 8 lines
Quoted 4 lines
Thanks!
Cheers,
Donbluetoothctl has some generic support for GATT attributes, in addition we have some examples in python under test/example-gatt-client and test/example-gatt-server.
Hi Luiz,
Quoted 8 lines
Hmm, the example program complains about no such interface 'org.bluez.GattService1'.
Originally I thought that was a generic bluez interface but now I am wondering if that was specific to the example program.
Any tip on what the expected interface should be (so I know what to add)?
(by the way, I am using bluez-5.36 if that helps)
You will need to pass -E to bluetoothd to enable the experimental intefaces, btw there is a recent change to GATT server/peripheral so I suggest you try with the current version on git.
Signature · 1 line
Luiz Augusto von Dentz
Quoted 25 lines · Don Zickus
Quoted 23 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 18 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able
to communicate with it using the gatttool. Now I am trying to figure out
how to build an app around that. Googling has shown me lots of examples of
folks using expect scripts (around the gatttool).I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Thanks!
Cheers,
Don
Quoted 8 lines
Quoted 4 lines
bluetoothctl has some generic support for GATT attributes, in addition
we have some examples in python under test/example-gatt-client and test/example-gatt-server.Hi Luis,
Perfect, thanks!!
Let me know how far you manage to get. I have one such device from "Proximo" which I was hoping to be able to use.
Cheers
Quoted 33 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 30 lines · Don Zickus
Quoted 13 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 10 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able to communicate with it using the gatttool. Now I am trying to figure out how to build an app around that. Googling has shown me lots of examples of folks using expect scripts (around the gatttool).
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Quoted 8 lines
Quoted 4 lines
Thanks!
Cheers,
Donbluetoothctl has some generic support for GATT attributes, in addition we have some examples in python under test/example-gatt-client and test/example-gatt-server.
Hi Luiz,
Hmm, the example program complains about no such interface 'org.bluez.GattService1'.
Originally I thought that was a generic bluez interface but now I am wondering if that was specific to the example program.
Quoted 8 lines
Quoted 3 lines
Any tip on what the expected interface should be (so I know what to add)?
(by the way, I am using bluez-5.36 if that helps)
You will need to pass -E to bluetoothd to enable the experimental intefaces, btw there is a recent change to GATT server/peripheral so I suggest you try with the current version on git.
Hi Luiz,
Thanks for the tip! I will play with that and see how far I get.
Cheers,
Don
Quoted 31 lines · Bastien Nocera
Quoted 30 lines · Don Zickus
Quoted 27 lines · Luiz Augusto von Dentz
Hi Don,
Quoted 10 lines · Don Zickus
Hi,
Sorry for the newbie question. I stumbled upon a TI sensortag and was able
to communicate with it using the gatttool. Now I am trying to figure out
how to build an app around that. Googling has shown me lots of examples of
folks using expect scripts (around the gatttool).Quoted 8 lines
I was hoping for something in C or python. Is there an example program/script around that I can copy and expand to get me started?
Thanks!
Cheers,
Donbluetoothctl has some generic support for GATT attributes, in addition
we have some examples in python under test/example-gatt-client and test/example-gatt-server.
Quoted 6 lines
Quoted 3 lines
Hi Luis,
Perfect, thanks!!
Let me know how far you manage to get. I have one such device from "Proximo" which I was hoping to be able to use.
No problem. :-)
Cheers,
Don
Quoted 6 lines · Luiz Augusto von Dentz
Hi Don,
You will need to pass -E to bluetoothd to enable the experimental intefaces, btw there is a recent change to GATT server/peripheral so I suggest you try with the current version on git.
Hi Luiz,
I passed the -E and compiled and installed the latest git version of bluez
commit e81aeaea21db84042ee0c30159290ca56d250111
Author: Luiz Augusto von Dentz <[email protected]> Date: Wed Jan 6 12:20:45 2016 -0300
I installed d-feet to help me with the d-bus interfaces as I was struggling with that. With the -E option I now see 'GattManager1' pop up under '/org/bluez/hci0'.
I guess I was expecting to see a 'GattService1' and 'GattCharacteristic1', but I don't.
I tried poking the 'GetAll' interfaces under my device '/org/bluez/hci0/dev_XXXXXX' using 'org.bluez.Device1' as my interface. That got me some device info but my UUIDs were empty []. I tried using the 'Connect' Method in the same interface but that didn't seem to change anything.
I am scratching my head trying to understand how this works. Looking through the documentation in the bluez tree it appears I need a gatt-server that provides 'GattServices1'? Did I read that wrong?
Again, my goal was to simply read temperature data out of my sensor. I know the UUID and the handle (from my successful use of the gatttool), I just don't know how to connect to the DBus correctly??? to get the same info.
Perhaps I falsely assumed that if gatttool can get it, then there was an interface that I can use to get the same info.
I apologize for all the newbie questions. And thank you for your patience and help so far.
Cheers,
Don
Hi Don,
Quoted 16 lines · Don Zickus
Quoted 6 lines · Luiz Augusto von Dentz
Hi Don,
You will need to pass -E to bluetoothd to enable the experimental intefaces, btw there is a recent change to GATT server/peripheral so I suggest you try with the current version on git.
Hi Luiz,
I passed the -E and compiled and installed the latest git version of bluez
commit
e81aeaea21db84042ee0c30159290ca56d250111Author: Luiz Augusto von Dentz <[email protected]> Date: Wed Jan 6 12:20:45 2016 -0300
Quoted 7 lines
I installed d-feet to help me with the d-bus interfaces as I was struggling with that. With the -E option I now see 'GattManager1' pop up under '/org/bluez/hci0'.
I guess I was expecting to see a 'GattService1' and 'GattCharacteristic1', but I don't.
Start discovery from org.bluez.Adapter1. After that find device object of your device. Then connect to this device form org.bluez.Device1. Once connected GattServices and GattCharacteristincs should be visible for you.
All this you can do with d-feet of course.
Also, run btmon so you can see HCI traffic. In case it still does not work, you can
try shate btmon log here.
Quoted 14 lines
I tried poking the 'GetAll' interfaces under my device '/org/bluez/hci0/dev_XXXXXX' using 'org.bluez.Device1' as my interface. That got me some device info but my UUIDs were empty []. I tried using the 'Connect' Method in the same interface but that didn't seem to change anything.
I am scratching my head trying to understand how this works. Looking through the documentation in the bluez tree it appears I need a gatt-server that provides 'GattServices1'? Did I read that wrong?
Again, my goal was to simply read temperature data out of my sensor. I know the UUID and the handle (from my successful use of the gatttool), I just don't know how to connect to the DBus correctly??? to get the same info.
Quoted 9 lines
Perhaps I falsely assumed that if gatttool can get it, then there was an interface that I can use to get the same info.
I apologize for all the newbie questions. And thank you for your patience and help so far.
Cheers,
Don
BR
Lukasz
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
BR / Pozdrawiam Łukasz
Quoted 26 lines · Łukasz Rymanowski
Hi Don,
Quoted 23 lines · Don Zickus
Quoted 6 lines · Luiz Augusto von Dentz
Hi Don,
You will need to pass -E to bluetoothd to enable the experimental intefaces, btw there is a recent change to GATT server/peripheral so I suggest you try with the current version on git.
Hi Luiz,
I passed the -E and compiled and installed the latest git version of bluez
commit
e81aeaea21db84042ee0c30159290ca56d250111Author: Luiz Augusto von Dentz <[email protected]> Date: Wed Jan 6 12:20:45 2016 -0300I installed d-feet to help me with the d-bus interfaces as I was struggling with that. With the -E option I now see 'GattManager1' pop up under '/org/bluez/hci0'.
I guess I was expecting to see a 'GattService1' and 'GattCharacteristic1', but I don't.
Hi Łukasz,
Thanks for the feedback!
Quoted 6 lines
Start discovery from org.bluez.Adapter1. After that find device object of your device. Then connect to this device form org.bluez.Device1. Once connected GattServices and GattCharacteristincs should be visible for you.
All this you can do with d-feet of course.
So, I tried your suggestions from within d-feet and made good progress, but I don't think I am quite there yet. Here is what I did inside d-feet:
Under /org/bluez/hci0 -> Interfaces -> org.bluez.Adapter1 -> Methods -> StartDiscovery --> double clicked and 'executed' this
Under /org/bluez/hci0/dev_XXXXX -> Interfaces -> org.bluez.Device1 -> Methods -> Connect --> double clicked and 'executed' this
Under /org/bluez/hci0/dev_XXXX -> Interfaces -> org.freedesktop.DBus.Properties -> GetAll ---> double clicked, entered '"org.bluez.Device1"' and 'executed' this
---> received valid UUIDs, GattServices, etc as output
Thank you!
I did _not_ see GattCharacteristic1 in the output, nor do I see either GattService or GattCharacteristic1 show up as an interface in either /org/bluez/hci0/dev_XXXXX or /org/bluez/hci0.
Did I miss a step or misunderstand your suggestion?
Cheers,
Don
Hi Don,
Quoted 56 lines · Don Zickus
Quoted 26 lines · Łukasz Rymanowski
Hi Don,
Quoted 23 lines · Don Zickus
Quoted 6 lines · Luiz Augusto von Dentz
Hi Don,
You will need to pass -E to bluetoothd to enable the experimental intefaces, btw there is a recent change to GATT server/peripheral so I suggest you try with the current version on git.
Hi Luiz,
I passed the -E and compiled and installed the latest git version of bluez
commit
e81aeaea21db84042ee0c30159290ca56d250111Author: Luiz Augusto von Dentz <[email protected]> Date: Wed Jan 6 12:20:45 2016 -0300I installed d-feet to help me with the d-bus interfaces as I was struggling with that. With the -E option I now see 'GattManager1' pop up under '/org/bluez/hci0'.
I guess I was expecting to see a 'GattService1' and 'GattCharacteristic1', but I don't.
Hi Łukasz,
Thanks for the feedback!
Quoted 6 lines
Start discovery from org.bluez.Adapter1. After that find device object of your device. Then connect to this device form org.bluez.Device1. Once connected GattServices and GattCharacteristincs should be visible for you.
All this you can do with d-feet of course.
So, I tried your suggestions from within d-feet and made good progress, but I don't think I am quite there yet. Here is what I did inside d-feet:
Under /org/bluez/hci0 -> Interfaces -> org.bluez.Adapter1 -> Methods -> StartDiscovery --> double clicked and 'executed' this
Under /org/bluez/hci0/dev_XXXXX -> Interfaces -> org.bluez.Device1 -> Methods -> Connect --> double clicked and 'executed' this
Under /org/bluez/hci0/dev_XXXX -> Interfaces -> org.freedesktop.DBus.Properties -> GetAll ---> double clicked, entered '"org.bluez.Device1"' and 'executed' this
---> received valid UUIDs, GattServices, etc as outputThank you!
Quoted 6 lines
I did _not_ see GattCharacteristic1 in the output, nor do I see either GattService or GattCharacteristic1 show up as an interface in either /org/bluez/hci0/dev_XXXXX or /org/bluez/hci0.
Did I miss a step or misunderstand your suggestion?
You got it well.
To be more clear.
If your bluetoothd runs with -E option and you connect to BLE device which expose any GATT services, after connect you should see new objects paths. Smth like this:
a) /org/bluez/hci0/dev_XXXXX/servicexxxx
b) /org/bluez/hci0/dev_XXXXX/servicexxxx/charyyyy
c) /org/bluez/hci0/dev_XXXXX/servicexxxx/charzzzz
etc.
Inside a) you should see GattService1 and inside b) and c) GattCharacteristic1
Just make sure -E is there and if still not work, provide btmon.log
Quoted 4 lines
Cheers,
Don
Signature · 2 lines
BR / Pozdrawiam Łukasz
Quoted 20 lines · Łukasz Rymanowski
Quoted 9 lines
Thank you!
I did _not_ see GattCharacteristic1 in the output, nor do I see either GattService or GattCharacteristic1 show up as an interface in either /org/bluez/hci0/dev_XXXXX or /org/bluez/hci0.
Did I miss a step or misunderstand your suggestion?
You got it well.
To be more clear.
If your bluetoothd runs with -E option and you connect to BLE device which expose any GATT services, after connect you should see new objects paths. Smth like this:a) /org/bluez/hci0/dev_XXXXX/servicexxxx
b) /org/bluez/hci0/dev_XXXXX/servicexxxx/charyyyy
c) /org/bluez/hci0/dev_XXXXX/servicexxxx/charzzzz
Quoted 5 lines
etc.
Inside a) you should see GattService1 and inside b) and c) GattCharacteristic1
Just make sure -E is there and if still not work, provide btmon.log
Some days are better than others. After rebooting yesterday, my bluetooth device stopped working... so while I am excited to test your suggestion, I am stuck trying to make it work again. So I apologize if my response comes later. I do appreciate the tips and patience!
Hopefully tomorrow things will work again.. :-/
Cheers,
Don
Quoted 40 lines · Łukasz Rymanowski
Quoted 23 lines
Quoted 5 lines
Start discovery from org.bluez.Adapter1. After that find device object of your device. Then connect to this device form org.bluez.Device1. Once connected GattServices and GattCharacteristincs should be visible for you.
All this you can do with d-feet of course.
So, I tried your suggestions from within d-feet and made good progress, but I don't think I am quite there yet. Here is what I did inside d-feet:
Under /org/bluez/hci0 -> Interfaces -> org.bluez.Adapter1 -> Methods -> StartDiscovery --> double clicked and 'executed' this
Under /org/bluez/hci0/dev_XXXXX -> Interfaces -> org.bluez.Device1 -> Methods -> Connect --> double clicked and 'executed' this
Under /org/bluez/hci0/dev_XXXX -> Interfaces -> org.freedesktop.DBus.Properties -> GetAll ---> double clicked, entered '"org.bluez.Device1"' and 'executed' this
---> received valid UUIDs, GattServices, etc as outputThank you!
Quoted 6 lines
I did _not_ see GattCharacteristic1 in the output, nor do I see either GattService or GattCharacteristic1 show up as an interface in either /org/bluez/hci0/dev_XXXXX or /org/bluez/hci0.
Did I miss a step or misunderstand your suggestion?
You got it well.
To be more clear.
If your bluetoothd runs with -E option and you connect to BLE device which expose any GATT services, after connect you should see new objects paths. Smth like this:a) /org/bluez/hci0/dev_XXXXX/servicexxxx
b) /org/bluez/hci0/dev_XXXXX/servicexxxx/charyyyy
c) /org/bluez/hci0/dev_XXXXX/servicexxxx/charzzzz
Quoted 5 lines
etc.
Inside a) you should see GattService1 and inside b) and c) GattCharacteristic1
Just make sure -E is there and if still not work, provide btmon.log
Hi Łukasz,
Yup, I see those now and the expected GattService1/Characteristic1 interfaces.
Thanks! I'll use that with the example-gatt-client to get me going. Thanks again!
Cheers,
Don
Quoted 13 lines · Łukasz Rymanowski
Hi Don,
Quoted 1 line
Did I miss a step or misunderstand your suggestion?
You got it well.
To be more clear.
If your bluetoothd runs with -E option and you connect to BLE device which expose any GATT services, after connect you should see new objects paths. Smth like this:a) /org/bluez/hci0/dev_XXXXX/servicexxxx
b) /org/bluez/hci0/dev_XXXXX/servicexxxx/charyyyy
c) /org/bluez/hci0/dev_XXXXX/servicexxxx/charzzzz
Quoted 5 lines
etc.
Inside a) you should see GattService1 and inside b) and c) GattCharacteristic1
Just make sure -E is there and if still not work, provide btmon.log
Hi Łukasz,
Sorry to bother you again. I am trying to turn what I learned from d-feet into something for python. I can get UUIDs from the GetAll() command, but no GattService info. I then noticed the device is not connected. So I tried connecting it using the Connect() command. It keeps timing out.
There isn't much fomr btmon, but it looks useful so I attached it below. Help?
I tried doing this under bluetootctl too and had some strange timeout requests. When I execute 'connect xx:xx:xx', it seems to connect, start dumping info, then disconnects with an error/timeout.
Cheers,
Don
python snippet..
service = bus.get_object(BLUEZ_SERVICE_NAME, "/org/bluez/hci0/dev_68_C9_0B_06_FA_8A") service.Connect(dbus_interface="org.bluez.Device1")
service_props = service.GetAll("org.bluez.Device1", dbus_interface=DBUS_PROP_IFACE)
btmon output
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 [hci0] 374.345329
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 374.346096
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 374.346190
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 374.347102
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 414.345224
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 414.347154
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)python failure message:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Quoted 11 lines · Bastien Nocera
Quoted 8 lines
Quoted 4 lines
bluetoothctl has some generic support for GATT attributes, in addition
we have some examples in python under test/example-gatt-client and test/example-gatt-server.Hi Luis,
Perfect, thanks!!
Let me know how far you manage to get. I have one such device from "Proximo" which I was hoping to be able to use.
Hi Bastien,
Sorry for the late reply. We have had this script working for awhile now. It is menu driven. Just select 'find devices' and then select your device to have it dump out a table. It is very minimalistic but you can get the point (I hope :-) ).
Cheers,
Don
================================
#!/usr/bin/python
import argparse
import dbus
import gobject
import sys
import pprint
import time
import traceback
from dbus.mainloop.glib import DBusGMainLoop
# defines ADAPTER_IFACE = 'org.bluez.Adapter1' BLUEZ_SERVICE_NAME = 'org.bluez' DBUS_OM_IFACE = 'org.freedesktop.DBus.ObjectManager' DBUS_PROP_IFACE = 'org.freedesktop.DBus.Properties' DEVICE_IFACE = 'org.bluez.Device1' GATT_SERVICE_IFACE = 'org.bluez.GattService1' GATT_CHRC_IFACE = 'org.bluez.GattCharacteristic1'
# global g_bus = None g_mainloop = None
def init_global():
global g_bus
g_bus = dbus.SystemBus()
global g_mainloop
g_mainloop = gobject.MainLoop()
# bluez utility functions
def get_device_interface(object_path):
proxy = g_bus.get_object(BLUEZ_SERVICE_NAME, object_path)
dev_interface = dbus.Interface(proxy, DEVICE_IFACE)
return dev_interfacedef get_device_property(object_path, property):
dbus_interface = get_dbus_prop_interface(object_path) prop = dbus_interface.Get(DEVICE_IFACE, property) return prop
def get_dbus_prop_interface(object_path):
proxy = g_bus.get_object(BLUEZ_SERVICE_NAME, object_path) dbus_interface = dbus.Interface(proxy, DBUS_PROP_IFACE) return dbus_interface
def get_gatt_svc_interface(object_path):
proxy = g_bus.get_object(BLUEZ_SERVICE_NAME, object_path) gatt_interface = dbus.Interface(proxy, GATT_CHRC_IFACE) return gatt_interface
def get_dbus_manager():
manager = dbus.Interface(g_bus.get_object(BLUEZ_SERVICE_NAME, "/"),
DBUS_OM_IFACE)
return manager
def get_managed_objects():
manager = get_dbus_manager()
objects = manager.GetManagedObjects()
return objects
# generic callbacks
def generic_error_cb(error):
print('D-Bus call failed: ' + str(error))
g_mainloop.quit()
def interfaces_removed_cb(object_path, interfaces):
print "interfaces_removed_cb: %s" % object_path
# Generic BT Device (hopefully)
class BTDevice:
"""manager of cc2260"""
def __init__(self, service_path):
print "path = %s" % service_path
self.object_path = service_path
s1 = service_path
s2 = 'dev_'
address = s1[s1.index(s2) + len(s2):]
self.address = address.replace('_', ':')
self.notify_count = 0
self.gatt_service_retry = True
def get_all(self):
dbus_interface = get_dbus_prop_interface(self.object_path) try:
self.service_props = dbus_interface.GetAll(DEVICE_IFACE) print "\nName: %s" % self.service_props['Name'] print "Adapter: %s\n" % self.service_props['Adapter']
except:
self.service_props = None
self.disconnect()
def get_uuids(self):
self.uuids = []
if self.service_props:
if 'UUIDs' in self.service_props:
self.uuids = self.service_props['UUIDs']
print "there are %d primary uuids:" % len(self.uuids) for u in self.uuids:
print " %s" % u
def get_gatt_services(self):
# GattServices are not always immediately present
# perhaps we could drive the mainloop here and wait
# for them to appear, but for now the hack solution
# is to sleep for up to 10 seconds
# BUG: sometimes the sensor requires a reset to resolve # this issue
if 'GattServices' not in self.service_props:
wait = 10
print "\nwaiting %d seconds for gatt services to materialize" \
% wait
time.sleep(wait)
self.get_all()
if 'GattServices' in self.service_props:
self.gatt_services = self.service_props['GattServices']
else:
self.gatt_services = []
print "there are %d gatt_services" % len(self.gatt_services) if not self.gatt_services:
if self.gatt_service_retry:
# avoid infinite recursion self.gatt_service_retry = False
print "timing failure -> retry" self.get_gatt_services()
else:
print "unable to locate gatt_services -> Failure" sys.exit(-1)
else:
for svc in self.gatt_services:
print " %s" % svc
def exists(self):
found = False
objects = get_managed_objects()
for path, ifaces in objects.iteritems():
if path == self.object_path:
found = True
break
return found
def connected(self):
_connected = get_device_property(self.object_path, 'Connected') return _connected
def connect(self):
if not self.connected():
dev_interface = get_device_interface(self.object_path) print "\nattempting to connect to %s" % self.object_path try:
dev_interface.Connect()
print "connected"
except:
print(traceback.format_exc())
raise Exception("unable to connect to device")
def disconnect(self):
if self.connected():
dev_interface = get_device_interface(self.object_path) if dev_interface:
print "\nattempting to disconnect..."
try:
dev_interface.Disconnect()
except:
print(traceback.format_exc())
raise Exception("unable to disconnect to device")
else:
# don't see how this can happen if connected returned # True -> perhaps a race condition
raise Exception("device does not exist")
print "disconnected!!!!!!\n"
def sensor_cb(self, iface, changed_props, invalidated_props):
if iface != DEVICE_IFACE:
return
# check to see if Connected property has changed connected = changed_props.get('Connected') if connected is None:
return
# it has -> probably means not connected print "Connected status is now %s" % connected if not connected:
print "device is no longer connected" g_mainloop.quit()
class BTAdapter:
def __init__(self):
adapters = []
self.om = dbus.Interface(g_bus.get_object(BLUEZ_SERVICE_NAME, '/'),
DBUS_OM_IFACE)
objects = self.om.GetManagedObjects()
for path, interfaces in objects.iteritems():
if ADAPTER_IFACE not in interfaces:
continue
#self.print_field('Adapter', path) adapters.append(path)
if not adapters:
raise Exception("No adapters located")
if len(adapters) > 1:
raise Exception("More than one adapter located")
self.path = adapters[0]
proxy = g_bus.get_object(BLUEZ_SERVICE_NAME, adapters[0]) self.interface = dbus.Interface(proxy, ADAPTER_IFACE) self.target_path = None
self.devices = {}
self.disco_duration = 60
self.disco_interval = 5
return
def print_field(self, field, value):
print "%-10s: %s" % (field, value)
def print_val(self, props, key, convert=False):
if key in props:
if convert:
self.print_field(key, hex(int(props[key])))
else:
self.print_field(key, props[key])
def get_devices(self):
objects = self.om.GetManagedObjects() for path, interfaces in objects.iteritems():
if DEVICE_IFACE not in interfaces:
continue
props = interfaces[DEVICE_IFACE] self.devices[path] = props
return self.devices
def list_devices_summary(self):
print
self.get_devices()
idx = 1
for device in self.devices:
props = self.devices[device]
print "%s: %-40s: %s" % (repr(idx), props['Name'], device) idx = idx + 1
print
def list_devices_details(self):
self.get_devices()
for device in self.devices:
props = self.devices[device] self.print_field("Path", device) self.print_val(props, 'Name') self.print_val(props, 'Alias') self.print_val(props, 'Address') self.print_val(props, 'Class', True) self.print_val(props, 'Icon') self.print_val(props, 'Adapter') self.print_val(props, 'Connected') if 'UUIDs' in props:
for uuid in props['UUIDs']:
self.print_field('UUID', uuid)
print
def properties_cb(self, iface, changed_props, invalidated_props):
print "properties_cb"
print changed_props
print invalidates_props
def start_discovery_timeout_cb(self):
sys.stdout.write('*')
sys.stdout.flush()
self.disco_count = self.disco_count + 1
if self.disco_count * self.disco_interval >= self.disco_duration:
# discovery is complete
g_mainloop.quit()
return False
return True
def interface_added(self, object_path, interfaces):
if DEVICE_IFACE in interfaces:
if object_path not in self.devices:
self.discovered.append(object_path)
def interface_removed(self, object_path, interfaces):
if DEVICE_IFACE in interfaces:
print "removed interface %s" % object_path
def start_discovery(self):
self.om.connect_to_signal('InterfacesAdded', self.interface_added) self.om.connect_to_signal('InterfacesRemoved', self.interface_removed) self.om.connect_to_signal("PropertiesChanged", self.properties_cb) # start a timer, this will run forever otherwise self.timer_id = gobject.timeout_add(self.disco_interval * 1000,
self.start_discovery_timeout_cb)
self.discovered = list()
self.disco_count = 0
print
print "START DISCOVERY - this operation will take %s seconds to " \
"complete" % self.disco_duration
self.interface.StartDiscovery()
try:
g_mainloop.run()
except:
print(traceback.format_exc())
sys.exit(-1)
self.interface.StopDiscovery()
print
if not self.discovered:
print "no devices were found during discovery"
else:
for d in self.discovered:
print "discovered: %s" % d
print "DISCOVERY COMPLETE"
print
return
def find_device(self, object_path):
self.om.connect_to_signal('InterfacesAdded', self.find_device_cb) self.target_path = object_path self.interface.StartDiscovery()
print "attempting discovery for specific device"
try:
g_mainloop.run()
except KeyboardInterrupt:
print "\n"
return
def find_device_cb(self, object_path, interfaces):
print "find_device_cb: %s" % object_path print "target_path = %s" % self.target_path if object_path == self.target_path:
print "found device: %s" % object_path g_mainloop.quit()
def list_options(d):
min_opt = 1
optno = 0
optlist = list()
print
print "please choose a device or option from the following menu:" print
first = True
for path in d:
props = d[path]
# if the device doesn't have a name - we don't care about it if 'Name' not in props:
continue
optno = optno + 1
print "%s: %-40s: %s" % (repr(optno), props['Name'], path) optlist.append(path)
optno = optno + 1
print "%s: %s" % (repr(optno), "perform bluetooth discovery")
optno = optno + 1
print "%s: exit program" % repr(optno)
max_opt = optno
return (min_opt, max_opt, optlist)
def get_answer(optinfo):
minval = optinfo[0]
maxval = optinfo[1]
paths = optinfo[2]
ans = 0
while ans < minval or ans > maxval:
ans = raw_input("please enter a value from %d to %d: " %
(minval, maxval))
try:
ans = int(ans)
except:
pass
if ans == maxval:
path = "EXIT"
elif ans == (maxval - 1):
path = "DISCO"
else:
path = paths[ans-1]
return path
def main():
# Set up the main loop.
DBusGMainLoop(set_as_default=True)
init_global()
adapter = BTAdapter()
done = False
path = None
# figure out what device the user wants to test with while not done:
devices = adapter.get_devices()
optinfo = list_options(devices)
option = get_answer(optinfo)
if option == "EXIT":
done = True
elif option == "DISCO":
adapter.start_discovery()
else:
done = True
path = option
# has the user selected a device
if path:
print
print "processing device %s" % path
print
device = BTDevice(path)
device.connect()
device.get_all()
device.get_uuids()
device.get_gatt_services()
device.disconnect()
return
if __name__ == '__main__':
main()