Skip to contentSkip to conversation

gpio: Add GPIO support for the WinSystems WS16C48

PATCH Superseded William Breathitt Gray 1 participant 1 message Jan 20, 2016

Subsystems (2)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 gpio: Add GPIO support for the WinSystems WS16C48

The WinSystems WS16C48 device provides 48 lines of digital I/O. In addition, the first 24 lines may be used for interrupt-handled edge detection; rising edge detection and falling edge detection are supported.

This driver provides GPIO and IRQ support for these 48 channels of digital I/O. The base port address for the device may be configured via the ws16c48_base module parameter. The interrupt line number for the device may be configured via the ws16c48_irq module parameter.

---
Changes in v4:
- Return IRQ_NONE if device did not generate interrupt

 MAINTAINERS                 |   6 +
 drivers/gpio/Kconfig        |   9 +
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/gpio-ws16c48.c | 435 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 451 insertions(+)
 create mode 100644 drivers/gpio/gpio-ws16c48.c
MAINTAINERS +6 -0
index 4d7d83c..1cdb661 100644
@@ -11659,6 +11659,12 @@ M:	David Härdeman <[email protected]>
 S:	Maintained
 F:	drivers/media/rc/winbond-cir.c
 
+WINSYSTEMS WS16C48 GPIO DRIVER
+M:	William Breathitt Gray <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/gpio/gpio-ws16c48.c
+
 WIMAX STACK
 M:	Inaky Perez-Gonzalez <[email protected]>
 M:	[email protected]
drivers/gpio/Kconfig +9 -0
index cb212eb..b391139 100644
@@ -577,6 +577,15 @@ config GPIO_TS5500
 	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
 	  LCD port.
 
+config GPIO_WS16C48
+	tristate "WinSystems WS16C48 GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the WinSystems WS16C48. The base port address
+	  for the device may be configured via the ws16c48_base module
+	  parameter. The interrupt line number for the device may be configured
+	  via the ws16c48_irq module parameter.
+
 endmenu
 
 menu "I2C GPIO expanders"
drivers/gpio/Makefile +1 -0
index 548e9b5..bcb6cbe 100644
@@ -112,6 +112,7 @@ obj-$(CONFIG_GPIO_VX855)	+= gpio-vx855.o
 obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
 obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
+obj-$(CONFIG_GPIO_WS16C48)	+= gpio-ws16c48.o
 obj-$(CONFIG_GPIO_XGENE)	+= gpio-xgene.o
 obj-$(CONFIG_GPIO_XGENE_SB)	+= gpio-xgene-sb.o
 obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
drivers/gpio/gpio-ws16c48.c new file +435 -0

435 lines not on this page · raw message

Signature · 6 lines
2.4.10

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html